Photos and Keyframes
Hi,
I cannot understand the manual. What I am attempting to prior to the movie clips is enter about 10 photos coming in from different corners at 10% size to the middle at 100% and mybe spinning 360deg as well.
I require some simple terms to apply this please.
Jimbo
See this post for ideas:
https://discussions.apple.com/message/1063183#1063183
Al
Similar Messages
-
Is there a script (or plugin) that will take a photo and break it up into parts?
Is there a script or plug-in out there that will take a picture and break it up into various parts (squares for example.) The idea would be that you could automate and rapidly create a photo collage of a single image. (See examples of what I mean in attached pics.)
Thanks!
This image has been resized to fit in the page. Click to enlarge.
You get the idea.OK, I'm going to edit this post now that I'm at a computer with an actual step by step.
Create a new comp the size of you our final delivered project.
Add a photo to the timeline
Note the size of the photo and the scale to position the photo at it's final resting place
Calculate twice the height and width of the photo and create a new solid that is this size
Place the solid above the photo
Create a mask in the solid at the exact center that is the size shape you want for your photo frame
Either invert the mask or set the mask property to Subtract to reveal a small portion of the photo
Set the solid as a alpha inverted track matte for the photo (you should now see only a portion of the photo
Add a rectangular shape layer with only a stroke to act as the photo frame over the mask. You may have to use two shapes or create a mask on a shape if you want to simulate polaroids
Make the shape layer the parent of the solid you are using as a track matte so the matte will stay lined up with the frame
Here comes the fun, select all layers and duplicate them using Ctrl/Cmnd + D
Immediately hold down Shift + Ctrl/Cmnd + } to move all duplicates to the top
Select the top shape layer and move the shape layer frame into a new position
Pre-compose the top 3 layers
Press the y key to select the Pan Benind or Anchor Point tool and move the pre-comp's anchor point to the center of the top frame
Repeat step 11 through 15 until you have arranged your montage (it might be a good idea to have a template set up as a guide layer so you know where to put the frames
Select all pre-comps and press Alt/Option + P to set a position keyframe for each pre-comp
With all of the keyframe selected move them down the timeline about 3 seconds
Now, with the CTI at the first frame drag each pre-comp into a starting position for that frame
Preview and adjust the timing, then turn on motion blur
Your images will now assemble themselves into the final montage.
There is no script that I know of that will do all of this automatically, but it would not be too hard to write a script that would do the pre-composing if you have a ton of these to do. I'm guessing that with a little practice you could have a new picture frame created and moved into position in less than a minute. It takes me about 30 seconds. That means a 20 frame sequence should take you about a half hour. It might not be worth writing a script unless you have a ton of these to do. Select the bottom three layers and duplicate (Ctrl/Cmnt + D), group them at the top (Shift + Ctrl/Cmnd + } ), move the top frame layer into position, then Shift + Ctrl/Cmnd + C to pre-compose, then move the anchor point of the pre-comp, then do it again.... When you're done set a few keyframes.
As I said, you could write a script, but you'd need a different script to move each frame into position and the script would only work for one layout. If you made a template to put on the bottom so you knew where do place the frames and which order you wanted them you could do this by hand very quickly. The sample project that I'm including which was just quickly thrown together took me less than 10 minutes. Replace my photo with one of yours and you'll get the idea.
Dropbox - photoMontage1_CS6.aep (Note: Dropbox will probably add a .txt extension to the .aep file. Just delete it and you should be able to open the project. -
Add new photo to existing calendar folder in iPhoto
I am making a calendar in iPhoto, picking photos from a folder, let's call it "2011 Pics," in iPhoto. After arranging all the photos and captions I decided I wanted to insert a new photo -- one that was not in "2011 Pics." So I inserted it into the folder, but the picture does not show up on the scrolling menu of pictures at the left of the calendar-making page. This happened last year and in frustration I started all over again. But surely there is a way to add a new picture to a calendar that is already laid out.Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think? -
hi,
New to this, so go easy on me. I recently got my first iDevice - an iPhone 5. I've used it for a month now and I have to say I love it.
But, I gave it to my kid this morning to look at. It was locked, so I assumed it was safe. WRONG. 5 mins later, I returned to him and my lovely iPhone5 was at the setup /pick your language screen! Looks like he entered the password incorrectly too many times and wiped it.
Now - I thought it would be fairly easy to recover the data and the apps - but it turns out this is not the case. I was never prompted to install iTunes and sync the device - not in the manual, not on the device when setting it up - so how was I to know that that would be my backup. I checked iCloud at a suggestion of an IT pal - nothing there, despite knowing that I had a Photo stream enabled. I may have disabled it only recently, but not sure if I can manually turn it on again?
Anyway - is there a way to manually scan my device and grab my all important photos and videos?
Cheers for any suggestions!Hi Michela27,
Thanks for visiting Apple Support Communities.
