Photos looked washed out when played through a TV....

I have a new G5 iPod and a 60gig Photo. When plug then into the same TV with the same cable (s-video and audio) the pictures from the G5 look washed out. The iPod Photo colours look "brilliant" and are all but identical to the original digital pictures and when shown on my iMac 20" screen.
Is this because of the video aspects of the G5 and the "corners" cut to get the unit size down (hence no fire wire).
Please advise, I feel like returning this and sticking to the Photo.
Thank in advance.
David

Got a refund today
Will wait for better resolution iPod to be released. The Photo still rox

Similar Messages

  • QTs are washed out when rendered.

    HI there
    I'm rendering out through AE (v12) and through numerous codecs - animation,H264, ApplePro, tiffs, etc.... - and all QTs look washed out when compared to the AE project. Does anyone have a solution or know the cause of this? (OSX 10.8.4 & GeForce GT650M)
    Any help appreciated.
    E

    Tiffs and Targa sequences still seem to drop less so.
    When importing the rendered QTs back into AE they appear less washed out/desaturated within the viewer than they do with the QT player. Obviously one or the other is causing the main problem, but both seem to be playing a part.

  • Icons/Folders/Thumbnails look "washed-out" in Tiger. Is there a setting?

    Hello.
    After installing Tiger I notice that the icons for the folders and the picture thumbnails look washed-out or grayed-out, not fully colorful as usual. I looked at all the Finder preferences but can find nothing to change it.
    It's not so bad for the folders on the desktop but I really need to be able to see picture thumbnails clearly.
    What setting am I not setting??
    Thanks!!

    From your description, it sounds like the "Finder" setting to display all items including those that are invisible has been enabled. In earlier versions of OS X, the behaviour was that only normally invisible items would appear "grayed out" (a useful indicator of its status), whereas normally visible items would have the regular appearance. This changed in "Tiger", where everything appears faded with that setting, something I would consider to be yet another example of the trend in erosion of usability of the OS X "Finder" that seems to accompany every revision.
    As far as I know, there is no built in GUI way to change that setting - it likely became enabled through the use of some third party utility. Such utilities are an annoyance because, while they generally do no harm, they do nothing more than set "hidden" settings that are a part of OS X. As such, the effects of the utilities may persist, even after they themselves have been completely removed from the system. Then it is left to the user to try to figure out what setting was modified, or to remember what app they may have downloaded then uninstalled months in the past.
    Your options are unfortunately limited, you presumably had chosen to display hidden files in the past for a reason - under 10.4, normally visible items will appear "washed out" when showing invisible items and I'm not aware of a way to change that. On the other hand, disabling the setting should cause visible items to appear with full opacity, but you would no longer be able to see the "invisible" items. The setting can be stored in a number of places, but for starters, to disable it, try launching "/Applications" > "Utilities" > "Terminal.app" and entering these commands:<pre>defaults delete -g AppleShowAllFiles
    defaults delete com.apple.finder AppleShowAllFiles
    osascript -e 'tell application "Finder" to quit'</pre>After entering the commands, restart the "Finder" by clicking on its "Dock" icon.

  • Possible solution to PDFs looking washed out/colors faded

    I decided it would be easier to post this as a new thread in itself than to reply to each and every thread related to this problem.
    I searched the forums to try and find a solution to images looking washed out/colours looking faded after exporting from InDesign CS3 to PDF.
    After looking through the forums I came to the conclusion that the reason the images looked faded was because I have objects with less than 100% opacity in InDesign so if you also have similar settings this may work for you also.
    When exporting from InDesign, under the Output tab I changed the Colour Conversion setting to Convert to Destination.
    Other than that I left everything else as it was.
    This solved my blacks looking washed out, particularly my fonts which had become a sort of grey/brown colour.
    However I noticed that on the pages with images after the pages that had objects with varying transparencies, they still suffered from looking washed out.
    The next step I came across purely by chance: Opening the PDF using Acrobat, under the Advanced tab I chose PDF Optimiser and noticed that the Transparency option in the sidebar hadn't been checked like the Fonts and Image options had.
    So I checked the box and set the Preset to High Resolution and clicked OK.
    It took a minute or so to Save the new file and once I opened it, the richness and contrast of the images had returned, if anything slightly over saturated but a lot better than the washed out/faded appearance of the previous document.
    Hopefully this will work for a few people out there having the same problem.

