Photos not showing after migrating from iPhoto to Photos.

I just upgraded to OS X 10.10.3 and the Photos App, however when I started to migrate my iPhoto libraries (have nine(9) libraries) no pictures show up on the third one I migrated. I checked and the migrated library file has been created (11.3 GB) however nothing shows up when I select the file and open this library. Any suggestions by anyone would be appreciated.

Try these for the first attempt:
First be sure to have a backup copy of the library if you already don't have one.
OT

Similar Messages

Missing photos after migration from iPhoto to Photos

Last week I upgraded my desktop MacPro from OS 10.9.latest to OS 10.10.3. When I first opened Photos, it did the migration from iPhotos without apparent problem. But I have noticed that many (hundreds at least) of the photos from my pre-migration iPhoto library are now not in Photos. I mounted my pre-upgrade backup drive on a laptop running OS 10.9.latest, and can find specific missing photos OK on the backup. But if I search the main drive on my desktop Mac, for example for "P1440608", I get no results. I have tried rebuilding the Photos library with no change - the missing photos are still missing.
One option is to erase my MacPro main drive and restore from the backup drive to OS 10.9.latest. This should put me back to where I was. Is there a viable alternative? Please note that my iPhoto version was 8.1.2. It will not open in OS 10.10.3, and the App Store will not let me upgrade to the most recent version. I do have Time Machine plus external bootable (SuperDuper) backup of the desktop MacPro, plus that laptop running OS 10.9.latest as resources available.

Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Photos disappeared after migrating from iPhoto to Photos

I just upgraded to OS X 10.10.3 and the Photos App, however when I started to migrate my iPhoto libraries (have nine(9) libraries) no pictures show up on the third one I migrated. I checked and the migrated library file has been created (11.3 GB) however nothing shows up when I select the library file and open it.
Any suggestions by anyone would be appreciated.
iMac (24-inch Early 2008), OS X Yosemite (10.10.3)

Delete the migrated version, repair the Library with iPhoto and try again.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

HT201386 migrating from IPhoto to Photos

Since I accepted migrating from IPhoto to Photos, both applications gave up working and the quit as soon as I open them. Could you olease help me? Thank you!

You were asked to sign a non-disclosure agreement when signing up for the beta program:
CUSTOMER SEED AND CONFIDENTIALITY AGREEMENT
OSX Beta Program FAQs>
The NDA prohibits you from discussing software beta issues here or anywhere else. The two documents above describe how to submit problem reports to Apple.

I don't see my images on Photo after migration from iPhoto

i recently purchased an iMac, which uses Photo, and don't see my photos after migration from an older mac which has iPhoto. I see the event folders and the photo count but there's no actual image! Help.

Is it here?
http://www.imore.com/yes-camera-roll-gone-ios-8-heres-where-it-went-and-why

Hotkey (Ctrl+B) is not working after migration from Forms 6i to 10g

Dear Gurus,
Need your help regarding the following problem:
After migrating from Forms 6i to 10g (Rel 2), Ctrl+B (used to list the blocks in a form) hotkey is not working anymore (all other hotkeys are working fine). I've checked my FMRWEB.RES and it contains an entry for Ctrl+B:
66 : 2 : "Ctrl+B" : 70 : "Block Menu"
Additional Information:
OS: AIX
NLS_LANG = UTF8
fmrweb_utf8.res also contains the same text for Ctrl+B as above.
I tried to reproduce it on my Windows Machine (with NLS_LANG set to AMERICAN_AMERICA.WE8ISO8859P1) and its not working as well. I don't have right to put move files on AIX server but i can try anything (on my local system) suggested by the Oracle gurus.
Best Regards,

Dear Gerd,
"are you sure, that it is the hotkey"
Yes, i am dead sure. Since:
(1) It was working fine in forms 6i
(2) If you run a form and select Help => Keys, you will see Ctrl+B on the top of list
The problem is its not taking into account the keys which i am defining in the file (although i am following the same procedure detailed on metalink.oracle.com).
Regards

.Photos shows no photos after migration from iPhotos Library.

I migrated an iPhotos Library to Photos Library. Both files are around 409GB. If I open the file packages I can see the photos. However Photos opens an shows nothing. And iPhotos is now useless so I can not get to pictures!
And I have already tried the repair process a few times.
Thanks

Hi cwsummers,
I understand that your current iPhoto Library and the photos therein are not being shown in the new Photos app. Here is an article that will help you choose this library file for you to use:
Designate a System Photo Library in Photos - Apple Support
https://support.apple.com/en-us/HT204414
Thanks for using the Apple Support Communities. Have a good one!
-Braden

HT204655 How to have a unified Photos Library after migrated from iPhoto and Aperture?

