Photos not appearing after iCloud restore

My previous iPad 2 was fully backed up on iCloud. It failed and was replaced by Apple for a new one. I did an iCloud restore, which seemed like no problem, and no pictures showing up on new iPad. Message that it was downloading X # of photos, but nothing. Tried a restore on another spare iPod, and this time, no photos and no message about the # of photos. Repeated both 2 or 3 times. Same thing as before on each one. Any ideas?

A response I put together from another post. Also going into iTunes and choosing to sync phone to iCloud then back "this computer" sometimes works.
First thing.. Stop where you are. Don't try to sync, update, hard reset, iCloud... Just stop.
Check on your phone under 'SETTINGS' 'GENERAL' USAGE'. It should show some value for PHOTOSTREAM. Also, connect to iTunes and you will notice at the bottom of your phones summary page that there is a large amount of 'OTHER' data.
I used third party software called iExplorer (formerly iPhone explorer). In this program you select 'MEDIA FOLDER', then 'DCIM'. In the various apple folders (IE: 101APPLE) you should be able to preview your photos and copy them to your desktop.
From there sync them back to your device through iTunes or whatever method you use.
There is a simpler solution I'm sure, which may involve using iExplorer to delete some .plist files then restart the phone and let it rebuild. I'm going to try it myself AFTER I've finished copying all the photos to my MAC
Hope this helps.

Similar Messages

My Photo is missing after iCloud restore

Before I restore my iPhone i see all of my photo is keep in my Photo steam but after i restore my phone with iCloud.My photo is missing
Thank you

I already turn on iCloud backup. Some photos are restored but some of my photos are still missing.
Thank you randers4.

Why do my photos not appear in icloud?

None of my photos appear in my icloud. When I open up the icloud on my PC, there isn't even a menu choice for photos. I have the Photos option selected on both my iPhone and iPad, but the photos never upload to iCloud. I am connected to WiFi as well.

Hi Vwgirl18,
It sounds like there should be an option to enable Photo Stream on your PC.
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/HT4486
PC:
Open the iCloud Control Panel for Windows and select the checkbox for Photos (or Photo Stream in iCloud Control Panel 2.x).
Click the Options button and make sure that My Photo Stream is on and adjust the settings.
Click Apply when you're done.
Further down it discusses how to view them:
How do I view My Photo Stream?
PC using Windows 8.1: From the Start screen, click the down arrow in the lower-left corner, then click the iCloud Photos app.
PC using Windows 8: From the Start screen, select iCloud Photos (or Photo Stream in iCloud Control Panel 2.0 to 2.12).
PC using Windows 7: Click the Windows Start button, then click Pictures. Click iCloud Photos or Photo Stream under the Favorites menu in the panel on the left. Double-click My Photo Stream to view your photos.
Take care,
Nubz

Mail not working after icloud restore to new handset

Hi all.I have a new iPhone 5 handset replaced under warrenty with full icloud restore to the new handset.All is well except my mail wont work and is saying my password is incorrect. I have gone into settings and everything is as normal but i keep getting this pop up saying password is incorrect.Would anyone know of why this is happening.Many thanks in advance

If this is your iCloud email account, go to Settings>iCloud, turn Mail off, then turn it on again.
If it's a different email account, delete the account and recreate it again.

IBooks not downloading after iCloud restore

After installing iOS 6 on my 3rd generation iPad and restoring from iCloud, about a third of my books in ibooks are stuck in the downloading state. They have an empty progress bar across the bottom, and in the Purchases page in the iBookstore they all show up as "Downloading." I'm unable to select them and delete them.
I've tried deleting ibooks and restarting. When I reinstall ibooks, the same problems are there. Is there anyway to force ibooks to delete everything?
Thanks!

I'm having the same problem. I have the little black progress bars underneath my books but they never fill up with blue. They just sit there indefinitely. I've tried killing iBooks and restarting it but that hasn't helped. I'd rather not delete the iBooks app though because I have other ePub documents and PDF documents that I don't want to risk losing.

HT5824 photos taken on my Iphone are not appearing in ICloud/IPhoto. ( to my knowledge, the settings are set for "share/upload"

Photos taken on my Iphone do not appear in ICloud. I've checked the settings but am unable to determine
what, if anything, I need to do inorder to syn the photos.
Technically, I need to review the settings on my Iphone and ICloud that will enable a seamless transfer of photos.
Additionally, I need to review the computer (microsoft)setting that enable a sync of photos with ICloud.