If you have content on your iPhone that isn't on your computer, the best thing is to use the advice in this article to transfer it to your new computer before setting up sync:
iTunes: Transferring media from your iPhone, iPad, iPod touch, or iPod
http://support.apple.com/kb/HT1209
Cheers,
Jeremy -
i recently plugged my iphone4 into my laptop to sync, when i plugged it in, itunes told me that i needed to update my software, so i clicked up date and walked awayfrom my computer leaving it to do the rest, but by the time i came back to my laptop 2-3 hours later i had realized that it has run out of charge and because of it my phone had gone into retoration mode- and the only way to fix it was to press restore. what do i do? do i click restore or will that take my phone back to factory settings as i have a tonne of photos and videos etc that i have not backed up yet?
what should i do anny coments or ideas please let me know!The first step in the upgrade process is a backup.
Did iTunes not create a new backup when you first connected it?
You really should be syncing your device and copying pictures off of it on a regular basis.
Starting an upgrade without first syncing and copying the pictures off is not a bright idea.
At this point, you only option is to restore.
Also, in the future, ensure your laptop is plugged into external power before starting upgrades. -
Adding link to the photo and Name in the outlook contact card -Enterprise wide
How can I make the name and photo in the outlook contact card link to my profile page? I read articles where it is mentoined that the URL is set in Registry, currently my organization does not have any link associated with photo and name in contact card.
I want to implement this across the organization , any deployment or changes that I need to do to implement this across?
Appreciate if you can provide details on how this is done. The url will look like this:
https://www.produrl.com/userid={userid}
How can I dynamically add respective userid in the link?Appreciate your response on this.So you want to redesign the contact card in Outlook? Are you using SharePoint? If signed into sharepoint via the social connect, there is a link to the mysharepoint page under View source. I don't think you can change the link or customize the card,
beyond what is listed here:
http://technet.microsoft.com/en-us/library/ff631135(v=office.15).aspx#BKMK_ContactCards
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter -
I was editing photos and it was getting stuck or frozen and working very slowly. I attempted to restart the computer but it would not allow me to quit aperture. Now aperture appears in my toolbar but will not open up so I can work on any photos. Any ideas?
Did you try opening from the Applications folder?
Depending on how far that gets you, I would also take a look at the Troubleshooting Basics. -
Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?
Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201 -
I recently updated to the new Photos and when I went to import my library into Photos, it wouldn't let me. Kept throwing errors. I followed the suggested fixes using the terminal regarding permissions, but that didn't work. I decided to just go back to using iPhoto, but when I opened that it wouldn't see my library either. I tried copying it to an external hard drive and opening that, but it didn't work. I can browse for it and see it on my computer but it's grayed out and I'm unable to select it. Please help. I'm terrified I lost all those photos.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
I have a iPhone 5. In usage, it says i have 2.1 gigs used because of photos and camera. I have deleted all my photos via iPhoto and now reset the phone back to factory settings in order to try to solve this problem, to no avail. Both iTunes and the phone say that 2.1 gigs are being used, even though the phone now has nothing on it. What is going on?
Yeah it works fine over wifi the problem is when I try to use it over my 3G. It's really stressing me out now.
-
I have a macbook operating OSX10.6.7. Recently backing up my ipad which had lots of photos from a recent vacation. I use this laptop as the backup server for all of my gadgets so it has thousands of photos and tons of music. It just told me that it couldn't back up the ipad bc there wasn't enough disc space. I was afraid that this would happen eventually. What next? Newer laptop with more space? I'm not sure what files I could sacrifice to free up more space as most of these are important.
What size hard drive do you have in your MacBook? The cheapest options are, a larger internal hard drive, or an external drive. Or you could get a cheap desktop PC and network to it for storage. I've got one that lives in the hall with 3 Terabytes (That's 3000gb) of storage.
-
Old Hard Drive Fried! How To Add Photos and Music from iPod to iTunes
Hello! I'm in serious need of some help.
My old hard drive died without any warning, so I lost everything that was on it. Luckily, my iPod is full of very important photos and all of my music.
How do I transfer these images and mp3s into iTunes on my new computer?
I've lost everything else, so the last thing I want to do is lose the only photos I have left along with the gigs and gigs of music I spent months gathering and organizing.
Please let me know the surest way to transfer these images and music files from my iPod into iTunes.
Thank you so much for your help! This event has saddened and exhausted me completely.
All the best,
Sunshine
Toshiba Satellite Windows XPIf you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers has been introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows. The procedure is a bit involved but if you're interested it's posted in this thread: MacMuse - iPod to iTunes
If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. This is just a selection, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. Have a look at the web pages and documentation, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
YamiPod Mac and Windows Versions
iGadget Windows Only
iPod Access Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions
PodPlayer Windows Only
CopyPod Windows Only
If your iPod is set to update automatically take care when connecting back to your computer and an empty iTunes. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Don't uncheck Sync Music it will be unchecked by default when you choose the manual setting: Managing content manually on iPod
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again. I would also advise that you get yourself an external hard drive and back your stuff up in case you have problems again. External drives are comparatively inexpensive these days and you can get loads of storage for a reasonable outlay.
