Photos are covering text

First timer here,
I created a page and it looked great, but my photo was covering the links at the top. So I went back in and moved it down just a little and all of a sudden the text that had been on the photo was gone. I found it underneath, but I can't figure out how to make it show up again on top of the photo.
Sorry if this is a dumb question, but what am I doing wrong?
Thanks

Welcome rydo,
You should also be able to right-click on the object and select the layer placement from the contextual menu that appears.

Similar Messages

  • What do I do about Photos covering text on my iBook download

    Yesterday I downloaded a 450 page reference book with photo illustrations.  It took several hours.  I am disappointed to find photos covering text! What do I do?

    Are there any reviews for the book in the ibookstore with similar comments about its layout ?
    If not then have you tried closing the iBooks app via the iPad's multitasking bar and re-opening the app and the book and seeing it it then shows correctly ? Double-click the home button to open the taskbar, and then swipe or drag the iBooks app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
    If it shows the same issue then try deleting the book from the app via the Edit button at the top right of the bookshelf and then redownload it via the Purchased tab in the ibookstore in the app.
    If it redownloads with the same problem then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    Or you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Why can I not open up photos that are being text to me?

    Why can I not open up photos that are being text to me?

    Hey Uptogetdown,
    Check out the following article:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    It is for troubleshooting issues with the Messages application on iOS devices, so I'd go through the steps listed and see if that resolves the issue.
    All the best,
    David

  • Updated to iOS 5 and now photos sent with text message show as sent, but are not received to an iPhone that has not been updated.

    Updated  to iOS 5 and tried sending a message with a phot to an iPhone that has not been updated. My message shows as sent, but neither the text or photo are received. Text alone works fine.

    This is being caused by using the same Apple ID for iMessage.  To fix this you have two choices:
    On all but one of the phones go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID.  Note: you can still share the same ID for purchasing in Settings>iTunes & App Stores; or
    On all of the phones go to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at".

  • I have lost my photo albums on my iPad Although the photos are still there. How do I get the albums back?, I have lost my photo albums on my iPad Although the photos are still there. How do I get the albums back?

    I have lost my photo albums on my iPad Although the photos are still there. How do I get the albums back?, I have lost my photo albums on my iPad Although the photos are still there. How do I get the albums back?

    It's version iPhoto '11. I sent the photos to the trash from in the resident iPhoto application, but not to the iPhoto trash, but the OS's trash in the bottom right task bar (Finder Trash).
    Realizing what I had done, I dragged the picture folder back into the "Pictures" folder under my name in the Finder. I also dragged the iPhoto Library file back, but it said a new one had been created... I still attempted to replace the new with old iPhoto Library file.
    The pictures are back and i can see the album names under events. The problem is that the album covers, nor the pictures themselves show up as thumbnails like they did before... they only show when you individually click on the photo to bring it into full view. I only see a grey background where the thumbnail was.
    Any assistance you can provide would be greatly appreciated!
    Thanks,
    Evan

  • How do I copy photos from a text message to my "Photos" location on my iPhone 5s?

    My friends send me photos via text messaging and I try to copy them to my "photos" location on my iPhone 5s. So far, I've only been able to create a folder for the photos but have had no luck in copying photos from iPhone text messages to iPhone "Photos" location. My computer OS is Windows XP Pro 64 bit, the most unsupported OS on the planet....even by Microsoft.

    Your are welcome. Glad you got that sorted out. If you want to know about the new features in iOS 7, you can download the user manual here,http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf, you can open it in your iBooks as well.

  • Why are some text pages converted to png's?

    I'm sure this has been covered to death but why does this happen? Here are two pages:
    this one converted to png:
    http://web.mac.com/neoverse/iWeb/Josh_Mobley/Blog/78282A4A-E25D-4F67-94C7-1F20F3 3D6FB3.html
    and this one which is not:
    http://web.mac.com/neoverse/iWeb/Josh_Mobley/About%20Me.html
    now, at first I thought it was having a link in the text but I have other pages with links that don't convert to png.
    Thanks in advance for any advice.

    In iWeb are both text boxes "Arial?" Did you copy any text from anywhere or did you type it all in?
    One thing to try, create a text box, type "text" then publish to see if it comes up text. If it does, then try to determine the differences. In the case where you copied the text in, there may not be a clear difference but retyping seems to have solved the problem for other users.

  • Book module LR 5.7 adding photos and putting text in spine

    I'm creating a book in the book module of Lightroom. I imported photos from a collection and used auto layout. I wish to add two more photos. I've added them to the collection, but I can't add them to the book I'm creating. i haven't yet clicked on create saved book.
    Another problem I'm having is adding text to the spine of a hardcover dust jacket. I did it once and deleted it. Now it won't allow to type in any text. I've repeatedly clicked on the spine and a yellow box comes up, but I can't type in it.

    Many thanks for this, but the photos are not on the film strip. They are in the collection, and they weren’t there when I went to book module and used auto layout for the collection. What I need to know is how to get additional photos into the book I’m creating which weren’t in the original collection.  As to the spine, I’ve tried dragging the mouse to highlight text, but it is isn’t there. When I go to the 1:1 view I can see the spine very large on the screen and there is nothing on the spine.

  • Imbedded Images(photos) are not displayed in emails (yahoo7mail), its ok using IE9

    When opening emails, only the text is displayed any photos are not shown. Was ok with FF3 and works ok with IE9.
    Using Yahoo7mail.

