Photos does not recognize my camera when I try to import

When I try to import I keep getting an "error -9937". Tried using image capture as a possible solution but it also doesn't recognize my camera. Went back to iPhoto and now it no longer recognizes my camera. It worked perfectly fine until this recent update. Any ideas? I don't want to use the Cloud.

I have seen quite a few similar questions, but none was solved:
com.apple.imagecapturecore error 9937
AFTER UPDATING UPDATE OS X 10.10.3 IMAC NO LONGER RECOGNIZES JPG AND CANNOT DOWNLOAD FROM CAMERA
And all were for Canon cameras.  Is your camera also a Canon Powershot?  If that is the case contact Canon for help.
As a work-around:  Try to read the photos from a card reader and not directly from the camera.  It is less bother and you avoid problems, if the batteries in the camera are low.

Similar Messages

  • Can't connect my ipod touch to my Wifi.  It does not recognize my password when i try to join my network and I know my password is correct

    I just received an ipod touch 4 generation and very annoyed and have been trying to days to connect it to my wifi at home.  I know my passpord is correct but it does not recognize it and does not let me join my network.
    help.

    Does it say password is incorrect?
    - Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • HT204302 my itunes does not recognize my iphone when plugged into computer it recognizes my iphone as still camera

    Help
    Itunes does not recognize my iphone when plugged into computer it recognizes it as a still camera. I have installed the lastest version of itunes and gone through the troubleshooting tips and still have the same problems.

    Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.

  • When I choose external editor in iPhoto on my iMac it does not recognize Aperture. When I do the same on my laptop it works? Any ideas?

    When I choose external editor in iPhoto on my iMac it does not recognize Aperture. When I do the same on my laptop it works? Any ideas?

    No idea, but Aperture is not an external editor. Like iPhoto, Aperture is a Photo Manager. It's a database. There is no way to round trip a shot from iPhoto to Aperture and back again like you can with Photshop or an image editor.
    Given that Aperture does pretty much everything that iPhoto does - and a whole lot more -  it begs the question: why not just use it to manage your photos?

  • Why does the organizer no longer recognize my camera when I try to download?

    Why does Photoshop Elements Organizer no longer recognize my camera when I try to download?  Is there a new way to downolad?

    Detective" for $30.  Is this something worth investing in or should we be
    able to solve this ourselves?   My brain hurts.
    No it is not worth investing in this because it is a very expensive way of getting viruses. These detectives and those who say they can find the fault on your machine by installing their software are bunch of hackers.
    If your camera is not recognized then it suggests that either your USB is faulty or the cable linking the two is faulty.
    Can you connect anything else like a flash drive to your USB port that you are using for your camera and is it recognized?

  • Still having problems - FC does not recognize HD camera!

    Camera: Sony HVRA1U. Final cut does not recognize it.
    Audio/Video Settings are:
    Sequence Preset: HDV1080i60
    Capture Preset: HDV
    Device Control Preset: Sony HDV (I think)
    Camera menu settings:
    VCR HDV/DV: HDV
    iLink Con: Off
    Nothing. Just does not recognize the camera. Now, it does on iMovie. So what's the deal? I've restarted all systems, unplugged every cable, etc. Done everything possible.
    To top it off, it HAS recognized it before. Now it's just stopped.
    Also, I'm not exactly computer savvy so I'll need a step by step approach on how I could possibly solve this. Thanks.

    Welcome to the Apple Discussions. First delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder and try again.
    A workaround would be to use Image Capture to upload from the camera to a folder on the desktop and then import into iPhoto. Or you may have to use a card reader, drag the image files from it to a folder on the desktop and then import (a preferred workflow IMO).
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Mac pro does not recognize ipad device when connected via usb port, suggestions?

    mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions?  itunes 10.7

    Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
    The most likely issue:  Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

  • TS3716 My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music.  I didn't have problems loading music originally, but this is a new occurrence.  Could you help?

    My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music.  I didn't have problems loading music originally, but this is a new occurrence.  Could you help?

