Photos from iphoto placed in imovie breakdown

Imovie 4.01, when I move photos from iphoto into the clip viewer the photo clips become unreadable on play back. About halfway through the clip the picture changes to gray with repeating black and white rows of small pixelated squares. This happens to most photos and always to the copied/pasted photo clips. I have placed photos in iphoto in the following formats: photoshop, pict and jpeg. None work. I create still frames from the photos in the clip window and in the clip viewer, no luck. The photo clips appear normally in the Clip Viewer strip but the photos play back as garbage. Please help.
Thank you
Randal
many Mac OS X (10.4.4)

Hi ranran:
Is this what it looks like?
iMovie 4: Vertical lines in still image
http://docs.info.apple.com/article.html?artnum=93785
Sue

Similar Messages

When I insert a photo from iPhoto in an iMovie video, it´s another photo that is displayed in the movie

When I insert a photo from iPhoto in an iMovie video, it´s another photo that is displayed in the movie.
I´ve tried to end iMovie, shut down the MacBook Pro, but the same problem happens again.

Hi
BUT
This can take times ! - I mean several Hours ! !
Last time I did this it took > 20 Hours (INTEL i7 4x4 processors - 2.2GHz)
AND - remember to connect Your MacBook (or laptop) to Mains-adaptor - as battery might run out !
Still - there is no alternative route to this (repair of iPhoto Library) suggested by Karsten !
Yours Bengt W

Photos from iPhoto used in iMovie

I previously posted this question in the iMovie community, but received no response. I'm hoping someone here will have some knowledge on my situation.
I have created 2 movies in iMovie that use some videos uploaded to iMovie and also some photos from iPhoto. I have since decided to move all of my photos to Adobe Lightroom. To do so, I have exported photos event by event from iPhoto to a new location, imported them into Lightroom, and then deleted the event from iPhoto. For those iPhoto events where I have used photos in iMovies, I have yet to delete the events from iPhoto. I assume that iMovie will be very confused about the location of the photos and will no longer be able to play the movie. Should I just keep these events in iPhoto in addition to having a copy of the photos in Lightroom? Can iMovie "see" photos in Lightroom, so I can create additional iMovies taking photos from Lightroom?
I have 2 goals here: 1) not break 2 existing iMovies that use photos from iPhoto, 2) be able to create new iMovies using video and also photos from Lightroom.
Is this possible?
iMac, Mac OS X (10.7.4)

You can check easily if iMovie will continue to work with photos after you've deleted them from iPhoto - simply make a quick project in iMovie and then delete the photos from iPhoto. I do believe they will but not absolutely certain.
No I don't believe you can share photos from LR to iMovie like you can from iPhoto or Aperture because LR has no knowledge or way of working with the Media Browser system. You'll need to export from it to the Finder and from there to iMovie.
Regards
TD

When I insert a photo from iPhoto into my iMovie, the photo that appears in the movie is different from the one that I inserted - why is this and how can I make it work properly?

When I insert a photo from iphoto into imovie, the photo that appears is different from the one that I inserted. Why is this and how can I make it work properly?

WHat version of iMovie, and iPhoto?
THIs forum is for iMovie iOS (iPads, iPhones).
Are you talking about iMovie for Mac?

How do I import photos from iPhoto into the iMovie Events window? I want to use photos in my iMovie trailer program

i want to use some of my photos from iPhoto library in the iMovie Trailer program - it won't let me import them. I tired to sneak them into the Events library but can't seem to be able to do that either when using the imovie trailer feature, I have to open up a different project to be able to import photos, but only able to drop them directly into a project, not the events folder -- I can't get photos into the event folder.

You cannot add photos to a trailer.
The solution is to get as far as you can in the Trailer withou adding the photos. Then, select the trailer in the Project Library List, and click FILE/CONVERT TO PROJECT. Now it is an iMovie Project, and you can do anything that iMovie can do, including add photos wherever you want.

Why is it when I add photos from iPhoto onto an iMovie project, it is not displayed when I play the movie from beginning to end, although I can see it in the (edit) format?

Hi everyone,
I'm just wondering why is it that when I place an image from iPhoto to an iMovie project, it is not displayed when I play it from beginning to end in fullscreen playback mode? However, when I exit it on the timeline, it is shown. All I did as drag it from the iPhoto column and place on at the beginning. I would really appreciate someones help because I really need to be able to place images onto my projects. Thanks!

Sounds like your talking about iMovie for Mac?
This is the iOS version, repost here:
iMovie

Im adding photos from iPhoto to an iMovie project.

I want them to be the same length for each photo. I follow the directions in the settings button, yet each seem to have an individual time.

i tried your suggestion and i am still having the same problem??

A number of imported photos from iphoto in imovie project all show the same image whilst the preview before dragging them in is correct. What could be the problem?

