Photos are grainy when moved from Lighroom to Photoshop

Why is this happening?
I'm updated in Lightroom and Photoshop cc
how do i correct the problem?

I don't know Macs so can't give you advice if CS6 will run on your Mac.
But since you have Lr5 you won't need to open Raw images in Photoshop. Lr5 gives you all the Raw editing capabilities that you need. I don't think CS6 will add anything to Raw editing capabilities that Lr5 doesn't have - although I don't know CS6 since I am still working with CS5.
You still can send images from Lr5 to CS4 for editing but you have to select <Render using Lightroom> in the dialog that says that the "Camera raw plug-in 8.1 may be required   ...". BTW: what this means is that the Camera raw plug-in 8.1 is required for Photoshop, not for Lr.
When you select <Render using Lightroom> Lr will create a TIFF / PSD from the Raw image and send it to CS4 for editing.
If you had CS6 Lr would send the Raw image to CS6 but on saving the edits in CS6 a TIFF / PSD would be created.
The only drawback with using CS4 is that the options <Merge to Panorama ...>, <Merge to HDR ...>, and <Open as layers> will be greyed-out and are not available.
If instead of selecting  <Render using Lightroom> in the dialog box you would select <Open anyway>, nothing would happen. CS4 would open but the image would not be displayed in CS4.

Similar Messages

  • Black and White Gray Scale Photos Are Dark When Exported from Indesign to PDF

    When I print right from InDesign the black and white photos look great.  However, if I print the exported pdf file, the black and white photos are much darker.  Is there something I should be doing upon export so that they will look as they do in InDesign?
    Thanks,

    I have tried different settings in format and color space all with the same results. I'm sure it has to do with system not being calibrated. I'm not to computer literate so not sure how all this works. The other programs must go along with my computer and moniter settings where LR and Elements produce their own rendering independent of settings. Yes, I checked and Elements renders like LR. I found some other forums that discussed similar problems but with color rendering. HMMM, just tried something. In Picassa I switched to Linear Gamma 2.2 in display mode and the LR edited photos look correct. So it must be something along those lines being the problem.

  • Photos are grey when moved to my computer

    Hello -
    I'm attempting to move 5 images from my device to my computer and after moving them they are grey when I open them on my computer.
    Any ideas?

    Hey Jetsetter311,
    Welcome to the BlackBerry® Support Community Forums.
    The files may be encrypted, do the files have a .rem extension added to the original file name? Have a look at the follow article:
    Encrypted files stored on the microSD media card appear as .rem files
    http://btsc.webapps.blackberry.com/btsc/KB11454
    Thanks.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Outline of objects in photos are grainy when viewed at 16.67% but not at 25%.  Messes up editing

    Hello,
    I have recently been having this problem where the outlines of objects in photos is grainy at certain magnifications.  It only started recently and I haven't made any setting changes in Photoshop nor have I changed my monitor or video card settings.  My last photos were shot with an ISO of 400.  I always shoot in Raw and the photos aren't grainy in the Raw viewer.  The graininess isn't only visible at 16.67% but also at 33.33%.  But everything is fine at 25% and everything higher than 33.33%.  The problem is just that 16.67% is the best size to use while editing the picture.  The picture on the left is the same file just viewed at 16.67% while the right is viewed at 25%.
    Any help would be very appreciated.
    Kegren

    What version of Photoshop?
    If CS4 or CS5, do you have the OpenGL Drawing setting enabled (Edit - Preferences - Performance)?
    -Noel

  • Can't open RAW file when moved from Lightroom to Photoshop CS4

    I have a Canon 6D and recently purchased Lightroom 4.4 so that I could open my Canon RAW files. They do open in Lightroom, but when I move them to PHotoshop CS4 I can't open the files. I get a message telling me I can't open them. Any suggestions?

    I don't know Macs so can't give you advice if CS6 will run on your Mac.
    But since you have Lr5 you won't need to open Raw images in Photoshop. Lr5 gives you all the Raw editing capabilities that you need. I don't think CS6 will add anything to Raw editing capabilities that Lr5 doesn't have - although I don't know CS6 since I am still working with CS5.
    You still can send images from Lr5 to CS4 for editing but you have to select <Render using Lightroom> in the dialog that says that the "Camera raw plug-in 8.1 may be required   ...". BTW: what this means is that the Camera raw plug-in 8.1 is required for Photoshop, not for Lr.
    When you select <Render using Lightroom> Lr will create a TIFF / PSD from the Raw image and send it to CS4 for editing.
    If you had CS6 Lr would send the Raw image to CS6 but on saving the edits in CS6 a TIFF / PSD would be created.
    The only drawback with using CS4 is that the options <Merge to Panorama ...>, <Merge to HDR ...>, and <Open as layers> will be greyed-out and are not available.
    If instead of selecting  <Render using Lightroom> in the dialog box you would select <Open anyway>, nothing would happen. CS4 would open but the image would not be displayed in CS4.

