Photos - itouch accepts only 1 folder at a time

New itouch, has tons of storage space. I can install only one folder of pictures. If I try installing a second folder, the second folder will install but the first folder will automatically be removed. When I manually choose a photo folder to be installed in itunes, the "sync" button is not present but 2 buttons are: "revert" and "apply". Thanks for your help.

Turns out that iTunes fails if there's more than one layer of sub-folder, and rather than creating 'albums', it puts all photos into your Photo Library. Here's a thread I started that explains further: http://discussions.apple.com/thread.jspa?threadID=2771267&tstart=0

Similar Messages

  • Photos Sync just 1 folder at a time from windows 7 laptop to iPad

    I can only sync 1 folder of photos from my Laptop to my iPad. I am unable to change the 1 folder or select all folders in iTunes. Anyone help?

    Yes, you can only sync on folder of photo o the iPad. However, you can have one level of subfolder in that one syncing folder. I do not understand about not being able to change the one folder. In the Photos pane for your iPad under Devices in iTunes you can select the one syncing folder.

  • Elements 9 Organizer only imports one folder at a time

    Well I purchased Elements 9 after not being happy with the products included with my camera's.
    System is an i950 processor, Windows 7 Ultimate 64bit, 12 GB RAM, 120GB SSD and a 1 TB hard drive.  Basically a system that gives me no trouble with any other software, for the most part, crash free.
    I have a home server that runs on a gigabit network.
    Pictures folder has about 25000 pictures.
    My biggest problem from the beginning was importing my pictures.
    I would do an import on the mapped drive for Photos and not all would be imported when I checked back later.
    Then the issues increased when I would go in and actually try to import more than one folder at a time.  All that would happen would be that the first folders contents would get imported but the second folder would get ignored.
    If I highlighted 10 folders, only the first one would import.
    Big big pain in the behind when you have things organized properly.
    Also, must say that the organizer portion is buggy.  Crashes a lot, and on a system like mine it shouldn't be slow to react which it is.
    Haven't even got to the editor portion yet.  Hope it isn't worse.
    Merry Christmas everyone!!
    Message title was edited by: Brett N

    Finally, thanks Brett for replying.
    Now I don't think this is just one person having the issue, in fact I would check on Amazon as there are a few reviews that state the same type of problems.
    Editing seems to be great, it is the organizer that is the issue.
    I do feel that Adobe took their time responding on here as you can see from some of the comments.
    Being a director for a company that does managed services and network support for customers, I do understand the need for responses in a reasonable amount of time.
    I am running off a home server in response to your question.
    I have a C: drive that is a 120 GB SSD with 60 GB free.
    I have a D drive that is a 1TB drive with over 700 GB free.
    1 Gb wired network connection to 1 Gb switches.   As I said, I manage an IT company, plus I have 2 degrees in computer science and have been working with PC's since DOS 5, and computers since 1979.  I have checked the obvious, and also run Pinnacle Media Studio 14 on the same system and have no issues with anything, and that is video.
    If you don't recommend working with files off a network, then this should be stated up front, not as a response to a problem.
    Again, no problem with Microsofts built in applications getting pictures, tagging them, and doing face recognition on the same files and folders.
    Tried what you suggested.
    Have a family folder that has 7 subfolders relating to different people.
    Tried to import the family folder....it did, with nothing in it.  Had to import the subfolders individually.
    Are you being smart with your "awesome" comment?
    If you aren't, you may want to rethink how you respond to customers.
    Again, this coming from someone who manages service people in this industry.
    At the end of all of this, many people are having similar problems due to this slowing down, running things in the background, etc.
    If you want to be in a state of blaming the individuals or the network protocols, or what we shouldn't do, then continue and customers will speak with their dollars and their voices on other forums as they are doing right now.
    I think Adobe would be much further ahead if they accepted that there are issues and let us buyers know that they are working on it and will fix it.
    We will see how the responses you get from others pan out.
    As of now, I am using the live gallery that you can download with Windows Live Essentials to organize and it does a great job so far.
    Imported all my pictures from my mapped drive, subfolders intact, in fact, I just told it where my picture folders were and it did the rest on it's own.
    Just would have been nice having one program to do it all.

