Photos fail to print after editing with clone stamp tool and layers

After editing using the clone stamp tool and using layers the photos fail to print. I even tried a simple crop edit and the photo failed to print.
Photos print without editing.

Im working on a Mac OX 10.9.4 and Photoshop Elements 12 for Mac
I tried printing from Organizer and editor and I have the image saved on my desktop
I don't receive an error when I try to print. The message usually reads: Printing, 2% complete or 13% complete.
I have left it sit overnight but it never produced a photo.
The printer is new: HP Envy 5400 and I have no problem printing photos from I Photo.

Similar Messages

Clone Stamp Tool and Healing Brush not working - why?

As pointed out in the thread subject line, both the clone stamp tool and healing brush are not working for me in Photo Elements 7.
When I am attempting to use it, I get the message: "Could not use clone stamp tool because the area to clone has not been defined". Well, this is not the case since I did define it with command Alt + left mouse click.
Background:
Photo Elements 7 is installed in Windows XP Professional SP3. The latter runs as a virtual O/S with Sun VirtualBox on host SuSE Linux 11.1 (Gnome).
I have run out of ideas as to what the problem could be, so I am requesting assistance from the forum community. Thank you very kindly in advance for replies.

Do you mean photoshop elements 7 and not premiere elements?
The fix posted above only applies to linux os systems, which is
different from mac and windows.
On windows vista Alt+left click is to set the clone source.
Try the following steps one at a time.
1. reset the clone stamp tool by clicking triangle on the far left of the
tool options bar and select reset tool.
2. Go to Edit>Preset Manager and click Done in the dialog that appears.
3. Reset the elements 7 preferences by holding down the Shift+Alt+Ctrl keys
at the same time you start elements 7. In the dialog that appears, click yes.
Hope this helps.
MTSTUNER

Adobe photoshop elements 9 . i cannot get the circle to appear on clone stamp tool and spot healing

adobe photoshop elements 9 , i cannot get the circle to appear using clone stamp tool and the spot healing brush . i`ve tried restating my computer and unloading and loading the adobe disc . but still no good .

I had this same problem and was searching for answers. I also prefer using a circle instead of crosshairs. I hope you've figured it out by now, but, if you haven't, here is the answer (I am using Elements 9, but, it should work for other versions I think):
1. Open up Elements Editor, Click on Edit, Click on Preferences, Click on Display & Cursors.
2. Under Painting Cursors, select Full Size Brush Tip
3. (optional) - if you want crosshairs within your circle, then also select Show Crosshair in Brush Tip.
4. Click ok.
Now use the brush, and it should have a circle to use.
P.S. Sometimes if you have your Caps Lock key on, that removes the circle as well.

Healing brush/Clone stamp tool and others very slow processing

Healing brush/Clone stamp tool and others very slow processing. System resources monitor shows only 700MB (of 5GB allocated to Photoshop) RAM and 30% CPU is used to perform such tasks as healing brush. Process bar comes up and is painfully slow to complete the task. I don’t understand why does Photoshop not use all the resources available/allocated? No other programs are running at the time, I have tried all the suggestions on this forum and all over the Google. My brand new system is: Intel I7 4770K overclocked to 4.3GHz, 8GB 1600 RAM, Samsung PRO 120GB SSD system drive, 100GB scratch disk. The photos I usually work on don’t exceed 20MB in size. Any suggestion would be appreciated. Thanks

Thanks for the answer.
I have not mentioned the GPU because the processes I described (as far as I know) are not supposed to be using GPU resources. So far I have not been able to afford the GPU i want which is GTX770, so I use Intel 4600 built in graphics instead. To be honest I find, that 4600 graphics is quite powerful. I am able to play Mass Effect 3 on Full spec on max res without game slowing down. And Windows 7 64bit index score is 7.8 for the 4600 graphics. Overall index score is 7.8 on my PC righ now.
I'll try to get the Photoshop system info as soon as possible.
Thanks again.
Zee

When using the clone stamp tool and press the alt key layer just moves

when using the clone stamp tool and press the alt key to set a point it seem to create a new layer and just moves the layer arround. I can not get the clone to now work. what did I do?

Open the Clone Source panel. I think you'll find the Clipped option is disabled. If so, enable it.

After Effects problem with clone stamp tool

Hi,
I've been using clone stamp tool in Photoshop for years and has no problem with it. But somehow I could never get it work on After Effects. After alt+click to select source I can then click (and hold left mouse button), rub and change the target area as expected but as soon as I let go the mouse button the target area reverts back to original.
What did I do wrong?
thanks.

