Photos on G Drive Mobile USB Problem

A couple years ago I transferred photos from iPhoto to a GDrive Mobile USB for storage. Today when I tried to access them I get an error and none of them will open. Is this because I am running a newer version of iPhoto now? If so, how can I access them now on my MacBook Pro? OSX 10.9.1

You have old iPhoto libraries on that DDrive Mobile?
How is the EHD formatted?  It should be OS X Extended (journaled).
What version of iPhoto created the library?
What version of iPhoto are you running now?
What error message do you get?
OT

Similar Messages

  • Printer driver and USB problems

    Hello,
    I have the Photosmart C4780 printer and scanner, and have been running into issues. My computer (vaio duo 13) runs Windows 8.1 64-bit. 
    When I connect it by USB, a message pops up saying that Windows does not recognize the device, and that it has malfunctioned. I thought it might be a driver problem, so I downloaded the PS_AIO_06_C4700_140_408 file. After clicking it, it would start extracting, but would exit as soon as it hits 100%. I waite for at least ten minutes, and no further windows came up to continue installation. I did this a couple times, all with the same result. The simple driver does not work either, and the Print and Scan doctor just tells me to download the file I mentioned above. I also attempted to reinstall, but there were no files that I could find for the printer.
    I am at a loss for what could be the problem. Any help would be much appreciated!

    I have exact same problem with Lenovo Yoga 11s.
    Driving me insane, and printer will soon be dispached through my window.

  • My iPad2 went blank. Troubleshooter says driver software MTP USB problem, what do I need to do?

    My iPad2 went blank. Troubleshooter says driver software MTP USB problem, what do I need to do?

    iOS: Resolving update and restore alert messages
    For error -50: See error 13 and 14: 
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.

  • How to save all photos in IPHOTO to an external drive or USB?

    How do I save my all the photos in my IPHOTO to an external drive or USB?

    to an external drive or USB?
    Before you copy the library to the external drive, make sure it has the correct file system. The file system needs to be MacOS Extended (Journaled). If the drive has a different file system,, save the content to a different drive and reform the drive, just like described in this document for Aperture:  
    Format external drives to Mac OS Extended before using with Aperture

  • I just got my first mac pro and I can't get the photos out of iPhotos moved on my hp external hard drive, I try export says unable, then I try to drag it from the desktop to the external hard drive but same problem. Thank you so much

    I just got my first mac pro and I can't get the photos out of iPhotos and move them on my hp external hard drive, I try export says unable, then I try to drag it from the desktop to the external hard drive but same problem. what to do? Thank you so much

    How is your external drive formatted? Use Disk Utility to check the volume format. If it is NTFS, you will need to reformat the HDD as exFAT in order to retain universal compatibility (RW to it on both Mac and Windows).

  • How can i download a mobile usb driver?

    My hard drive recently crashed and I have had to redownload everything. I have downloaded itunes, but when I try and hook up my ipod it says I need an apple mobile USB driver. How can I download that driver?

    You can either use the manufacturer-supplied driver or NI-VISA to control your USB device but not both. If you have installed your device, each time you plug it in the FTD2XX.inf will associate your device with FTD2XX.sys. Then, you can use FTD2XX.dll to talk to your device using the call library function node. The DLL usually contains a whole bunch of useful functions that someone else already designed to talk to your device. This is the easier route and I would recommend it if you already have the DLL and the installed driver.
    The second method would be to uninstall or disable the driver for your device and create an .inf file with NI-VISA Driver development wiazard. This .inf file will tell Windows to use VISA as your device driver. You will, however need the vendor and product ID of the device to use VISA as your driver. The details of this are outlined in the NI document "Using VISA 3.0 to control your USB device."
    The drawback of this method is that VISA is just an API to talk to your device and you have to implement the communication protocol to talk to your device. This might take some time to do.
    This is why I recommend the first method. Someone else already implemented the driver for your and you just have to use the functions from the dll to implement your application.
    Hope this helps.

  • External Usb Hard drive and Sync Problems with Shuffle

    First of all excuse me for my bad english, i'm trying to obtain answers here, because i haven't received help from italian forum.
    I've an external USB HD where i put all my songs, the main notebook HD is too small...
    So, i charge music inside the main Itunes libray called "Music" but the the real files are still on my external HD drive.
    The problem is when i try to add a song or a folder and i don't connect the HD ext. drive to the notebook...
    The shuffle erase everything.....but the title of the songs are still in the library...
    Why??? Thx for all..

    First of all excuse me for my bad english, i'm trying
    to obtain answers here, because i haven't received
    help from italian forum.
    I've an external USB HD where i put all my songs, the
    main notebook HD is too small...
    So, i charge music inside the main Itunes libray
    called "Music" but the the real files are still on my
    external HD drive.
    The problem is when i try to add a song or a folder
    and i don't connect the HD ext. drive to the
    notebook...
    The shuffle erase everything.....but the title of the
    songs are still in the library...
    Why??? Thx for all..
    The real files have to be available to iTunes (the USB HD has to be connected) otherwise Shuffle will "update" by erasing them. That's the way it is...