  • Before updating my iphone 3G to iOS 5 all the photos i synced were lpaced in my photo gallery only. Know I have both Photo gallery and The folder I synced

    Before updating my iphone 3G to iOS 5 all the photos i synced were lpaced in my photo gallery only. Know I have both Photo gallery and The folder I synced. Can somebody help me and tell me how can i have it the old way? if its applicable. Thank you

    Hi Urs
    I searched a lot and maybe found a part of the reason for this high data traffic.
    I'm synchronizing my contacts, calendar & reminder with iCloud & my mail with Hotmail.
    When push is activated for Hotmail, that doesn't matter, but when push is activated for iCloud, the amount of data nearly explodes. So I turned iCloud to manual and let Hotmail on push.
    Contacts, calendar & reminder are synchronizing when opened (I think this is enough).
    Also I do a backup on iCloud and than I deactivate the function (I do not delete the last backup, I only deactivate the option for automatic backup).
    It seems, that the backup functionality also generates traffic when not on WiFi - especially at night!!
    The battery life has been getting better, when I deactivated the support for automatic time zone changes (location services were always on).
    The battery finaly got MUCH BETTER since the update on iOS 5.0.1.
    My traffic is actually higher than on iOS 4 but not so high as before I deactivated some services...
    I hope this info is a little help for you!!
    Let me know if this works for you, ok?
    Best regards,
    Wolfgang

  • Why do only some photos appear in iCloud folder on my PC and not all taken on iPhone appear on iPad either? All settings seem correct and new photos now seem to be appearing on all devices, but not all older or recent photos

    Why do only some photos appear in iCloud folder on my PC and not all taken on iPhone appear on iPad either? All settings seem correct and new photos now seem to be appearing on all devices, but not all older or recent photos, even if taken at same time. All advice greatly appreciated.

    First, to access documents you must use an app designed for that specific Document type. So Pages will not be able to open PDFs. The Documents app by Readdle can handle PDFs though. In the latter case, you'd open the app, click the menu icon at its top left, and click Open to go to your iCloud Drive. With Pages, if you had files outside the main Pages folder, click + then iCloud and navigate to the file's location.
    Matt

  • Time machine is not backing up photos in iphoto9 /Originals folder

    Just figure out the reason to cause lost of my photos after restore from Time Machine Backup:
    time machine is not backing up photos in iphoto/Originals folder from month ago;
    Here was how I tested the problem, I don't know why TM stop doing backup folder
    1) Import some new pictures from camera to iphoto library --> FINE , I can view the new imports in iphoto and also I can find the copies of imported files under iphoto Library/Originals (by Show package content)
    2) I closed iphoto and I manually ask TM to backup.
    3) After TM is done, I go to backup in TM, all newly imported photos are missing in the
    TM backup which I just created 5 min ago.!!
    No matter what, Apple need to fix this bug!!! How many people lost their precious data
    because iphoto & TM???? I will go back to 3rd party software to manually import photos
    and manage photos. You never know what's next bug and the result is very serious.
    I knew someone lost the whole year photos. !!! Be cautious!!!!!!
    AND I think somehow it is bug in the iphoto............
    PLease reply if you have similar problem!

    I just lost 6 months of photos! Same problem. Not sure why Time Machine did not back them up. I couldnt even get my iphoto '09 disk to install. Had to buy the new version because the system crashed.
    Any thoughts on how to find the 6 months of photos that are missing? Only thing I can think of is that iphoto started saving the new photos in a new library. Is that possible? If so where would I find it in my TM back ups?
    I really dislike Apple right now... I thought they never crashed.

  • Why can I not rotate and re-save iPhone photos once I import them to my PC? They are not being saved into a Read-Only folder. And why can't I open them or save them when I email them to myself?

    Hi I'm having trouble with the photos from my iPhone.
    When I import them to my PC, it won't let me rotate them and re-save them. It says that there is a problem with the file's properties or they may be in a read-only folder. The latter is not the case.
    I have tried opening them in several programmes but Windows Photo Viewer is default
    Also when I email them to myself I can't open them or save them down to my computer.
    Is there a setting on my iPhone that I should change that is impacting on the photo's file properties? This has only just started happening.
    Thanks!
    Cameron

    Hi I'm having trouble with the photos from my iPhone.
    When I import them to my PC, it won't let me rotate them and re-save them. It says that there is a problem with the file's properties or they may be in a read-only folder. The latter is not the case.
    I have tried opening them in several programmes but Windows Photo Viewer is default
    Also when I email them to myself I can't open them or save them down to my computer.
    Is there a setting on my iPhone that I should change that is impacting on the photo's file properties? This has only just started happening.
    Thanks!
    Cameron

