Photos move from where i place them once published

i've created my site and it's been working great for a couple months. I just added new photos to several pages and they all look fine once published except one page! have tried moving them again in iweb, saving, then publishing again, but same thing - the photos are misplaced and covering text.
any ideas?? thanks!
site is http://www.luminousadventures.com
and then on the "Reiki and Bodywork" page is the problem.
(I haven't figured out yet how to have my url forwarding go to individual pages - that's another question!)

well, I solved my problem with a very low-tech solution: since every time my photos would appear about an inch higher than where I'd placed them while in iWeb (once published), i intentionally placed them an inch lower than I wanted (had to do a bit of adjusting since I was guessing where they'd show up), but it worked!
I still don't know why this is only happening on this one page, when all the others I did the same and they are fine.
here's the results: http://www.luminousadventures.com Reiki and Bodywork page

Similar Messages

I'm out of space on my hard drive. How do I move move entire photo albums from iphoto and save them to an external drive to free up space?

I'm out of space on my hard drive. How do I move move entire photo albums from iphoto and save them to an external drive to free up space?

You do not move the albums - you move the entire iphoto library intake as a single entity
Make sure your external drive is formatted Ma OS extended (journaled) - then
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

I have a complaint about my mac book pro being slippery. Why do these expensive computers that we as consumers purchase if you set them on a couch slip off no matter where you place them on the couch?

Hi, my Mac Book Pro 15 inch lap top if i set it on the couch no matter where I place it slips off and luckily so far I have caught it before it falls onto the floor and gets ruined, of which I am super afraid of, due to what I initially paid for it as the consumer. Also, the couch is not made of slippery material at all. Also, when using it on my lap while watching tv, and multi tasking while doing my college homework, it even slides off of my lap at times. Why is it called a lap top then when it's not working as one? Are we to wear rubber pants that grip your products? Also, Why do you place on your Apple website that in one area a satin cover is available in the teal color, and then in another area it's discontinued? I believe it would be simpler if Apple would just remove the product all together from the purchasing website once any product becomes discontinued. Also, I was sitting here at home waiting for a reply about the satin cover in teal no longer being available period or that it has shipped, but yet I ended up calling Apple altogether myself and finding this all out that the only available color is the black. It would've been nice to have recieved an e-mail or a phone call on why it wasn't going to be shipped, or shipping instead of having to do customer services job and doing the leg work myself. Also, why is it that no one also even tells a consumer about the classes that were offered to a new consumer for 14 days after purchase of paying the $99.00s to learn about their macs of any kind? If I had known about such a program, I surely would've signed right up for it. Now I am being told that I can only take one clas at a time or something?!? I seriously wish I was told about this as a consumer of the Mac Book Pro 15 inch, because I would've purchased that offer right away, and now I am stuck and can no longer do it. Also I have had my computer since October of last year. So, I am in college as becoming a graphic designer within a degree of an Associates of Science and am now still struggling to learn the computer, and the programs I pruchased as well at the time of purchase, along with an Epson printer, the magic mouse, and the one year warranty. As for this all, I do believe that Apple needs to make a better bottom to the Mac Book Pro's within a much better quality for the price we pay as consumers, and all other lap tops and/or Notebooks in making them slide proof. The tiny rubber spots on the bottom of the lap tops or any Apple computer similar to mine just needs a better quality improvement to us consumers I spent good money on this purchase, I think now I deserve a rubberised protective cover for free for the slipperyness, and also since I was never told about the program for the classes of which a consumer was to pay $99.00s for, I think as a good paying quality consumer for Apple's products, I now deserve these classes for free as well.
Sincerely,
Kim

Hi shldr2thewheel,
it has been a while since we have last spoke, I would like to let you know, I am still working on getting used to the switch from windows to a Mac/Apple system. I do have a new question for you, I did purchase In Design CS5.5 through journeyed.com through Cuyahoga Community College of which I attend as a student, is there a way to purchase an online book through iTunes to learn that as well? Also, you know me, the struggling student, I would also, when and if the book can be purchased through the iTunes, would need to know if you do know of a much easier book for struggling students like myself and at a reasonable price as well for the In Design CS5.5 program. Our campus bookstore had closed early, and, so did the colleges library and our local library here where I do live, so, I cannot go to either place to purchase a book or to take out a book, plus cash funds are low at this moment as well but, I do have money left on the iTunes account to use, if it can be used. So, can it be used, the iTunes money, towards finding a low priced online book? I am in great need of assistance as I have a project due for my one course for this Tuesday, September 4, 2012.
Sincerely in need of help once again,
Kim

Back up photos, remove from iOS and having them on iCloud

My iphone and MacBook memory is running out and is mainly occupied by photos. How do I back them up at iCloud and delete them. I want to have access to them through

You may want to look into the new (Beta) iCloud Photo Library feature.
See here for details: https://www.apple.com/icloud/photos/

How do I import all my movies from iPhoto to iMovie at once?

I have years of movies in iPhoto and would like to export them to iPhoto all at once. Is there a way to search for all movies and export/import them to iMovie?

