Photos not showing up in correct spots

Hello,
I created a blank text page, and have been adding text to it. And embed a photo every once in a while. It looks fine in iWeb, but when I publish the sitethe pics are on top of the text.
Any ideas?
TIA,
Mat

Your photo's are not in the text block. Try copying your photo and pasting it before or after the proper blocks of text.

Similar Messages

  • Photos not showing in the correct time order in the timeline

    On a recent holiday I was using both my iPhone and my dSLR to take photos. When I returned from holiday I noticed that the time on my dSLR was wrong. After I had imported the photos into the photo mac app I changed the timestamps to the correct one.
    Unfortunately not all of the photos reordered themselves correctly in the timeline. They are no-longer in time order, near time order, but not perfect.
    For example the first photo in the timeline currently starts at 12:30, about 5 photos later the timestamp is 11:20.
    How do I get my photos to display in the correct time order in the timeline?

    I think I've figured it out,
    When I put in the time for my SLR I set the time zone to the holiday destination.
    Despite having a local sim card and the iPhone correctly geotagging me in the location, not all the timezones on the iPhone photos are correct, some are home time zone, others are holiday timezone.
    To fix it I used the adjust time tool to change the time zone, but leave the time the same and the photos magically reorganised into the correct place.
    It seems the timezone is as important as time. I hope that helps other people

  • My Photo Not Showing Up in Messages

    My photo does not show beside my texts in Messages on my Mac. Only a shadow of a generic person in a rectangle is there. I can see the photos of others who write me, though. I have my photo in Contacts and it does show up in Mail, but not in Messages. My photo also shows up in IMessage on the iPad.
    Why is my photo not showing up in Messages and how could I make it visible? Thanks.

    HI,
    Your Pic is set if you have  Buddy list set up/logged in.
    Enable the Bonjour account if you do not have Jabber, AIM or Yahoo IDs set up in Messages.
    Click on the current Buddy Pic.
    You may find it has pulled the Pic from the My Card in the Contacts app (Formerly the Address Book)
    In turn this may be picking up on the System Preferences > User and Groups > your account Login pic.
    That is to say when you set up the (Mac User) Account it asked you to create/chose a pic from the Login Screen.
    Later the process of setting up an Accounts asked for details that create the Contacts/Address Book Card  and the Login in pic is dragged across.
    AS you then get to set up Messages (Or iChat) then the My Card pic is pulled through.
    All three spots can be changed independently of each other.
    Some of the Recent Items can be from either of the others.
    This is my Buddy list pic and th "Recents" I have.
    The Zebra and head in "teeth" pics are from some testing I did with Pics in the Contacts > My Card options rather than Messages.
    Finally once you have a pic linked to Messages then it also show up at your end for the Chat window for iMessages (as well as for you in AIM or Jabber)
    NOTE
    In AIM and Jabber (Or Yahoo) your Pic is Broadcast and is what you Buddy sees next to your Name (They can override this though)
    In iMessages though your pic is not sent and your Buddy's Contacts app supplies whatever pic they have for you. (As yours does for them)
    9:10 PM      Saturday; December 8, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • ME23n , Does not shows the values correctly in print preview

    Hi,
    When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
    For example;
    This is the vendor & its address.  (check attached image img1.jpg)
    ZERANDIB BUSINESS APPLIANCES
    Number-122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO-04
    When displaying the print preview, it shows only some parts of the above address
    Shows only; (check attached image img2.jpg)
    ZERANDIB BUSINESS APPLIANCES
    PO BOX 41,112,REID AVENUE
    These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
    I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
    In the above example, it is not showing Number-122/A and  COLOMBO-04 (Its a single word. No spaces there)
    If its like --> Number - 122/A   &  COLOMBO - 04 ,  then it will display in the print preview correctly (where there are spaces after - mark)
    check img3.jpg
    If its having more than one word, then it will display correctly in the print preview.  As below;
    ZERANDIB BUSINESS APPLIANCES
    Number - 122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO - 04
    If its 2 or more words, it shows correctly.
    If its 1 word, then its not showing!
    Why it is happening like that? Any ideas how to resolve this issue?
    regards.
    zerandib

    It turns out that this problem went away after the program crashed.  Everything seems to be working well now.

  • In iOS 7.0.2 All and Missed tabs are not showing call history correctly

    In iOS 7.0.2 All and Missed tabs are not showing call history correctly, I have iPhone 4 running iOS 7.0.2 version it looks like there is a bug. Missed call history and All calls (incoming, outgoing and missed) history is not showing properly in a list. Ideally when I click on missed it should show me recent missed call list and when I click on All it should show me (incoming, outgoing and missed) calls list sorted by current date and time.
    I would like to request Apple developer team to look into this and fix this bug asap. Thanks in advance.

