Photos not updating -- what's wrong?

In iPod options, I have a couple albums selected to automatically update when I sync my iPod, but no photos are getting on there. No problem with music, just photos.
Any ideas?

I discovered that when I plugged in the Nano for the first time after installing the new software, I had it filled itself with all the music that would fit. The problem was that it filled the entire memory with music (because my music library is larger than 4GB) and there was nothing left for photos.
My fix was that I created a Smart Playlist in iTunes containing a limit of 3GB of music, and then I asked iTunes to only fill the Nano with the Smart Playlist I created (use the Preferences menu for the iPod). This way, I had 1 GB left over (I know, this is overkill, but I did have a lot of photos I wanted to put on there).
Next time I plugged the Nano in, it filled with the music I wanted and the photo albums I selected. This solved my problem. I hope it solves the others that appear in this thread.

Similar Messages

  • Iphoto won't open, says not latest version, yet ran software updates and version didn't get updated. what's wrong?

    iphoto won't open, says not latest version, yet ran software updates and version didn't get updated. what's wrong?

    Hi,
    This happened to me with Lion (10.7.4). Here's what I did;
    1). Download and install the 9.1 Update http://support.apple.com/kb/DL1322
    2). Download and install the 9.3 Update http://support.apple.com/kb/DL1545
    Hope this helps.

  • I would like to use my work exchange email on my macbook pro.  But I cannot insult it.  I have not problem as on my iPhone or iPad.  My work IT person does not know what is wrong.

    I would like to use my work exchange email on my macbook pro.  But I cannot install it.  I have no problem my work email on my iPhone or iPad.  My work IT person does not know what is wrong.  Why I try to set up the email I get the message that it cannot connect to this server. 

    Try going into System Prefereces then Mail, Cintacts & Calendars then click on the Microsoft Exchange link on the right. Type in your email address and password and allow it to set it up automatically.
    Make sure your Mac is updated to the newest version of Mail.
    If that still fails then I suggest you switch email clients. I don't care for the built in mail program. IMHO it is very buggy.

  • Need help with my satellite a105 not sure what is wrong

    I am not sure what is wrong but I think my laptop has viruses and I can not even update my virus software.
    When I go to google and type in anything, say I type in virus protection it takes me to the search results but when I click on any of the sites I get redirected to other search pages. I can not get to any page even if I type it directly in the address bar.
    I do not have a recovery disk that I know of because I was just going to reformat. Any ideas of what I can do?  a computer guy wants $125.00 to fix it.
    thank you
    Denise

    The problem is that, a lot of things work themselves deep into the Registry.  Clearly you have some kind of click hijacker on your system if all your links are going places you don't want. 
    OK, so you can try a couple of things.
    First, figure out if there is a way to update your anti-virus without doing it from within the program.  It may be possible to download the update files on your other computer and burn them to CD.  I would not recommend any method other than a CD-Rom.  If you use a USB flash stick you may transfer the infection back to your other computer.  If that's not possible...
    Secondly, you can download a program called Hijack This on your other computer.  http://www.trendsecure.com/portal/en-US/tools/security_tools/hijackthis  It will tell you what is running on startup, what kind of browser helper objects (BHO's) you have in your browser, etc.  If you can get this installed and run, post the log here, that will be useful to getting it fixed.
    A205-S7442
    C2D 1.5
    4GB Kingston Value RAM
    120GB Fujitsu HDD
    Windows 7 beta

  • Lr 5.6 error message that reading preview cache failed and will correct when reopened; does not correct on reopening; removing preview.lrdata files allows LR to open but photos not shown; what action should I take next?

    Lr 5.6 error message that reading preview cache failed and will correct when reopened; does not correct on reopening; removing preview.lrdata files allows LR to open but photos not shown; what action should I take next?

