Photos will not save after upgrade to iOS 7

Hi!
My iPhone 5 will not save the photos I take with the camera, or other apps.
After I take it and goes to the Camera Roll, there is nothing there.
This was not an issue with the iOS 6. And the settings are the same.
Everything is ok in Settings-Privacy-Photos. And in Settings-General-Privacy everything is Allowed.
Does anyone else have this problem?

You have to download the proper ipsw file again: http://www.ipswdownloader.com/
And install it on your iPhone, using iTunes.

Similar Messages

  • My photos are not displaying after upgrade to iOS 7, My photos are not displaying after upgrade to iOS 7

    On our ipad 2, after upgrading to iOS 7, the photo album is completely screwed, and the saved photos are not displaying correctly. How do we get our photos Back?

    OK, tried the reset and it seems to have cleared up some problems; however, the picture problem remains.
    Maybe there is something further we could do in settings? My wife uses the iPad as her constant companion and likes to take screen shots (pictures) of recipes and such. She keeps them in albums. Before the update to iOS 7 they all displayed correctly regardless of physical machine orientation. Now, post update, when in landscape mode, which she uses 99.9% of the time, her pics do do fully display. By physically rotating the machine, they will appear correctly. We have noticed that there is a new "function" in edit pics for "aspect ratio."
    Should we be using this? If so, she'll have to edit a very large number of pics. So I'm wondering if we're missing some new setting. BTW- this display problem also occurs with pics taken with the camera as well.

  • Photos will not save after iOS4 upgrade

    As subject says; wife's 3GS was upgraded. Did a full restore (wipe clean) then synced the backup after installation.
    Not an issue with existing camera roll pics. Those are fine.
    Camera will take pictures....you can then close the camera app, and picture is in camera roll.
    If you choose the pic you have just taken (to MMS, email) an "photos saving" message will appear and never leave. The only way to get out of this is to shut the phone off completely. Upon turning the phone back on, the photo is not in the camera roll.
    If you take a picture, close the camera app, open the camera roll, the picture is there. Shutting the phone off (either by hard reset or using the lock button) then turning the phone back on....no picture.
    I've restored twice, and resynced the backup twice. Same result.
    My iPhone 3GS is having no issues...so you can imagine the glares that I get because I have messed up her phone....
    Thanks to all who reply.

    After reading and learning more about iPhone backups than I ever thought I would...here is how I (with the help of others) solved this.
    -copied all photos and videos from camera roll using the Image capture
    -prepared a backup copy of wife's iOS 3.13
    -deleted all iOS 4 backups I had of wife's phone
    -restored phone to new with iOS 4
    -did not restore phone with backup of iOS 3
    After all of this....I deleted everything in the old 3.13 backup except the info.plist, manifest, etc files AND the files attributed to the stuff wife did not want to lose (contacts, SMS)
    -then, connected phone, instructed itunes to restore a backup...pointed it to the 3.1.3 folder that I had edited...it only had 7 files in it.
    -it restored this "backup" so wife had contacts and sms.
    -after this, resynced all her apps, media, photos, etc.
    She lost her settings and data for individual apps, but retained what data was necessary.
    After all this...what had happened was her iOS 3.1.3 backups kept getting corrupted...and this was going to continue unless a different approach was taken. All of these steps came from various postings on other forums.

  • My Epson Scan software running my Epson Perfection v500 Photo will not run after upgrading to mavericks. Any suggestions?

    After upgrading to Mavericks I find that the Epson Scan software will no longer run so I cannot now use my Epson Perfection V500 Photo scanner. Is there a solution to this? If not can I delete Mavericks and go back to Mountain Lion?

    Hi...
    Epson is working on new drivers / software for this scanner.
    Until then, you can perform basic scanning from Image Capture.
    Or go for 3rd party app. like vuescan.
    Regards
    Dennis

  • MP3 Music will not play after upgrade to ios 5

    I upgraded my iPhone 4 to IOS 5 yesterday.... Great!
    But now when I want to listen to my MP3 from the new "Music" app, the MP3 gets stuck and will not play.
    I have audiobooks and videos too and both plays ok with good sound and pictures.
    Can anyone help?
    TQ

    I fixed it by deleting the MP3 and re-loaded / re-sync it back.
    It took over 2 hrs as I had over 1000 Mp3.