Everything is fine, because there is no web application for photos at the moment. These are the options to view your Photo Stream:
-On your iPhone, iPad or iPod touch, your photos will appear in the Photos app in the Photo Stream album.
-On your Mac, they appear in the Photo Stream view in iPhoto or Aperture.
-On a PC, your photos download to the Photo Stream download folder. By default, this folder is located at C:\Users\Apple\Pictures\Photo Stream\My Photo Stream. You can change this location by visiting Photo Stream Options in the iCloud Control Panel for Windows.
-On Apple TV, your photos will appear in the Photo Stream view under Internet in the main Apple TV menu after you sign in with your iCloud account.

Using ios8.1 on iphone 6. icloud is enabled. when I add a contact on the phone it does not appear in icloud contacts even after backup. Pl help

using ios 8.1 on iphone 6. when I add a contact on the phone it does not appear in icloud contacts even after backup. pl resolve

Hello feroziem,
The article linked below can help get iCloud and your iPhone to synchronize your contacts.
Get help using iCloud Contacts
http://support.apple.com/en-us/TS3998
Cheers,
Allen

HT1386 My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?

Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my Ipad (Settings, General, iTunes Wifi Sinc) shows a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???

Hi Skydiver119, and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me.

E-Rec Reference Code in the Publication tab should not appear after enddate

hi,
There is a requirement from the client after the end date of the publication ,the reference code should not be displayed to the candidate in the Candidate page ,presently the same is manually done in the system by changing the status to withdrawn.
Is there any way by which we can automate the process by change in customising by which the reference code does not appear after the end date
Please provide a solution if something can be done in the standard setting or do we require any Zworkflow to be developed for the same.
Regards
RK

Hi RK,
this is nothing the standard supports.
But I would not use a workflow here. As this is a mass handling workflow is no good idea. This is a task for a customer periodical service. Just build a class implementing the periodical service interface which gets all released publications which have a publication end in the past and status released and change their status using the cl_hrrcf_posting_inst_bl. This should be done in a couple of hours. Add the customizing and the issue is solved.
A requirement in this context where a customer workflow is quite handy in my opinion is a customer workflow which closes all postings and withdraws released publications when you close the requisition. This reduces the steps a recruiter has to do and ensures that no candidate applies although you are already done with the requisition.
Kind Regards
Roman

Why MLB.TV is not appearing after the last update?

why MLB.TV is not appearing after the last update?

Make sure the store is set to the US.. Also restart the ATV.

Why new contacts are not appearing after some time?

I Am using iPhone6, iPad New and iPad mini. The contacts which I saved in iPhone are not appearing after some time. I don't know whether it is related with synchronisation of other devices. Please help me if you know the reason.

Hi,
Have you checked the filtering option in contacts? Open contact menu button > filter. Perhaps you have a filter hiding the contacts.
What are your thoughts about this forum? Let us know by doing this short survey.

The Facebook video chat icon is not appear after upgrading to mavericks X

The Facebook video chat icon is not appear after upgrading to mavericks X. Please help.

http://support.apple.com/kb/ht5404
Scroll down to the bottom, read and then perform the troubleshooting steps provided.

CRT results are not appearing after successful payroll run

CRT results are not appearing after successful run of US payroll, however, RT results are appearing.
Please suggest ideas to find the results of CRT.

Hi Rémi Corriveau,
Thank you for spending your time to answer my question.
Here are the answers to your questions . . . .
QUESTION: Did you run a Payroll Simulation or a live Payroll Calculation ?
ANSWER: We did a LIVE payroll run for a period of 3 months.
QUESTION: Did you use t-code pc_payresults ?
ANSWER: Yes, we used the t-code pc_payresults but still it doesn't show the CRT results.
QUESTION: Did you check Processing Class 30 and 70 for your WTs ?
ANSWER: As per the process, we copied the SAP standard (model) Wage Type M010 to
our customized Wage Type, hence, hope that it wouldn't disturb any of the standard SAP settings.
However, we did check the Processing Class 30, but did not check the processing class 70.
Shall update you once PC 70 is also checked.
Please educate, if there are any particular specifications that need to be entered while checking
for our WTs in PC 30 & PC 70.

Simple floating clock does not appear after shut down

Hi,
On my iMac oxs 10.9.4. my simple floating clock does not appear after shut down.
Can anybody tell me how to overcome this?
Cheers

And now I am at the stage it wont automatically start despite it being ticked in the Log In Items.
As Imp68 has asked, do you mean the "Hide" Checkbox is selected?
If you have checked the box, that says, to start the application, however, hide it so it is not visible when you start.
If you run Applications -> Utilities -> Activity Monitor, can you find Simple Floating Clock as a running app? (Activity Monitor has a Search box to make this easier).
Is Simple Floating Clock on your Menu bar?
Is Simple Floating Clock set to float?

Why when any one call me photo not appear on full screen

Why when any one call me photo not appear on full screen

Because Apple changed the way the caller's photo is displayed in iOS 7.1.

Photos not appearing after iCloud restore

Similar Messages

Maybe you are looking for