    Yikesyou have helped me before and I thank you for that.  Funny how at the last resort I ask a question and then an hour later I fix something that has been broken for five days.  I got off on the wrong foot with Lightroom installation and I really stepped in it...a lot had to do with a bad hard drive and all that.  I still have remnants of catalogues etc so I am never quite sure where I am.  I ran a search and found more than one .lrdata files.  I finally got the right one to delete and I think I am okI'll be crying to you again if I am wrongall best, thanks again for your helpjim sterne

  • I want to play candy crush on Facebook and it says i need latest version of adobe flash player, i downloaded it and it still doesn't work. i uninstalled and re installed and still not working. what is wrong? what do i need to do,

    i want to play candy crush on Facebook and it says i need latest version of adobe flash player, i downloaded it and it still doesn't work. i uninstalled and re installed and still not working. what is wrong? what do i need to do,

  • Photo not updating

    Hi,
    The Lync Server 2013 installed and configured in our environment.
    We have imported photos to all users. All users can view the photo but some of the users couldn't view photo and other users photos.
    We have tried the following article but we are facing same issue only.
    http://social.technet.microsoft.com/Forums/en-US/d5df6c37-3efa-4359-b8db-49baf37d42f8/contacts-photo-not-updated?forum=exchange2010
    We have removed registry cache also.
    Please find the image for your reference. 
     

    Hi,
    Please run cmdlet Update-csaddressbook on Lync FE server, then delete user profile on Lync client computer, restart Lync client computer and test again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Can't get ACD working not sure what's wrong

    First off can users with SNR or shared extensions work with ACD?  I'm following the guide but can't get anything to work.
    I made a basic ACD called 515 as the pilot number with all basic settings and put 2 of my extensions as members.  I then put on my autoattendant that pressing 1 goes to the ACD.
    If I call the auto attendant and press 1, it says connected, then just hangs up.
    I also don't know how to tell if I'm logged in to the ACD or how to log out.  It says in the help that you use the HLog key to log in and out, and I do have that key on my 7970 and 7960 but its grayed out on the 7970 and on both phones just says That key is not active here.  So not sure what's wrong, it seems like it's just not working in general based on it just hanging up when the AA transfers a call to it.  If I try to dial the pilot number I get a busy signal but I think it has to come from the AA from what the guide said.
    Not sure what's going on or how to troubleshoot this, any suggestions?

    Okay good to know because the help pages on setting up hunt groups say the extensions can't be shared ones so thought maybe that's why.  It seems to be something though because I made a new normal extension, removed the shared ones from the ACD members list and added just the normal one.  Now when I press HLog on the phone it logs in and out it says.
    However calling the ACD does the same thing, just hangs up.
    Is Shared extension not what I'm supposed to use if I want to have say extension 300 show on a physical phone and IP communicator?  Since normal only lets you add it to one device, I assume share is the right option?  Just seems like it causes issues with ACD.
    Not sure how to run that command you said above, I'm just following the built in help which seems straightforward just not sure why it won't work.

  • After i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

    after i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

    I am also on my forth hard drive on the same model.
    When I unpacked the computer, the hard drive did not include OS X either. Actually, it was completely blank. Did not even have a partition table! I have also had random problems with the machine not charging.
    I have replaced the drive myself with an SSD after figuring the Apple Certified technicians were incompetent. Now even the SSD is starting to fail
    I have bought an HP laptop and setup Ubuntu on it. Hope it turns out better than my previous four various Mac models. All have had various repeating hardware issues that Apple Certified technicians have been unable or unwilling to correct.

  • My iphone 4s cannot connect the internet sometimes using the 3G, but sometimes it does work. i do not know what is wrong ?

    my iphone 4s cannot connect the internet sometimes using the 3G, but sometimes it does work. i do not know what is wrong ?

    5.0.2 has not been released, thus you can not upgrade.
    Stedman

  • I downloaded three episodes of snapped but they will not play what is wrong ?

    I downloaded 3 episodes of snapped to my I pad 2 they show as downloaded but will not play what is wrong ?

    Moving this discussion to the Installing Flash Player forum.

  • I used to be able to watch net flux and hulu on my macbook pro not it the sites will not open, what is wrong?

    I used to be able to watch net flux and hulu on my macbook pro not it the sites will not open, what is wrong?