    Hi  ,
    In fact, we upload pictures to Active Directory using the
    Import-RecipientDataProperty cmdlet. By default, thumbnailPhoto is included in the OAB as an Indicator attribute. This means the value of the attribute isn't copied to the OAB— instead, it simply
    indicates the client should get the value from Active Directory. If an Outlook client (including Outlook Anywhere clients connected to Exchange using HTTPS) can access Active Directory, the thumbnail will be downloaded and displayed. When offline, no thumbnail
    downloads.
    And please check the if lync client chosen Default corporate picture .
    The following articles for your reference.
    Lync 2010, Exchange 2010, SharePoint 2010, and Office 2010 Integration: Part 1
    http://blogs.technet.com/b/drrez/archive/2011/04/26/lync-2010-exchange-2010-sharepoint-2010-and-office-2010-integration-part-1.aspx
    GAL Photos in Exchange 2010 and Outlook 2010:
    http://blogs.technet.com/b/exchange/archive/2010/03/10/gal-photos-in-exchange-2010-and-outlook-2010.aspx
    Wendy Liu
    TechNet Community Support

  • I burned my first iDVD andpicture quality is not good.  Originals are excellent.  My photos are shot in raw or jpeg, both are not sharp when I view my DVD.  I viewed it on my 1080 dpi tv and my new apple computer.

    I burned my first iDVD andpicture quality is not good.  Originals are excellent.  My photos are shot in raw or jpeg, both are not sharp when I view my DVD.  I viewed it on my 1080 dpi tv and my new apple computer.

    There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
    If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
    Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
    http://www.lqgraphics.com/software/phototomovie.php
    (Other users here use the alternative FotoMagico:  http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
    Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
    Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie  as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast,  for burning.
    You will be pleasantly surprised at how professional the results can be!
    To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
    http://support.apple.com/kb/HT1089

  • Photos are blurry

    When I add a picture to the browser of Final Cut it looks crystal clear in the viewer, but when I add the photo to the timeline it looks really blury in the canvas, and when I burn to a DVD it still looks blury. How come it doesn't look like whats in the viewer. I have posted this question a couple of times, but I have not recieved any answers that work. If any one can help I would really appreciate it. Thanks ZKP

    The answer is long. Take a look at page 337 in the manual. Still images are covered over about 4 to 5 pages or so. Here's where to start:
    If a Still Image Appears Fuzzy on Export
    Standard definition video is almost always interlaced, so still images created from
    standard definition video are interlaced, too. A single frame of interlaced video
    consists of two fields that were originally captured at different moments in time. If
    there is a lot of motion in the video content of a frame (such as a ball quickly moving
    past the camera), the two fields contain very different visual information. When the
    entire frame is displayed, objects in motion have a comblike appearance because the
    object appears in two places at once.
    During normal video playback, interlacing is usually not very noticeable because the
    fields are scanned so quickly. However, on still images, interlacing artifacts cause
    some still images to flicker or strobe on an interlaced display (such as an NTSC or PAL
    monitor). To eliminate interlacing artifacts, you can apply a deinterlacing filter in
    Final Cut Pro before you export a still image. (A deinterlacing filter simply removes
    half the lines and interpolates the missing lines by using the remaining lines.) You can
    also export the image without applying the filter, and then apply a deinterlacing filter
    in a separate graphics application.
    Important: Final Cut Pro often displays the Viewer and Canvas deinterlaced to make
    the image clearer while you are editing. To make sure you catch any potential
    interlacing artifacts in still images, always watch your video on a monitor that
    matches your final screening format. For example, if you plan to output your movie to
    an NTSC video format, you should monitor your sequence on an external NTSC
    monitor. For more information about external monitoring, see Volume I, Chapter 16,
    “External Video Monitoring.”
    17 Powerbook and 2.7 Dual G5   Mac OS X (10.4.3)  

  • Photos are printing completely black?!

    I have an HP D110 printer and an iPad running iOS 4.3.1. When using AirPrint to print photos, the photos are printing completely black. I restored the factory settings on the printer. Emails are printing fine using AirPrint. So far neither HP or Best Buy has been of any assistance. Please let me know if anyone has experienced this.

    Does AirPrint allow you to manipulate printer settings on the iPad? Are emails in black and white only? Have you tried printing an email with something colored in it like text, or an avatar, or something? If emails aren't printing color, or can only be printed in black in white, the printer isn't getting the message to use color and is just blasting out the black ink. Somewhere there has to be a step you are missing (obviously) that should fix this. Dumb question, but you do have colored ink in the printer, right?

  • Photos are printing elongated

    I have a deskjet 3054. I am trying to print photos from my computer. The photos are coming out elongated. Documents are printing OK. How can I fix this?

    Does AirPrint allow you to manipulate printer settings on the iPad? Are emails in black and white only? Have you tried printing an email with something colored in it like text, or an avatar, or something? If emails aren't printing color, or can only be printed in black in white, the printer isn't getting the message to use color and is just blasting out the black ink. Somewhere there has to be a step you are missing (obviously) that should fix this. Dumb question, but you do have colored ink in the printer, right?

  • After receiving a photo in a text message, my I phone 3gs screen is fuzzy over 3/4 of the screen. I have tried restoring, restarting my phone but this screen fuzz remains. Anyone know how to clear the fuzz off an Iphone screen? Thanks for help.

    After receiving a photo in a text message, my I Phone 3GS screen is now fuzzy over 3/4 of the screen. I deleted the photos, did a restore of the phone, did a restart of the phone and still the screen has the fuzz over 3/4 of it.
    Anyone ever experienced this problem and know how to fix it?
    Thank you for your help.
    James

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • I have 3.2 edition that I never registered and my photos are now locked in the program how do I now

    I have photo
    shop album starter 3.2 that I never registered...the registratio
    n time is now expired and my photos are locked into the program...how do I get them out or del
    ete the program with out losing my pictures?

    This thread covers that question: http://forums.adobe.com/message/2430425#2430425
    -Mark

Maybe you are looking for