  • Photos are dark when exported from LR

    I don't know if this has come up before, didn't find it in search. When I work up a photo in LR I get it where I want. I then export to another folder. When I view that photo in any other program it is very dark, though importing and viewing in LR it looks fine. When loaded to a site like Flickr it is also dark. I don't have a calibrated moniter but think the rendering should be the same or close between all programs on the same setup. Is there an adjustment in the LR program for rendering?

    I have tried different settings in format and color space all with the same results. I'm sure it has to do with system not being calibrated. I'm not to computer literate so not sure how all this works. The other programs must go along with my computer and moniter settings where LR and Elements produce their own rendering independent of settings. Yes, I checked and Elements renders like LR. I found some other forums that discussed similar problems but with color rendering. HMMM, just tried something. In Picassa I switched to Linear Gamma 2.2 in display mode and the LR edited photos look correct. So it must be something along those lines being the problem.

  • I have an iPad 2 and receive e-mail through internet connection. When I delete e-mails, and clear my Trash folder, they re-appear. Setting are for remove from server when moved from Inbox. Any idea what I can do to actually delete them?

    I have an iPad 2 and receive e-mail through regular internet connection. Lately, when I delete e-mails, and clear my Trash folder, they re-appear, downloaded anew from the server and marked as unread. My e-mail Advanced Settings are selected for "Remove from server when moved from Inbox." Even when I access the e-mail accountfrom my desktop and delete the e-mails, the re-appear on my iPad. Does anyone have any idea what is causing this and what I can do to actually delete them?

    Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
    When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
    Exchange 2003 server into the domain/forest. 
    You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
    So it sounds like you are not looking in the right location within ADSIEdit. 
    You may find the following article also helpful for this issue which is the same resolution:
    http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
    I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
    http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

  • Do photos get resized when sending from PSE 6 to PE 4?

    Do photos get resized when moving them from PSE 6 to PE4?
    I've come to understand that using overly large photos in slide shows in PE 4 can cause lots of issues, and its recommended to resize photos to 1000x750 (http://www.adobeforums.com/webx/.3bb8822c) before including them in a slide show in PE4. I'm trying to understand the implications of working with photos in PSE 6 and then moving to PE 4 vs. just doing it directly in PE 4.
    I can imagine (at least) two scenarios:
    1. I have all my photos in PE6 and want to work ONLY in PE4. I'm guessing i would resize my photos in the PSE 6 Organizer by using File-->Export and picking a smaller file size (e.g., 1024 x 768) and then import them into PE4 and build my slide show there.
    2. I have all my photos in PSE 6 and want to to create a slide show there and then move it to PE 4 to touch it up or do some fancy stuff to it. Will the photos be resized so PE 4 won't have trouble with them or do i need to resize them in PSE 6, reimport them into PSE 6, build the slide show, and THEN send it to PE 4?

    eric,
    See my post over at http://www.adobeforums.com/webx/.59b85fd0/4
    for reasons why I think that for your current objectives, working in Premiere Elements (rather than making a slide show in PSE) will be a better choice.
    >1. I have all my photos in PE6 and want to work ONLY in PE4. I'm guessing i would resize my photos in the PSE 6 Organizer by using File-->Export and picking a smaller file size (e.g., 1024 x 768) and then import them into PE4 and build my slide show there.
    Yes.
    A couple of considerations
    1- Where will you establish the sequence of the photos in the slide show?
    Are you making an Album in PSE 6 in order to establish the sequence of the slides as you are selecting which photos to use? if YES, we can experiment with sending the photo files in their Album sequence to Premiere Elements.
    Or will you establish the sequence of the photos within Premiere Elements?
    2- When working in Premiere Elements will you be able to do the 600 slides in a single PE project?
    I don't know the answer to this: it will be influenced by your system configuration.

  • When moving from a list of threads view to a thread would be nice to jump to last thread read.

    When moving from a list of threads being viewed to a thread, it would be nice to jump to last thread read or first unread thread.
    Sometimes the threads get rather long.  Sometimes I haven't read a thread in awhile & I forget where I have left off reading a thread. It would be nice to have an icon to click on to move to your last read post or the first non-read post. 
    Seems this could be implemented in javascript without too much problem.  Might be a problem of when to get rid of the tracking data.
    Robert

    This would be a new capability.   I didn't know you could jump directly to the last post in a thread by clicking on the posters name in your discussions.  However, I am interested in jumping to the first post that I haven't read.
    Since writing my original post, I realize that software doesn't know what posts I have read. Lets say there are are 26 posts in a thread.  Lets assume these are divided into three pages with at most 10 items in a page:
    page 1 -- a, b, c, d, e, f, g, h, i, j
    page 2 -- k, l, m, n, o, p, q, r, s, t
    page 3 -- u, v, w, x, y, z
    The software know that I have viewed the first three pages.  It doesn't know what post on the pages I have read.  The software would need to assume I have read all the available posts on a page.
    Now lets assume that 12 more post were added.  This results in:
    page 1 -- a, b, c, d, e, f, g, h, i, j
    page 2 -- k, l, m, n, o, p, q, r, s, t
    page 3 -- u, v, w, x, y, z, aa,bb,cc,dd
    page 4 -- ee,ff,gg,hh,ii,jj,kk,ll
    It would be nice if I could go to aa. 
    Jumping to the last post in the thread doesn't hack it. You have to spend a lot of time finding where you left off your reading.
    Intesting, the list of your posts on your homepage usings the term Last Activity were as Your Discussions uses the term Last Post. The terminalogy should be the same & should act the same.  For the existing capability of going the the last post, I was thinking of Goto Last Post.

