Photos is hangs first time using

Just installed 10.10.3 and tried Photos. Went through a couple introductory screens, turned down iCloud syncing (I think), now it is just hanging for 12 hours now. When I try to see what iCloud is doing from Preferences it is also hanging and won't let me in. I'm afraid of killing the process for fear of losing my 120gb photo library.
The screen it is hanging on is white background, and say Icloud Photo Library with a button that say "Use iCloud Photo Library", not now, learn more and a picture of a mac and iPhone and Ipad. When I try to click the red button in the upper left hand corner it stays greyed out and won't let me close.
Not sure how to get back to seeing my pictures.
Running 10.10.3 on a 2013 27" imac.

Similar Messages

First time using imovie

hi, its my first time using imovie and i'm very impressed by this prog. i'm able to figure out how to insert music.... fonts...etc...etc.... but i just cant figure out how to insert photos!!!! horrible!!!
Currently i'm creating my movie using one of the themes in the program. Everything's done except inserting picture's in those grey boxes.
How do i do that?
Please help!!!
A million Thanks!!!
Message was edited by: sistawen

It took me some time to spot the link to where the instruction manuals were for imovie, take a look it might help you and any other users (including myself) in using the software.
Here's the link http://www.apple.com/support/manuals/imovie/

I have continuous problems with my iPad Mini, and it is getting worse! Newstand application keep pausing or crashing, websites keep hanging first time in but then open fine the second time, and I have problems with applictions crashing.

I have continuous problems with my iPad Mini, and it is getting worse! Newstand application keep pausing or crashing, websites keep hanging first time in but then open fine the second time, and I have problems with applictions crashing. Has anyone experienced similar problems and any suggestions?

Has the device always behaved this way? Did this start as a result of an update to the iOS software? If the problem is that bad, you should probably restore the iOS software and then restore from a backup. If that fails, restore as new and rebuild the device. If that fails, it's time for a trip to an Apple Store to let them have a look at the iPad.
Use iTunes to restore your iOS device to factory settings

HT201302 I have a new iPod Touch and am trying to download photos for the first time. Both iPhoto & Image Capture recognize the device but don't seem to recognize the photos, or at least I can't import them. Nothing happens when I click on anything in e

I have a new iPod Touch and am trying to download photos for the first time. Both iPhoto & Image Capture recognize the device but don't seem to recognize the photos, or at least I can't import them. Nothing happens when I click on anything in either.

If you manually open iPhoto do you not see the photos?
Maybe here:
iOS: Unable to import photos or device not recognized as a camera
Yu are trying to impoort photos taken by or saved to the iPod, right? If the photos were synced to the iPod then iPhot does not work.

First time using "Nokia N8 Ovi Map"

hello,
im first time using my n8 ovi map, and i wonder why it took hours for checking for my position,
after 2-3 hours of waiting, it still searching for my position. instead of keep waiting, i switch to walking mode, and set a destination, now it shows "waiting for GPS". i have been waiting for more than 1 hour, sadly it still showing "waiting for GPS". Anyone experiences this problem before? please provide me some solutions. thanks.

@NokiN8Silver
Welcome to the forum!
You might try as a temporary measure going to Menu > Settings > Application settings > Positioning > Positioning methods - only enable Integrated GPS then go outside away from tall buildings and it should lock on to satellites within 20 -30 minutes; once position established subsequent satellite lock on will be much more rapid.
Happy to have helped forum with a Support Ratio = 42.5

Qosmio F60 - Each time it starts up, says it is first-time use

My notebook has just come back from being repaired (they replaced the hard-drive). Now every time I turn it on or it restarts, it says that Windows is configuring the computer for first-time use. Once on, the control panel pops up with 'How to customise your computer'. Plus, a small window pops up with "System Preparation Tool 3.14" and even if I click OK, it doesn't work.
Otherwise my computer works normally.
How do I stop my notebook from thinking it's starting for the first time?

