Photos stretched (everyone is too thin, on the widescreen)

Hello all.
just started playing with the AppleTV. Nice system.
I'm disappointed with the photo handling. It seems everyone is slightly too thin. I'd expect that if I was using a regular 4:3 screen, but not on this 16:9 computer monitor.
I'll look into it more and see what I can find (maybe something wrong in my monitor setup? no idea). If you have any ideas please let me know.
Greg

Widescreen computer monitors normally have 16:10 aspect ratio, rather than 16:9 found on widescreen TVs. This explains why images that look right on a widescreen TV will look too 'thin' on a computer monitor - because the pixels are about 10% narrower on the computer monitor. I don't know why monitors and TVs are designed differently in this respect - it's not very helpful! I can't change the aspect ratio on my computer monitor - perhaps you'll have more luck with yours.
F

Similar Messages

Strokes are acting funny. Way too thin for the point size.

I'm on 5.5 and all of a sudden, when I apply a stroke to a photo frame, I'm not getting the width that the settings say.
For example, I place a picture on the page, I scale it, say 50%, then put a stroke on it. I barely can see it. I can put a 44 pt. stroke on it, and it looks like it's about 7 pts wide. I tried assigning it to the inside, outside, middle, same thing.
It's also doing that with the rounded corner trick. Click the yellow box, and start sliding a corner piont, and it's barely visible. I can assign a .5" rounded corner to the frame, and I can barely see the roundness.
It's crazy, and completely grinding my work to a halt.
Any ideas?

just normal, has no bearing on document size.
If I just draw a box with the box tool, strokes are normal.
It's only when I place a photo and reduce it in size do the strokes act funny.
It clearly has something to do with reducing the images.
I see there is a preference for scaling objects, and I tried both settings.
But the strokes act funny either way.

My wifes iphone was too full to record a video so I upgraded her cloud storage to 20g and did mine at same time. Cloud is showing 15g free storage butshe still cannot take any mor photos as "not enough memory" What is the point of paying for the extr

My wifes iphone was too full to record a video so I upgraded her cloud storage to 20g and did mine at same time. Cloud is showing 15g free storage butshe still cannot take any mor photos as "not enough memory" What is the point of paying for the extr

Hello Pushtheriver,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iCloud storage issues:
Get help using iCloud storage
This may also help:
Understanding iOS device capacity
You can sync and download many different types of content on your device. Some types of content (such as music and videos) typically take more space than others (such as notes and books). The amount of space taken by an app depends on the app's purpose; complex or graphically intense apps usually take more space than simpler apps.
If your device is near its capacity, you can remove some of the less used content to make room for more.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

What is the maximum size of an image height (in pixels) that supports Muse? I noticed that if the photo is too high, reduce the Muses. thanks

What is the maximum size of an image height (in pixels) that supports Muse? I noticed that if the photo is too high, reduce the Muses.
thanks

Thanks for the explanation, it was very helpful
Paolo Guercio
Il giorno 11/nov/2014, alle ore 17:00, Vikas.Sharma <[email protected]> ha scritto:
If you place in Muse - an image with either height or width larger than 2048 pixels - Muse scales the image down proportionately, limiting the larger dimension to 2048.
However, if you want to use the placed image at its original size, you can scale the image up to desired size either by dragging the resizing handles or by entering Height and Width values in the Control Strip on top. After that, go to the Assets panel and locate the image in there, then right click that image in Assets panel and choose "Import Larger Size". That would bring back the lost image information from the original image.
Hope this gives you clarity on what you wanted to know.
Cheers,
Vikas
>

I need help to decide which macbook pro is best for photo editing, editing movies and doing all the rest too like excel, word etc. 13"

I need help to decide which macbook pro is best for photo editing, editing movies and doing all the rest too like microsoft office products ...excel, word etc. I am new to the apple world and have liked the idea of the MAC Book Pro 13" but really dont know if this is good enough or if the computer will soon crash?
13-inch: 2.6GHz
with Retina display
Specifications
2.6GHz dual-core Intel Core i5
Turbo Boost up to 3.1GHz
8GB 1600MHz memory
512GB PCIe-based flash storage1
Intel Iris Graphics
Built-in battery (9 hours)2

That's a fine machine and, with 8GB of RAM and 512GB flash storage should serve you well for light video/photo editing as well as for 'normal' usage. And it should last you for years to come.
Good luck in making your decision!!
Clinton

How do print from photoshop CS3 to my new epson XP520 printer? The photos are now far too dark: never had this problem with any other printers?

