Photos, graphics and attached files with emailsI

I have the following problem with emails containing photos or graphics or when loading attached files : Half of the time, I cant see photos or graphics, I have empty frames. Loading attached files will never start and stay at 0 % I have set to load pictures. But even with the parameter set to "do not load picture " and using the " loading photos " button it s the same : not always working. Do you have it too? I have also the "retreiving... " message when I want to read mail. Thank you.

Am I the only one to have this issue ?
If someone could answer me : form time to time (half of the time...) I can't see photos or graphivs in my mails, I just have an empty frame...

Similar Messages

  • How to attach file with an email in travel and expenses

    Hi Experts,
    I am new to sap cloud application studio.
    We have requirement that need to attach any type of files in the mail,
    I have gone through this : How to send an email with attachments in SAP Cloud Application Studio
    But compilation error at import AP.FO.ACTIVITY.GLOBAL., so not able to work with that lines of code.
    I am using these lines of code to send email.
    EMailUtilities.SendEMail(lang, bcc, cc, toAddress, htmlContent, from name, subject);
    So am not able to getting how to attach file with this code.
    Please help me regarding this.
    Thanks & Regards,
    Preethi Ande

    Hi Preethi,
         I am trying to send mail from custom BO in Travel on Demand System.I am getting  compilation error.please look into the attached screenshot for the code.
    Please assist me on this,                                Thanks in advance
    regards,
    Sendhilazhagan

  • I have my camera (Canon 5D MARK 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images.  Aperture put ab

    I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images.  Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs.  What am I missing?
    Thanks,
    upsjdris

    Have you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
    You can set Aperture to import raw, jpeg, or raw&jpeg.
    If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
    Photos > Use Raw as original.
    Regards
    Léonie

  • When I import TIF and JPG files with same metadata, only the TIF files are imported. How can I change that?

    I have imported and renamed TIF and JPG files with the same metadata re recording date and time. Only the TIF files are imported, the JPG files remain unimproved. Thus I have in the Finder e. g. 13 image files in the same folder in which Lightroom only finds 10 files. Any ideas for resolution welcome!
    Thanks

    Turn off the option Preferences > General > Treat JPEG Files Next To Raw Files As Separate Photos.  Then do an import again.  It appears that, in this instance, LR considers a TIFF to be a "raw" file.

  • Why can't I attach files with my hotmail account on my mac pro since I upgraded to lion?

    why can't I attach files with my hotmail account on my mac pro since I upgraded to lion?

    i can' t believe it but after 3 hours of reading everything i could find on this subject i discovered the answer on accident: IT'S THE CLOCK!!!!! I know that it sounds crazy but go to settings and go to date and time and set it to the automatic date and time, even if it's the wrong time. after i did that, everything worked perfectly! aldiko accepted my adobe id and imported my purchased book happily.  i hope it is that easy for everyone, best of luck.

  • Sharing Photo, Video and Music files

    My new iMac has arrived and I'm looking forward to transferring across all my files at the weekend and to starting to use it.
    We use the computer as a family computer although we have different accounts on the computer. I would like to enable all members of the family to have access to all photo, video and music files when they are signed into their individual accounts and using iLife.
    My question is this: where should I place these files to enable common access. At the moment they are stored under my user name and therefore only I can access them. A slight refinement on this is that although I want to encourage the kids to use iLife and develop their skills in this area, I want to make sure that they don't delete/alter any of the original files so would ideally like them to save any changes they make in a new file under their accounts.
    Hopefully this makes sense!

    harris101
    I want to make sure that they don't delete/alter any of the original files so would ideally like them to save any changes they make in a new file under their accounts.
    What you mean by 'share'.
    If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
    Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
    Remember iPhoto must be running in both accounts for this to work.
    To protect your own user account:
    Create a new Account on your Mac, call it Media. Create an iPhoto Library there. (BTW: This will work for iTunes too.)
    Enable Sharing on the Library:(Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other accounts. In those accounts, enable 'Look For Shared Libraries'. The Library will appear in the other source pane.
    This means that both users will be able to see the pics. If you want to use a pic then simply drag it from the shared Library to your own in the iPhoto Window. This means that each user can have their own edits.
    If you want to add photos to the Library: Log into the Media account for that purpose.
    To make it all seamless: Set your Mac to log into the Media Account automatically. Set iPhoto to launch on log-in. Then switch to your own account using Fast User Switching.
    Net result: a Library that's permanently available to all users but also protected. Each user can have their own versions of the pics if they want.
    Regards
    TD

  • [svn:fx-trunk] 7661: Change from charset=iso-8859-1" to charset=utf-8" and save file with utf-8 encoding.