  • Performance issue when moving from 4.6c to 6.0

    Looks like we took a performance hit when moving from 4.6c to 6.0 on the same hardware. 
    For example, our PGI on outbound deliveries now takes several seconds longer in 6.0 then it did in 4.6c.  We've noticed other SAP area's are taking longer as well.  With an ST05 sql trace on the PGI in 6.0, we see more tables being accessed, same tables being access differently taking longer.  All leading to more time to do a PGI in 6.0.
    Has anyone else noticed this increase in Response time when upgrading to 6.0 ?   
    Thanks,
    David

    Hello.
    Yes, in our system we noticed the same thing at start. The general performance seemed to get worse after upgrading. In fact, database became bigger and more memory is consumed. However, it was tuned up by our system administrator and now seems ok.
    Run the optimizer statistics and see if it get's better.
    Regards.
    Valter Oliveira.

  • Iphone5 - lost my contacts when moving from BT Yahoo to BT Mail. I do not back up to iCloud and I did not use my mail account for contacts.  Can anyone help to find and restore my contacts?

    IPhone5. I have lost my contacts when moving from BT Yahoo to BT Mail. I do not backup to iCloud and do not use my mail account to store contacts.  Can anyone help find the contacts on my phone and restore them?

    Contacts are designed to be synced to a supported application on the computer or a cloud service like Gmail, iCloud, or an Exchange server.
    Have you failed to use the device as designed?

  • My photos are distorted when playing the video.

    My photos are distorted when playing the video. How do I keep them clear?

    FrauSherrie
    Very good idea starting your own new thread based on your specific issues and details of them. Although the subject matter may sound the same, it often gets confusing trying to exchange information with two different users at the same time in the same thread and trying to follow the discussion as the thread content gets entangled.
    I just got finishing responding to your post of this thread's question's in rsayen06's thread where you initially posted.
    http://forums.adobe.com/thread/1252104?tstart=0
    For you convenience this is a copy of what I just wrote there:
    FrauSherrie
    SG asked rsayen06 several important questions to get at the core of that user's Premiere Elements issues. So far I do not see any answers to the questions. An the answers will be in those details. Although you have offered your project settings and saying that you have the same problem, they are but a small part of the troubleshooting equation.
    1. What version of Premiere Elements are you using and on what computer operating system is it running?
    2. You say you are putting pictures and music on the Timeline? How many pictures and what are their pixel dimensions? What type of music, what compression and file extension? What is the total duration of the Timeline content?
    3. When you playback the Timeline content in the Edit Mode Monitor are you looking at the rendered or unrender Timeline?
    4. When you say that you see distortion in the pictures...how are they distorted...
    a. from the point of view of pixel aspect ratio, flicker, lines, other?
    b. What do your computer resources look like in the way of installed and available RAM and free hard drive space? Are you getting any error messages associated with any of the project difficulties that you are encountering?
    c. When you get to the burn dialog, what does the Quality Area show for Space Required and Bitrate?
    We will be watching for your follow up.
    Thanks.
    ATR

  • From what I understand RAW photos are supposed to open in raw in photoshop CC.  I don't understand why my RAW photos don't open in RAW in photoshop CC or Lightroom 5

    From what I understand RAW photos are supposed to open in raw in photoshop CC. I don't understand why my RAW photos don't open in RAW in photoshop CC or Lightroom 5

    Has the behavior changed compared to how it used to open ? If so, do you refer to the Camera RAW window similar to this: http://screenshots.en.sftcdn.net/en/scrn/78000/78026/adobe-camera-raw-22.jpg
    What is the file extension of your photos ?
    In Lightroom, there is no special way of opening a RAW file vs. JPEG. They all open the same. What is the Lightroom behavior ? Can you post a screenshot ?

  • What should I do to setup a new MacBook pro for first time when moving from a PC?

    What should I do to setup a new MacBook pro for first time when moving from a PC?

    you have to use the migration assistant if you want your files transfered from your pc to mac this link will be helpful
    http://support.apple.com/kb/HT4796

  • Many of my recently uploaded photos are horizontal when they should be vertical, and vice versa.  I've corrected all these on my laptop but in my iPad and i Phone photo streams they are still mixed.  How can I fix this?  Thanks.

    Many of my recently uploaded photos are horizontal when they should be vertical, and vice versa.  I've corrected all these on my laptop but in my iPad and i Phone photo streams they are still mixed.  How can I fix this?  Thanks.

    Add the corrected ones to your PS - PS contains only what was added to it - changes made are not applied to the PS - you have to re add the updated photos
    LN

Maybe you are looking for