Help please. I have a new Epson XP 520 printer and do not know how to set the CS3 print to get good results as my printed photos are now far too dark. Never had any problems with previous printers and despite changing settings have been unable to resolve.

System info? Exact print settings? Color management?
Mylenium

After doing a software update for iPhoto, some of the photos in my library appear distorted and stretched. I have tried repairing the library but they are still distorted. Has anyone else experienced this and found a solution?

After doing a software update for iPhoto, some of the photos in my library appear distorted and stretched. I have tried repairing the library, rebuliding and repairing the thumbnails but they are still distorted. Has anyone else experienced this and found a solution?

What upgrade did you apply? As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
OT

Hello everyone, So When I use the eraser on a photo and try to save it as jpeg is makes is save it as a copy but the parts that I erased are replaced with a white background and thats not what I want

Hello everyone, So When I use the eraser on a photo and try to save it as jpeg is makes is save it as a copy but the parts that I erased are replaced with a white background and thats not what I want

That may not be what you want, but Jpeg images are flattened, without transparency. Every pixel has a color value, with the default background usually being white. If you want to crate an image that leaves the erased area transparent, you will need to use an image format such as .gif or .pnc.

Hello everyone, I can not with the latest update to iPhoto to add localitazion on the photos on my Mac. How do? Thanks

Hello everyone, I can not with the latest update to iPhoto to add localization on the photos on my Mac . How do? thanks

What have you tried?
What happened?
Error message?
What did it say?
Any info?

I have taken a photo from an airplane and cannot get the 'map' function on the exifwizard app. Is it because I was too high? Altitude that is.

I have taken a photo from an airplane and cannot get the 'map' function on the exifwizard app. Is it because I was too high? Altitude that is. Other photos allow me to use the 'map' function.

Most likely, if you were inside the airplane, rather than sat on the wing, the iPhone couldn't get a GPS lock-on, or you didn't wait long enough for it to get a lock on.
EDIT: Lawrence is right... forgot about that.

How do I get a photo that is on my phone into the iphone cards app?

Using an iphone 4 with the new cards app. I want to try this app out. I can easily edit the "inside" and the "envelope" but cannot figure out how to put a photo that is already in my photo gallery on my phone (not in the camera roll) onto the "outside" of the birthday template. please help
and Apple, is it too much to ask to be able to find a step by step on how to use this app, I have searched with no luck

it turns out the app was corrupted, I deleted and re-downloaded and now it gives me an option to use existing photo

Share individual photos (NOT a library) between users on the same Mac

I've read through all the photo sharing posts, and have not found an answer to this question:
There are multiple users on the same Mac, running Tiger and iPhoto 5. I want to be able to export certain photos to the Shared folder so that others on the Mac can import them into their iPhoto as separate copies on their own.
The Photo Sharing methods described in many other messages here would not be ideal, because the users with the original photos don't want to have to be logged in or have iPhoto open while others are on the computer. Also, they don't want their entire library to be looked through, just certain photos that they choose to export. The "Shared" folder seems like the answer to this, but so far it's been a huge letdown.
I've tried exporting the photos out to the Shared folder, but there are access errors when the other users try to import them into their iPhoto. Even if I modify the "Everyone" access rights to read & write on the files in the shared folder, it makes no difference. Is this the wrong approach? Would doing this through the Public folder make any difference?
Is there some simple way I'm missing here? It's difficult for me to imagine that something this basic is SO hard to do on the Mac.
Thanks!