    Revision: 7661
    Author:   [email protected]
    Date:     2009-06-08 17:50:12 -0700 (Mon, 08 Jun 2009)
    Log Message:
    Change from charset=iso-8859-1" to charset=utf-8" and save file with utf-8 encoding.
    QA Notes:
    Doc Notes:
    Bugs: SDK-21636
    Reviewers: Corey
    Ticket Links:
        http://bugs.adobe.com/jira/browse/iso-8859
        http://bugs.adobe.com/jira/browse/utf-8
        http://bugs.adobe.com/jira/browse/utf-8
        http://bugs.adobe.com/jira/browse/SDK-21636
    Modified Paths:
        flex/sdk/trunk/templates/swfobject/index.template.html

    same problem here with wl8.1
    have you sold it and if yes, how?
    thanks

  • My macbook won't strat and show file with question mark on it?

    Hi
    is there anyone can help me please my macbook can't boot and show file with "?"mark on it. 

    Restart and hold command + R (both keys) down. The screen will show four options. Select Disk Utility. Next click on the name of your drive, and run Repair Disk.
    After that is done, restart in the usual way.

  • Do we need to format data and log files with 64k cluster size for sql server 2012?

    Do we need to format data and log files with 64k cluster size for sql server 2012?
    Does this best practice still applies to sql server 2012 & 2014?

    Yes.  The extent size of SQL Server data files, and the max log block size have not changed with the new versions, so the guidance should remain the same.
    Microsoft SQL Server Storage Engine PM

  • What does it means when you turn on the macbook and a file with a "?" mark flashes?

    What does it means when you turn on the macbook and a file with a "?" mark flashes?

    It usually means some system files are missing or corrupted. Reinstalling OS X is the fix:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • How do I create a product or item database so I can search fr the product and its files with hte pro

    How do I create a product or item database so I can search for the product and its files with the products name or four digit code

    Ok so I made some progress on this. I have figured out, that I can add a chained "add to cart" to certain items, then when they click the button for Buy now, it will add both items to the cart. However, this would require me to manually build each product page and generate a custom button for each one with both product IDs in it.
    Can anyone offer help on how to put some JS in that would append a second function to the onclick function that BC Generates dynamically?
    For the products that require a set up fee, I would assume I would add in to either the product templates or in to the item description some JS that would find the onclick of the buynow button and append a second function to also add to cart the setup fee product. The end result being code that looks like this:
    <input type="submit" class="productSubmitInput" onclick="AddToCart(188536,6314368,'',4,'','',true);AddToCart(188536,6314367,'',4,'','',tr ue);return false;" value="Buy Now" name="AddToCart_Submit" />
    Except of course, the product ID on the first AddToCart would be the main product with the second one being the one appended.
    Does any of that make sense? lol

  • How can I upload and download files with uiXML?

    I want to implement upload and download files with uiXML. In some previouse topic I got answare to look in AbstractPageBroker class in JavaDOC. I did it but this is a very-very little resolution description for this problem. I think for developers YOU (UIX Team) must in very quick time to put some examples on the NET because this is a nice technology but with adecvate samplase and developers guide it will be dead very soon. I digging this forum for information. I see many many people have same problems about this technology. They like it and want to use and try but documentation is very very poor.
    WE WANT EXAMPLES and separate forum for UIX. I think it deserve this.
    If You have any more detailed documentation would be nice to put on the net. I have uixdemo.zip file but this is in very early fase of development. I downloaded it before fwe months. And now I can't find it anymore on youre site. What happend?

