Photos tab does not show specific albums

Under the Photos tab in iTunes, I canNOT choose the 'selectd albumns' radio button to sync only specific photo albums. FYI...I also have this same problem when trying to sync an AppleTV to iTunes.

I found the cause but no solution, it's actually a plugin that does that: divx plus weblpayer (it gets installed when you install DivX on your system), if you disable it and restart firefox it all works again. But I want that plugin... so DivX need to fix this, unless it is a Firefox bug in its own core... anyway these two together creates the problem.
(I'm running Firefox 9.x on OSX Lion)
I also wish firefox tab tear out tab worked more like chrome's tab tear out, much friendlier...

Similar Messages

  • Trying to sync photos from iTunes (via iPhoto) to ipad and iPhone. The  Photo tab does not show up and no sync occurs

    Trying to sync photos from iphoto to ipad and iphone.  Photo tab does not show up in itunes under devices. 

    I had a similar problem (https://discussions.apple.com/message/24525903#24525903)
    The solution in my case was to start iPhoto and let it update the library, even thu itunes was set up to sync with Aperture.

  • HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

    I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
    I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
    I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
    Thanks,
    Toks

    Hi Toksyb!
    You may want to try clearing out the PRAM on your computer. This process is explained through this article:
    About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Custom Ribbon tab does not show in generic list

    Hi.
    I'm deploying the following definiton on a generic list, but the new custom tab does not show up. Anyone that can see what I have done wrong?
    Thanks!
    <Elements xmlns=”http://schemas.microsoft.com/sharepoint/“>
    <CustomAction
    Id=”Ribbon.MyTab”
    Title=”Adds a new Ribbon tab to Generic List”
    RegistrationType=”List”
    RegistrationId=”100″
    Location=”CommandUI.Ribbon.ListView”
    >
    <CommandUIExtension>
    <CommandUIDefinitions>
    <CommandUIDefinition
    Location=”Ribbon.Tabs._children”>
    <Tab Id=”Ribbon.MyTab” Sequence=”110″ Description=”" Title=”My Tab Name”>
    <Scaling Id=”Ribbon.MyTab.Scaling”>
    <MaxSize
    Id=”Ribbon.MyTab.Scaling.MyGroup.MaxSize”
    Sequence=”15″
    GroupId=”Ribbon.MyTab.MyGroup”
    Size=”LargeMedium”/>
    </Scaling>
    <Groups Id=”Ribbon.MyTab.Groups”>
    <Group
    Id=”Ribbon.MyTab.MyGroup”
    Sequence=”15″
    Description=”"
    Title=”My Group Name”
    Template=”Ribbon.Templates.MyTab.MyGroup.CustomTemplate”>
    <Controls Id=”Ribbon.MyTab.MyGroup.Controls”>
    <Button
    Id=”Ribbon.MyTab.MyGroup.Button”
    Alt=”Ribbon.MyTab.MyGroup.Button”
    Command=”Ribbon.MyTab.MyGroup.Button_CMD”
    Image16by16=”/_layouts/images/siteIcon.png”
    Image32by32=”/_layouts/images/siteIcon.png”
    LabelText=”Button”
    Sequence=”10″
    TemplateAlias=”o1″
    ToolTipTitle=”Button”
    ToolTipDescription=”Shows a dialog” />
    </Controls>
    </Group>
    </Groups>
    </Tab>
    </CommandUIDefinition>
    <CommandUIDefinition
    Location=”Ribbon.Templates._children”>
    <GroupTemplate Id=”Ribbon.Templates.MyTab.MyGroup.CustomTemplate”>
    <Layout Title=”LargeMedium”>
    <OverflowSection Type=”OneRow” TemplateAlias=”o1″ DisplayMode=”Large”/>
    <OverflowSection Type=”ThreeRow” TemplateAlias=”o2″ DisplayMode=”Medium”/>
    </Layout>
    </GroupTemplate>
    </CommandUIDefinition>
    </CommandUIDefinitions>
    <CommandUIHandlers>
    <CommandUIHandler
    Command=”Ribbon.MyTab.MyGroup.Button_CMD”
    CommandAction=”javascript: alert('Hello World');” />
    </CommandUIHandlers>
    </CommandUIExtension>
    </CustomAction>
    </Elements>