    I've actually responded a few times to others on the forums regarding images looking washed out/faded in Acrobat 8. I thought I'd pass that information to you here just in case it helps. In those cases, the images that had that appearance either had transparency applied or interacted with it in some way. However, if the file was viewed with the Output Preview dialog open (under Print Production tools) the colors appeared correctly. They would also be correct if the transparency was flattened.  As it turns out, there was a bug in Acrobat 8 that affected the onscreen display of those images that interacted with transparency or had it directly applied and the transparency was still "live" (not flattened). This was fixed in the update to 8.1. If you are running 8.0 you might want to try updating to 8.1 and see if that helps?

  • Why do my images look washed out...

    Why do my images look washed out after I have worked in Photoshop CS6 and saved them in Finder? I have been a Photoshop user for a while now and have never experienced this problem. It started 2 months ago and no one can seem to tell me why or how to fix it. I am a professional photographer and I have clients waiting on their images but I can't send them looking as horrible as they do. My workflow is: drag and drop an image from iPhoto or Finder to Photoshop. I change things like levels, contrast, image size and use the healing too. Then I save to Finder so I can upload to dropbox or to website or burn to a DVD. Now when I save the image the thumbnail looks washed out, without color and looks horrible!!! I don't know if my photo files are corrupted or ? If I open the image in Photoshop or Bridge it looks fine. I would be grateful for any suggestions or explanation. Things were working just fine, but not now.

    Examining the image direct from the camera of the child on the beach, using http://regex.info/exif.cgi  there is a small embedded thumbnail (with black bars top-and-bottom to letterbox it to the LCD aspect ratio), and a small preview probably used for zooming in on the camera LCD screen, and the fullsize jpg image all contained in the one JPG file.  All three of these seem to have identical histograms other than the black-bars causing a dark peak on the thumbnail image, but otherwise the shapes of the histograms and the position of the peaks from light to dark are the same. 
    In other words the full-size JPG and the embedded preview and thumbnail all seem the same other than size so the darkened version seen in Finder is not coming from the camera.  The one issue the above website reports is that the camera JPG has a color-profile tag (name of the profile) but does not actually contain the color profile, itself.  All other versions of the image have an actual embedded profile not just the name in a tag.  It is possible that this is confusing Finder into assuming a different profile or gamma curve for the image that sRGB warrants, but most all camera images have this issue so I wouldn't expect a Mac to show images from all cameras as too dark.
    It is a mystery to me why the Finder preview looks darker, but at least in the one side-by-side provided, it does, and is different-looking than all other representations of the image from what I can see.
    At the beginning of this thread you said you were worried the photos coming out of Photoshop were washed out and had bad colors.  From my perspective, what comes out of Photoshop looks the same as what comes out of the camera, so only Finder has it wrong.  Are you seeing the darker image anywhere else besides Finder (and perhaps iPhoto which we don't have a screenshot of)?
    Most importantly does the image you see on screen in Photoshop, while you're making adjustments, look dark like the pre-PS Finder thumbnail or does it look lighter, like the post-PS Finder thumbnail and all the images on DropBox? 
    If more than just the pre-PS Finder thumbnail is darker then you may have a monitor calibration issue that needs to be addressed, otherwise just ignore the pre-PS Finder thumbnail when evaluating if the image needs any adjustments and assume they are all ligher than the Finder image.
    BTW, I tested for a sRGB vs AdobeRGB mismatch, and if an sRGB image is assigned an Adobe profile then the colors become more intense but the whole image does not become darker so that can't explain what is happening. 

  • The sound on my iPhone 4S cuts out when playing music/podcasts.