    Attila -
    I went back and re-read the JavaDoc for AbstractPageBroker and MultipartFormItem and put together the following sample PageBroker based on the description from the JavaDoc:
    import java.io.File;
    import java.io.FileOutputStream;
    import java.io.IOException;
    import javax.servlet.ServletConfig;
    import javax.servlet.ServletContext;
    import oracle.cabo.servlet.BajaContext;
    import oracle.cabo.servlet.Page;
    import oracle.cabo.share.util.MultipartFormItem;
    import oracle.cabo.servlet.xml.UIXPageBroker;
    * An extension of UIXPageBroker which stores all uploaded
    * files in the temporary directory.
    public class UploadingPageBroker extends UIXPageBroker
    * Override of AbstractPageBroker.doUploadFile() which saves
    * all files to the temporary directory.
    protected String doUploadFile(
    BajaContext context,
    Page page,
    MultipartFormItem item) throws IOException
    // Get the location of the file to create in the temp directory.
    // Of course a real application probably wouldn't upload files to
    // the temp directory - just using this contrived example to
    // demonstrate basic uploading support.
    File file = _getFile(context, item);
    if (file != null)
    // Create a FileOutputStream. Of course, a real application would
    // probably want to buffer the output
    FileOutputStream out = new FileOutputStream(file);
    // Write out the file
    item.writeFile(out);
    // Close up the output stream
    out.close();
    // We can return a value here to add to the PageEvent
    // if so desired.
    return null;
    // Gets the File for the item that we are uploading
    private File _getFile(
    BajaContext context,
    MultipartFormItem item
    // Get the file name
    String name = item.getFilename();
    // If we don't have a file, bail...
    if (name == null)
    return null;
    // Get the path to the temporary directory
    File dir = _getTempDir();
    // Return the File object
    return new File(dir, name);
    // Returns the path to the temprary directory
    private File _getTempDir()
    // Get the temporary directory from the ServletContext
    ServletConfig sConfig = getServlet().getServletConfig();
    ServletContext sContext = sConfig.getServletContext();
    return (File)sContext.getAttribute("javax.servlet.context.tempdir");
    In this sample, each uploaded file is simply saved in the temporary directory. You'll want to replace the code that creates the FileOutputStream for the uploaded file to use whatever OutputStream makes sense for your application.
    BTW - I used the following UIX page to test this out:
    <?xml version="1.0" encoding="UTF-8"?>
    <page xmlns="http://xmlns.oracle.com/uix/controller">
    <content>
    <pageLayout xmlns="http://xmlns.oracle.com/uix/ui">
    <contents>
    <form name="uploadForm" usesUpload="true">
    <contents>
    <fileUpload name="uploadedFile"/>
    <submitButton name="upload" text="Upload"/>
    </contents>
    </form>
    </contents>
    </pageLayout>
    </content>
    </page>
    Hope this sample helps with the uploading part of your question. I'll see if I can provide a download sample in a later post.

  • Sharing sequence and related files with an editor

    How do I share the edl and related files with an editor I'm working with?
    Basically, need to copy both the project and the related files to another computer. 

    Copy the source files and the project file and  related files to a hardrive.
    Import them on other computer.
    Export EDL from original computer.
    Import and Open EDL in other computer.

  • Cannot read version 4 fcp project and associated files with the new 5.1.2

    I cannot read my fcp 4 version projects and associated files with the new 5.1.2 fcp.
    Please help!

    I bought the Final Cut 5 studio to use for my company but I have project files from version 4, which I would like to update. My G5 is running Tiger and Final Cut recognizes the old files as Final Cut Documents (the media is already on the G5) but will not open them or their associated quicktime files. I have no problem loading version4 to export the Masters but I would like to be able to upgrade the project files so that I can use them in my addition Studio Pro applications and touch them up in Shake. Also, I don't want to go and find FCP4 on the internet because it may have other problems.
    What do you suggest?
    Can FCP4 files be updated to version 5.1.2?
    Can I get a back dated version of FCP4 through Apple?
    Thanks for your time.

  • Dng and tif file with the same name, in the same Lightroom folder

    If I have both a dng and tif file with the same name, in the same Lightroom folder, I can only see and access one of them. Is there a setting I can change in order to see both of them?

    If you can only see one of them, which one can you see?
    Was the DNG and the TIF imported at the same time?
    How are you trying to "access" the files?
    The more details you can provide, the more likely it is that someone will be able to help you.

Maybe you are looking for