Hey there tkeale,
You can access the videos in your iPhoto library the same way you access photos, that way you don't have to go about copying the videos to the desktop from iPhoto and then importing them to iMovie and waste all that hard drive space.
iMovie (2013): Add photos and video clips from iPhoto or Aperture
Add a photo from your iPhoto or Aperture library
In the Libraries list, select your iPhoto or Aperture library.
Do any of the following:
To browse albums: Choose Albums from the pop-up menu at the top of the browser, and then scroll through the thumbnails of the photos in the selected album.
To browse events: Choose Events from the pop-up menu at the top of the browser, and then scroll through the thumbnails of the photos in the selected event.
Events only appear in your iPhoto library.
To browse faces: Choose Faces from the pop-up menu at the top of the browser, and then scroll through the thumbnails of the photos in the selected event.
To browse projects: Choose Projects from the pop-up menu at the top of the browser, and then scroll through the thumbnails of the photos in the selected project.
Projects only appear in your Aperture library.
To find a photo by its filename or keywords: Use the search field at the top of the browser.
Select the photo you want to use to see a preview in the viewer.
Do one of the following:
To insert the photo: Drag it to the timeline between clips or between a clip and a transition.
As you drag, a blue box appears in the timeline, indicating where the photo will appear in the timeline.
To replace a clip with the photo: Drag the photo on top of a clip in the timeline.
As you drag, a white border appears around the clip in the timeline. When you release the mouse button, choose Replace from the menu that appears. The photo replaces the clip in the timeline.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Chapter Markers are off from where I set them in FCP HD

I just completed editing a Hip Hop concert with 12 performers. I put chapter markers at the start of each groups performance in FCP HD. When I exported my project I included the chapter markers as well. I used the new iDVD5 to burn the DVD. I DO have DVD Studio Pro but am not effecient with that yet. Anyway, after the long encoding process and burn, I watched the DVD on my set top DVD player.
When I tested out the DVD skipping from one group to the next, it wouldn't go right to the next group! For some reason the markers were coming up 20-30 seconds before the next performance! So you would see the end of the performance you are currently watching before it switched to the next scene or in my case next group.
The Chapter Markers are placed at the very begining of the groups performance so why after I burn the DVD is it putting the markers up to 30 seconds before where I want it?
Should I try to move the markers forward about 20-30 seconds or so? This is annoying because its perfect in FCP HD but its not placing them in the right places in iDVD5. I should be able to skip to each group as if it were a scene in a movie.
Any suggestions?

All your problems are related to not having the Record Keyframes button on (A). If you create a keyframe point for your mask position and then advance a few frames in the timeline and start moving those mask positions, a new keyframe is NOT created. Instead the points for the mask shape, INCLUDING the the keyframed position are re-positioned relative to the amount you moved them.
If you are going to manually set keyframes (not at ALL recommended), then you have to set the keyframe BEFORE you make any changes to the mask.
Andy

Can't delete photo's from iPhone without deleting them from iCloud...

I own a 16GB iPhone 5, every time I try to erase a photo from my iPhone it prompts me with a warning telling me that "this photo will be deleted from iCloud Photo Library on all your devices" this warning pops up in all sections of the photo app. Please help! I am currently running iOS 8.1.3.

From the FAQ: "Deleting a photo or video from your Photos app will also remove the item from iCloud Photo Library and from your iCloud storage allocation. Photos and videos you remove can be recovered from the Recently Deleted album for 30 days. After 30 days, your content will be removed from the Recently Deleted album. Photos are backed up on our servers for up to 30 days after they're deleted from the Photos app." This is by design.
iCloud Photo Library beta FAQ - Apple Support

Hello,please how to delete movies from itunes without delete them on the iphone??

When you try to delete movies,you have no choise:they will be deleted from iphone!And I put some movies on itunes by error :/

On your iPhone go to Settings>General>iTunes wi-fi Sync, make sure that is off if you want to delete a movie in iTunes but not lose it on your device.

Is it possible to get the thumb through feature in keynote (inspector build actions thumb through) to do a loop of photos instead of just going through them once?

Need to know urgently for a seminar as there is discussion and i need continual photos flicking through and want to use Keynote for it as it looks far more professional.
Thanks for your comments and answer!

Hi, i dont know if this is exactly what you want but you can experiment with the different options.
Inspector
Build
Action
Thumb through
More Options
Then on the right side, there is the build order. The first build is assigned as Start Build-> On Click
For the second build and on you have to choose: Start Build->Automatically with build 1.
You can choose the delay you want (the interval between each move)
Hope this helps
Dimitris

BITOR, BITXOR, BITNOT - where to place them?