First question that I have for you is did you look in the help files?. Simply type clone stamp in the search After Effects Help field at the top right corner of the application frame it you will find all kinds of information. There are a few good tutorials linked directly from the help file. After Effects Help | Paint tools: Brush, Clone Stamp, and Eraser
Because After Effects works with video you have to make sure you have the correct options for your clone stamp or your paint tool selected and you are working in the correct window. It is not so much that the clone stamp is not working, it is just that you probably do not have it set up correctly.

Problem with Clone Stamp Tool Transparency

Hi there, I am working in CS5 and lately when I have been drawing with the Clone stamp tool, the cloned content seems to be transparent instead of being a 100% opaque clone of the source. The tool is in normal mode but the result looks almost identical multiply mode. I am coming from CS3 and I have not run into this problem in the past. Any pointers would be greatly appreciated.

…and the align sample to current layer is checked on.
This implies that you need to understand what the settings actually do. You have a choice "current layer", "current and below" or "all layers". These have nothing to with Align, they are all about which layers are sampled.
"Aligned" is about where multiple clicks of the Clone Stamp sample from. How they relate to the source area that you sampled.
Opportunity to air a major complaint of mine - "Aligned" automatically keeps checking itself. Because some Grandpa (photoshop 6 or 7 can't remember) decided that Option double click should be a 'shortcut' to keep Aligned checked all the time. Because they always work with Aligned on I guess, they think everyone should. Unfortunately it means that if you are a fast and experienced user, you have to waste a fair amount of time each day locating a tiny checkbox, to turn the damn thing off again. And again. And again.

Porblem with clone stamp tool

When I try to use the Clone Stamp Tool, I select the sample area by Alt/click but when I try to apply what is selected, all I get is a white spot. What am I doing wrong. This has worked before, I must have something set incorrectly but I can't figure out what.

On the clone tool's option bar, top left, there is a little triangle. Click on that and reset the tool.
Does that fix it?

Clone Stamp Tool and smudge tool issue

iMac 21.5";   new on 12/14/2011;   OS Version 10.7.3; 2.7GHz Intel Core i5; AMD Radeon HD 6770M 512 MB.
Two and Three Layer, all layers are copies of background layer, plus two adjustment layers, 8 Bit file:
Clone Stamping directly on image layer with Background layer directly below and with copy of Background layer directly below.
Intuos 4 tablet and pen.
Clone Stamp tool Setup:
Layer Adjustment parameter set to either This Layer and Below or All Layers.
All other parameters at default.
Using simple soft brush.
=====================================
The bug: Clone Stamp too will only affect the layer selected to do the actual cloning.
Tried it in every configuation possible without adjust the tool defaults, and no layers below will get the cloning corrections or stamping.