  • HT201317 Dear Sir/Madam i want to tell you that I am very disappointed because I just read that in photo stream my photos are stored only for (30) thirty days.I didn't know that and i didn't have the time to save them on a device.I was robbed of mobile al

    Dear Sir/Madam
    I want to tell you that I am very disappointed because I just read that in photo stream my photos are stored only for (30) thirty days.I didn't know that and I didn't have the time to save them on a device.
    I was robbed of mobile before (3) three days and I lost 2.000 photos!
    Is there any possibility to retrieve them?
    If it was possible that would be great as I would save them immediately to my computer instead of losing them again.
    Thank you for understanding
    Kind Regards
    Giaourtsakis Kleanthis

    If you were trying to get this apple, you would do it here:  https://getsupport.apple.com/

  • Hi icant sync my photos from itunes to iphone ..it shows copying 1 out of something but afterwards it stops and no photos in iphone ..i formatted several times ..and from my utunes i have sync my brothers iphone it synced prefectly only its problm of my p

    hi icant sync my photos from itunes to iphone ..it shows copying 1 out of something but afterwards it stops and no photos in iphone ..i formatted several times ..and from my utunes i have sync my brothers iphone it synced prefectly only its problm of my iphone .......i have also deleted the ipod photo cache but still the same

    can any 1 help me

  • I created a photo album on my iPhone 4s - edited photos etc. but I cannot figure out how to transfer it to my pc (using Windows 8).  The only folder in the iphone drive is the one which has the Camera roll photos :( Help please - I really need the photos!

    I created a photo album on my iPhone 4s - edited photos etc. but I cannot figure out how to transfer it to my pc (using Windows 8).  The only folder in the iphone drive is the one which has the Camera roll photos Help please - I really need the photos!

    The camera roll is not part of the sync process at all.
    You should be importing these photos to your computer regularly as you would with any digital camera.  Youc an organize them on your computer and sync the to the iphone if you wish.
    The photos sync from the computer to the iphone is one way.
    The iphone mirrors the selected content of the computer to which it is synced.

  • HT204655 how do i choose a photos folder for my screen saver.  iPhoto used to be listed as a dropdown choice.  now only folder is listed.

    how do i choose a photos folder for my screen saver.  iPhoto used to be listed as a dropdown choice.  now only folder is listed.

    You cannot take a folder out of the Trash to your Desktop without erasing the one on the Desktop. You need to first change the name of the folder on the Desktop. Or you can open the folder that's in the Trash and drag the files onto the Desktop assuming there aren't too many of them.
    But if you have a duplicate on the Desktop why do you need to remove the one that's in the Trash?
    If you feel you must take the folder out of the Trash, then you need to rename the duplicate that's on your Desktop.
    If you wish to put the folder back where it was when you deleted it, then open the Trash window, select the folder, then CTRL- or RIGHT-click and select "Put Back" from the context menu.

  • Why does my iPod say I have 352 photos where I only have 24

    Ok so I just relaxed my iPod touch because my last one broke. Everything has been covered with iCloud, so I have everything I had before...accept for most of my photos. I had about 325 photos and ipthey are in photo stream (my iPad and iPod share the same photos) and I only received 24 pf them. The thing that ****** me off is that with the 24 photos I have it still says I have the photos I had before and it's making a lot of space on my iPod. All in all how can I get the old photos back?

    I managed to get rid of the phantom usage. Restoring iPhone and resetting the phone settings/data do not work for me.
    I had to move the Date on my phone earlier by 1,2,3 months and found the phantom photos in the Recently Deleted Folder. Next, I deleted the photos manually from the Recently Deleted Folder and the usage got freed up from my iPhone.
    Hope this works for you

  • TS4253 I have over 100 photos, the unedited version of those photos is the only item that downloads onto Shutterfly or my computer. The Apple solution is to email each individual photo(over 100 of them)to yourself & then copy the image from the email  Ser

    I have over 100 photos, the unedited version of those photos is the only item that downloads onto Shutterfly or my computer. The Apple solution is to email each individual photo (over 100 of them) to yourself & then copy them to your computer? Really? This is the Iphone 5s, isn't it supposed to have great technology? It can't even recognize the photos on my iphone are all edited? Who has time to email over 100 vacation photos to get them correct? That is beyond acceptable from Apple.