    Hey, Thanks a lot.  It took quite a bit of time to resurrect this ipod.  I tried the upgrade again, but still would not recognize my ipod. So I went to the next step and reset my ipod, wiping of all of the information like it was new.  This helped my laptop see the ipod on itunes, but did not sync. So, I deleted the itunes off my computer completely, restarted and then reinstalled the newest itunes, and then restarted.  Finally, it recognized my ipod and started to download each song.  It took awhile as there was 602 songs, but finally it works.  Yea!!!  I never had any problem with my old nano, but this touch has been another animal for sure. Thank you again and also the community for information.  This was a helpful forum and will recommend to others if they get stuck with their ipod or iphone.  Take care, Karen

  • I took video using my Iphone 4S and uploaded it into my Macbookpro iphoto.  When I open imovie it does not recognize the video when I import it manually it is distorted.

    I took video using my Iphone 4S and uploaded it into my Macbookpro iphoto.  When I open imovie it does not recognize the video when I import it manually it is distorted.

    Did you ever get an answer to this? I just experienced the distortion when I imported a video from my iPhone 4 to iPhoto.

  • Iphoto 8.03 and it does not recognize the camera

    Just downloaded IPHOTO 8.03, It does not recognize the camera
    Not able to download new photos

    What camera is it? Have you set it to PTP or Mass Storage? Did you check the cable, camera battery, try a different USB port? Have you tried using a Card Reader?
    Regards
    TD

  • HT4623 my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ... i have updated all software on the pc and disabled Norton as the

    my ipad 2 is "stuck" with a connect to itunes on the screen ... and itunes says it could not restore the os ... so now itunes does not recognize the ipad when connected to the pc ...i have updates all the software on the pc and disabled Norton as the troubleshoot instructions suggested; however itunes still does not recognize the ipad .... help!

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
     Cheers, Tom

  • HT1414 I "Erased all content and settings" and now my itunes does not recognize my iphoe when i plug it in. Plus my iphone is stuck with the apple symbol on it and wont do anything. what did i do?

    I "Erased all content and settings" and now my iTunes does not recognize my iPhone when I plug it in. Plus my iPhone is stuck with the apple symbol on it and wont do anything. what did I do? How do I get my phone to work again?    

    Reset, hold both Home and Power buttons until the iPhone begins to restart. Usually takes about 10 seconds time. If still problem. Open iTunes on computer. Connect iPhone to computer with USB Cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the Firmware.

  • I just purchased a new Linksys E2500 router.  It will connect to all my other devices, but does not recognize the password when sent from the PowerBook G4.

    I just purchased a new Linksys E2500 router.  It will connect to all my other devices, but does not recognize the password when sent from the PowerBook G4.  When I try it responds that the password is invalid.  I have connected my MacBook Pro, iPad and iPod Touch with the same password. 

    Charles Swigart wrote:
    It will connect to all my other devices, but does not recognize the password when sent from the PowerBook G4.
    Try putting $ (a dollar sign) in front of the password.

  • I have downloaded latest itunes but my ipad does not show in devices when I try to sync.  Any suggestions?

    I have just gotten my new ipad!!!  I downloaded latest version of itunes but my ipad does not show in devices when I try to sync music.  Any suggestions??

    Does a little box come up seeing the iPad as a camera? That doesn't impact iTunes as much as it confirms that your computer sees the device. If your computer doesn't see it then iTunes doesn't know it's there.
    If you're plugged into a hub or extender, try plugging it directly into the box or main part of your computer.
    If you're using an extension, stop and just use the included sync cable.
    Try using a different USB port.
    After you installed iTunes, did you restart your computer?
    Usually what's needed is the 'apple device driver' which installs automatically, you just need to sometimes trigger the install, using different ports helps with that.
    If the simple trouble shooting doesn't help then you can search on the Apple Device Driver and there's more detailed trouble shooting on the site.

  • Itunes is not working on my mac. I'm trying to redeem a gift card and everytime I enter my password it does not work.  Also, when I try and browse songs, everything is blank

    HELP!
    Itunes is not working on my mac. I'm trying to redeem a gift card and everytime I enter my password it does not work.  Also, when I try and browse songs, everything is blank

    It's been a while but it should work on a Mac because Macs can read Windows formatted devices. Otherwise, you can perform a restore operation to return it to the Mac format. If you go to support.apple.com/manuals/ you can find a copy of the user manual for the model you have in which this is all explained.

Maybe you are looking for