Photos on my Mac show the wrong date when imported from a portable Hard Drive

I’ve got loads of photos that I had imported from my old PC.Last night I decided to start going through them and trying to get them sorted  
prior to importing into iphoto. I discovered that some of the pictures (in particular ones I have taken from my old Iphone) all had the same date and time
assigned to them. When I checked the Exif details, it listed the correct camera etc, but the date created seems to have changed to the date I copied them to my portable hard drive.  
I thought this was strange as when they were on my PC I thought they were correct. I booted my PC up and checked the portable hard drive on Windows. When viewed on my PC the pictures all have the correct time and date assigned to them. However when I plug the same portable hard drive into my Mac the same files show up as being created on a more recent date (say 20th Jan 2013).
I’ve done a lot of research last night, although I can find no forum with this exact problem, I feel it must have something to do with compatibility. The portable hard drive is FAT32, and I am assuming that in order to ensure all of the photos information is transferred correctly in needs to be NTFS.
The problem I have is how do I transfer my files again from my PC to an NTFS drive, whilst keeping all of the correct date and time information assigned to the photos. My understanding is that the 2 aren’t compatible.
Has anyone ever had this problem? It mainly seems to be with photos I have extracted from my Iphone or edited in some form by rotating them.
I have a 13" Macbook Pro Retina with OSX Mavericks installed.

What you may want to do is archive as a Zipfile the photos and then transfer them to the Mac.     It is possible some of the metadata is being lost on the FAT32 formatting.    USB Flashdrive might work better than a FAT32 formatted hard drive, as I do know that most USB Flashdrives are formatted about the same as SD media cards, which manage to preserve the data when copied from camera to Mac.    My big question is, do you still have the photos on media cards?  You might just want to get a media card reader on your Mac, if the photos are not on SD cards, and transfer them over with the media card reader.
I do believe Retina MacBook Pros all have SD card readers built-in.
Note: I've asked this be moved to the MacBook Pro forum.  MacBook without the secondary name refers to the consumer notebook Apple stopped making in 2011.

Similar Messages

  • I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this

    I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this?
    I have iPhoto version 9.1.5 (615)
    Mac OS X version 10.6.8
    I want to do this because when I imported from my old hard drive there was an error message stating that 12 photos were not imported as the programm did not recognise the format even though they were jpegs like the other photos in that particular album. The dates of the photo folders are wrong I have multiple copies of photos and every time I start iPhoto I get the following message 12 photos have been found in the iPhoto library that were not imported would you like to import them No or Yes
    if you press Yes the same message comes back again and if you press Yes again the program flicks to last import for 2 seconds and then opens events.
    if you press No the message The photos have been placed in the folder/user/judith/pictures/iphoto Library recovered photos then if you press OK the original message 12 photos have been found.............
    if you press No at this point the message The photos have been placed in the folder/user /judith/pictures/iphoto Library recovered photos_11 the end number goes up by 1 every time you go through this process
    Any help would be greatly appreciated

    Did you import an iPhoto Library from the old Hard Drive? Do you still have that old Library?
    The way to clear out a Library is to Export the photos - Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
    For the annoying start-up message:
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for a Folder called 'Import' or 'Importing'.
    Drag it to the Desktop. *Make no other changes*.
    Start iPhoto. Does that help?
    If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

  • My new macbook pro (lion) iCal has been showing the wrong date?

    My new macbook pro (lion) iCal has been showing the wrong date for stored events - even though i have put the appointment in on the right date when I look it up a week or so later it has changed?
    I think it might be showing 2011 date? How can i fix this and do I have back-up of my original dates?

    Good to hear .  Happy computing!