    Hello gnutellabrot
    Start with the article below to troubleshoot issues with email not sending and downloading to your iPhone.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Please help!! I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000  photos not showing up. What happened?! Where did all my photos go?!

    I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000  photos not showing up. What happened?! Where did all my photos go?!

    WOOHOO!!! i finaly fixed the problem. Here is what to do:
    Chances are if you did the same thing as me you either have
    A) No album names at all for ALL your songs in your library
    or
    B) Have the same name for every album for ALL your songs in your library.
    Here is how to fix it (yah it will take a little work but its worth getting your iPod functioning properly).
    Unless you dont want to have to go and actualy set al lthe album names for every song here is what you can do:
    Go through to iTunes and arange your songs by Artist name. Click the top song for your first artist, hold Shift and click the last song for that same artist (to multi select all the songs for the artist) go into get info and check the Album box. Copy the name of the artist to the Album box and hit ok.
    Now when u update your ipod and go into ur Artists section the actual Artist name should show up instead of the song names.
    For some reason having the same album name for all your songs messes up the organization of the iPod.
    Hope this helps anyone else that is having the same problem

  • Slideshow: why do certain photos not show?

    slideshow: why do certain photos not show; they are properly referenced
    Let me expand on this: I have 570 photos in a slide show and all are properly referenced in my library. In the slideshow window, I can see all the pics in the bottom box and when I run "preview slideshow", certain pictures don't appear in the top box whilst the curser moves across the picture in the bottom box. Likewise, if I run the full screen slideshow, that picture(s) does not appear (I have a blank screen); the next picture does show up, howerver... This happens with several dozen pictures, always the same, randomnley amongst the 570...

    Hello Tony and thank you. I regenerated and rebuilt thumbnails; I deleted the slide show and rebuilt it; nothing works. Now, I noticed something weird. All pictures are in an Aperture project and are properly referenced as I said; all the pictures in this project come from a old iPhoto project where some of the pictures are in a "Modified" folder, others in an "Original" project; it is all the pictures in the "Original" project that don't show up in the slide show.... Do you have any idea what I should do?

  • Photoshop elements 12 photos not showing in edit bin

    I am having problems with photos not showing up in photoshop elements 12 bin. I can select the photo and when I press the edit with photo elements editor still nothing. I tried resetting, redueing everything etc. Still nothing. Also likes to freeze can someone please help me get this to work. I had this set up for months where it worked and now it is not doing andything at all. Not sure why

    What happens when you open the file by going to:
    File >> Open
    You do this by first launching the PSE Editor and then going to:
    File >> Open
    Please post back.

  • Why are my Whatsapp photos not showing in the Camera Roll? I have checked all the settings and everything seems ok.

    Why are my Whatsapp photos not showing in the Camera Roll? I have checked all the settings and everything seems ok.

    Have you enabled "Save incoming Media"
    in your whastapp\Setting\Chat setting\Save Incoming Media?

  • Photos not showing on Apple TV

    What reson would there be for some photos not showing in apple TV?
    Ta

    Yes, tried that but all that happened was that my Home Sharing although shown turned on on both Apple TV and iTunes did not allow me to connect to my Library, could access You Tube so WiFi connection O.K.. Tried switching Home Sharing off and then on again on Apple TV but that didn't access my Library so had to go back into iTunes on my Mac and switch off Home Sharing and switch it back on again there which then allowed me access to my Library. This resolved the problem as photos I had just taken were now viewable ( This however has happened before so not a new problem, suspect the router but as I am changing ISP soon, going to BT Infinity, hope that will solve that problem.)
    Message was edited by: brijanhub

  • HDR photos not showing in moments gallery and not sharing correctly via iCloud

    I have an iPhone 4s with ios 7 and when I take hdr photos that are not showing in my moments collection. They have the thumbnail but not the full image when I select the image and when I go to share them to icloud they don't import into iphoto either. Also when I take square photos in ios7 the photo effects arn't applied when I import them into iphoto. Thanks for any help!