The "HT204655: Get started with Photos for OS X" do not help. If you have previously used iPhoto and Aperture, when you "migrate" the iPhoto, then follow the steps to "migrate" the Aperture library, you end up with 5 files in your Pictures folder: Photos Library (from iPhoto), Photos Library 2(from Aperture), iPhoto Library (Not sure if can be deleted or not - of course no), Aperture Library (for some reason blank), Aperture Library 2 (Created by Photos?).
So, looks like a mess and no easy way to make a clean migration.
I've a hope that exists a solution to have a single Photos Library with the merged iPhoto and Aperture contents, like a real migration.
If I export everything (From iPhoto and Aperture) then import in the Photos in a single Library should work, but will lose all the organization, faces, etc...

You could merge libraries with iPhoto Library Manager, but I never tried this for merging Aperture 3 libraries with iPhoto 8.
Are you planning to keep all your photos in iCloud? Then consider to merge them in iCloud, but it will take a long time.
Are you using iCloud Photo Library (Beta) and have enough iCloud storage for the merged library?
Wait, till your current Photos Library has been completely uploaded to iCloud.
Then quit Photos, and launch it again, while holding down the alt/options key. Select the old iPhoto lIbrary.
When the upgrade of the old library has been finished, make this library the System Photos library (in the Photos Preferences > General).
Enable again iCloud Photo Library (Beta) in the Photos > iCloud preferences.
Now Photos will upload the new library to iCloud as well and create a merged library in iCloud. After this merged library synced with your Mac, you will have a merged Photos library.

I Photo will not update after migrating from old I-Mac to new I-Mac with fusion drive

I just migrated from 2009 I-Mac with Mountain Lion to New I-Mac with Mountain Lion with migration Assistant. Now... I tunes will not update although Apple says one is available

a couple of things - you should not "migrate" applications - you should use the new ones that come preinstalled - what version of of iPhoto do you have on your new mac?
Migration assistance does not handle the iPhoto library well sometimes - the best way is to drag the bad iphoto library from the pictures folder on the new system to the desktop, connect the two systems together (network, firewire target mode, etc) and drag the iPhoto library intact as a single entity from the old system to the pictures folder of the new system and launch iPhoto on the new system - it will open and convert the iPhoto library as necessary and you will be fine - once you test the iPhoto library you can delete the one on the desktop
LN

Migrating from iphoto to photos - missing years of pictures

Updated to Photos application yesterday..... When I opened it, I noticed all photos from 2000 - 2010 were GONE!!!! The previews still showed in the Photos app, but the original master was not in the library any more so I could not export the photos or email them.
Subsequently did a time machine reset, but since time capsule is only 1TB apparently overnight a new backup of my photo library had been done (50.000 pictures) and time machine was forced to purge the old library. So, the backup was useless. By going back in time machine I also lost the previews that Photos had cached, so now literally thousands of photos are forever lost....
Very, very, very disappointed.

Creating a Photos library should not have damaged the iPhoto library. All those photos should still be in the iPhoto library (assuming managed files, the usual case). Launching iPhoto should work (after an initial warning) and show them all.
Also, if backing up your photo library (either one) causes Time Machine to flush the previous version immediately or even overnight, your Time Machine volume is not large enough. The sizing guideline for the Time Machine volume (either a Time Capsule or a regular external drive) is usually quoted somewhere around three; that is, the Time Machine volume should be three times as large as the used space on the volume(s) being backed up at a normal level of update activity. A higher ratio allows more look-back at a given activity level or more activity with the same look-back period.

How do I continue a migration from iPhoto to Photos that was interrupted part way through?

I began a VERY large migration (40k+ photos) from iPhoto (v9.6.1) to Photos on an external hard drive. I have a MacBook Pro with Yosemite 10.10.3 that is connected to a network that has a Synology network drive. The iPhoto library is on that drive and I was wanting to create the Photos library also on the drive.
The process was very slow and has taken days, but that is expected and it was definitely making progress (I could see the files being added over time). Unfortunately, the transfer was interrupted part way through (my kid closed my laptop, which disconnected it from the network). I tried to start it over with the partially created Photos library folder as the destination, hoping that it would pick up where it left off. It worked until it reached the same files that were previously created. The migration stopped at that point, and the following error appeared: "Photos was unable to make a copy of your library before preparing it. There were file system or hardware issues…” I assume the inability to overwrite previous files with the same names was the case of the "file system or hardware issues."
Is there any way to either continue the migration from where I left off, or maybe even manually move the rest of the files over? Or do I have to wipe out the entire partially migrated Photos library and start over?

You probably will have to start over
And I suspect that you are incorrect - as far as I know NO NAS is formatted Mac OS extended - A NAS is basically a Linux computer with no display or keyboard that uses a Linux format drive - a headless computer
Unless you have a directly connected drive correctly formatted you are cgoing to continue to have issues - your photos and your choice what risk you put them at but you are treading in very dangerous water with you set up - is it documented not to work and similar set ups have been reported here hundreds of times as causing major problems and losing lots of stuff
LN