    Please read this article about how to go about transferring photos from iphone to computer.
    http://support.apple.com/kb/HT4083

  • Photo cd contains only "alias" files and I cannot find my images....

    A few months ago, I burned a few photo cds.  I created these by dragging the files from my camera's memory card to the cd folder and then burned them.  I thought I was being careful and checked each cd after it was complete to confirm the photos were all there.  At the time all looked fine.  I then erased the camera memory card to create more usable space.  Now those same cds only contain alias files and my images cannot be located in any files or folders.  Can I recover or did I make a mistake with something that used to be so simple??  Thank you for any suggestions and help with this.

    Your cd's only had aliases burned to them. When you checked the contents of a burned CD the memory card would have been still mounted, so the aliases automatically found the original files and opened them. This will only work if the memory card with the original photos is mounted.
    The correct procedure is to create a Burn Folder. (File / New Burn folder). With the memory card connected, drag the photos to the Burn folder. You can rename the folder, say Photos. When you are ready to burn, go to File menu and and you will see the option: Burn Photos to Disk.
    After the burn, you can trash the Burn folder, or reuse it.
    In fact the Burn folder also contains just aliases, but when you burn, the original items are found and burned to the CD.
    p.s. To copy the actual files (rather than aliases) from the memory card you have to hold the Option key down when you drag and drop.

  • Can we open more than one  "folder" at a time in Bridge?

    When I click on a folder icon, the images appear in the Bridge workspace. Then when I click on another, different, folder icon, the previously displayed images are gone, and only the second folder's images appear. A priori, this seems to be an unnecessary limitation on functionality, and therefore I presume that I just do not know how to do what is called for: To use the functionality of Bridge for more than the contents of only one folder at a time.
    Yes, I know that I could, using, say, Windows Explorer, create a sort of "megafolder" into which I copied the contents of several folders, but this seems to be a kludge which should not be necessary.
    Did the designers of Bridge not contemplate that users would want to operate on the contents of more than one folder at a time? I presume that I am just ignorant of how to achieve what should be a normal functionality; seeing more than the contents of just one folder at a time.
    Please alleviate my ignorance.

    Quick way: Press Ctrl+N (Cmd-N mac) to open a new Bridge window. Open the second folder there.
    Not so quick way: Select menu File => New Window. Open the second folder there.
    If you MUST view all of the files in one window, all of your files MUST be in folders nested within the same parent folder. In that case:
    1) View the parent folder in bridge.
    2) Open the Filter palette.
    3) Click the microscopic button in the top left corner of the Filter palette, which looks like a folder with a "No" symbol on it. The tooltip label for that button is, "Click to view all items...".

Maybe you are looking for

  • K9N Platinum, 4GB of RAM, XP shows 3.25GB

    I have a K9N Platinum with 4 sticks of 1024MB Corsair.  On POST it detects full 4096MB of memory.  CPU-Z also shows 4GB. However, in XP, right-click My Computer, properties, it shows 3.25GB of RAM. Now, I did some googling and the solution to this se

  • Transfering music from your ipod shuffle to your computer

    I AM STUCK!! My grandpa is so eager to make me get this done, so i would like a response sometime today. How do you transfer music from your ipod to your computer? I gave my grandpa an ipod shuffle for his birthday and we got all the songs that are n

  • Call form in new browser window

    Hello all, I am trying to call a form that will appear in a new browser window, but be part of the same forms application. I am able to call the applet by using web.show_document, however you must log on to the forms services before you can access th

  • Hide menu bar in Webgui of HTML

    Hi, Can you please let me know how to hide the menu bar in WEBGUI of HTML. I have to hide the menu bar for an ALV Report which i have created in SRM 5.0 which i am going to publish in SRM Web interface . Also please let me know after hiding menu bar

  • Failed to read USER_SDO_GEOM_METADATA view

    Hello, I'm trying to add a geometry column to an oracleXE table. commands issued are: 1) alter table specimen add (geom mdsys.sdo_geometry); 2) update specimen set geom = mdsys.sdo_geometry(2001,8307,mdsys.sdo_point_type(dec_long,dec_lat,null),null,n