Photos are in the wrong library

I had opened a backup of LR, forgot, then proceeded to download over a month's worth of pictures to this backup.
How do I move these photos to my "real" version of LR?

Export as catalog (from the "wrong" catalogue), then Import from Catalog (into the "right" one).
Hal

Similar Messages

  • How do I get photos from the iPhoto import folder to the iPhoto library?  It uploaded, but hung while deleting from my camera, so no imported photos are in the iPhoto library.

    How do I get photos from the iPhoto import folder to the iPhoto library?  It uploaded, but hung while deleting from my camera, so no imported photos are in the iPhoto library.  I watched it upload about 400 photos, one by one.  They're somewhere, but they don't appear in the iPhoto library. As iPhoto was deleting them from my camera, it got hung up, then a message came "you should eject before disconnecting a device."  I hadn't touched the camera.  The message came by itself.  I couldn't get iPhoto to respond, so I disconnected the camera and did a Force Quit.  Opening it back up, the pictures were gone.  Can somebody help me? 

    What version of iPhoto are you running?  Assuming it's iPhoto 9 or later Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • I Start a New am so frustrated with problems syncing photos on my iPad. I choose which files to sync but get deleted photos in my albums, my photos are in the wrong albums and the weirdest of all- I now have strange graphics and Facebook photos in albums!

    I have spent several hours trying to find a solution to the following problems. After syncing my IPad with ITunes, I end up with photos that I previously deleted in my albums, duplicate photos, albums that have wrong pictures in them and weirdest of all, strange graphics and Facebook photos that are not even mine. Right now I hate this thing!
    I have scanned the support forums, Googled it, deleted several photo caches, spent days editing my photo files, checked the specific folders I wanted to sync and it seems like it's not syncing, just adding the same photos and strange crap that it already had on it. Oh please help me!
    Thanks!

    OK....I'm stumped.  The message you are seeing is typically there to protect someone from syncing with a different computer/iTunes account.  Is there any way anyone else has used your iPad and possibly connected it to their computer?

  • My photos are in the wrong albums and some photos are missing all together. How can I make them go back to their correct albums?

    iTunes is placing my photos in the wrong albums and some photos are missing all together. How can I make them go to their correct albums?

    Nevermind. I just renamed the folder on my mac and synced it again and everything is now in its proper place.

  • How can I know which photos are in the library was used in each album I have created before.

    How can I know which photos are in the library was used in each album I have created before?
    I have many photos in the library folder of iPhoto, but actually I don't know which photos were used in my album.
    Is there any method to find this?
    Thanks.

    Album or Book?
    If Album you can find the ones not already used:
    File -> New Smart Album
    Album -> is not -> Any
    Regards
    TD

  • Thumbnails are often the wrong orientation and distorted. What is causing this?

    Thumbnails are often the wrong orientation and distorted. When I select in viewer they are normal again.

    As if only the corrected layer would have remained on the photos.
    So the geometry of the pictures is correct - they are not skewed or something? Only the colors and intensities are wrong?
    . Only in printing when it is converted to PDF file some photos are unrecognizable.
    Is it the printed pdf or the pdf viewed on the screen? If it is the printed copy you need to fix your print settings.
    Does Aperture give a warning, that the high resolution images are not available?
    We had some cases of books not being able to be printed, and that was due to a broken reference to the original files. Only the book could not access the originals, all other parts of Aperture could. To check for this, try to add one more adjustment to one of the images in question. Is it possible? Are the edits reflected correctly in the pdf of the book?
    We were shooting with 3 cameras, Lumix5 shooting RAW, Cannon 100 shooting JPEG and SONY alfa850 shooting RAW.
    Have you tried to reprocess the raw of the edited images? (Photos > Reprocess Raw)
    Also try, to remove one of the images from the book and to add it again. That usually helps, if Aperture has lost the connection to the originals used in the book.
    If you no have done so already, repair (and if necessary rebuild) the Aperture library.
    See: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
    Regards
    Léonie

  • Why is it on the photo app is that when you add your photos to new albums and when you are deleting from camera roll it will delete photos from everywhere so therefore once your photos are in the albums you have chosen you cannot delete f

    Why is it on the photo app is that when you add your photos to new albums and when you are deleting from camera roll it will delete photos from everywhere so therefore once your photos are in the albums you have chosen you cannot delete from camera roll

    Your photos are actually all in the Camera Roll.  The album you create only contain pointers to these pictures.  Albums are like music playlists; when you delete a song from the playlist it doesn't delete the song from your music library.  But when you delete a song from your music library it will also be deleted from any playlists that it may have been in as well.

  • My music on my iphone 5 is messed up. The pictures for the song album are on the wrong songs like the cover for drop it like its hot is on the cover for dark horse! Please help

    My music on my iphone 5 is messed up. The pictures for the song album are on the wrong songs like the cover for drop it like its hot is on the cover for dark horse! Please help!!!

