Photos don't display on book pages after upgrading to 9.4.2

I have several books I created in version 9.4.1. After upgrading to iPhoto 9.4.2, most of the pictures will not display on the book pages. Only 1 photo displays out of 3 or 4 photos on the page. Is there a setting that has changed? Using Mountain Lion 10.8.2 on MacBookPro10,1

Did you duplicate the existing book or create a new empty book and add the same photos?
Have you tried rebuilding your library as follows: make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and  apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
Fix #2
Using iPhoto Library Manager  to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next  window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

Similar Messages

  • Aperture 3: Photos don't display in browser or Viewer

    Some of my photos don't display in the browser or Viewer panels. It's displayed as greyed out. I am running Aperture 3.2.2. I have tired to rebuild permissions and the database without luck. Updating the preview doesn't work either. For some of the photos, if I double click, the photo appears in the Viewer panel but when I double click it goes back to the greyed out view.

    Some of my photos don't display in the browser or Viewer panels. It's displayed as greyed out. I am running Aperture 3.2.2. I have tired to rebuild permissions and the database without luck. Updating the preview doesn't work either. For some of the photos, if I double click, the photo appears in the Viewer panel but when I double click it goes back to the greyed out view.

  • LASERJET 1160 PRINTER RUNS A BLANK PAGE BETWEEN EVERY PRINTED PAGE AFTER UPGRADING TO WINDOWS 8.1

    Laserjet 1160 printer runs a blank page between every printed page after upgrading to Windows 8.1

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Can't open Pages after upgrading to snow leopard on 10.6.8

    Can't open Pages after upgrading to snow leopard on 10.6.8

    Has Spotlight finished its indexing?  Check in the upper right.  If you get just the search field, it has, if it says its indexing, you have to wait before you can use anything.

  • I try to purchase pages (after upgrading to maverick) and get this message: Failed to verify the preflight file. It is not signed by Apple.

    I try to purchase Pages (after upgrading to Maverick OS) and keep getting this message:
    Failed to verify the preflight file. It is not signed by Apple.
    How to I get past this?  I cannot find anything referencing preflight file.  Who can identify this?

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ Certificates
    There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to  CRL. Log out, log back in, and test.

  • Unable to  get the login page after upgrade from 11.5.10.2 to R12

    Hi ,
    We are unable to get the login page after upgrade from 11.5.10.2 to R12, all the services are up and running.
    Pls let me know if someone has come across this issue.
    Thanks&Regards,
    Apps DBA

    Hi ,
    After compile JSP files manually , now we are facing problem after logging.
    Error : You have encountered an unexpected error.
    Thanks&Regards,
    Apps DBA

  • G4 AGP Graphics - 2nd display won't work after upgrading from os 10.2

    I have a desktop G4 AGP Graphics with two displays. When I was running os 9-10.2, the second display worked fine, but after upgrading the os (now running 10.4), the second display still works, but has turned gray and pixelated.
    When I take a screen shot, the picture shows that both displays appear clear (and in color).
    Am I missing something? Thanks in advance for any suggestions

    so do you have 2 different video cards driving two different monitors? or is it One video card with 2 displays?
    the info you listed isnt very detailed but it does tell me you got an ATI video card with 16MB VRAM.
    I assume that thats the Stock AGP 2x graphics card that came the The PowerMac G4 AGP graphics model.
    why is your display set to 8bit depth? a stock 2x AGP card with 16MB VRAM should be able to support 16bit or 24bit depth even at 1024 x 768 res.
    the info says also Core image not support as well as Quartz Extreme no supported. Which is significant because it could be why the 2nd Monitor doesnt display properly with Tiger.
    under 10.2 there were less stringent requirements for driving video.
    OSX 10.4 Tiger is much more advanced OS and has higher graphics cards requirements now.
    I could be wrong, but I think you may need a newer video card that supports Quartz Extreme and Core image.
    hopefully someone else will run by this topic and offer some insight aside from my own.

  • Photo library does not sync in iOS4 after upgrade in 3GS

    Hi all,
    Photo library does not sync in iOS4 after upgrade in 3GS.
    Anyone having such problems?

    Just did. Uncheck sync photo check box and sync. Then check sync photo check box and sync. Solved.

  • Why don't we have hotspot option after upgrading to iOS 8.1?

    why don't we have hotspot option after upgrading to ios 8.1 ?

    Did you already update the carrier settings? The hotspot feature is provided by the carrier. Follow the steps in this article:
    iOS: Updating your carrier settings

  • HT4623 Can not get pass Term and Conditions page after upgrade?

    Can not get pass the Terms and Conditions page after upgrade?

    Restart your phone and if that doesn't help, reboot the device.
    Restart the iPhone by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPhone by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the phone start up.

