Photos not as good quality and out of focus since downloading ios 7

Does anyone else think the camera doesn't focus as good and pictures are blurred since downloading ios 7?

You are not alone with this problem
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Try deleing all music and resyncing
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings      
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:                                 
iOS: How to back up                                                                
- Restore to factory settings/new iOS device.             

Similar Messages

  • Hey! Can any one recommend a good quality and user friendly external hard drive?

    Hey! Can any one recommend a good quality and user friendly external hard drive?

    Most reliable/highly recommended are those from Other World Computing (OWC):
    http://eshop.macsales.com/

  • In and Out of focus video. Please help!!!

    I exported my fce movie to a quicktime movie (which looked fine on the computer) and then imported to idvd ( which stilled looked fine on my computer) and burned it to a dvd to play on TV and then the video goes in and out of focus when the Lacrosse players move. Why does this happen??

    Hi - my notes on this - might be of help
    *FCE/P to iDVD*
    Several things
    • How to go from FCE/P to iDVD
    • Free space on Start-up hard disk
    • Encoding
    • Brand and type of DVDs used
    • Burn speed set
    • iDVD BUG
    • Chapters
    *How to go from FCE/P to iDVD I do*
    • Disable Screen and Energy saver
    • IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mixdown
    • Save out as a QuickTime .mov file
    • Select with Mark - Chapter Mark
    • Not self-contained (not important but saves time and space)
    • NO QUICKTIME CONVERSION (IMPORTANT)
    *Free space on Start-up hard disk*
    I set a minimum of 25GB (for Mac OS and iDVDs temp files)
    Encoding
    • I use Pro Quality encoding
    *Brand and type of DVDs used*
    • I use Verbatim
    • I use DVD-R
    *Burn speed set*
    • I set down this to x4 (or x1)
    *iDVD BUG*
    • One can not go back to movie-project for any alterations and then go back to
    the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
    of them will work.
    Medicine - Start a brand new iDVD project.
    *Use of Chapters*
    • I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
    • NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it stlf
    • No Chapter marks in or within two seconds from a transition
    (Way around this last one - Export movie as QT full quality and NO Chapter marks
    Import this into a new Movie-project and now You are free to set C-Ms where You want
    them except at very beginning - still)
    *Material used to build movie*
    • video - I use streamingDV (or convert all other to this eg .mp4, .avi, .wmv etc)
    • audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
    • photos - I use .jpg - no .bmp etc
    Trash iDVD pref file and run Repair Permissions - and have a re-try.
    from post ??
    May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screensaving
    Yours Bengt W

  • Final output of Final Cut Express HD 3.5 is blurry and out of focus.

    Using clear/sharp '.mov' files as clips. Doing simple editing, nothing fancy. When I finally output the project using 'Export/Using QuickTime Conversion,' the final is blurry and out of focus. I've tried every compression type (H264, Animation, etc.). Same problem. Anyone know why this is happening?
    Although the specs for my computer are well within the Final Cut Express guidelines (I've even upgraded my graphics card to a Radeon 9800 Pro 256 MB), I'm still thinking that perhaps the G4 I'm using doesn't have enough juice to run the FCE software. By the way, I don't have any other programs active when using FCE. Any help on this would be greatly appreciated. Thanks.
    G4 (Mirror Drive Doors)/1.25 GHz/2.0 GB Memory/Radeon 9800XT (256 MB) Mac OS X (10.4.9) 2 Internal 120 GB Hard Drives (RAID)/2 CD-DVD Drives: Super Drive & Combo Drive
    G4 (Mirror Drive Doors)/1.25 GHz/2.0 GB Memory/Radeon 9800XT (256 MB)   Mac OS X (10.4.9)   2 Internal 120 GB Hard Drives (RAID)/2 CD-DVD Drives: Super Drive & Combo Drive