    What happens when you try?
    Try a restart.
    Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    Try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
    Safe Mode - Mavericks   also Yosemite
    Safe Mode - About

  • Contact photo not updating widget

    Hello...heres the short version:
    I have a widget of a contact...and my contacts are sync'ing with Facebook...When my contact updates their photo on Facebook; my Contact App updates; but my widget does not.
    Heres the longer version:
    Okay I know there are two ways to create a widget/contact.  For instance....lets say you have a Contact named John Smith...lets say you talk to him more than anyone so you want a Fast Shortcut....and John Smith has a full fledged Facebook Profile.  John Smith has his name, phone numbers, address, and more.  So you want a quick and easy way to get access to John Smith; right?
    Theres two ways to create this shortcut on one of your homescreens....The first option I'm sure everyone will do is to hold down on part of your screen and choose 'add widget'...as you scroll thru you will come across a 'Contact' widget...its a 1x1 size...which is the size of any app on your homescreen...so you click it and drag it to a space on your homescreen.  Next it will bring up your full conact list...here you will scroll down and select John Smith.  John Smith now appears on your homescreen pages.  Click the "icon" and you have quick access to Name/Phone Numbers/Address/Facebook/and Maybe More
    Now lets say John Smith updates his photo on Facebook, you know this cause you just launched Facebook an hour ago....so you go into your Contact List...and you're like "hmmm no updated photo"...so you go into your Settings>Accounts>Facebook>And you see the last time it sync'd with your phone...which was 1 day ago...you're thinking "okay no biggie theres a 'sync now' option"  Voila.....Your Contact App now reflects his updated photo....so you back out of your Contacts or you Click your Home Button and you see that..........yep....his photo didnt update.  So you remove the battery...you reboot device....,and no go.
    Now you could just remove this shortcut and re add it but what if you were accustomed to previous cell phones that automatically updated the photo?  This is where I am landing...I'm here asking if the Galaxy S4 has this feature?
    Ahhh dont forget theres another option to go by......
    So remember I said the common way of adding the shortcut was going thru Widgets?  Well theres 1 more way of adding a contact to your home screen....and that is...going into your contacts...find the one you want...John Smith...Hold down on the screen til a menu appears and if you scroll to bottom (Galaxy S4) theres an option that says "Add shortcut to Home Screen".  And voila...theres John Smith on your homescreen...His photo is the Icon/App that again you have easy/quick access to all the numbers he published...his Map (Address) and a quick link to Facebook + others if he has it....
    But again when John Smith updates his Facebook Profile pic....and you know cause you just exited it...You re sync' under Settings and again while it reflected on your Contact App...it still didnt affect your Shortcut!
    So my previous Cell phone was a Motorola Droid Razr (1st Edition)....my droid razr did have that feature...when someone changed their profile pic it would reflect the widget too.
    The Galaxy S4 (for me) doesnt do that....my Contact Photo still changes when I manually perform a Sync and it shows up in the Contact App, but it doenst reflect the Widget....is this natural for Samsung?  Or is my Device not working correctly?
    Thanks

    Heres an update:
    Okay whether you use the Widget to add a contact to your homescreen
    Or you go into contacts; find your contact and hold down to select menu that says "add shortcut"
    Either way....if they have a photo it will product a photo icon on your homescreen.
    Everyone knows this....however what I did find out is that when a person has a Facebook linked with that contact and they update a photo; when you click that Shortcut their updated photo will appear in that small window of theirs...however it wont update your shortcut you created....does that make sense?
    As to why? I dont know

  • Lync photo not updated even AD Profile is already updated

    Hi Gurus,
    I have similar issues with others in the forum which photo in lync client is not updated even though the its already changed in Active Directory. The others said we have to do this step :
    1. Run Update-csaddressbook
    2. Delete cache files ( ex : [email protected] )
    I did those steps but still have no luck on the issues. Is there anyone have this experience or have any solutions for this issues. Thank you very much.
    Regards,
    Maliq