  • Urgent BEX Report Showing the Wrong data

    Hi Experts,
    In my Cube the data is available curreclty, but where as my bex report showing the wrong data.
    like xeample:
    Infocube
    Material               Plant    Year    Units  Qty
    000000000002001032     003     2006     BAG   1,500
    But in bex i took the same selection's, but it displays as
    000000000002001032     003     2006     BAG   2
      i am Unable to trace this
    any help plzzz
    Anil

    Hi,
    since Quantity(units PC??) can not be in decimals,Bex will round off 1.5 to 2 in bex report.
    Use NODIM function i.e. NODIM(Qty) instead of Quantity.
    NODIM function is available under data functions of Formula builder.
    From context menu fo KF structure>new formula>NODIM(Qty).
    or
    try by setting Decimal places to  2 or 3 in KF properties in Bex Query.
    hope this helps.
    Message was edited by: Murali

  • My hard drive needed to be replaced for my iMac. When I move the photos from my portable hard drive back into iPhoto, the pictures show up small and I can't adjust them. How do I fix the pictures so they are full size again?

    My hard drive needed to be replaced on my iMac. When I try to move the photos from my portable hard drive back onto the Mac, they are small and can't be edited or made any larger. How can I fix them?

    YOu restore your phone from your icloud backup.
    http://support.apple.com/kb/HT1766

  • Apple Bluetooth keyboard shows the wrong letters when pressed

    Hi,
    My apple bluetooth keyboard shows the wrong letters when I write on it. If I press "c", the letter "d" shows on the screen instead. The bottom row of letters mimicks the row just above. I've tried unpairing and paring the keyboard again with my computer and my ipad. Same error. Tried resetting the pram and the smc and it still doesn't work. Changed the batteries in the keyboard and no change. I've removed some plist file (com.apple.BezelService) and its lock file like someone recommended in a youtube video. I've also checked the keyboard settings and can't find anything that seems weird.
    Does anyone have a suggestion on how to fix it or do I have to buy a new keyboard?
    /Andreas

    Before you buy a new one, take it to an Apple store (if one is near you) and have them look at it.
    Barry

  • How do I transfer data to my mac from a portable hard drive without getting error 36?

    I keep getting error 36 when I try to transfer data from my portable hard drive it says unable to read file :-(

    Hi, that -36 error can be 2 different things...
    For error -36, might try this...
    http://docs.info.apple.com/article.html?artnum=301580
    If the drive is Fat32 it can also be caused by Too many files/folders at root of the drive, files over 2-4 GB in Size, or bad characters for DOS.
    Well, in pure Apple File System talk... -36            ioErr            I/O error (bummers)
    Not very helpful, but generally means a Drive quit being Readable or Writable since starting the operation...
    http://fuzzy.wordpress.com/2006/12/10/ioerror-36/
    Can also be caused by faulty drives or PSUs on the external.
    Even possilbe you have Disk errors on the Internal drive.

  • How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

    How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

    iDVD does not care about file sizes, as it compresses the file to the standard DVD format of mpeg2.
    It only cares about length i.e. max 2 hours including titles etc.
    iDVD encoding settings:
    http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
    Short version:
    Best Performance is for videos of up to 60 minutes
    Best Quality is for videos of up to 120 minutes
    Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
    Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
    In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
    You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
    Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
    NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
    And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
    http://support.apple.com/kb/HT1502?viewlocale=en_US

  • I created a new itunes, but when i add the music i added it from my external hard drive by accident, so when i disconnect it and wish to play music without having it connected, obviously it asks me to located my songs, i dont want to locate each song help

    i created a new itunes, but when i add the music i added it from my external hard drive by accident, so when i disconnect it and wish to play music without having it connected, obviously it asks me to located my songs, i dont want to locate each song and i dont want to have to add all my music again, is there anyway of changing the location to a new folder all at once? for example, if it is my computer/harddrive/music/.... can i change it to mydocuments/musis/...
    and having the exact same music folder so all the further directions are accurate?
    thanks
    please i need help

    pass the music on your external hard drive to the computer then drag the to Itunes

  • IPod Touch shows the wrong artwork when playing songs

    Recently my iPod Touch has just decided to display all the wrong artwork when playing songs. For example I will be listening to Chris Brown and It will be showing a picture of a Jay-Z album. How do I fix this?!
    I've read that all you have to do is 'uncheck "display album artwork" in the music preferences section when your iPod is connected and click "apply". Then sync your iPod.'.. however I manually add the songs onto my iPod so I can't uncheck the music option as it's already unchecked!
    Please help, my iPod looks so ugly showing the wrong artwork lol

    First:
    SOLUTION(FIX): Editing Song titles and...: Apple Support Communities
    Then:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Why are the files I migrated over from a backup hard drive locked and inaccessible on my new used Mac Book pro? I used the migration assistant. Running Snow Leopard on a core duo.