    Soft reset did the trick

  • Photos not showing up in iPhoto but still in Library

    I'm having a problem with iPhoto. I just got back from a trip. I was copying using the share photo function my photos from one computer to another and after that it seems that about 500 photos are not showing up on the original computer, these photos also did not copy over. Originally, I thought somehow I had deleted them somewhere but they are in fact still in the correct places in the iPhoto library folder. However, they are not showing up when I open iPhoto. I have restarted. I have repaired permissions. I have checked the iPhoto trash- they are not there. I have viewed the hidden photos. I am at a loss. I am sure it is some easy fix I just cannot find it. Please help. I don't want to manually deal with this problem because I have already organized all of them.

    Sounds like a corrupted database, I'm afraid.
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums back.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
    Regards
    TD

  • How can I get my Windows Lightroom photos to show in the correct order on Apple TV?

    I use Lightroom on Windows 7 and iTunes as well as a current generation Apple TV.  When I export a set of photos in a specific order from Lightroom, the files are named in the proper sequence, but when the photos are displayed in the Apple TV viewer, they do not show in filename sequence.  They apparently show in the date the photos were taken by my camera.  I have a mix of scanned images and photos in my desired sequence, so the Apple TV is next to useless in showing them as a slideshow on my large screen TV.
    My investigation led me to believe that Apple TV was showing the photos in the date taken, so I instructed Lightroom to omit that data on the exported files, and the date taken shows as missing on Windows, but in the Apple TV they still show in the same sequence.
    Help!!

    Me again.  I'm pretty sure I found a solution to my problem.  I had changed the order of my slides more than once, and it turned out that the "wrong" sequence that Apple TV was using for my slides was the original sequence, not the latest sequence.  I found that when I deleted the Apple TV Photo Cache folder and database, it got rebuilt by iTunes and the slide sequence was correct.  I have no reason why the order did not automatically get updated.  I'm on the rails now!

  • Photos not showing up in Mail

    I'm using Mail 4.4. Recently most of the e-mails I receive with embedded photos now show a blue box with a question mark instead of a photo. This has only been happening for a couple of months. Photos added as an attachment can be viewed all right in Quick Look. Does anyone have any idea why or how I can correct it?

    This is normally the result of the sender having linked to a photo on a remote server, rather than actually attaching it. Then when it is sent to you, the link does not find the server with image.
    More info, please, including analyzing whether the message size could in fact contain the expected image?
    Ernie

  • New Computer and New External Hard Drive - why do folders and photos not show up?

    I replaced my desktop with a new laptop and external hard drive. I transferred photos from the desktop to the external hard drive. Lightroom 2 only shows the mapped hard drive, but does not show any folders or photos. Can Lightroom be set up to house all the photos on an external hard drive rather than using space on the internal laptop hard drive? Do the photos and folders need to be imported again into LR2? The photos are available for viewing when you search folders, but they open up in Photoshop not LR2.
    What should I do to configure imports to be housed on the external hard drive? Is this wise? I will not be able to hold all the photos on the laptop internal hard drive. Photos used to be JPEG and DNG from D700. I am starting to see NEF. Does this replace DNG? Besides RAW I also need to have JPEG for other family members to access photos on other computers connected to the network. I am watching a tutorial DVD and slowly picking up how this all works. Let me know if I am not using the correct terms.
    Hardware: HP laptop w/64bit, Buffalo 1TB RAID hard drive.

    Lot's of questions here. I'll do a few.
    Yes Lightroom can work with images on external drives. As many drives as you want.
    I assume from what you said in your original post that you have had lightroom installed on the old desktop and now wish to transfer your catalogue and all files to the external drive and work from that.
    So what you would do would be to transfer the entire contents of the lightroom folder on your old computer, except for any images, to the same location on your new laptop. This would include the catalogue files and any folders containing previews. Then you would copy all your image files to the new external hard drive. When you open lightroom you can then select the catalogue you copied from the old computer and open it. In the the folder pane in the library module you can then right click on one of the folders and select "locate missing files". Then you just need to point light room to the new location of your images. You may or may not need to regenerate all your previews.
    I store all my images on external hard drives and I even run the catalogue and previews from the same external drives. I have backups of all my images of course. I have light room make backups of the catalogue to the C drive on my laptop so that the original and the backup are stored in different locations.
    NEF is the proprietary file system for raw images used on Nikon cameras. DNG is a universal raw file format developed by Adobe. You can convert your files from NEF to DNG on import, but as Lightroom can read both types of files it is not necessary. At this point in time if you are using lightroom you should get similar results from either type of file.
    To store imports on the new external drive you can you tell light room to copy the files to the new drive or you can manually copy the files to the new location and have light room import From the current location.
    Hope this helps
    Gordon

Maybe you are looking for