Hi Scott,
The method I use is to put the images in a folder in my ~/Public/Drop Box folder. All members can access the images in there.
Lori

Time Machine Error - The backup is too large for the backup disk

I have been using Lion (currently 10.7.1) on my MacBook Pro (13" - early 2011) since it was released. I haven't had any serious problems with it.
All of a sudden, I am getting an error in Time Machine. When it tries to run a backup, the error "This backup is too large for the backup disk. The backup requires 7.51 GB but only 630.1 GB are available." What gives? That's plenty of room. I have installed Logic Studio and a few plug-ins, so the 7.51 GB is probably right. The free space is correct as well. I can't understand what the problem is.
The backup disk is an external USB 2.0 drive with no other Time Machine backups on it or any other files. The folder "Backups.backupdb" is the only thing on the root of the disk.
I am reluctant to reset the Time Machine and lose all of the backups, but I will if anyone recommends it.

Hi Linc,
It is not working at the moment, as I have restored the original Lion image again; it has all my work and apps on it.
Many thanks for the info on the log, though. It tells a strange story. Here's the log from the last backup that worked to the first one that failed: --
Sep 12 17:15:55 Johns-MacBook-Pro com.apple.backupd[674]: Starting standard backup
Sep 12 17:15:55 Johns-MacBook-Pro com.apple.backupd[674]: Backing up to: /Volumes/Backup/Backups.backupdb
Sep 12 17:15:55 Johns-MacBook-Pro com.apple.backupd[674]: 100.0 MB required (including padding), 633.72 GB available
Sep 12 17:15:55 Johns-MacBook-Pro com.apple.backupd[674]: Waiting for index to be ready (100)
Sep 12 17:16:00 Johns-MacBook-Pro com.apple.backupd[674]: Copied 793 files (601 KB) from volume System.
Sep 12 17:16:00 Johns-MacBook-Pro com.apple.backupd[674]: 100.0 MB required (including padding), 633.72 GB available
Sep 12 17:16:01 Johns-MacBook-Pro com.apple.backupd[674]: Copied 89 files (93 bytes) from volume System.
Sep 12 17:16:01 Johns-MacBook-Pro mds[34]: (Error) Volume: Could not find requested backup type:2 for volume
Sep 12 17:16:01 Johns-MacBook-Pro com.apple.backupd[674]: Starting post-backup thinning
Sep 12 17:16:01 Johns-MacBook-Pro com.apple.backupd[674]: Deleted /Volumes/Backup/Backups.backupdb/John’s MacBook Pro/2011-09-11-154229 (1.1 MB)
Sep 12 17:16:01 Johns-MacBook-Pro com.apple.backupd[674]: Post-back up thinning complete: 1 expired backups removed
Sep 12 17:16:01 Johns-MacBook-Pro com.apple.backupd[674]: Backup completed successfully.
Sep 13 10:34:12 Johns-MacBook-Pro com.apple.backupd[287]: Starting standard backup
Sep 13 10:34:12 Johns-MacBook-Pro com.apple.backupd[287]: Backing up to: /Volumes/Backup/Backups.backupdb
Sep 13 10:34:52 Johns-MacBook-Pro com.apple.backupd[287]: 7.51 GB required (including padding), 630.11 GB available
Sep 13 10:34:52 Johns-MacBook-Pro com.apple.backupd[287]: No expired backups exist - deleting oldest backups to make room
Sep 13 10:34:52 Johns-MacBook-Pro mds[32]: (Error) Volume: Could not find requested backup type:2 for volume
Sep 13 10:35:03 Johns-MacBook-Pro com.apple.backupd[287]: Backup failed with error: Not enough available disk space on the target volume.
I don't understand. For starters, I think it's a little wasteful that 3.5 GB has been used to back up 601 KB. That's the difference in free space on the backup volume between the two backups. That can't be normal, surely.
The only error is that mds[32] error, and from what I've read on forums, that seems to appear on backups that work perfectly.
Too weird. It looks like I'll have to reinstall Lion and all my applications again to get Time Machine working, or find another backup solution.

