Photos not showing in browser or viewer.

When I opened Aperture today I cannot see any of my photos in my library that have less than a 3 star rating. When i hover the cursor over the project it says 1770 versions but only shows me the 36 that are rated 3 or above. When I set the filter to show unrated or above it still only lets me see the 3 star and above images. I imported more images tonight to see what would happen and they showed up in the project unrated but when I restarted the computer the newly imported images have disappeared also. It seems that the images are there but that the filter is being applied without me doing it.Do you have any suggestions?

Yes, I did try that but although the filter is set to......unrated or better it only shows me the photos rated 3 and above. I imported a few photos last night and left them unrated and they did show up in the project but when i closed aperture and reopened it I couldn't see these images either, just the 3 star and above ones. It looks like Aperture is applying the filter regardless of what I set it at.

Similar Messages

  • File Names and Ratings not showing in browser or viewer

    I seem to have a bug where Aperture sometimes fails to show the file names or their rating.
    This happens in both Browser & viewer modes. Just the blank background.
    I can see the name in the Metadata tab, but not underneath the files.
    Any ideas

    I'm having a similar problem. The U key is active and the photo name (referenced from Finder) shows up. But I can't get the ratings to show up. From what the instruction manual says, I should see the stars in the lower LH corner, but I don't see anything. I've looked to see if there is a way to make them show or hide, but haven't found it.
    Any suggestions?
    Thanks, Sue

  • Why some times jdeveloper does not show a coreect design view ?

    Hi
    thank you for reading my post
    why jdeveloper does not show a correct design view of jsf pages sometimes?
    It does not shows labels and ... , just show tag names like : form , ... ?
    here is a picture for this :
    1-incorrect page:
    http://www.flickr.com/photos/59086726@N00/217556594/
    2-correct page :
    http://www.flickr.com/photos/59086726@N00/217556595/
    I just closed and open the IDE and page designer shows incorrect pages
    thanks

    Also try this...go to the project properties for the View project. Look at the JSF Libraries and remove the two JSF libraries and then re-add them....this sometimes helps.
    Regards
    Grant Ronald

  • Old All-Day events not showing in Calendar List View

    Reviewing events in my Calendar on the iPhone and have noticed that All Day Events that are older than one year do not show in the "List" view
    For example, I have all my holidays in a calendar called "Vacation". Month and Day view list holidays from earlier than today (09 Sept 2008) properly, however list view shows nothing. Timed events (e.g. day trips) in the same calendar show.
    Similarly no Birthdays appear in the past. I can see a case for Birthdays being omitted in the past, but not other events (e.g. wanting to know exactly when you went to that all day wedding last summer)

    I have this same exact problem. For me, past events that have a specific time associated with them show up in List view; however, past events that are all day events only show in List view once in a blue moon only. Apple support has been absolutely clueless about this issue. They just tell me it's weird and they have no explanation. It's unbelievably annoying though.

  • Calendar events not showing up in list view

    Hi,
    some of my events are not showing up in list view. They are synced to the iphone. I can see them in day and month view.
    It seems to me that events created with ical and synced through MM are not showing up, but I'm not sure.
    Any idea?
    Wilfried.

    Yes I have also events from the holidays and the events I created.(Invitations and others) but where is this option for the NC? In general>notifications I can't find anything about showing events from different calendars there. And how is this subscription made because I had the holidays as soon as I input my account on this device. Maybe I included the holiday calendar but I don't remember. How is that made? And where to find these options?

  • Calendar items not showing ONLY in list view on iPhone

    Weird: My Calendar items are not showing in the list view only, on iPhone.
    They show when I search, they show in month, they show in Day views--just NOT in list view.
    Ideas?

    I just had the same problem (calendar information--for eight different calendars--OK on laptop and on Mobile me; on the iPhone only 3 of my calendars were displaying in "List" view, but all eight were appearing in "Day" view); first time I've encountered this problem (and immediately after installing the 11-February-2010 iPhone software update, so I'm suspicious that this might have been the cause).
    Solution described in posting immediately above seems to have worked. I.e.,:
    1. shut OFF MobileMe syncing for calendars on the iPhone (from Settings menu);
    2. wait for calendar entries to be removed;
    3. shut off iPhone, and wait 2 minutes;
    4. restart iPhone;
    5. turn ON MobileMe syncing for calendars on the iPhone (again, from Settings menu).
    All eight calendars now appear in List view (and still appear in Day view).