Currently, Oracle has only one bitwise operator - BITAND. All other bitwise operators, such as
BITOR, BITXOR, BITNAND, BITNOR, BITXNOR and BITNOT, must be derived from BITAND
and/or other (from it) consecutively derived operators.
I've created three functions for three bitwise operators : BITOR, BITXOR and BITNOT:
-- BITOR
CREATE FUNCTION "SYS"."BITOR" (x IN NUMBER, y IN NUMBER) RETURN NUMBER AS
BEGIN
RETURN (x + y - BITAND(x, y));
END;
GRANT EXECUTE ON SYS.BITOR TO PUBLIC;
CREATE PUBLIC SYNONYM "BITOR" FOR "SYS"."BITOR";
-- BITXOR
CREATE FUNCTION "SYS"."BITXOR" (x IN NUMBER, y IN NUMBER) RETURN NUMBER AS
BEGIN
RETURN (BITOR(x, y) - BITAND(x, y));
END;
GRANT EXECUTE ON SYS.BITXOR TO PUBLIC;
CREATE PUBLIC SYNONYM "BITXOR" FOR "SYS"."BITXOR";
-- BITNOT
CREATE FUNCTION "SYS"."BITNOT" (x IN NUMBER) RETURN NUMBER AS
BEGIN
RETURN (-1 - x);
END;
GRANT EXECUTE ON SYS.BITNOT TO PUBLIC;
CREATE PUBLIC SYNONYM "BITNOT" FOR "SYS"."BITNOT";The functions are created in SYS schema and works well. My question is:
whenever a system-wide accessible function (a function available to all users just like
any other Oracle's built-in function) is to be created, what is appropriate place to
create it? Is it SYS, SYSTEM or SYSAUX schema?
Also, if anyone has a better coding solution for these functions (operators), please let
me know.
Thanks a lot.
Albert

oracle's long standing recommendation is that you do
not put anything in any of the supplied oracle
accounts (sys, system, sysaux). putting something
there could affect later patches or upgrades -
perhaps oracle will choose to create it's own object
which the same name as the one you made, and either
the upgrade fails, or you lose your objects.Yes, that's it. Understood. Thanks.
Albert

Why is this photo not staying where I place it?

I have a photo basically of a wood frame that I want to put around a youtube video. It works on all browsers except chrome. check it out
http://logrenew.com/pictures-and-videos.html
Does anyone know why this is happening?

Because the text frame containing "Here at Mickel Log Home Services, we take videos to give you a visual experience of we we do here." line breaks differently in different browsers. It's three lines in Firefox and probably in Muse and 2 lines in Chrome. Since every browser has it's own text layout engine, these sorts of differences are unavoidable.
However, you can plan ahead for these variations by being very aware of text frame heights in Design view.
If a text frame is exactly the height of the text in Muse Design view, then if line breaks change in the browser and the text frame need to be taller, it will grow and shift things below it down. In your layout because of how the picture frames are done versus the videos this results in the videos being pushed down but not the frames.
The easiest fix is to simply make the text frame one line taller than the amount of text displayed in Muse Design view. This will reserve enough exra space for the text frame that if/when it line breaks to be one line longer in the browser it will still fit in the designed height and nothing below will be moved.

If my native method depends on other dll, how and where should place them?

I write a native method called A, and A needs to call some funciton in b.dll, c.dll,
then I generate the dll for A, and load in the java code, but how should I deal with b and c.dll
thanks

according to what you say, i just need to put the dlls which the native method depend on to the you mentioned location,right?
I tried but failed.
can you give me more idea?

How can I upload my iPhoto photos to facebook, and not have them automatically publish?

I know how to share my iPhoto photos to Facebook, but it used to be that when I logged on to Facebook, I had to approve the photos being published, and had the opportunity to edit the album and then publish it. How I do this again, and not have it automatically publish?

Question to ask of Facebook.

Best way to Remove movies from iphoto to freeup space ?

I would like to remove all the movies from iphoto and place them in a folder for later processing in imovie ...i would like to free up all the space
any suggestions

Really easy:
Find all the movies in your iPhoto Library. Then Export them to a Folder. Then delete them from iPhoto.
What makes this easy is that every movie is automatically keyworded when you import it.
So to find all the Movies:
File -> New Smart Album
Keyword -> is -> Movie
Now that you've found them. Select All and
File -> Export *_Kind: Original_* (Note: setting the Kind: to Original is vital)
And export them.
Then trash them from iPhoto.
Regards
TD

Possible play iTunes movies from USB flash drive in iTunes on public PCs?

Posting on behalf of a friend who wants to play movies purhased in iTunes from a USB flash drive (thumbdrive) on pulic compuers (Win XP) with iTunses installed on them. Again: he wants to play movies puchased in iTunes on computers other than his own and he wants to be able to play them from the USB drive. Is this possible and, if so, how would one go about doing it?
Many thanks,

Start itunes on the public PC, and immediately go into itunes preferences > Advanced.
Make sure the setting for "Copy files to itunes when adding to library" is unchecked.
Then add the file to itunes like any other file (either through the itunes menus or windows drag & drop).
The file will stay on the USB, but it will be listed in itunes so it can be played.
When finished watching the movie, it would be a courtesy to others on that public PC to remove the movie from the itunes library. Once the USB is unplugged, itunes will give a "original file can't be located" message to anyone else. This is assuming everyone uses the same windows login.
I've never heard of public PCs having itunes installed. Just curious, where is this at? A library? Workplace?

Photos move from where i place them once published

Similar Messages

Maybe you are looking for