    The sound on my iPhone 4S cuts out when playing music/podcasts.  If I unplug and replug in the headphones, the sound comes back on, but often for only 20 seconds or so before cutting out again.  Sometimes it will play for 15-20minutes before cutting out.  The track is not "paused", and appears to continue, just no sound.  I tried cleaning the headphone jack with compressed air to no avail.  I also noticed the the same phenomenon occurs when I sync my bluetooth to my car audio.  That is, it will play for a while, then the sound will cut out, even though the track is still shown to be playing.  If I reset the bluetooth, the sound comes back on.
    This started happening about a week ago, but no "event" that I can think of caused it.  I didnt' get the phone wet, forcefully drop it, or leave it in extreme heat.  I've tried doing a reset of the phone.  I also was running iOS5 when I first noticed this, and since upgraded to iOS6.  The problem appeared with both.
    Any help would be greatly appreciated.
    Thanks,
    Steve

    One thing that helped was getting a toothbrush and scrubbing the dock connector on the phone.  I scrubbed the connector and used compressed air for about 1/2 hour till the connector looked much cleaner.  An Apple employee told me that the pins on the phone had a little corrosion and sand.  The problem hasn't gone away completely, but has been significantly reduced.  I'm going to hold out until my contract expires after which time I'll switch to an iPhone5 (or newer) or Android phone.

  • My photos looked great but when I made a book they all appeared to be corrupted in the pdf preview?

    My photos looked great but when I made a book  in iphoto 09 they all appeared to be corrupted in the pdf preview? There is a white triangular shape with random  horizontal lines running through each photo in the ibook preview.  Took it to the Genius bar, after a week of fooling with it including wiping it clean and resinstalling the OS the same thing happens.

    A LOT of them dont appear.
    What do you see in the window when you click on those?  A blank, black window?  An exclamation mark?  What?

  • Typeface in pdf looks washed out/light

    When I convert a document to PDF the typeface looks washed out. Recently I was looking at a document on line and wanted to copy a paragraph. When I tried it a window came up saying that the page needed to be scanned/converted before i could copy from this document. I said "Ok". Ever since then, instead of the typeface being clear and solid, it's washed out and lighter looking. What happened, and how do I correct this problem?
    I have AA XI

    Hello,
    Yes, the iMac's monitors are very good. They are among the best in the Apple LCD line.
    But, Macs have a very distinctive difference in their video appearance. They will look less sharp when compared to a PC.
    The difference is in how the Mac displays it's video. Basically, as I understand it, this is a visual perception based on the Mac's use of Anti-Aliased screens / fonts.
    So, it does take some getting used to if you are new to Macs.
    I've gotten accustomed to it. But, there is a noticeable difference in how the Mac displays video and how the PC displays it.
    I have connected a number of PC monitors to my Macs, and the visual perception is the same as it is using a built-in Mac monitor. The PC monitor looks sharper and more defined on the PC than it does when connected to a Mac.
    The difference is in the Mac OS and how it displays or renders it's screen and fonts. So, it's not the monitor.
    Now, you can go into System Preferences (under the  menu) and then go into displays and tinker with the calibration settings and such.
    Also in System Preferences is the "Appearance" pane. You can go in there, and towards the bottom is the "Smoothing" option. You can adjust those options as well. Note that the smoothing options don't take effect until after you restart.
    So, there's a couple of places you can tinker to try and tailor it to look closer to your preferences.
    I hope this helps.
    Let us know if you have other questions.
    P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

  • My RAW files look washed out jpegs are OK

    My RAW files look washed out, in camera I introduced warm colours by setting it on cloudy and set to vivid. They look great in other programs, how do I retain the original colors?