Welcome back gang.
Made a couple new discoveries while double checking.
Again, the same four layer setup: Background-Background copy-HSB Adj layer-Levels Adj layer.
The problem replicates with the Adj layers clipped or not.
The key is any tweak in the Adj layers will cause the issue.
Any Adj layer tweak seems to get exaggerated when smudging on a layer.
For example, increasing the gamma or center slider in the Levels box will cause all bright pixels to go white and darker pixels to go black.
I do not know the threshold luminance pixel value but I would guess it is at 128/128.
Modest tweaks to the Adj layer, for example raising the gamma slider to 1.20 will cause the smudge to posterize or turn white.
Tweaking the HSB Saturation slider to +12 will cause color posterization.
Counter to what I had stated upstream, any setting of the Smudge tool will cause this to happen.
Also, as said upstream, the performance goes down such that the spinning balls appear frequently.
In other words, it does not appear to be a 1-to-1 relationship of tweaks made in the Adj layer to the effect of the Smudge tool.
My guess is that the Sample All Layers option is multiplying the color and luminance values fo the layers together.
Plus, it was probably designed to do so but I do not think it was to be so pronounced.
Still amazes me that the situation never occurred or did I notice it until now, and the issue exists in CS5 too.
When did PS add the Sample All Layers option to the Smudge tool?
Anybody else?
================================
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Mac OS 10.7.3
System architecture: Intel CPU Family:6, Model:42, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2700 MHz
Built-in memory: 4096 MB
Free memory: 1738 MB
Memory available to Photoshop: 3384 MB
Memory used by Photoshop: 75 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Version: 2.1 ATI-7.18.11
OpenCL Version: 1.1 (Dec 4 2011 16:53:18)
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Radeon HD 6770M OpenGL Engine
Display: 1
Main Display
Display Depth:= 32
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Renderer ID: 16915206
Video Card Memory: 500 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: Macintosh HD:Applications:Adobe Photoshop CS6:
Photoshop scratch has async I/O enabled
Scratch volume(s):
Macintosh HD, 930.7G, 700.7G free
Required Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
Primary Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Plug-ins:
Additional Plug-ins folder: not set
Installed components:
   adbeape.framework   adbeape   3.3.8.19346   66.1025012
   AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
   adobe_caps.framework   adobe_caps   5.0.11.0   1.256674
   AdobeACE.framework   AdobeACE   2.19.18.19243   66.492997
   AdobeAGM.framework   AdobeAGM   4.26.17.19243   66.492997
   AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
   AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
   AdobeBIB.framework   AdobeBIB   1.2.02.19243   66.492997
   AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.492997
   AdobeCoolType.framework   AdobeCoolType   5.10.31.19243   66.492997
   AdobeCrashReporter.framework   AdobeCrashReporter   6.0.20120201
   AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
   AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
   AdobeLinguistic.framework      17206
   AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
   AdobeOwl.framework   AdobeOwl   4.0.93   66.496052
   AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
   AdobePDFSettings.framework   AdobePDFSettings   1.4
   AdobePIP.framework   AdobePIP   6.0.0.1642
   AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
   AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
   AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
   AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
   AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
   ahclient.framework   ahclient   1.7.0.56
   aif_core.framework   AdobeAIF   3.0.00   62.490293
   aif_ocl.framework   AdobeAIF   3.0.00   62.490293
   aif_ogl.framework   AdobeAIF   3.0.00   62.490293
   AlignmentLib.framework   xcode   1.0.0.1
   amtlib.framework   amtlib   6.0.0.75
   boost_date_time.framework   boost_date_time   6.0.0.0
   boost_signals.framework   boost_signals   6.0.0.0
   boost_system.framework   boost_system   6.0.0.0
   boost_threads.framework   boost_threads   6.0.0.0
   Cg.framework   NVIDIA Cg
   CIT.framework   CIT   2.0.5.19287   145486
   data_flow.framework   AdobeAIF   3.0.00   62.490293
   dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0
   dvacore.framework   dvacore   6.0.0.0
   dvamarshal.framework   dvamarshal   6.0.0.0
   dvamediatypes.framework   dvamediatypes   6.0.0.0
   dvaplayer.framework   dvaplayer   6.0.0.0
   dvatransport.framework   dvatransport   6.0.0.0
   dvaunittesting.framework   dvaunittesting   6.0.0.0
   dynamiclink.framework   dynamiclink   6.0.0.0
   FileInfo.framework   FileInfo   66.145433   66.145433
   filter_graph.framework   AdobeAIF   3.0.00   62.490293
   hydra_filters.framework   AdobeAIF   3.0.00   62.490293
   ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
   ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
   image_compiler.framework   AdobeAIF   3.0.00   62.490293
   image_flow.framework   AdobeAIF   3.0.00   62.490293
   image_runtime.framework   AdobeAIF   3.0.00   62.490293
   LogSession.framework   LogSession   2.1.2.1640
   mediacoreif.framework   mediacoreif   6.0.0.0
   PlugPlug.framework   PlugPlug   3.0.0.383
   UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
   wrservices.framework
Required plug-ins:
(removed)
Optional and third party plug-ins:
   Perfect Effects Free 3.0.2, Copyright © 2012 onOne Software. All rights reserved. - from the file “Perfect Effects Free.plugin”
   Perfect Effects Free Filter 3.0.2, Copyright © 2012 onOne Software. All rights reserved. - from the file “Perfect Effects Free.plugin”
   Perfect Effects Free Smart Filter 3.0.2, Copyright © 2012 onOne Software. All rights reserved. - from the file “Perfect Effects Free.plugin”
Plug-ins that failed to load: NONE
Flash:
   onOne
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

Clone stamp tool and image processing

Hello, I am not able for some reason to apply clone stamp tool to multiple pictures at a time using image processing, I just get the first picture saved with the effect and the rest as they were. Could someone help me out with this? I have around 200 pictures and I need to remove damage from all of them quickly. Or is it not possible? Thank you!

After that time ten years Adobe added a new feature that enable you to record tools use. However the feature was not well designed recorded various amount of data depending on machine. Has some restrictions also. The feature is not compatible with everything as I wrote Adobe Disable this feature when its Plug-in Scriptlistener is installed. I never found a good use for the feature. Note: my option is grayed out because I install Scriprlistener.

Clone stamp tool and keyframing

How do I animate with the clone stamp tool? For example I have some footage and I want to use the clone stamp tool frame by frame. I know how to use the tool right now but whatever I paint out is staying on for every frame.