  • New tables & indexes created do not show up in dba_segments view

    Dear all,
    I have created 3 tables and some indexes, but these objects do not show up in dba_segments view. Is this a normal behaviour? Previously, with dictionary managed tablespace, I can specify the minimum extent to create, when the table/index is created. But I'm not sure how the locally managed tablespace work. Please do advice. Thank you very much in advance.
    I'm using Oracle 11g R2 (11.2.0.1.0) for Microsoft Windows (x64), running on Windows 7.
    For the purpose of reproducing this issue, I have created the tablespaces as follow:
    CREATE TABLESPACE CUST_DATA
    DATAFILE 'd:\app\asus\oradata\orcl11gr2\CUST_DATA01.DBF' SIZE 512K
    AUTOEXTEND ON NEXT 256K MAXSIZE 2000K
    EXTENT MANAGEMENT LOCAL UNIFORM SIZE 256K
    SEGMENT SPACE MANAGEMENT AUTO;
    CREATE TABLESPACE CUST_INDX
    DATAFILE 'd:\app\asus\oradata\orcl11gr2\CUST_INDX.DBF' SIZE 256K
    AUTOEXTEND ON NEXT 128K MAXSIZE 2000K
    EXTENT MANAGEMENT LOCAL UNIFORM SIZE 128K
    SEGMENT SPACE MANAGEMENT AUTO;
    CREATE TABLE CUSTOMER_MASTER (CUST_ID VARCHAR2 (10),
    CUST_NAME VARCHAR2 (30),
    EMAIL VARCHAR2 (30),
    DOB DATE,
    ADD_TYPE CHAR (2) CONSTRAINT CK_ADD_TYPE CHECK (ADD_TYPE IN ('B1','B2','H1','H2')),
    CRE_USER VARCHAR2 (5) DEFAULT USER,
    CRE_TIME TIMESTAMP (3) DEFAULT SYSTIMESTAMP,
    MOD_USER VARCHAR2 (5),
    MOD_TIME TIMESTAMP (3),
    CONSTRAINT PK_CUSTOMER_MASTER PRIMARY KEY (CUST_ID) USING INDEX TABLESPACE CUST_INDX)
    TABLESPACE CUST_DATA;
    SQL> SELECT TABLE_NAME, TABLESPACE_NAME
    2 FROM USER_TABLES
    3 WHERE TABLE_NAME LIKE 'CUST%';
    TABLE_NAME TABLESPACE_NAME
    CUSTOMER_MASTER CUST_DATA
    SQL> SELECT INDEX_NAME, TABLESPACE_NAME
    2 FROM USER_INDEXES
    3 WHERE TABLE_NAME LIKE '%CUST%';
    INDEX_NAME TABLESPACE_NAME
    PK_CUSTOMER_MASTER CUST_INDX
    SQL> SELECT SEGMENT_NAME, SEGMENT_TYPE, TABLESPACE_NAME, BYTES
    2 FROM USER_SEGMENTS;
    no rows selected

    Prior to 11g, when you created a table or whatever, you automatically allocated one extent.
    This is now no longer true and depends on a parameter I don't remember.
    dba_segments is a summary of dba_extents.
    Obviously, if there is no extent allocated, the table (view is defined with inner join) will not show up.
    You could qualify this is as a bug and submit a SR to Oracle. But then the performance impact may be huge.
    Sybrand Bakker
    Senior Oracle DBA

  • Please help!! I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000  photos not showing up. What happened?! Where did all my photos go?!

    I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000  photos not showing up. What happened?! Where did all my photos go?!

    WOOHOO!!! i finaly fixed the problem. Here is what to do:
    Chances are if you did the same thing as me you either have
    A) No album names at all for ALL your songs in your library
    or
    B) Have the same name for every album for ALL your songs in your library.
    Here is how to fix it (yah it will take a little work but its worth getting your iPod functioning properly).
    Unless you dont want to have to go and actualy set al lthe album names for every song here is what you can do:
    Go through to iTunes and arange your songs by Artist name. Click the top song for your first artist, hold Shift and click the last song for that same artist (to multi select all the songs for the artist) go into get info and check the Album box. Copy the name of the artist to the Album box and hit ok.
    Now when u update your ipod and go into ur Artists section the actual Artist name should show up instead of the song names.
    For some reason having the same album name for all your songs messes up the organization of the iPod.
    Hope this helps anyone else that is having the same problem

  • Text in landscape orientation is not showing up in portrait view

    When I have added additional pages while working in landscape mode and added text to these pages, the text is not showing in portrait view. The only text that shows is the one that comes if I have used the default text box in the 2 column mode. Even using the default textbook I find is not looking good because extra spaces I am putting in for landscape mode aren't needed in the other view. Finally, the headers are also not showing up in portrait view. What to do?
    Other difficulties:
    1) hyperlinking text is defaulting to the hyperlink character style which is not letting me change the colour from red to blue.
    2) jpg images are not being recognized as figures. I would like to be able to bookmark the images, but it is not allowing me. I would also like to have them show in portrait mode, but they are not.
    Thank you!!!

    Sorry if I'm being daft, but what do you mean by linking the text fields? I have one text box in landscape view. When I go to portrait, it no longer exists. If I insert a text box in portrait view, it does not appear in landscape.
    I'm not sure if this is the same problem, but I'm hoping you might have some ideas.
    Thanks.