    Thanks for your response.
    Here's what I'm (trying) to do:
    I'm creating short 5 minute tutorial movies that will be distributed as QuickTime movies (burned to disk) for short run distribution (college).
    Here's the process: the movie itself is a recording of monitor screen actions recorded (audio and video) using Snapz Pro movie mode. The recorded size is 800 x 600. There might be 5 such 1 or 2 minute clips. The quality is excellent. I bring them in to FCE, drop all the clips on the same track, and add simple transitions. That's it.
    Now I need to somehow get a final QuickTime movie, with close to the same quality I had in the clips.
    So... I take the FCE file, output it using 'Export>QuickTime Conversion,' using the same size I originally recorded in, 800 x 600. Tried every codec available. Every time, the end result is a very blurred version of the original Snapz Pro recordings.
    I've even tried outputting the FCE file as 'Export>QuickTime Move' (not using the conversion method). Opened that up in QuickTime Pro with the same result: blurred and out of focus.
    I'm viewing the exported file in QuickTime Pro, with the 'Movie Properties' setting of 'High Quality.'
    Any clue? This is driving me crazy. But I'm determined to get this right.
    G4 (Mirror Drive Doors)/1.25 GHz/2.0 GB Memory/Radeon 9800XT (256 MB) Mac OS X (10.4.9) 2 Internal 120 GB Hard Drives (RAID)/2 CD-DVD Drives: Super Drive & Combo Drive

  • Every video produced by Premier Elements 11 is blury and out of focus.

    When I try to create a video with Premier Elements 11 and an MTS file from my video camera, the resulting videos are blurred and out of focus. The MTS is clear and looks good. Plays on any supported video player. Have tried to convert to AVI as well as creating DVD with the same results. This is the case with any input file, not only one. How can I get a focused, clear video?

    scarboro98
    The answers are in the details.
    What computer operating system is your Premiere Elements 11 running on?
    What are the properties of these .mts source files
    Video compression
    Audio compression
    Frame size
    Frame rate
    Interlaced or Progressive
    File extension
    Pixel Aspect ratio
    What is the brand/model/setting of the camera recording the source media?
    What are you or the project setting as the project preset (which should match the properties of the source media)
    See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size, Pixel Aspect Ratio (even if they appear to be grayed out)
    When you are viewing the Timeline content in the Edit area monitor is the playback blurry and out of focus?
    Or is the blurry and out of focus only in your exports? If only in exports, then we need to dig into your export choices in Publish+Share/.
    Is your computer optimized and is your video card/graphics card driver up to date according to the web site of the manufacturer of your video card?
    Let us start here and then decide what next.
    Any questions or need clarification on anything written, please do not hesitate to ask.
    Thank you.
    ATR

  • IMac Display stretched and out of focus

    My iMac display is not right. It is slightly enlarged and out of focus. I have already tried the display settings and holding the control key and scrolling down. I also tried restarting. Nothing is working. Last night I tried configuring my router for wireless. I supposedly made it secure with a password, which I had to use to connect to my network. The screen thing happened after that. This morning I checked the connection again and the little lock icon was no longer there. Could the two be related? Please help! I am obviously not very apt with computers, but I'm trying.

    This resolved my issues:
    Preferrences >  Accessibility > Zoom 
    then, uncheck Zoom and uncheck Zoom follows keboard focus. 
    Wait a few minutes.  You can rechec them again but it won't go back to the stretched and out of focus look.  I don't know why.

  • Why is text become blurry and out of focus?

    Why is text become blurry and out of focus?

    I am confused what device you are talking about. You question is here in the Using iPhone section, but it is marked for your MacBook Pro running iOS 6? If you are talking about an iPhone and you never update your profile to say you are running iOS 7, I would blame the paralax feature that slightly zooms into your picture, making certain low-res photos look extra blurry. Hope this helps.

  • TS4436 hi, when zooming in to capture still images, the image is really blurred and out of focus. is this a hardware issue and is there any solution for this?? or is my device faulty?

    hi, when zooming in to capture still images, the image is really blurred and out of focus. is this a hardware issue and is there any solution for this?? or is my device faulty?

    If you are using the iPhone camera zoom then remember that this is a digital zoom not an optical zoom. The zoomed in area will have fewer pixels and not appear as clear. The more you zoom the worse it gets. It's like cropping a picture after it has been taken.