  • 1.1 - vista - photos don't display

    I upgraded to V1.1 on my Dell Inspiron 9400 and the photos no longer display. I read a couple of other posts that suggested remomving/changing/upgrading video drivers. I've done this, plus removal and reinstall of Lightroom, plus brand new catalogs and new test imports of raw (D70s NEF) and jpg, and nothing works.
    I get grey boxes instead of the images, all the other metadata and image info, but no image. I don't know what to do now. V 1.0 worked fine, and V1.1 works fine on my desktop PC (not a Dell, custom built, runs Win XP).
    Any ideas? Will Adobe come up with a patch or something? I am confident my driver is correct for my system, I allowed Vista to find the new latest version and install it, and I also tried an older driver version.
    This is the one and only program I absolutely need to run on this laptop for an upcoming trip of a lifetime and I don't want to go back to Win XP on the laptop. I'd prefer not to go back to 1.0 either as I was keen on the new features.
    If anyone knows a fix, please help.

    Hi Daniel, here's my results... I have directx 10
    System Information
    Time of this report: 7/25/2007, 19:06:07
    Machine name: LAPTOP
    Operating System: Windows Vista Home Premium (6.0, Build 6000) (6000.vista_rtm.061101-2205)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Inc.
    System Model: MP061
    BIOS: Phoenix ROM BIOS PLUS Version 1.10 A08
    Processor: Genuine Intel(R) CPU T2300 @ 1.66GHz (2 CPUs), ~1.7GHz
    Memory: 1014MB RAM
    Page File: 682MB used, 1600MB available
    Windows Dir: C:\Windows
    DirectX Version: DirectX 10
    DX Setup Parameters: Not found
    DxDiag Version: 6.00.6000.16386 32bit Unicode
    DxDiag Notes
    Display Tab 1: No problems found.
    Sound Tab 1: No problems found.
    Input Tab: No problems found.
    DirectX Debug Levels
    Direct3D: 0/4 (retail)
    DirectDraw: 0/4 (retail)
    DirectInput: 0/5 (retail)
    DirectMusic: 0/5 (retail)
    DirectPlay: 0/9 (retail)
    DirectSound: 0/5 (retail)
    DirectShow: 0/6 (retail)
    Display Devices
    Card name: Mobile Intel(R) 945GM Express Chipset Family
    Manufacturer: Intel Corporation
    Chip type: Intel(R) GMA 950
    DAC type: Internal
    Device Key: Enum\PCI\VEN_8086&DEV_27A2&SUBSYS_01CD1028&REV_03
    Display Memory: 224 MB
    Dedicated Memory: 0 MB
    Shared Memory: 224 MB
    Current Mode: 1920 x 1200 (32 bit) (60Hz)
    Monitor: Generic PnP Monitor
    Driver Name: igdumd32.dll
    Driver Version: 7.14.0010.1147 (English)
    DDI Version: 9Ex
    Driver Attributes: Final Retail
    Driver Date/Size: 12/12/2006 10:50:10, 2105344 bytes
    WHQL Logo'd: Yes
    WHQL Date Stamp:
    Device Identifier: {D7B78E66-64E2-11CF-E377-C721A2C2CA35}
    Vendor ID: 0x8086
    Device ID: 0x27A2
    SubSys ID: 0x01CD1028
    Revision ID: 0x0003
    Revision ID: 0x0003
    Video Accel: ModeMPEG2_A ModeMPEG2_C
    Deinterlace Caps: {AEDC1D5D-8546-440E-AAB2-B69FA725AF82}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_FieldAdaptive
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
    {AEDC1D5D-8546-440E-AAB2-B69FA725AF82}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_FieldAdaptive
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
    {AEDC1D5D-8546-440E-AAB2-B69FA725AF82}: Format(In/Out)=(YV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_FieldAdaptive
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
    {AEDC1D5D-8546-440E-AAB2-B69FA725AF82}: Format(In/Out)=(NV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_FieldAdaptive
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
    {AEDC1D5D-8546-440E-AAB2-B69FA725AF82}: Format(In/Out)=(IMC1,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_FieldAdaptive
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC1,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
    {AEDC1D5D-8546-440E-AAB2-B69FA725AF82}: Format(In/Out)=(IMC2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_FieldAdaptive
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
    {AEDC1D5D-8546-440E-AAB2-B69FA725AF82}: Format(In/Out)=(IMC3,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_FieldAdaptive
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC3,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
    {AEDC1D5D-8546-440E-AAB2-B69FA725AF82}: Format(In/Out)=(IMC4,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_FieldAdaptive
    {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
    {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC4,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_BOBVerticalStretch
    {AEDC1D5D-8546-440E-AAB2-B69FA725AF82}: Format(In/Out)=(S340,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend Deinterlac

  • Photos Don't Display

    I'm having an issue with iPhoto that has started this last week. I was hoping it would go away after a couple days, because it's acted flaky before but then somehow fixed itself. But this time, it didn't, and it is sort of a big deal. That is, my photos don't show up in iPhoto anymore when I try to view them.
    It appears they are in there, and indexed, and the thumbnails show up. But when I go to view them, they are totally blank. Every one of them. But they seem to have retained tags of where the faces are.
    For a photo viewing app, it would be useful if I could view a photo. Any idea how to fix this problem, or have I lost my photos for good now?