  • My Photo Not Showing Up in Messages

    My photo does not show beside my texts in Messages on my Mac. Only a shadow of a generic person in a rectangle is there. I can see the photos of others who write me, though. I have my photo in Contacts and it does show up in Mail, but not in Messages. My photo also shows up in IMessage on the iPad.
    Why is my photo not showing up in Messages and how could I make it visible? Thanks.

    HI,
    Your Pic is set if you have  Buddy list set up/logged in.
    Enable the Bonjour account if you do not have Jabber, AIM or Yahoo IDs set up in Messages.
    Click on the current Buddy Pic.
    You may find it has pulled the Pic from the My Card in the Contacts app (Formerly the Address Book)
    In turn this may be picking up on the System Preferences > User and Groups > your account Login pic.
    That is to say when you set up the (Mac User) Account it asked you to create/chose a pic from the Login Screen.
    Later the process of setting up an Accounts asked for details that create the Contacts/Address Book Card  and the Login in pic is dragged across.
    AS you then get to set up Messages (Or iChat) then the My Card pic is pulled through.
    All three spots can be changed independently of each other.
    Some of the Recent Items can be from either of the others.
    This is my Buddy list pic and th "Recents" I have.
    The Zebra and head in "teeth" pics are from some testing I did with Pics in the Contacts > My Card options rather than Messages.
    Finally once you have a pic linked to Messages then it also show up at your end for the Chat window for iMessages (as well as for you in AIM or Jabber)
    NOTE
    In AIM and Jabber (Or Yahoo) your Pic is Broadcast and is what you Buddy sees next to your Name (They can override this though)
    In iMessages though your pic is not sent and your Buddy's Contacts app supplies whatever pic they have for you. (As yours does for them)
    9:10 PM      Saturday; December 8, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Date not showed when report is viewed in PDF .

    Hi,
    We have a text field that shows the date on which the report is running.Date is not showed when report is viewed in PDF.But in HTML we can view them . Can any one help me out?
    Totally there are four pages for the report.

    I have observed the PDF driver iin EPM 11.1.2.x is not up-to-date and technically the Date (Text) is there just like in HTML. However, when you increase the View (Zoom in), it eventually does show up.
    I have chatted with Oracle Support, and they will not address it with a patch for now.

  • Slideshow: why do certain photos not show?

    slideshow: why do certain photos not show; they are properly referenced
    Let me expand on this: I have 570 photos in a slide show and all are properly referenced in my library. In the slideshow window, I can see all the pics in the bottom box and when I run "preview slideshow", certain pictures don't appear in the top box whilst the curser moves across the picture in the bottom box. Likewise, if I run the full screen slideshow, that picture(s) does not appear (I have a blank screen); the next picture does show up, howerver... This happens with several dozen pictures, always the same, randomnley amongst the 570...

    Hello Tony and thank you. I regenerated and rebuilt thumbnails; I deleted the slide show and rebuilt it; nothing works. Now, I noticed something weird. All pictures are in an Aperture project and are properly referenced as I said; all the pictures in this project come from a old iPhoto project where some of the pictures are in a "Modified" folder, others in an "Original" project; it is all the pictures in the "Original" project that don't show up in the slide show.... Do you have any idea what I should do?

  • Narrative is not showing up in Layout View

    Narrative is not showing up in layout view when I'm creating a custom report. In Step 2, Creating Layout. I am hovering over add view, then down to advanced. Narrative is not showing up. How do I get this to work??? Static text and Legend is not showing either.
    Thank you for your help!!

    Hello,
    You need to have the privilege Analytics Scripting in step 4 for the narrative report to work. Only then would you HTML and javascript you apply on the Narrative report would show up.
    Please update if this works or not.
    Regards,
    Paul

  • Photoshop elements 12 photos not showing in edit bin

    I am having problems with photos not showing up in photoshop elements 12 bin. I can select the photo and when I press the edit with photo elements editor still nothing. I tried resetting, redueing everything etc. Still nothing. Also likes to freeze can someone please help me get this to work. I had this set up for months where it worked and now it is not doing andything at all. Not sure why

    What happens when you open the file by going to:
    File >> Open
    You do this by first launching the PSE Editor and then going to:
    File >> Open
    Please post back.

  • History is blank! does not show any browsing history even changing the settings v 3.6.20 Mac OS

    Regardless of the settings you choose, Firefox is not showing any browsing history. It's happening in version 3.6.20 for Mac as well as V 5 for windows. I see a lot of the same questions on the internet but no answers

    I'm on Linux. There is no QuickTime for the Linux platform, but I see the player loading (caching) that movie. The Gecko Media Player doesn't seem to be able to play that file embedded, but does play it if I open the .mov file directly in the player.
    Another good place to ask questions and advice about web development is at the MozillaZine Web Development/Standards Evangelism forum.
    The helpers at that forum are more knowledgeable about web development issues.
    You need to register at the MozillaZine forum site in order to post at that forum.
    See http://forums.mozillazine.org/viewforum.php?f=25

Maybe you are looking for