  • In and out of focus

    I downloaded from Canon HV30 (tape) to iMovie '09. Every 20 seconds or so the picture goes in and out of focus and then back to sharp again. It is a very "soft" focus change but annoying. This continues after editing and sharing to iDVD and burning.
    Could this be a problem with the camera tape not being tight, or could it be something in iMovie?

    Tape tension has nothing to do with it.
    This is a digital camera: if the tape lost tension you'd have no image at all, or a "mosaic" or "blocky" image because of missing chunks of data.
    The focus isn't related to the tape at all. It's like moments of blurry eyesight aren't caused by lack of grip on the floor of your shoes!
    It's the camera "hunting" for focus, as explained by AppleMan and Karsten. You may not see this on the camera's own built-in viewfinder monitor ..but that really is the cause.
    The tape's tension, or contact with the tape-head, is not it. If there were poor contact you'd have sporadic loss of both sound and picture ..but not a change of focus.

  • My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one?

    My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one? Someone help please.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    If the iPod is defective and not abused Apple will exchange your iPod for a refurbished one at no cost

  • When using video camera on iPad 3 screen keeps going in and out of focus

    Every time I use my video camera the image goes in and out of focus making the blurry there seems to be no settings to stop this help.

    At this point, I would go for reset to its factory default condition, using the iTunes program to get a clean system install. That way you'll clean everything out and just have it set up the way it would come from the factory. You'll need to do your backup (on the iTunes program too) and be sure you understand which stuff will be saved and which will not (from the links below). Also turn off any anti-virus program you may have on your desktop. Then when you reset it to the factory default condition, don't restore your backup just yet ... until you check it out without your data put back on it. Verify its operation first, to make sure that you know it's okay. Hopefully everything is okay at that point, otherwise you'll have to take it into Apple to check it out for any hardware failure.
    Here are the links, and the last one pertains to the reset to factory default condition ...
    Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)https://support.apple.com/kb/HT5262
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
    http://support.apple.com/kb/ht4946
    iOS: Troubleshooting Encrypted Backups
    http://support.apple.com/kb/TS5162
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414

  • Display suddenly changed I have tried changing in utilities but nothing works.  The print is enormous and out of focus the screen has shrunk in width but programs open too stretched in length? What can I do?

    The display suddently changed two days ago.  Everthing exploded in size.  I have tried changing the contrast but nothing works.  The display screen becomes either too wide, too long, or too narrow and in all cases the font is extra large and out of focus.  What can I do please   I am really disappointed since my iMac is only 2.5 months old.

    Don't think so.  But tried it anyway.  I have been into utilities and tried different contrast settings now I don't know what is the right one.  But no matter which one I tried I have either about a third of the screen black, with display centered as though hidden behind the black.  What is going on?
    Also, I have to say that I can't understand why there is no information anywhere on what the correct settings should be.
    Any ideas Capt?

  • Since downloading iOS 8 on my iPad 2 it has stopped working and will not connect to iTunes

    Since downloading iOS 8 on my iPad 2 it has stopped working and will not connect to iTunes to do a restore.  I have tried to do a reset using the sleep button and home key and all I get is a white band across the screen and then it boots into the main system but it is just a series of white lines going across the screen, how can I do a restore on this?

    Hey dbwithers,
    Thanks for the question. I understand that you are experiencing issues with your iPad after attempting to update to iOS 8. To isolate these issues, let’s try placing your iPad in recovery mode and attempting a restore with iTunes:
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • TS1368 I could not connect to iTunes and App Store after I downloaded ios6 in ipad2

    I could not connect to iTunes and App Store after I downloaded ios6 in ipad2

    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • HT4528 my iphone 4 just turned off and the screen is black and it wont turn on . its in perfectly good condtion and ive had it since april , help please?

    my iphone 4 just turned off and the screen is black and it wont turn on . its in perfectly good condtion and ive had it since april , help please?

    I've tried that. It doesn't work. The only thing that happens is the apple comes up. I've tried holding the home as I'm plugging it in and keeping it held for a few minutes, but nothing happens. My iTunes doesn't even read that it's connected.

Maybe you are looking for