    Try the following:
    1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
    2 - Run Option #4, Rebuild Database.
    3 - If necessary repeat with Option #1, Repair Permissions.
    OT

  • Problem with Aperture slideshow export - Some photos don't display!

    I have just completed my latest wedding slideshow. It plays as normal in Aperture, but when exported, certain photos don't show... just a black screen. The timings are unaffected.  Aperture 3.6, Yosemite 10.10.1
    The affected photos seem to be the ones that I am displaying for longer durations. I'm using Ken Burn's theme and if I turn off the Ken Burn's effect on the affected photo it gets exported ok. 
    Having spent many hours working on this slideshow I'm "slightly" annoyed!  This is obviously a bug introduced in Aperture 3.6 or Quicktime on Yosemite, I just hope it can be fixed ASAP.   Unfortunately, I guess Aperture is low on the priority list... I have moved the LR, but still rely on Aperture for slideshows!
    HELP!

    Luckily I still had a bootable pre-Yosemite backup of my iMac and have been able to successfully export the slideshow.  Hopefully, Apple will fix the problem before next wedding season!

  • High Resolution Photos Don't Display

    Hello,
    We have a fully patched Lync 2013 installation with a fully patched Exchange 2013 installation. We've moved all users to the Unified Contact Store, and have had all users upload high-res photos. I can test this via the URL like this:
    https://server/ews/Exchange.asmx/s/GetUserPhoto?email=[email protected]&size=HR648x648
    I can definitely see high-res photos. Unfortunately, Lync doesn't display them! We get the old, low res AD photos that are horrible. I have read through everything I can find to ensure high-res photos are enabled in Lync, but they just don't display.
    Any ideas on how to fix / troubleshoot this?
    Thanks!
    Nolan

    Hi, depends what constitutes everything you could find =)
    Can you confirm that the 'DisplayPhoto' attribute of your associated client policy is set to allow ALL photo's, and not just those from AD.
    Use the below from Lync Management shell to query the attribute status against your client policies.
    Get-CsClientPolicy | Select Identity, DisplayPhoto
    Kind regards
    Ben
    Blog:www.gecko-studio.co.uk/ 
    Twitter:
      LinkedIn:
      Facebook:
    Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you've asked, please mark the thread as answered to aid others when they're looking for solutions to similar problems
    or queries.

  • Check your book carefully after upgrading!

    I have a book that I started in iPhoto '09 and now upgraded to iPhoto '11 and I had to go through it page by page after I noticed a few things were changed...
    - in a few spots, photo were swapped. I noticed this because captions underneath a few photos didn't match the photo anymore
    - fonts in a few spots went back to the default, rather than the custom font I picked.
    The font thing is a much larger issue though. iPhoto doesn't seem to handle fonts the same way anymore. Instead of using a set font for different elements which can be changed in a dialog box (like a style sheet), you can now change the font settings on a per-element basis. Now this opens up more options for customization, which is good, but also makes it a major pain if you want different fonts and to have it all match throughout the book - it actually makes more work.

    this is strictly a user to user forum and speculation about Apple decisions or release dates is expressly prohibited by the TOU
    We can only help you with how to use the program as it sits
    I wish I could go back to iPhoto 9!
    Easy - load your backup of the iPhoto '09 library and reinstall iPhoto '09 from the original disks - reinstall iPhoto - go to your receipts folder ("Your hard drive" ==> library ==> receipts) and remove any iPhoto receipts and reinstall from the restore disks that came with your computer - do a custom install of bundled software only
    For more information click here for the MacWorld article on reinstalling OS X applications.
    Do you have a question ?
    LN

Maybe you are looking for

  • Error while installing Oracle 10g on Solaris 9 x86

    Hi all, I got several error after install oracle 10g. After I run the root.sh. It prompt : Starting Oracle CSS service under init(1M) Expecting the CRS daemons to be up within 120 seconds. Giving up: Oracle CSS stack appears NOT to be running. and wh

  • BeatsAudio missing/re​placed after Installing Windows 8.1

    Hi, When I bought my laptop (HP Pavilion 15-p044tu) it had Windows 7 installed. Also, BeatsAudio controler installed.  Then I installed Windows 8.1 64bit (clean install, not upgrade from 7) and it required a full format of my HDD. So all the drives g

  • Default value in dropdown field for FPM form in HCM Processes and forms

    Hi Experts, I am developing HCM Processes and forms using FPM forms and I had a dropdown list contains ten values. So, every time while opening the form first time, my dropdown field should be defaulted with fifth value from the list. How can we achi

  • Making animated gifs in Photoshop Elements 11

    Is there a way to color and/or adjust the lighting on all of the frames/layers of a gif at one time? I've been trying to adjust the brightness of a twenty-layer gif, but it's a pain in the butt to have to go through each layer and try to match the sa

  • Call of Duty 4 Processor Requirements.

    I am Thinking about getting Call of Duty 4 for my Mac Mini. But the system requirements says I need to have a 2.0 ghz processor, but I have a 1.82 ghz processor. Could I still play the game or will that be a big factor?