From this page:
Common paint tool settings in the Paint panel
Duration
The duration of the paint stroke. Constant applies the stroke from the current frame to the end of the duration of the layer. Single Frame applies the stroke to the current frame only. Custom applies the stroke to the specified number of frames, beginning with the current frame. Write On applies the stroke from the current frame to the end of the duration of the layer and animates the End property of the stroke to match the motion with which the stroke was drawn.
I would suggest reading more on that page. Also, you'll probably find this page helpful as well.

In Photoshop 2014 how do you use the clone stamp tool and keep the image panel from moving

I don't quite know how to use the clone stamp tool in the Photoshop 2014 version. When I click on the clone stamp it creates a duplicate of the image and it moves around and I can not apply the clone stamp to the area I want to correct. How do you lock it down to keep it from moving?

Hi Smoothery4501,
The Photoshop clone stamp tool allows you to copy one area of an image and copy it onto another area.
Click on the clone stamp tool then press the alt key on the keyboard and click on the image to define a source point.
Please refer to below blog for further info
Clone Stamp Tool « Julieanne Kost's Blog
Thanks

Keeping 1 photo selected for printing AFTER editing

I still haven't adapted comfortably to iPhoto '08, because it's hard to change one of my iPhoto habits. Previously, after selecting a photo to edit, I'd click DONE and then go straight to File>Export or File>Print to output the edited photo. With iPhoto '08, no photo is selected after clicking DONE, but my habit is still to go straight to File>Export or File>Print anyway. Only after the export or print process begins, with a report that iPhoto has 86 photos to transfer, do I remember that iPhoto 08 acts as if the entire album or event has been selected after an Edit session--even if I only edited a single photo.
Software design should be incremental, not decremental, for the workflow to become more efficient. I think Apple knows this, so it must be something I'm overlooking. A preference setting, maybe? Can anyone offer a suggestion so that I don't waste more time (and photo paper and photo ink) having to reverse an ingrained habit? I'm a semipro photographer and this habit has been established over several years and versions of iPhoto, with thousands of images. Photoshop is great for only a portion of my photos...iPhoto can do the basics better and faster.
Thanks for any helpful suggestions.

I hardly ever use the Events mode, but I tried it just now. The yellow selection box stays after editing in Events mode, so it works there.
I went back into Photos mode, double-clicked on a photo to edit, just clicked Done without doing any editing, and the single photo stayed selected. It's when I actually do something (rotate, enhance, straighten, adjust, etc.) that clicking Done gets me back to the thumbnails without the yellow selection box.
The more I think about it, the more I think the iPhoto app and/or one of its components has gotten corrupted. Now, if I can only find my iLife '08 DVD to re-install iPhoto, I'll let you know what happens. In the meantime, I'm going to try removing preferences to see if the problem lies in a plist file somewhere.
Thanks for the great ideas! Appreciated.

PSE* onVista- after install clone stamp tool fails

A couple of uses after installing, the clone stamp tool bring up a message box COULD NOT USE THE CLONE STAMP TOOL BECAUSE OF A PROGRAM ERROR. Exactly the same error as occured with Version 6! I uninstalled V6, cleared directory entries etc and did fresh install, still the same problem. Now I go to use latest version in Version 8 and the same old. Any helpful suggestions? Thanks

Hi, Can you please tell which file and format you are working upon, Because as per my knowledge goes, this does not happen and it works very well for all my images.

Clone stamp tool - can't turn 'aligned sample' option off

HI, I am experiencing a problem with the clone stamp tool and healing brush tool where I uncheck the 'aligned sample' optiom, 'alt' click where I want the sampling to come from, then brush over the area I want to be affected. I have noticed that the results are the same as when the 'algned sample' option is on; the sampling is clearly following the brush just as when 'aligned sample' is checked. I have reset the tool with no effect. Anyone have a solution?
Thanks

Just to clarify, the Aligned option will cause multiple brush strokes to copy from the sampled area as though you had duplicated the sampled layer, hidden it with a mask, and now revealing it. With Aligned off, each brush stroke returns to the sampled area. For example, if you have cloned from a layer with the image of a face, sampling in one of the eyes, multiple brush strokes with Aligned on will result in the face filling in stroke by stroke. With Aligned off, a new eye will be cloned with each brush stroke. And by brush stroke I mean clicking and releasing mouse button.
If this is the behavior you are expecting by not getting and resetting the tool did not fix things, then it is time to reset the application preferences:
http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/how-to-reset-photoshop- cs6s-preferences-file/

Photos fail to print after editing with clone stamp tool and layers

Similar Messages

Maybe you are looking for