Photos in iPhoto cannot be found in the Library Folder on the desktop

I have a perplexing problem with iPhoto 6. A couple of months ago, I started a new Library and renamed it Current iPhoto Library placing it on the Desktop (rather than in the Pictures Folder).
I did this because my laptop became too full and I ran out of hard disk space. The original Library resides on an external hard disk.
I added many new photos to the new Library, inside of new albums.
My problem is that all the new photos seem detached from the Library Folder on the desktop.
They do take up memory, and now my laptop hard disk is full again.
But I cannot free up space because the Library folder does not recognize the existence of the new photos—even though while in iPhoto, with the program is running, I have no trouble accessing all the photos.
I tried DiskWarrior, assuming that there was a Directory malfunction. That did not help.
I tried rebuilding the Library using iPhoto's built-in capability, by starting the program while pressing the Command and Option keys. No help.
How can I make the Library Folder recognize all the photos that iPhoto can see fine within the program?

First, thank you for keeping up with me.
Second, where do look for Folder? On the desktop? iPhoto?
Third, in replaying what must have happened, I think I have an idea of what went wrong. Originally, I moved my first Library to an external HD to free up space on my laptop, and I started a new Library. Some time ago, iPhoto must have spontaneously created a new third Library. It left what I am calling the second Library as the only visible folder containing an iPhoto Library. I was able to mount the small second Library when I restarted iPhoto by pressing Option and selecting the only Library that was visible to me. When I did that, unfortunately iPhoto disengaged from the huge third Library it had created. All along the third Library was invisible on the desktop as a folder--which is why I got into trouble. I ran out of space again and wanted to move the contents of what I now realize was a third Library to another external HD. But I couln't find that Library anywhere. Strangely, for the last three months, I did not know there were three Libraries, only two. The one iPhoto created as the third one worked perfectly when I would start up iPhoto. But now it is gone. Not even DiskWarrior can find it.

"Backup is too large for the backup volume" error

I've been backing up with TM for a while now, and finally it seems as though the hard drive is full, since I'm down to 4.2GB available of 114.4GB.
Whenever TM tries to do a backup, it gives me the error "This backup is too large for the backup volume. The backup requires 10.8 GB but only 4.2GB are available. To select a larger volume, or make the backup smaller by excluding files, open System Preferences and choose Time Machine."
I understand that I have those two options, but why can't TM just erase the oldest backup and use that free space to make the new backup? I know a 120GB drive is pretty small, but if I have to just keep accumulating backups infinitely, I'm afraid I'll end up with 10 years of backups and a 890-zettabyte drive taking up my garage. I'm hoping there's a more practical solution.