Hi buddy,
> a small window pops up with "System Preparation Tool 3.14" and even if I click OK, it doesn't work.
And what happens if you dont click on this tool?
Maybe the notebook was reinstalled from authorized service provider and so the installation must be finished.
Otherwise I would recommend reinstalling Windows from Toshiba recovery disk again. Maybe something went wrong during installation and so it would be necessary to reinstall Windows again.
Check this!!!

Help.. First Time Using DVD Studio Pro!!

OK .. this is my first time using DVD Studio Pro. Before this I have always used IDVD for my Final Cut Projects, but I now need to branch out!
I've hit a bit of a brick wall. I've watched the video tutorials and tried to read the instruction manual, but it's heavy going!!!.. can someone help me get over the hump?
Here's where I've got to:
- In my Assets tab I have my two file - Test.mov QT Video File and Test.mov QT Audio file. Both are yellow uncompressed video. I also have a templates folder.
- I chose the template called brush cover which I can see under the menu tab on a window. If I go to that same window and select the graphical tab I can see a menu 1 and track 1.
- In my timeline I have dragged my Video and adui assets over and can see them and actually play the movie.
- What is also worth mentioning is that I can also see the 18 chapter markers that I created in FCP.
- Now I hit the brick wall!!.
- Back in my menu I see 8 buttons. In my timeline I have 18 chapters. How do I transfer my 18 chapters over to my menu so that I have 18 buttons each one representing a chapter?
- I'm sure that it's obvious and a silly question.. but for a rookie like me who's trying to figure this out from scratch it's not easy!
Thanks for any advise!!.. also if anyone has a good 'idiot's guide' for ex iDVD people moving to DVD Pro then I'd really appreciate it!
Many Thanks!
Steve.
-

Steve
Back in my menu I see 8 buttons. In my timeline I have 18 chapters. How do I transfer my 18 chapters over to my menu so that I have 18 buttons each one representing a chapter?
You can duplicate your 8 buttons menu so many time as you need to include your 18 chapters, creating a simple new button to navigate through Chapter Menu1, Chapter Menu2, etc.
Or you can duplicte&resize buttons to fit more of them in a single menu, but 18 button chapters could be too much for a comfortable navigation.
Thanks for any advise!!.. also if anyone has a good 'idiot's guide' for ex iDVD people moving to DVD Pro then I'd really appreciate it!
You can use the Search feature in this forum and almost for sure you'll find any answer you need, in particular for basic stuff.
You can visit Drew13's site [DVD Step by Step|http://www.dvdstepbystep.com] for some good tutorials, and Drew13 uses to stay tuned here to help you too!
And sometimes Google helps too !
Hope that helps !
Alberto

Computer keeps Configuring and setting up for first time use

I have a toshiba A505-S6980 that has been working fine for a couple years. Recently I had performance issues and suspected virus, spyware so I did a recovery with the original discs I made when I first got the computer. Four of the six discs reloaded fine. It did not ask for the last two discs "Environment 64 bit and Applications and Drives. I also have a System Repair disc. After loading the four recovery discs the computer now keeps recycling between preparing for first time use, configuring system, reboot and then back to preparing for first time use,etc. I think I'm close to getting this, but need a last bit of help.
Thanks

It's been a couple days since you posted this problem. Did you get anywhere, or are you still stuck in that loop? If it's still stuck, you may just want to perform the recovery again.
- Peter

SQL Server Management Studio - Configuring the environment for first time use

Hi
I have recently switched my local 'My Documents' folder location to a network drive that I 'make available off line' to allow on-line/off-line work and synchronisation when I am working in and out of the office.
When I load my SQL Server Management Studio 2005 I frequently get 'Microsoft SQL Server Management Studio is configuring the environment for first time use'.
Management Studio them loads and I can continue without problem.
I am guessing it is trying to make reference to some settings file. Any ideas? I wonder if I can change/move these settings elsewhere to a local drive?
Thanks

Hi,
There is bug report of this issue:
http://connect.microsoft.com/SQLServer/feedback/details/126364/configuring-enviroment-for-the-first-time-every-time-in-ms-sql-server-management-express
"SQL Server Management Studio Express saves the settings for the user in ...\Documents and Settings\<User Profile>\Local Settings\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
and in ...\Documents and Settings\<user profile>\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
if any of these files are not available or unusable, SSMSE will generate new ones."
Hope this helps.
BR,
JoukoK

Hi I have put money on my apple account and since it's my first time using it I have to answer my security question but I don't remember the answer and when I go forgot answer they send you a code to your email but I have also forgotten my email password

Hi I have put money on my apple account and since it's my first time using it I have to answer my security question but I don't remember the answer and when I go forgot answer they send you a code to your email but I have also forgotten my email password.