A number of photos from iphoto used in imovie project all show the same image when playing back. The previw when clicking and dragging them and also the pictures in the storyline. Yet when playing the clip a previous immage keeps on appearing. What could be the problem?

You created a mess and there is no solution - with the actions you have taken those photos are gone unless you have access to them from some other source - they existed in two place - in your iPhoto library and on your backup drive - you have traded the backup drive and restore an earlier iPhoto library so all you have is what you have
LN

Problems "pulling" photos from iPhoto into iMovie....

I am trying to create a movie with a combination of movie clips from my DV camera and photos from iPhoto (on my G5, 2ghz iMac). Movie clips are no problem. The problem occurs when I try and "pull" in more than 20 pics or so from iPhoto. I am trying to "pull" them in via "Media" and then "Photos". If I try and pull in a bunch, say more than 20, iMovie quits and I have to start all over again. Is this a bug and is there any workaround?

I actually think this is one area where iMovie6 does a lot better than iM5. My machine used to choke all the time when I would try to drag a whole bunch of photos into timeline. The reason is that whenever you bring in photos like that, they have to be rendered, so trying to render a whole lot of stuff is going to be time dependent based on your processor, memory etc. (and the settings you have for timelength, ken burns effect etc.) iM5 tried to render everything simultaneously and would always lock up on me. iM6 appears to render one at a time so it eventually finishes, but then I stopped trying to import large bunches of photos after my iM5 experience so I can't say where the limit is.
I've gotten so fond of playing with the ken burns effect and setting the start and stop points that I pretty much do all my images one at a time now because it can render the last one while I'm picking settings for my next one.
Imac G5 Mac OS X (10.4.3) 1Gb Ram

I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for that.

For anyone who has used "Smilebox" for greeting cards: I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for use with Smilebox.

For anyone who has used "Smilebox" for greeting cards: I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for use with Smilebox.

IMove Won't Import Photos from iPhoto Library Album

Tried to import photos from iPhoto Library/Selected Album. Pictures appeared in photos window but a high lighted photo did not appear in the large window. Tried dragging photos to build project, received message: ERROR DURING IMPORT: The file could not be imported: (-4960).
The files are 5 Megapixel JPEG, I tried to import photos from another Album (200 dpi) in size and received the same error Message. My Mac OS is: 10.4.2, iMovie HD 5.0.2 (111)
e-mail: [email protected]
Richard

"/* Core Foundation errors*/
enum {
coreFoundationUnknownErr = -4960
That is NOT a good error. Your Mac may be in serious trouble.
Prevent Mac Disasters
Eight Simple Steps You Can Take Now to Keep Your Mac from Falling Apart
http://www.macworld.com/2005/01/features/preventmacdisasters/index.php
(Article is in 3 parts, don't miss parts 2 and 3)

Can I delete photos from iPhoto that were used in an iMovie Project?

I made an iMovie Project with a lot of photos from iPhoto. I don't want some of the photos anymore. I would like to delete them from iPhoto but I am afraid it might affect the iMovie Project. Does any body know?

If you've finished the iMovie project and exported it to other media or file format, then yes, you can delete the files from iPhoto.
If the iMovie project isn't finished you should leave things alone.

Imovie won't load my itunes music and photos from iphoto.

Imovie won't load my itunes music and photos from iphoto. This also does not work on my garageband for itunes music. I have tried backing my itunes media and rebuilding but it has not helped. Anyone with a solution?

Note that you have to actually run the update - where you get the window where you have the choices to "Update" or "Restore" your iPod (you'll of course want to "Update"). It sounds to me like you downloaded the updater but did not actually run it to update your iPod.
Hope this helps.
PowerMac G5 DP 2GHz Mac OS X (10.4.3)

IMovie-how do I rotate clips of photos imported from iPhoto (verions of iMovie is 5.0.2)

I imported photos from iPhoto to iMovie. The photos had the correct orientation (rotation) in iPhoto but in iMovie they have all gone back to their original sideways position. Is there a way to rotate the clips in iMovie, version 5.0.2? I've spent hours on this so really don't want to start over.... please help!!

If you don't get an answer here, you may want to post the question in the iMovie discussion here.

IMovie '09 Won't Load Photos from iPhoto

I recently upgraded to iLife '09 at work and at home. My iMac at wok does fine with the up grade but iMovie on my intel based MacBook Pro won't load photos from iPhoto. Anyone else have this problem or can suggest what my problem may be? My software is up to date and other programs are working OK.

Hello, i have also had the same issue. Basically when i click on the photo icon in imovie 09 the library doesn't show,it's just blank but also my itunes library isn't showing up either. The only way i can get photos and music into imovie is by dragging them into imovie but thats not the way the program is meant to work and would also like to fix this issue. Any help would be greatly appreciated.

Photos from iphoto placed in imovie breakdown

Similar Messages

Maybe you are looking for