    Buddy, the issue is that Photoshop Camera Raw / Bridge don't use the parameters you set in-camera at all.  It may seem odd that it doesn't, but that's the way it works. 
    The idea is that these software tools give you full control over literally hundreds of factors that go into your raw conversions, and trying to emulate the presets on the camera just doesn't make sense.
    You need to save new Camera Raw Defaults to deliver color you like in new exposures you haven't opened before.  Check especially the Camera Profile setting in the Camera Calibration tab in Camera Raw.  Adobe does provide some options that will get you close to what the camera does, then you can tweak the settings further.
    For what it's worth, it's not wrong to want the color to match, especially if you like the color the camera delivers.  I've created Camera Raw Defaults for my own cameras that provide a very good match between the in-camera color and what a new exposure looks like when first opened in Camera Raw...  I don't always leave it that way, though. 
    -Noel

  • Psd file wash out when add transparency to page

    HI,
    I've had a noticeable yet unknown problem, and today I figured out why, but now need help fixing it.
    Working with CS2
    When I import a grayscale psd file into ID, it gets washed out when I add a transparent element to the page. My page started out in the page Window as a solid white background, and changed to transparent when I added the transparent element next to it. At the same time, my nicely contrasted grayscale psd image (contains levels adjustment layer) became washed out and lighter. This is the first time I've actually watched it happen as I added a transparent element - probably because often transparent elements are added before my photos.(this explains the poor image quality I've had in the past - always thought it was a calibration issue on my monitor).
    So my question is, how do I get the page (icon in the pages window) to be solid white again? or at least not weaken my grayscale images?
    I had a printout before I added the transparent box, the image printed nicely. Now the image prints washed out just as on the screen. (printing using "Send All Data" for image output.
    I'm working in Doc CMYK, transparency flattener is set to Doc CMYK, turned on overprint preview, tried isolating the blending, knocking it out, re-placing the psd file, adding a solid white box behind it (a no-no, I know, but was for testing purposes) all to no avail.
    I'm sure there must be a setting somewhere, but I'm not finding it.
    I'm grateful for any help I can get!

    How are you printing? Are there any CMYK elements on the page?
    Most desktop printers are really RGB devices. You may find you get better results if you change the transparency blend space to RGB.
    Peter

  • My itunes loses the sound when playing through TV/receiver

    My itunes loses the sound when playing through TV/receiver.  It is my 2nd Apple TV,  I have a Mac and PC and I have used 2 different receivers.  Any help?  If I start the music through Apple TV is doesnt skip but then I cant have it playing through computer at the same time.  It amazes me how these littles things arent fixed yet.

    I have almost the exact same problem, except that mine is without the iTouch. My itunes is working perfectly - uploading music from CD's, searching for music, syncing with my iPod classic. However when i ask it to play any music it will say that it is playing yet not only will no sound come out but the timer bar will not move either. it is the same with music in the itunes store and happens regardless of what else is happening on my laptop.
    i know my sound works fine with all other programs, and i read on another forum that 'repairing' itunes through the control panel fixes it, however this is not the case.
    Any suggestions would be greatly appreciated.

  • Colors in FCP looks different than when playing in QT7

    The colors of the video's in FCP looks different than when playing back in QuickTime. I wonder if it can be a color management setting in FCP? I have the same problem when playing a clip in AE. I have two FCP machines, but only one of them is having this problem. Any ideas of what I can do to get the right colors back?

    Have you enabled Final Cut Studio Color Compatibility in the QT Player preferences?

  • I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question).

    I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question). I haven't had this issue before, I have always used the content library on the screen but haven't used this for about a month. How can I make the Content Library available?

    Thanks so much! I am backing up the entire computer now with an external hard drive - this should be fine right? And surely if I am backing up the whole computer these projects/videos will be backed up too? I wasn't sure how to do this any other way and I am clearly not great with tech issues. Once this is done and I am sure my projects/videos are safe I will do the delete and reinstall bit. Thanks for taking the time to help

  • My 2009 imac display looks washed out

    can anyone help me my mid 2009 imac color looks washed out take a look for your self
    if anyone knows how to fix please tell me

    Hi jono from opunake,
    Thanks for the question. Let’s take a look at your accessibility preferences to see if the Display contrast has been increased at all:
    OS X Yosemite: Display pane of Accessibility preferences
    http://support.apple.com/kb/PH18394
    - Matt M.

  • My photos looks really bad when I try to recompose for a collage?

    why my photos look really bad when I try to use a recompose tool for put in a blank layer?
    Photoshop Elements

    Look under "More like this" on the right of this page, specifically "Re: no photo selected"; the discussion there may be of help.

Maybe you are looking for