    I agree with Johan...
    What Exchange server are you on?
    First run Update-CsUserDatabase - this sync FE database with AD info
    Running with -verbose will post that replication will take place in 5 minutes..
    Then run Update-CSAddressbook - This update the FE address book with the Info from its own Database
    Once again this will tell you it will begin replicating in 5 minutes...
    After 10 minutes you should be able to clear the cached files from the client and restart lync ...
    Here's a script a created to clear teh cached files on a client system, this should be run as teh standard user, as it grabs teh logge don users creds and clears the directory according to the logged on user..
    Save as a batch, on a network share accessible by everyone and run away safe time!
    @echo off
    :Start
    echo.
    rem ###### Check if Lync is running, exit if it is... #####
    tasklist /fi "IMAGENAME eq lync.exe" | find "lync.exe" >nul
    If %errorlevel%==0 goto LyncIsRunningError
    rem ###### Grab logged on user info, and remove Lync cache files, All of them! ######
    for /f "tokens=2 delims=\" %%a in ('wmic computersystem get username ^| findstr /v "UserName"') do @set username=%%a
    set uname=%username: =%
    If Exist "C:\Users\%uname%\appdata\local\Microsoft\Office\15.0\Lync\" rmdir "C:\Users\%uname%\appdata\local\Microsoft\Office\15.0\Lync\" /S /Q
    echo Clearing Lync 2013 Address Books... Done!
    echo.
    echo Sign back into Lync 2013 to download the current address book.
    goto End
    :LyncIsRunningError
    echo ERROR: Lync found to be running, closing all instances!
    taskkill /f /im lync.exe
    taskkill /f /im UCMapi.exe
    echo Done, waiting 5 seconds and trying again.
    timeout 5
    echo.
    goto Start
    :End
    And do you have any idea of difficult it is to place a cmd output into a variable in BATCH scripting?! redic!
    No it will say it can't remove a certain folder in the cached location if the user has outlook running... i didn't no script to close outlook for it doesn't get effect, or it still works either way..
    I'm also going to add that you go onto the FE server and check the attribute on user contactcard to ensure that the DisplayADPhoto attribute is set to True..
    Logon onto FE server - open powershell - and user the export-csuserdata command with the -legacy option to export as an xml file and then open the xml in IE and search for that attribute...

  • My iTunes movie "Now you see me" will not play, what is wrong?

    The movie will not play from my iTunes library. I have restarted my macbook pro, and there is no software update available for it. What is wrong? All my other movies play just fine. It does not play from the main menu, or the chapter menu. Someone help!

    Hello DJ74,
    I would recommend reporting this issue to the folks in our iTunes Store.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Cheers,
    Allen

Maybe you are looking for

  • Batch process makes image resolution change to 72dpi - it should be 300dpi - Help!

    In my work I use a batch process to run an action that converts EPS files to TIFF files. I have been using this successfully in Photoshop 7 on a Win2000 PC for a number of years. The process is as follows... Open EPS file Flatten Image Save Close Whe

  • PHP Namespaces in Dreamweaver?

    HI I was wondering if Dreamweaver supports PHP namespaces?  I've tested the following code in Dreamweaver CS4 it tells me I have an error in my code (even though it executes flawlessly on the server). person.php <?php namespace pandemicode; class Per

  • Have Mac OS 7, 8, 9, and 10.4 talk to each other, is it possible?

    If so can I have some hints (mainly with 10.4)? Models that I have networked: Power Macintosh 7500/100 (Mac OS 8.0) Power Macintosh 8600/300 (Mac OS 8.0) Power Macintosh G4 (Mac OS 9.2.2 and 10.4.11) Powerbook 520 (Mac OS 7.?.5) If needed I can upgra

  • I cant print custom sizes in photoshop CS3. Please help

    I am on my Imac G4 using mac os x 10.4.11. I know that it is not my printer that is the problem. I have been told that I should upgrade to 10.5.x, I have also purchased a new CS3 because I dont have the original copy so I cant reinstall it. The troub

  • How do I get my photos back?

    AAfter upgrading to new iPad Air 2 it asked if I wanted to try iPhoto beta and I made the mistake of saying yes. Now all of my pics are gone. They are still on my iPhone, my macb Pro, even my mac mini. How do I get them back onto my iPad?