  • IMovie will not update after upgrading to iOS Yosemite

    Have upgraded to Yosemite on iMac and Mac book, but iMovie will not update on either devices...it begins the long update and never seems to complete.  On the iMac it says "no updates available" but the iMovie icon is crossed out on desktop.  Says that version is not compatable.  Macbook is showing an update for iMovie, but have tried several times to update and has not worked yet.  Any suggestions???

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • My iMessage will not work after upgrading to iOS 8

    I have tried everything and cannot get iMessage to work since i upgraded to iOS 8

    go to settings, general, reset, reset all settings. this causes the phone to reset and finishes installing certain iOS 8 features in iMessage like self destruct, etc. and should fix any glitches you're having.

  • Edited photos will not save in stacked version after editing

    edited photos will not save in stacked version after editing

    Thank you problem seems to be solved.
    edited photos will not save in stacked version after editing
    created by Barbara B. in Photoshop Elements - View the full discussion
    Is this PSE 12? Go to editor>Help>updates and apply the 12.1 update, if so.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6417103#6417103
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: 
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I am using Iphone 4 (not 4s) After upgrading to ios 5.0.1. is blocking. I live in Venezuela

    I am using Iphone 4 (not 4s) After upgrading to ios 5.0.1. is blocking. I live in Venezuela

    Without more information, I have to say it sounds like the phone you have was not legitimately unlocked, but had been hacked. Updating iOS will re-lock it to the original carrier.
    ONLY the carrier it is locked to can authorize unlocking it.
    Where did you get the phone?

  • IPhone Home Button not working after upgrade to ios 5.1.1

    Hey everyone,
    I'm pretty sure this is a software failure due to the symtoms the iPhone is showing;
    0 - the home button does not work at all when the phone is turned on and running ios 5.1.1, well it used to work okay when i had ios 5.0.1, I upgraded to 5.1.0 and started working randomly, upgraded to 5.1.1 to see if it was fixed with no luck at all.
    1 - When locked the screen does sometime light up, like when you press the home button and don't slide the unlock button. but it does not exit apps anytime, I mean it doesn't act like it's pressing the home button randomly but only when the phone is locked.
    2- The button does work perfectly when iOS is not running: I can get in and get out of recovery and dfu mode at will, that wouldn't be possible if the button were broke.
    3- what else? Oh yea, not really a symtom: Tried the 'home button calibration' several times.
    4 - It's not filthy, since I really cleaned it thoroughly with a powerful tiny nozed air blower I got and gave a rubbing alcohol treatment too.
    5 - when I shut the phone down it instantly turns back on, I can interrupt the turning on for turning the phone into dfu mode (i'm sure It's in DFU mode because the tinyumbrella log monitor tells me)
    I'm now using the 'soft' home button that goes in the accesibility options, but hey, I didn't pay a ton of money for a phone that the same Apple is gonna break down.
    It's out of warranty and I don't have apple stores where I live.
    I'd downgrade to 5.0.1 in a snap if I could but I'm not into jailbreaking, so the shsh blob thingie is not a possibility.
    Any apple dev around that can give me a workaround?
    thanks a lot in advance
    Added more info ~ 

    I had the same problem with Home button not responding after upgrading from iOS 5.1 to iOS 5.1.1 on an iPhone4.   I solved it but not sure exactly what fixed it.   Here is what I did.
    1.  Took it local Apple store Genius appointment.   They used a special tool and took some lint out of the connector opening.   The Home button started working.   They said even though the phone was out of warranty, I could buy a new replacement one without a contract for $150. 
    2.   The Home button stopped working when I got home.   I got some compressed air in a can and blew the air through the connector to try and clean out more dust.   I now keep the phone with the connector opening facing down in my pocket.   I also struck the phone downward on my hand or other soft surface to force as much dust out as possible.
    3.  The Home button still was intermittent.  I then tried to do a hard reset by holding the power on key and the Home button simultaneously for about 10 seconds.  This doesn't work if the Home button doesn't respond.
    4.  I connected the iphone to Itunes via the USB to sync the phone.  While connected, I did a Hard Reset by Holding the Power button and Home button simultaneously.  I noticed the Home button responded better when connected to ITUNES via the USB.
    5.  I did a backup of the iphone4 by highlighting the iphone 4 while connected to ITunes and right mouse click and selecting BACKUP.    I was prepared to reset my phone4 in iTUNES and restore it from the backup.
    The phone worked consistently before I had to do this.
    6.  As a last resort which I didn't need to do, I was going to copy all my settings for the iphone by selecting the phone in iTUNES and looking at all the sync settings.   I would then have restored the iphone to original factory settings and then sync the phone using the copied settings.  This would have made sure that the backup didn't include the bug.
    Fortunately, I didn't have to do step 5 and 6.   Things started working after Step 4.  So I don't really know if it was the iOS 5.1.1 upgrade or pure coincidence that the Home button stopped working immediately after the upgrade.

  • IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

    iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

    I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

  • CS5 will not open after upgrading to Yosemite

    CS5 will not open after upgrading to Yosemite

    Hi Clickchris,
    CS5 Photoshop is supported on Mac OS 10.5.7 and 10.6.
    It has not been tested on Yosemite as it is a very old version of the product.
    Please refer to below document.
    http://helpx.adobe.com/photoshop/system-requirements.html#main_Photoshop_CS5_system_requir ements
    Thank you for posting on Adobe Forums.

  • Quicktime will not open after upgrading to "Snow"

    Quicktime will not open after upgrading to "Snow". The light underneath the dock icon lights up but the application does not open. Suggestions?

    Actually, wasting bandwidth is a waste of people's resources who offer to help here. You posted and got answers to your post. What you thought of that would be better (for you) was posting it in every corner of AD that might get read would give you a response 30 nanoseconds faster than posting once. So read your answer and enjoy your computer.
    All you need to do is post in the right forum section, and wait for a response. It will come unless nobody has a clue which rarely occurs.

  • ITunes will not launch after upgrade--click, bounce bounce, nada

    iTunes will not launch after upgrade--rebooted nothing--2 bounce icon
    then shut down all and unplugged, restarted--no change, iTunes still will not launch after upgrade
    iTunes current version
    on imac w/10.6.8

    I have the same issue.
    Allready uninstalled iTunes and reinstalled it, but the same problem occurs.
    Icon keeps bouncing, and all that's visible is the first menu-item in the top menu bar, named iTunes. Nothing is clickable though.
    The iPhone Configuration Utility doesn't seem to work either, it crashes on uploading an app to my iPhone. I guess it's using some of iTunes' libs or something.
    Does anyone know how to get iTunes working again? I'm getting pretty desperate over here...
    Thanks!

  • Edited photos will save in edited photos will not  save in photoshop are being saved in my pictures on hard drive. wants me to import edited are being saved in my pictures on hard drive. wants me to import edited photos from my hard drive in to photoshop.

    edited photos will save in edited photos will not save in photoshop are being saved in my pictures on hard drive. wants me to import edited are being saved in my pictures on hard drive. wants me to import edited photos from my hard drive in to photoshop.

    Use iPhoto. What's the problem with iPhoto import? It's a two clicks job. Select your device and click import.

Maybe you are looking for

  • Question about Customizable Components in JDev 10.1.3.2 version

    Hi, I have some some questions about new ADF features. 1) As we see at the image: http://www.sttb.pl/jakub/customComp.JPG custom component doesn't display polish letters. How to resolve it ? 2) In command components (button or link) there is enable n

  • Building OCI samples: Why is code commented out in ocikpr.h?

    I am trying to build a SDI application using VC++ 6.0 on Windows 2000. When I use this header ocikpr.h I get these errors: d:\projects\vc\oci\testme2\cdemo2.cpp(78) : error C2660: 'oopen' : function does not take 7 parameters As in the header file oc

  • Socket stays open after java process exits, Runtime.exec()

    I have a program that does the following: opens a socket Does a runtime.exec() of another program then the main program exits. what i am seeing is, as long as the exec'd program is running, the socket remains open. What can i do to get the socket to

  • Loaded lion yesterday, now computer crashes at start up.

    loaed Lion yesterday and all seemed fine. Now today computer continually crashes on start up. Now what ?

  • Mac not listening to SSH port

    When I try to access the server remotely, it's giving me with an error: ssh_exchange_identification: Connection closed by remote host The firewall on Mac is disabled and all the traffic are allowed on my router to access the Mac from public IP. I'm u