    Hello,
    I was able to use your custom ribbon tab XML just fine.  The only thing is, the copy you provided had a bunch of illegal characters embedded in it (like reverse quotes?), I'm not sure if they're showing up in your version of the XML or not.  Anyway,
    after replacing those with straight quotes and fixing some other misc formatting, it worked fine.  I created an empty SharePoint project and added an empty element, then added your XML to the Element.xml file.  In SP, I created a new custom
    list and the "My Tab Name" tab appeared with a button that displayed "Hello World" when I clicked it. So, I recommend checking the formatting of your XML.  Just look for red squiggles in the editor and fix them.
    Regards,
    - Kemp Brown [MSFT]

  • When I "enhance" a photo, it does not show up in slideshow, it is just black

    When I "enhance" a photo, it does not show up in slideshow, it is just black.  I am using Iphoto.  I also can't email these "enhanced" photos.

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Info tab does not show in iTunes 11.1.2 in iPad sync window

    I have OS 10.9 on my iMac, iOS 7.0.3 on my iPad, and I'm using iTunes 11.1.2 . I had only one problem syncing my iPad with the iTunes--the info tab does not show in the sync window. Has the method of syncing calendars changed? How can I do this

    I found the following in another discussion thread:
    If you use OS X Mavericks v.10.9 or later, your contacts, calendars, and other info are updated on your computers and iOS devices via iCloud. For more information, see iCloud Help at icloud.com. (http://support.apple.com/kb/PH12117)
    Since I do not use cloud computing for security reasons, I will not be syncing my contacts or calendars between devices. I hope the Apple developers rethink this strategy. Meanwhile I'll figure out a work-around as I have in the past when software has an unfortunate glitch.

  • ESS tab does not show up after deploying ESS

    We did every configuration step for ESS and we had no issue before for other projects.
    However this time ESS tab does not show up on EP even the roles are assigned.
    ALL Jco tested OK.
    What could be wrong?
    Thanks for your help.

    Jose:
    Thanks!
    I think I miss
    BP_ERP5ESS
    BP_ERP5MSS
    Because I am at ecc6 enhp4, the matrix at Wiki did not specify above BP version.
    Could you tell me what version of
    BP_ERP5ESS
    BP_ERP5MSS
    should be applied to the EP7.01?
    Follow up:
    Jose: I do see the BP at the same Wiki:
    BP ERP05 ESS 1.41 SP04
    BP ERP05 MSS 1.41 SP04
    BP ERP05 COMMON PARTS 1.41 SP04
    I am going to apply them on the portal. Do you agree? Thanks again.
    Thanks!

  • Tab does not show when dragged into it's own new window

    This happened after I updated to Firefox 8.0.1. Same problem with 9.0.1. I'm on a Mac running OS X 10.5.8. I have not changed any add-ons, plugins, extensions, or anything like that.
    Every time a tab is dragged from my main window to form it's own new window, the tab button on the new window does not appear. I only have a + sign showing.
    A tab will show when I open a new tab, but the original "tab" does not appear. The + sign also appears on the left side of all new tabs. Isn't it supposed to be on the right?
    If I have 2 "tabs" open but only have 1 tab showing and try to close the window, Firefox asks me if I'm sure I want to close the 2 tabs.
    Tabs when opening blank new windows work properly. Dragging a tab to an already opened window works fine as well.
    Most of the time a tab is dragged out on accident, and it is quite annoying because I can't drag it back into the main window.
    Any help or suggestions would be greatly appreciated.
    Many Thanks!

    I found the cause but no solution, it's actually a plugin that does that: divx plus weblpayer (it gets installed when you install DivX on your system), if you disable it and restart firefox it all works again. But I want that plugin... so DivX need to fix this, unless it is a Firefox bug in its own core... anyway these two together creates the problem.
    (I'm running Firefox 9.x on OSX Lion)
    I also wish firefox tab tear out tab worked more like chrome's tab tear out, much friendlier...

  • Arrangement tab does not show when trying to connect macbook air to tv

    im trying to connect my macbook air to my tv. the arrangement tab in the display tab in system preferences does not show. help please!

    Hey jgomez93!
    Here is an article that will help you troubleshoot issues with using external displays:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • ITunes 10.5.1 for Mac: Album artwork is there, but does not show in album overview

    I have certain self-sampled albums which have the correct artwork embedded in every track, but in the album overview the artwork does not show. However, the artwork is there, because as soon as I select the album, the artwork presents itself in the left lower corner of iTunes.
    Is there a way to rebuild the artwork thumbnauils that are presented in the album overview - similar to iPhoto?
    Thank you very much for your kind help, Stefan

    In Post iTunes 10.5.1 Album Artwork Dilemma, User cul cul la praline recommended a user with a similar problem to apply the script "Embed Artwork" from Doug's applescript page. I followed his advice, but chose the script "Re-Embed Artwork".
    Funny enough, the script resolved part of my problem. I the album overview, some albums still carry the grey note, but when I single-click them, they change to display the cover art ...