Contact list not show after migration Exchange 2007 to 2010

Hello.
I have a old infraestructure with exchange 2007 and new organizacion with exchnage 2010
If I migrate a mailbox from 2007 to 2010 I can open the mailbox on 2010 without problems,
From owa works correct active sync and outlook work correct, I can send a receive mails but, from outlook client I can not see the Global Address list.
Step by step:
User with mailbox over exchange 2007.
Outlook, owa active sync.. all is working fine and I can see the Global Addres list from owa and from outlook.
Move mailbox from 2007 to 2010
Completed ok without errors
The user mailbox on 2010 working fine, I can access by owa by outlook and active sync and from owa I can see the Global Addres list but from outlook I can not see the GAL.
I've tried diferents outlook versions: 2003 2007 and 2010 but I can not see the GAL
If I try to download de GAL from Outlook I see outlook download the correct list and complete ok without erros but not show on outlook.
I don't know why..
Exchange 2007 with sp3 and 2010 with sp3 too.
Any idea how could resolve this problem?
Thanks in advance¡

Hi
Did you migrate your address list or create a new one? Move-OfflineAddressBook "Default Offline Address Book" -Server <your Exchange 2010 server>
Get-OfflineAddressBook | fl *server*
Set-OfflineAddressBook "\Default Offline Address Book" -VirtualDirectories "your exchange server\OAB (Default Web Site)"

Some items of selection-screen not showing after migration to QA

Hi Folks,
I'm trying to help a colleague with something rather weird:
After migrating code-changes from our DEV- to our QA-environment (SAP_BASIS 620, SAP_APPL 470), a newly added block of the selection-screen doesn't show up. We already spent quite some time debugging and tracing in both DEV and QA but cannot really spot a difference. The new block (B2) and field (S_DATE) show up in the selection-screen internal table SCREEN and the content looks to be identical. In addition to the complete block B2 missing, the frame-title for B3 has also gone AWOL.
This is happening for a rather straighforward selection-screen definition:
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
PARAMETERS : p_eaddr LIKE somlreci1-receiver OBLIGATORY .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t27.
SELECT-OPTIONS :
s_date FOR hrp1001-endda NO-EXTENSION.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t23.
PARAMETERS : p_tstrun AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK b3.
During debugging I already single stepped through programs like RSDBRUNT, SAPLSVAR and RSDBSPBL but nothing jumped out at me which could explain the difference between development and QA.
Do you have an idea where (else) we could look?
Thanks much and Cheers
Baerbel

Hi Vikranth!
Thanks for your quick reply and suggestion which I immediately followed and - guess what? - it worked! The selection-screen now looks like it should.
As we never before had this type of issue it never occurred to us to just regenerate the program in QA - next time we'll know and first try this simple fix.
Thanks again!
Cheers
Baerbel

Some photos dont work after importing from iPhoto 4?

Hello,
I recently upgraded from iPhoto 4 to iPhoto 6. I updated my library by copying the iLife 04 photo library to my new iMac. When I opened up iPhoto 6, it updated the library, and everything worked fine, or it seemed. All the pictures and thumbnails were there, but on around 1/3 of the pictures, I only have a thumbnail. If I click on the thumbnail, the picture never loads. On ones with a picture it loads very fast.
Any ideas?
I have the library backed up on DVD, so im not worried about losing the data, just want it to work.
Thanks,
Adam

Adam:
It may be an ownership/access problem. Manually set the ownership and access on the iPhoto Library folder as follows:
Setting Permissions for iPhoto Library Folder
1 - Select the iPhoto Library folder and type Command-I.
2 - When the Info window comes up go to the Ownership and Permissions section and make sure You have Read & Write permission and that the Owner and Group have Read & Write also. Others - Read Only.
3 - Then click on the "Apply to enclosed items..." button.
See if that may help. If not try selecting one of the files in the Original folder and type Command-I to bring up the Info window. In that window set Preview as the default application and click on the Apply to all button. Good luck.

PPR does not work after migrating from ADF 11.1.1.0.2 to 11.1.1.1.1

Hi, I'm able to programmatically refresh my UI components in ADF 11.1.1.0.2. After migrating my application to ADF 11.1.1.1.0 using the latest Jdev, I noticed that all the programmatically PPR no longer work. I'm using ADF Faces, managed beans and EJB. Data Control is not used.
In addition, I noticed in Section 7:Rerendering Partial Page Content of the latest Web User Interface Developer's Guide(B31973-03), a new paragraph was added, stating that the clientComponent attribute of the target component should be set to "true" to enable PPR programmatically. An earlier version of the developer guide(B31973-01) does not have this paragraph.
Given the huge amount of work required in going back to update the code, is there a way for me to set ADF 11gR1 to restore to the earlier behaviour in 11.1.1.0.2 by setting some parameter somwhere (e.g. in the web.xml)?

No there is no such switch. If you don't want to go through your code (which should be possible by find in files with a regular expression), you have to switch back to 11.1.1.0.2.
This would not be an option to me because of the buds fixed in 11.1.1.1.0.
Think aoubt the next version which is scheduled later this year. There you will have the same problem. If you are not fixing the code you have to stay on 11.1.1.0.2 forever.
Timo

Photos not showing after migrating from iPhoto to Photos.

Similar Messages

Maybe you are looking for