    My laptop got pinched and I bought a used Mac Book Pro, put a larger hard drive in it and performed a clean install of Snow Leopard on the new drive, after which I used the Migration Assistant to bring over my applications, settings, documents, etc., from my backup hard drive. This hard drivekis not a Ti e Machine drive, it's one I use to clone my computer to regularly with Carbon Copy Cloner. When the migration was complete all my documents, the desktop,and other folders are locked and won't allow me to access them. What to do? Thanks for the help.

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • Wrong date when importing video from AVCHD

    Hi,
    I encountered a problem with the new Photos application: when importing photos and videos from my camera (Sony α5000, fairly recent), the dates of the videos are all wrong. In fact, all videos have the same date as the AVCHD directory on the SD card, instead of using the corresponding clip file date. I checked with iPhoto, and the app put the correct date on the file.
    Could you fix this bug? Or is there a better place I could submit the bug to?

    Welcome to the family, Shane's material will get you started.
    Also, search the forums for Nikon, DSLR, and related terms. You also need to read the manual that came with the Nikon, it clearly explains the codec in use. There are literally millions of Nikon and Canon DSLR video geeks out there and they support each other's efforts on the manufacturers' supprot sites as well as hundreds of other forums. You will find may more Nikon shooters who use FCP on Nikon forums than you will find FCP users who use Nikons here.
    bogiesan

  • I have completed the tutorial Adobe LR5 Classroom in a Book.  I have a MacBook Pro.  Every photo that I import from either my hard drive or the tutorial has red where white should be.  What in the world am I doing?

    I have installed LR5 on my MacBook Pro.  I have completed a book that had online tutorials called Adobe Photoshop Lightroom 5 Classroom in a Book.  All of my photos that are in my tutorial and the ones that I have imported from my hard drive have red on them where white should be.  I see this immediately when switching from Library to Develop before I do anything to the photo except import it.  I would appreciate any tips!

    You are seeing red because that is the color of the clipping indicator. It is indicating that the whites are being clipped. You can turn off the clipping indicator by clicking on the little square in the upper right-hand corner of the histogram. Or you can adjust your highlights, whites and exposure until the red disappears. If you see blue on your photos that is indicating that the shadows are being clipped, and that is controlled by the little square in the upper left-hand corner of the histogram.
    As a side note, you can activate or deactivate both clipping indicators by simply pressing the J key while in the develop module.

  • How to select, with a SUD DIALOG, the range and the trace data to import from citadel

    Hello,
    I use DIAdem to generate reports from Citadel and I would like to create a script which asks the user to select data and it's corresponding range to import it from citadel. The script should display a dialog box (sud dialog), the user will choose the data and the range. 
    I would like to know if a function exists because up to now, I have not found anything suitable for this.
    In my search i found this (see answer from Brad Turpin) http://forums.ni.com/ni/board/message?board.id=60&message.id=985&requireLogin=False
    But I don't know how to automatize it with sud dialog
    I am looking for information and examples on the subject.
    Thanks

    Hello,
    I changed the data base path, when I run the script an error message appeared (see attached file). When I look the dataportal files, I see that the complet data is charge and not a window (see attached file). have you any idee?
    Attachments:
    error load citadel function.pdf ‏455 KB
    view.pdf ‏279 KB

  • Have downloaded my library from a portable hard drive to itunes but not showing in library on home site please help windows 8

    trying to download music from portable harddrive and wont go to I tunes library saving as I tunes link.  working on windows 8..... Please help

    I'm not sure if iTunes will like to run those files if they're on an external drive. Honestly I've never tried. Have you tried dragging a few songs, maybe an album, into your 'music' part of your drive, then try to import them into iTunes?
    I moved computers a couple of months ago and that's waht I did, saved my music to a portable drive, then dragged it back onto my C drive and into the music folder, then imported it into iTunes.

Maybe you are looking for