  • Signing up for iCloud wiped out my contacts and my photos and does not show my documents,  what happened?

    Signing up for icloud wiped out my contacts, photos, and my apps.  It also does not show my pages docs for my imac.  What happened?

    You can install the portable Firefox 3.6.19 version.
    * http://portableapps.com/apps/internet/firefox_portable#legacy
    * http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • Click firef0x tab does not show import so I can move favorites

    I click on the firefox tab upper left. Does not show import. I looked in freq questions on favorits and it said to go to firefox tab and click on import. The import is not there

    Hi,
    I had this problem. Solution was to move mouse over taskbar icon. When Firefox displays small icon right click this and select maximise window !!! I think somehow Firefox got minimised to the taskbar and would not reopen as a full window. i.e it when you clicked the taskbar icon it would pop up and then pop back down to the taskbar again !!
    Hope this helps.

  • The mini bridge tab does not show up on my panel

    Hello,
         I'm trying to use mini bridge in Photoshop, but it does not show up on my panel on the lower left.  I currently have Bridge open.  I just want to access it through Photoshop. Thanks for any suggestions you might have.

    As far as I everything is up to date.  I have a Macbook Pro. here is the screen shot

  • I can no longer download in Safari.  The Download tab does not show up in toolbar any  longer. Can anyone help?

    I like to download old music videos from the 50's.  Recently the Download tap in Safari does not show up anymore.  It's as if I did something that may have deleted it.  I can't find away to get it back.  For now I've switched to my Google App which works just fine.  Any help or suggestions would be appreciated. Thanks

    Start downloading the music video.
    The Download button should appear when you start downloading anything from the web.
    If the download list is empty, download button will not be shown by default.
    Best.

  • Photo Tab does not appear on 20GB ipod

    Hey, my ipod is acting strangely. When i first bought it it was working fine and i could load photos and viewed them on the ipod normally. But all of a sudden the photo tab has dissapeared on my ipods menu. I have gone into settings and gone to the main menu settings part. I turned photo on but its still not appearing. Ive restarted my ipod, ive checked itunes photo settines, ive turnd my ipod on and off repeatidly, ive charged my ipod fully.... I'd like to think i know enough about ipods to fix this myself but im clueless here. Any help would be greatly appreciated

    I followed the topic concerning the Firefox photoalbum problem but I´m using Safari and the albums will not show up on the web !!!! I also exchanged the detailview and headercontrol *js which worked fine for opening the photoalbum on my harddisk with firefox. But when its uploaded to the server it won´t display and that in Safari!!!! On the published folder on my harddisk everything works fine
    www.voyage64.com
    just cklick on "photoalben" no album apears. Does anyone have the same problem with safari ???
    regards,
    David

Maybe you are looking for

  • My apple tv is not recognising my apple id and password

    My apple tv is not recognising my apple id and password after this new update. Netflix is also don't let me play any movies. I already reset the equipment, network is ok because some features of of apple tv are working fine such as renting from Itune

  • Sony Cam iLink to MacbookPro Firewire 800 what cable?

    I have a Sony Handcam which has an iLink DV output and I know it will feed into my Macbook Pro Unibody Firewire 800 port for iMovie'09 but what iLink cable do I need as there are different pins 4-4 6-4 etc? Looking at the ports they look the same siz

  • CX_SY_CONVERSION_NO_NUMBER?While uploading an Excel File.

    Hi, I am trying to upload an excel which contains customer number, shipping point details , time details....... The upload program was working before upgrade to ECC 6.0. But right now when i try to uplaod the file i get the following dump messege. Un

  • Numbers Multiply Does Not Work with Currency Data Items in Numbers!!!

    If I enter a number in Numbers let's say it is $2758.98  and I create a function to multiply it times 12  it is off by four cents.  It says $2758.98 * 12 = $33107.80 but it should say $33107.76 This happens no matter what number I enter.  It is alway

  • Example of JList with a ListModel

    I really need an example of a JList using a ListModel. I need that cause im thinking in have a line with hidden columns. I tried something but it didnt work. Tks, Ice