    Hello TheGyzmo,
    Thanks for using Apple Support Communities.
    It looks like your might have signed up for iTunes Match.
    Good to know
    When you enable iTunes Match on your iOS device, the music library on your iOS device will be deleted and replaced with your music in iCloud.
    Syncing music with iTunes will be disabled while iTunes Match is enabled on your iOS device.
    By default, when you add an iOS device to iTunes Match, the option to download over a cellular network isn't enabled1. To enable downloading over a cellular network for iTunes Match, choose Settings > iTunes & App Stores > Use Cellular Data > On.
    When you use iTunes Match on an iPhone, iPad, iPod touch, Mac, or PC, it will be associated with the Apple ID you use for iTunes Match. Learn more about subscribing to iTunes Match.
    iTunes Match on iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT5637
    What I suggest is that you move your music from your old laptop to your new one by following the steps below:
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    After that, you can then add iTunes match on your computer, or turn off iTunes Match on your iPhone, and then sync your iPhone as you would normally with your new computer.
    iTunes: How to add a computer or iOS device to iTunes Match
    http://support.apple.com/kb/ht4913
    Take care,
    Alex H.

  • I have had a reinstall nightmare getting my loops back they are in the apple library, I can access them through the media browser but I only have a few available through the loop browser, how do I get them all back there again? please help

    I have had a reinstall nightmare getting my loops back they are in the apple library, I can access them through the media browser but I only have a few available through the loop browser, how do I get them all back there again? please help

    "Where do I find my hundreds of dollars of downloads I have done since 2005?"
    They will only be where you put them  If you are doing the very basics, then they will be on your computer and they will be in your backup copy of your computer.
    The itunes store is not global at all, never has been. You cannot redownload your content from another country.  You can only use the countrys itunes store for the country that you are physically located.

  • Credit master records are showing the wrong credit exposure?

    Hi,
    Some credit master records are showing the wrong credit exposure and therefore orders are being credit blocked when they should have been approved.
    The problems occur after the credit limit has changed in the credit master record
    Please Help.
    Regards,
    Chamandeep

    Dear Chamandeep,
    Trust you have reviewed the open documents that would constitute to credit exposure, and have turned a blank.
    In such cases, it is possible to reorganise the credit master data of customers by using the programmes RVKRED77 and RVKRED07.
    Kindly prefer the latter as it permits greater flexibility especially in selection of dates of data reorganisation.
    In either case, the data  re-organisation is resource intensive and is best run when all other users are cleared from the system.
    Regards,
    K Gopidas

  • I tried to export photos from iMac to iPad using a USB flash drive.  The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power.  Any ideas of what type of USB flash drive I should use?

    I tried to export photos from iMac to iPad using a USB flash drive.  The photos are on the drive but when I plug it into the iPad, the iPad says the device requires too much power.  Any ideas of what type of USB flash drive I should use?

    You can transfer photos outside of iTunes. I do it all the time. THat said, i have a 50/50 success rate with them. I'd avoid sandisk and kingston, their bundled software triggers the 'too much power' warning.
    I've had mixed luck with lexar, some work, some don't.
    I did have good luck with an older 4 gig geek squad one.
    Look for drives without software on them, without bright LED lights and I haven't gotten any larger than 4 gig to work, but that may just be me.
    For a less troublesome way? h onestly, I use a SD card that I've formatted with the DCIM folder. I've never had one of them trigger the 'too much power' warning. Just make sure they're not SDXC. those don't work.

  • How do i get my ringtones back on my phone, they are in the itunes library but they wont sync to the phone

    how do i get my ringtones back on my iphone, they are in the itunes library but not on the ph

    Is it selected in iTunes? Is the ringtones longer than 35 secs?

  • Arguments are of the wrong type, are out of acceptable range, or are in conflict with one another.