  • External USB Hard Drive causes menu problem - menu items flash

    Greetings:
    I have a external USB hard drive (250 GB) that is partitioned into 3 hard drives. Two hard drives are formatted in MacOS standard and one is formatted in MacOS extended. I had to reformat the last drive in MacOS extended because the Macbook would not let me edit files on the drive.
    The problem is that when I connect to the drives, the menu malfunctions (I cannot see the date and time and the menu items flash). Dismounting the drives solves the problem.
    Do I need to reformat the hard drives? Or do I need a new USB drive?
    Thank you.
    EA

    Hmm, someone else had a similar problem.  Note the ":: Loading root filesystem module...-e" line.  That "-e" shouldn't be there.  It should be, instead, the module for the filesystem.
    As a workaround for right now, you can add your filesystem module to the MODULES array, and remove the "filesystems" hook.
    In that case, you'll probably want rootdelay=* to allow the drive some time to settle, and rootfstype=* to speed up filesystem detection while in kinit.
    By the way, what filesystem do you have on that machine?  Can you tell me what
    /usr/lib/klibc/bin/fstype < /dev/sda1
    outputs on a running system (you may need to be root, or add yourself to the "disk" group or something similar) - /dev/sda1 should be replaced if the usb drive is not sda1

  • Computer can't get the apple mobile usb driver to install?

    I get the error that the computer can't get the apple mobile usb driver to install so it won't show up on my computer or in itunes.It actually says Device Driver Software Not Sucessfully installed. Apple Mobile Device USB Driver failed. I'm using windows 7 which is fully updated, I have downloaded the newest itunes and also uninstalled and reinstalled it ans all of its components. I have followed every guide to sync your device to the computer and itunes, none of it has worked. I have unplugged my computer and tried it, I have taken the battery out of the computer and waited a few minutes and tried it. I have even gone into Device Manager looked under universal USB controllers and see an exclamation point next to the apple driver where its not working. I can click on it and tell it to look for the newest software and it says it's up to date and still not working. I have tried ever single usb advice or apple advice I can find over the last 3 hours and nothing is working. Please someone help me. I need to restore my ipad and I can't get it to show in itunes! please someone help!

    Make sure Apple Mobile Device USB driver is properly installed.

  • My iMac suddenly has a USB problem. I can connect to drives and printers. I am able to pul info off from drives. When I try to send info to a drive or printer, the connection is lost. All USB ports appear to have the same problem. Can anyone help?

    My iMac suddenly has a USB problem. I can connect to drives and printers. I am able to pul info off from drives. When I try to send info to a drive or printer, the connection is lost. All USB ports appear to have the same problem. Can anyone help?

    Please do 2-3 SMC and PRAM resets back to back and retest. Also use new cables, they can go bad.
    Intel iMac SMC and PRAM resets

  • Where is apple mobile usb driver

    since the update of itunes last week, I have lost my mobile usb driver... where can I find it? thank you muchly

    http://support.apple.com/kb/ts1538  open this articlle, and then click on number 5. Follow the directions for your specific computer to check and see it the APPLE MOBILE DEVICE USB DRIVER is installed. If it is not listed, check in "Portable Devices" There you will most likely see a entry "Apple iPhone". If so click on this link to update the Mobile device driverIf only Apple iPhone, Apple iPad, or Apple iPod appears  After you update the driver, iTunes will recognize your phone again

  • No Apple Mobile USB Driver in Device Manager

    I have tried to reinstall Apple Mobile Device Driver, but when I follow the necessary step to scan for hardware changes the Apple Mobile USB driver doesn't appear. (for reference: http://support.apple.com/kb/TS1538) I am trying to get an Iphone 5 recognized by Itunes. It still pops up in My Computer and Autoplay (images mostly). But I would like to back up this Iphone 5. Please help, thank you.

    see this
    iOS: Device not recognized in iTunes for Windows

  • Usb flash drive read only problem [solved]

    Hi, im using spacefm, i have udevil and udisks2 installed, i can read my USB flash drive but i cannot delete files, i tried gparted that use spacefm as well and i can delete files from the usb flash drive with no problems, any ideas?
    i solved i installed ntfs-3g and i can delete files again
    thanks
    Last edited by adcdam (2013-04-08 01:01:22)

    I installed it and got this error : now my Macbook wont even see the flash drive...