John,
Please review the following article as it might explain what you are encountering.
*_“This Backup is Too Large for the Backup Volume”_*
First, much depends on the size of your Mac’s internal hard disk, the quantity of data it contains, and the size of the hard disk designated for Time Machine backups. It is recommended that any hard disk designated for Time Machine backups be +at least+ twice as large as the hard disk it is backing up from. You see, the more space it has to grow, the greater the history it can preserve.
*Disk Management*
Time Machine is designed to use the space it is given as economically as possible. When backups reach the limit of expansion, Time Machine will begin to delete old backups to make way for newer data. The less space you provide for backups the sooner older data will be discarded. [http://docs.info.apple.com/article.html?path=Mac/10.5/en/15137.html]
However, Time Machine will only delete what it considers “expired”. Within the Console Logs this process is referred to as “thinning”. It appears that many of these “expired” backups are deleted when hourly backups are consolidated into daily backups and daily backups are consolidated into weekly backups. This consolidation takes place once hourly backups reach 24 hours old and daily backups reach about 30 days old. Weekly backups will only be deleted, or ‘thinned’, once the backup drive nears full capacity.
One thing seems for sure, though; If a new incremental backup happens to be larger than what Time Machine currently considers “expired” then you will get the message “This backup is too large for the backup volume.” In other words, Time Machine believes it would have to sacrifice to much to accommodate the latest incremental backup. This is probably why Time Machine always overestimates incremental backups by 2 to 10 times the actual size of the data currently being backed up. Within the Console logs this is referred to as “padding”. This is so that backup files never actually reach the physically limits of the backup disk itself.
*Recovering Backup Space*
If you have discovered that large unwanted files have been backed up, you can use the Time Machine “time travel” interface to recovered some of that space. Do NOT, however, delete files from a Time Machine backup disk by manually mounting the disk and dragging files to the trash. You can damage or destroy your original backups by this means.
Additionally, deleting files you no longer wish to keep on your Mac does not immediately remove such files from Time Machine backups. Once data has been removed from your Macs' hard disk it will remain in backups for some time until Time Machine determines that it has "expired". That's one of its’ benefits - it retains data you may have unintentionally deleted. But eventually that data is expunged. If, however, you need to remove backed up files immediately, do this:
Launch Time Machine from the Dock icon.
Initially, you are presented with a window labeled “Today (Now)”. This window represents the state of your Mac as it exists now. +DO NOT+ delete or make changes to files while you see “Today (Now)” at the bottom of the screen. Otherwise, you will be deleting files that exist "today" - not yesterday or last week.
Click on the window just behind “Today (Now)”. This represents the last successful backup and should display the date and time of this backup at the bottom of the screen.
Now, navigate to where the unwanted file resides. If it has been some time since you deleted the file from your Mac, you may need to go farther back in time to see the unwanted file. In that case, use the time scale on the right to choose a date prior to when you actually deleted the file from your Mac.
Highlight the file and click the Actions menu (Gear icon) from the toolbar.
Select “Delete all backups of <this file>”.
*Full Backup After Restore*
If you are running out of disk space sooner than expected it may be that Time Machine is ignoring previous backups and is trying to perform another full backup of your system? This will happen if you have reinstalled the System Software (Mac OS), or replaced your computer with a new one, or hard significant repair work done on your exisitng Mac. Time Machine will perform a new full backup. This is normal. [http://support.apple.com/kb/TS1338]
You have several options if Time Machine is unable to perform the new full backup:
A. Delete the old backups, and let Time Machine begin a fresh.
B. Attach another external hard disk and begin backups there, while keeping this current hard disk. After you are satisfied with the new backup set, you can later reformat the old hard disk and use it for other storage.
C. Ctrl-Click the Time Machine Dock icon and select "Browse Other Time Machine disks...". Then select the old backup set. Navigate to files/folders you don't really need backups of and go up to the Action menu ("Gear" icon) and select "Delete all backups of this file." If you delete enough useless stuff, you may be able to free up enough space for the new backup to take place. However, this method is not assured as it may not free up enough "contiguous space" for the new backup to take place.
*Outgrown Your Backup Disk?*
On the other hand, your computers drive contents may very well have outgrown the capacity of the Time Machine backup disk. It may be time to purchase a larger capacity hard drive for Time Machine backups. Alternatively, you can begin using the Time Machine Preferences exclusion list to prevent Time Machine from backing up unneeded files/folders.
Consider as well: Do you really need ALL that data on your primary hard disk? It sounds like you might need to Archive to a different hard disk anything that's is not of immediate importance. You see, Time Machine is not designed for archiving purposes, just as a backup of your local drive(s). In the event of disaster, it can get your system back to its' current state without having to reinstall everything. But if you need LONG TERM storage, then you need another drive that is removed from your normal everyday working environment.
This KB article discusses this scenario with some suggestions including Archiving the old backups and starting fresh [http://docs.info.apple.com/article.html?path=Mac/10.5/en/15137.html]
Let us know if this clarifies things.
Cheers!

Photos stretched (everyone is too thin, on the widescreen)

Similar Messages

Maybe you are looking for