For some additional ways to retrieve photos from an iPod try:
iPodPhotoCopy Windows only
CopyPodPhoto Windows only
iPod Photo Liberator Mac & Windows
Use Disk Mode to copy photos from iPod -
I would like to set up my email on the apple tv as well as have my husband's email on there so we can view both sets of photos and videos - it is already set up in his name - how do i add my name so as to view my photo library and songs from MY phone ?
this is not a reply - i asked the question - still trying to learn how all this works - someone please HELP ME
-
When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.
Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I was quite angered last night when I posted the first time, so lets try this again:
Here is my setup: I have adobe Revel on my Mac and iOS devices and it has worked quite well to be honest until I recently realized my photos and videos are basically trapped within the software. There is no way (that I am aware) to export all photos/videos or any kind of tool to pull the raw data out of the app and put it into say iPhoto or Lightroom.
Since I am not a fan of this sort of lock-in, (something I despise and encourage companies never to do), I am sadly going to cancel my Revel account once I get this sorted and store my photos elsewhere. This is a huge missed opportunity for Adobe, as the money is not an issue - its simply that the quality of service I need just doesn't seem to be there for this product.
So here is what I am trying to achieve: I simply want every one of my photos and videos to store on my hard drive like the old days. I don't care about folders or hirarcy or any kind of organization - I can do that with the metadata later. I simply want all of my things.
My hang up is in that I have already tried methods like "Show package contents" in the photos/adobe revel route and that works to an extent, but is incredibly cumbersome as I have to sift through all of the many folders. If that were the worst of it, I might be ok. But what is truly alarming and making this difficult is that I don't know where on earth the videos in Revel are actually stored. They show up in the application and I could export them one by one but I literally have hundreds. I can't find the actual files on my Mac anywhere.
Is there anyone at all who can help with this? The goal is to make this transition fairly easy and I feel that Adobe has very intentionally made it very difficult to consider leaving. I spend >$50/month on Adobe services and I am a little in shock this application seems so poorly designed for anything other than just dropping your photos into it. Please, please help if you can. I would be so grateful as Adobe customer service doesn't seem to know or care much about supporting this product.Hi KDT
Yeah. I agree, if you are used to a situation where "it's on the cloud AND synced down to your hard disk where you can get it" Revel is not exactly that. There were legacy decisions behind that - most not as sinister as you might think but I won't bore you with those details. AND yes you are correct. We currently don't have any way for you to wholesale download everything at once. So you aren't missing anything. Until we provide that mechanism I can provide some guidance.
I'm going to assume you have the current version of Revel on your Mac which is 2.0.
The easiest thing for you to do will be to export your files manually. You can actually select a range of files and export. So it's not a one by one thing.
You'll have to decide how best to perform the selection based on your photography habits. If you tend to take batches of files surrounding specific dates. You could do it by date. In the date view (In the applications upper right "Showing: Dates"). If you look at the end of a date row you'll see a small grid. If you click that grid you are taking into a grid view of just that date. If you select all and file>export you'll export the contents of that date.
The other option is remaining in Grid view (In the applications upper right "Showing:Grid") and perform a shift+selection where you select your first file, move down the desired range and while holding shift you select a second file (standard multi-select stuff).
One thing to keep in mind as you do this. You'll notice when you export you can export original or 'current version'. Export original does just that. Exports unedited original versions of your images as they were uploaded to us. When you export the current version of an image we'll export a rendition of the edited image. This "current version" image is not the original and in most cases will be a rendition that is not the same size as the original. So keep that in mind as you proceed.
Not ideal, I fully realize, but I do hope it gets you closer to having your images back on your hard disk as you desire.
As for your subscription. Assure you have checked your iOS Appstore subscription settings and set Revel to not auto-renew. Unfortunately for a pro-rated refund on the subscription balance you no longer desire you'll need to work with Apple as they hold the purse strings for Appstore purchases. Refunds haven't been a problem in the past so you should have no issue.
Hope this helps.
Jason
Maybe you are looking for
-
I am experiencing an issue where the longer I work in FCPX my RAM is consumed until it shows as a hair-thin slice inside of Activity Monitor, and the performance reflects what I'm seeing in Activity Monitor. If I close FCPX all my RAM returns and I
-
Hi Experts, I created a paragraph format by creating stye in smartforms. i made TAB settings in that Para. format. Inside the smartforms i used that paragraph format. But it will not take effects... Pls tell me the procedure to do the above tab sett
-
Apps crash when printing to a shared printer over wireless
Hello to all, I have a strange printing problem that I cannot figure out. At home I have an iMac wired to a DSL/wireless router, plus two PowerBooks that connect wirelessly to the network. All computers run 10.4.6. Everything has been working very we
-
First page on website is blank
I have successfully started a personal domain withiWeb. My address however shows something like this www.mywebsite/www.mywebsite/firstpage name.html when I go to MOBILE ME , and look under iWeb, the first page is labeled blank On the iWeb editing p
-
Where to locate an airport extreme installation CD/software?
I have purchased an airport extreme last December and didn't get a chance to install it until now. However, I could not find my installation CD. I am wondering where I can get/download the CD or the software? Thanks.