  • New imac doesn't locate old imac hard drive via usb port

    I have an old iMac from ~2006 that recently stopped reading the harddrive.  I pulled the HD out and connected it to my new imac via USB port but I can't locate it.  The HD spins/powers up so I know the connector is strong enough to supply power.  We connected it to my husband's PC and he can see that there is a harddrive but cannot see any files to read.  He even tried Catacombe to try to read files but it didn't work.  My first issue is how can I locate my HD on the new mac?  But the main issue is how can I pull data/pictures off of the old harddrive and import them to my new computer.  I don't hear any clicking sounds from the harddrive so it seems to be working.  I can't reformat it because I don't want to lose the pictures on it.  I don't need the old harddrive to work/write.  I just need to pull the information off of it.  TIA.

    I was not familiar with catacombae , but now I am .
    You have a problem with either a corrupt file system on the hd or a hardware problem with the hd.  I'd say try mounting in disk utility.  Try reparing filesystem on hd.  Try one of the disk repair utilities.  Some have a free trail that let's you know if they can do anything.  You pay to get the data.  Seek profession help.  Pay $$$.
    How to mount with disk utility.
    Repair the file system.  see repair disk button on lower right.
    here are some more data recovery apps.  I left out a few & am posting my complete list.
    Perhaps Disk Warrior will be of some help:
    http://www.alsoft.com/DiskWarrior/
    "Stellar Phoenix Macintosh - Mac data recovery software, recovers data from damaged, deleted, or corrupted volumes and even from initialized disks."
    They have a trial version, so I guess you can see if your data can be recovered...
    http://www.stellarinfo.com/mac-data-recovery.htm
    "Data Rescue II is the best data recovery software on the market for recovering files from a problem hard drive. Data Rescue II works when other tools fail. Data Rescue II is also completely safe to use since it does not attempt any risky repairs to the drive while its scanning."
    http://www.prosofteng.com/products/data_rescue.php
    FileSalvage is an extremely powerful Macintosh application for exploring and recovering deleted files from a drive or volume.  FileSalvage is designed to restore files that have:
    -- been accidentally deleted.
    -- become unreadable due to media faults.
    -- been stored on a drive before it was re-initialized/formatted.
    http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
    "TestDisk is a free data recovery utility. It was primarily designed to help recover lost data storage partitions and/or make non-booting disks bootable again when these symptoms are caused by faulty software, certain types of viruses or human error (such as accidentally erasing a partition table)."
    http://en.wikipedia.org/wiki/TestDisk
    Wondershare Data Recovery for Mac
    "Recover lost photos, video, documents, email and archive files from any Mac-based hard drive or external hard drive, iPod, USB drive, SD card, digital camera, mobile phone, and MP3/MP4 player, due to accidental deleting, formatting, virus infection, improper operation, unexpected power failure, and other unknown reasons. Also, iPhone recovery allows you to recover lost photos, videos, SMS, contacts, note, calendar and call history from iTunes backup file. With the free trial, you can preview all your recovered images, videos, music, documents and archive files prior purchasing this Mac Data Recovery."
    http://software.bigbigsoft.com/data-recovery-mac

  • My G-drive mobile is only recognized ocassionally.

    It will always be recognized and mounted when I plug in with USB. However when I use the firewire 800 port, it will only see it occasionally. Does anyone know how I can make sure that every time I plug it in with firewire, it gets recognized?

    FWIW, I have two 1T G drive mobile disks.  On both my Macbook Pro and my Mac Pro, the US 2 works fine with the expected read/write speeds.  When I connect using the Firewire 800 ports, the read/write speed is quite slow.  The speed is comparable to the USB 2 speeds or a bit less.  This happens on both computers, different cables and different computer ports.  It also happens with both G drives.  I called the G drive tech support and was told that the Firewire should be 2-3 times faster than the USB 2.  There maybe something flaky about the G drive interface.  For the record, I also use several 500GB G mini drives with Firewire 800 with the expected performance implying that problems with my computers is less likely than some issue with the mobile drives.

Maybe you are looking for

  • HDD blinking red light

    I have a pavilion dv4-1220us. I have noticed that from time to time the HHD starts spinning and the white/blue light turns amber and starts blinking slowing down the computer to the point that the only option left is to reboot. I cannot connect any a

  • Infotype 0002 issue

    hi, i have added one field in infotype 0002 , by pm01 . it is not getting displayed in pa30 transaction . i have already activate module pool  and layout editor plz tell me what to do .

  • A project can have only one time signature, which lasts for the entire

    length of the project. Really...? Are we in Kindergarden ? I want to make music.. What should I do next..? Is there more flexible programs out there ? Thanks bafomet

  • Ipod Shuffle (2nd gen) not working with iTunes 11.0.4

    I have my shuffle set to Manually Manage songs, and can view and add to the Ipod through 'On this Ipod' but highlighting songs and hitting the delete key is not working to remove songs. The process works for my other Ipods including my Touch and Clas

  • E-Commerce webshop Notification

    Hi All,     we have used one transaction type for e-commerce quotation and crm quotation. we have to notify the employee responsible whenever the quotation is created from Web shop by Contact Person. we have to restrict in such a way that notificatio