Reset Security Questions
http://support.apple.com/kb/HT5312
If you can't solve problem, call Apple to help reset your Security Question.
http://support.apple.com/kb/HT5699

X230 - Setup Is Preparing Your Computer For First Time Use

Dear all,
I just received my X230 bought on Ebay and as I first turned on the computer, Windows was frozen and showed "Setup Is Preparing Your Computer For First Time Use" for hours (I guess its a whole day). Since I do not have any recovery media provided, does anyone has alternative solution?
Thanks in advance!

Thanks! It took me a whole day to figure out what happened and I ended up format the whole drive and reinstall the windows. Yes, you are right, X230 is a good machine and acutally I was thinking to puchase X240 since there is kind of back to school program that you can purchase X240 at a deep discount price. After so many bad comments I chose X230 instead for:
1. Physical Trackpad button (which is extremely important as I ONLY use trackpoint)
2. 2 ram slots
3. normal voltage CPU
I am surfing the net with X230 and I am so happy I bought this.

First time using don't know how to insert the video to start editing

first time using don't know how to insert the video to start editing

First thing you should know is that After Effects is not a video editor. Premiere is for putting shots together to tell stories (which is editing), After Effects is for creating those shots (compositing and visual effects) and creating motion graphics.
To use AE, start here: Getting started with After Effects

First time using external hard drive for backup of computer....

First time using external hard drive for backup of computer....it asks "Do do you want to erase disk?" In order to proceed, I have to say "yes" ... is that what I want to do? ...Seems like I'm skipping a step...

To use Disk Utilities, attach the drive, open Finder > Applications > Utilities > Disk Utilities and then highlight the LaCie drive in the left panel of the DU window. In the right panel, choose the Partition button top center of the pane. Then decide how many partitions you want on the drive, one is just fine.
Then choose the format, the default is Mac OS Extended (Journaled) which is prefered.
Then name the partition or drive.
Then choose the partition table, the default is GUID which is prefered.
Then Apply and you will get to confirm that you want to erase and format the drive.
Quit DU and you are ready to go.

First time using ical. Adding an invitee and ical does not accept address

First time using ical. adding invitee and ical does not accept address

CHRIS A123,
Welcome to Apple Discussions.
1. Quit iCal, and open System Preferences...>Language & Text>Formats>Region:>reset/choose the appropriate region...also check what you have set in Dates/Times
2. If that is unsuccessful, I also recommend using the Mac OS X v10.6.2 Update (Combo).
;~)

First time using iphone~~

first time using iphone~~
hello there~~
i need to know how to activate iphone 4..
do i need to register itunes for activate phone 4..??
or not..?? and i don't have credit card...
can i activate iphone 4 without register itunes and without using credit card ...??
im sorry~ i just new with iphone 4... pls help me...

to activate iphone, you should connect your iphone to your computer which should have itunes via your usb cable provided with your iphone problem. and you don't need to register an account to activate the iphone. but you need to register to download apps for iphone.
it have to be unlocked to work with other country's normal sim card. you should have a malaysian mini sim card to make a normal at&t iphone work in malaysia and other countries.
if you want to know about unloked phones, go to this webpage-> http://www.tgdaily.com/mobility-opinion/33600-unlocking-the-iphone-what-does-it- mean definition for unlocking--->
Unlocked is the term used to describe mobile phones that are not tied to a particular service provider in order to be used. Many cell phones are tied to a single cellular provider at their introduction, but are later unlocked for use on many networks.

Photos is hangs first time using

Similar Messages

Maybe you are looking for