    Hello, I am filtering by date
    DATEADD(d,DATEDIFF(d,0,GETDATE()),0), but
    doing like below gives me an error
    ADODB.Command error '800a0bb9'
    Arguments are of the wrong type, are out of acceptable range,
    or are in
    conflict with one another.
    /aa.asp, line 19
    line 19 is
    Recordset1_cmd.Parameters.Append
    Recordset1_cmd.CreateParameter("param1",
    135, 1, -1, Recordset1__MMColParam) ' adDBTimeStamp
    any one have any idea as to why
    grateful for any help
    thanks
    k
    <%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>
    <!--#include file="Connections/connpeepeek.asp" -->
    <%
    Dim Recordset1__MMColParam
    Recordset1__MMColParam =
    "DATEADD(dd,DATEDIFF(d,0,GETDATE()),0)"
    If (Request("MM_EmptyValue") <> "") Then
    Recordset1__MMColParam = Request("MM_EmptyValue")
    End If
    %>
    <%
    Dim Recordset1
    Dim Recordset1_cmd
    Dim Recordset1_numRows
    Set Recordset1_cmd = Server.CreateObject ("ADODB.Command")
    Recordset1_cmd.ActiveConnection = MM_connpeepeek_STRING
    Recordset1_cmd.CommandText = "SELECT usr_image1,
    dateimage_usr FROM
    diddle.ps_usr_image WHERE dateimage_usr = ?"
    Recordset1_cmd.Prepared = true
    Recordset1_cmd.Parameters.Append
    Recordset1_cmd.CreateParameter("param1",
    135, 1, -1, Recordset1__MMColParam) ' adDBTimeStamp
    Set Recordset1 = Recordset1_cmd.Execute
    Recordset1_numRows = 0
    %>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
    Transitional//EN"
    http://www.w3.org/TR/html4/loose.dtd">
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html;
    charset=utf-8">
    <title>Untitled Document</title>
    </head>
    <body>
    </body>
    </html>
    <%
    Recordset1.Close()
    Set Recordset1 = Nothing
    %>

    Ben,
    If dbo.TG_Account is a table in your FDM database, then you should be able to populate the recordset with:
    strSQLAcct = "SELECT Account FROM dbo.TG_Account"
    Set rsAcct = DW.DataAccess.farsFireHose(strSQLAcct, False)

  • I've been using a flip video camera since 2009 and all of my videos are in the flipshare library.  What is the best way to burn all these videos to a DVD that will play on my DVD player/tv?

    I've been using a flip video camera since 2009 and all of my videos are in the flipshare library.  What is the best way to burn all these videos to a DVD that will play on my DVD player/tv?  The flipshare library is taking up too much space on my Macbook and I wanted to delete these videos once they were all tranferred to DVDs.
    Any help is greatly appreciated.

    Purplehiddledog wrote:
    I do backup with iCloud.  I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud. 
    I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
    I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever.  Is that right?
    In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
    If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

  • I have just put an audio book into my iTunes music library.  When I tried to transfer it to my iPod shuffle it rearranged the tracks so that they are in the wrong order.  How can I put them in the order they appear in the book?

    I have just put an audio book into my iTunes music library.  When I tried to transfer it to my iPod Shuffle it put the chapters in the wrong order i.e. Chap 1, Chap 10, Chap 11 etc. rather than Chap 1, Chap 2, Chap 3 ...  How can I get it to put them in the order they appear in the book?

    First, we need to know if the audiobook chapters are being treated by iTunes as music files or as audiobooks. If they are not audiobooks purchased from the iTunes store, they might be getting "shuffled". You will need to look at "File" - "Properties" (I think - I don't use iTunes under Windows - or right-click on the file and choose "properties") and look at the media type. If it is "Music", change it to "Audiobook". If this is not the problem, or does not fix anything, please post back.
    Actually, looking at your post again, a second thought occurs to me - assuming there are less than 100 chapters in the book, just renaming them with a leading zero on the first nine chapters might do it. A computer will alphabetically sort filenames in the order you quote (1, 10, 11, 12, 13, ... 2, 21, etc.) but a leading zero will fix that (01, 02, 03 ... 10, 11, 12)

Maybe you are looking for

  • When i sync my iPhone it says that there is 2.0 gb of photos on it...when there clearly ISNT!! how do i free up this space to use?

    When i plug my phone into sync it it is reading in the lower bar that i have 2.0GB of photos on my phone and when i go under the usage on my phone it is saying the same thing...but under the app there are no photos what so ever!! how do i free up thi

  • Controlling area already used for org. unit problem

    Hi people, can you please help me with one problem, my customer is upgrading SAP HR from 4.6 to 6.0 and now we are testing QAS system. When I create new or. unit in PPOME, I have Cost-centre inherited from the org.unit above, but when I want to put a

  • Multicam Angle Editor not vertically layering clips

    I created a new multicam clip which consisted of 4 video clips and a master audio clip.  I used the defaults when creating the clip (including the "use audio when synchronizing" checkbox).  When I view this in the multicam angle editor however, it sh

  • Dual layer DVD will not play after iDVD burning

    Hi All, I am having some trouble making a useable DVD. I have a video that I recorded and imported into iMovie (2h33m long). I exported it to iDVD, which told me that I needed to use a dual layer DVD to make it fit. Here's where I noticed the first p

  • TNS listener running?

    How can I tell if the TNS listener is running? I'm getting the following errors when trying DBI/DBD: DBI->connect failed: ORA-12224: TNS:no listener (DBD ERROR: OCIServerAttach) at hellodbhandle.pl line 4 DBI->connect failed: ORA-12224: TNS:no listen