Photos with TS-E 24 II are pixelated (both in PS5 and LR4)

Hi there,
I started a discussion about this problem already in the LR4 forum. But as this is related not only to LR, but seems to be a general problem of ACR, I thought to add a link also here to attract also other people experienced with ACR, but maybe not so much with LR... esp. Adobe staff would be highly appreciated to jump in!
http://forums.adobe.com/thread/1097304?tstart=0
Short version: Photos (RAW, of course) made with an Canon TS-E 24 II are rendered extremely pixelated both with LR4 and PS5.

Thanks - this was already yur statement at the beginning of the discussion in the LR forum. But the links you provided lead to a missing low-pass filter in this specific camera discussed - this cannot be the reason for the 5DMkII. Plus it only happens with this lens, and with no other.
So although I am also still confienced that it is a problem of ACR rather than the lens, it must have a different reason. This is why the discussion ist still ongoing...

Similar Messages

BUG: Unable to publish any photo with a width or height 800 pixels.

My first attempts to publish a Photo page resulted in an alarmingly consistent: "Publish error: an error occurred while publishing file {filename}.jpg". These are standard .jpgs from a variety of digital cameras which I've been putting up on various photo pages using Homepage directly in .Mac, so one would think that they would work in iWeb without a hitch.
Well.... it just doesn't work, and it stalls as soon as it hits "Uploading Photos..." before I eventually get the "Publish error" described above.
This appeared to be file dimensions related (I was able to get a much smaller image to publish), so I investigated.
A file that's 667 wide by 1000 high fails every time. Scale down to 334 x 500, it works. Trying some sizes in between: 534x800 works. 666x999 fails. (567x850 fails. 550x825 fails. 534x801 fails.
So my guess is, it's looking like any picture with a dimension greater than 800 pixels on either side will fail. Let's test this.
Stretching the image to 800x800: It works!
Stretch it again to 801x800: It fails!
The verdict: can't publish a photo with a width or height > 800 pixels.
(Bug)
Apple: please fix this....! It's possible to work around this for now, but this is totally undocumented and not very friendly...!
David Miller

Start by confirming here that you have the absolute latest Epson drivers from Apple:
http://www.apple.com/downloads/macosx/apple/firmware_hardware/epsonprinterdriver sformacosxv1061.html

Greetings from a Photoshop Newbie. I need a computer, preferably a Mac laptop, with some serious processing power. I take photos with a Pentax 645Z; files are 50MB raw. I upload from Adobe Bridge and manipulate the photo, sometimes turning them into files

Greetings from a Photoshop Newbie. I need a computer, preferably a Mac laptop, with some serious processing power. I take photos with a Pentax 645Z; files are 50MB raw. I upload from Adobe Bridge and manipulate the photo, sometimes turning them into files in excess of 250MB. I cannot resize as the large files are needed for enlargements. Have all sorts of problems trying to manipulate, add effects and saving most large files. I need some serious processing power. Can anyone suggest what Mac i should purchase? I thank you in advance for your help :-)

It sounds as if you're having some system-related problems now, unrelated to processing power as such. In particular, a buggy video driver can cause everything to slow to a crawl.
Medium format files are big, true, but not so big as to cause significant slowdowns on a normally functioning and reasonably current computer. A laptop will always be slower than a well-equipped desktop system, though. Mac vs PC plays no part in this, performance is unrelated to platform.
Bottlenecks are different in ACR and Photoshop, so that should give you a clue. ACR is computing-intensive and mostly limited by CPU speed. Photoshop, however, is mostly bandwidth-intensive and mainly limited by memory and disk throughput. It's also sensitive to GPU issues.

HT203808 I deleted my old e-mail account associated with my iCloud, i need to reset both my ID and my password. however i don't remember that password. how can i reset it?

I deleted my old e-mail account associated with my iCloud, i need to reset both my ID and my password. however i don't remember that password. how can i reset it?

Hey Frankgates!
I have an article here that can tell you how to do this:
Apple ID: If you forget your password
http://support.apple.com/kb/HT5787
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Final Cut Express, latest (last) version, Pixelation: Both .mov files and photos

I've been using mpegstream clip to convert my mpegs to AIC .mov files. They are pixaleted in canvas but look sharp in viewer. Cannot seem to fix - exceedingly frusterated (today's my birthday (seriously), I'm trying to finish a project, but am instead writing this - I've spent more time trying to figure out how to make this work than I've spent working on the project).
Same issue for photos. Oddly, I could originally bring in JPEGs and they looked blurry. Then I tried resizing (I am aware of the pixel size difference issue) - worked for a while. Then for no apparent reason all of my photos were sharp, and now none, no matter what I do to resize.
The tools I have to work with:
Final Cut Express
Appreture
Iphoto
Whatever came with my Mac
I do not have photoshop.
I would be very grateful for any help solving this problem.
Thank you.
Tobias

MtD -
First, thank you for responding. Although I've read these conversations avidly, this is my first foray into any online question and I am seriously grateful for the response.
I've posted the browser properties first and the Sequence clip properties second.
Sequence:

Photos sync from computer folders, but are in the wrong albums and some photos only appear as a white box?

On my iPad 2, I'm syncing my photos through iTunes from folders on my computer, as I am a photographer and don't like to use iPhoto and not have direct access to my original files.
My photos sync without any hassle, but when viewing them on the iPad half the photos present as white boxes or a half photo/half white screen. I tried resetting iPad as a last measure, I've deleted the photo cache etc, to no avail. In fact, the most recent time I tried it didn't fix the white screen, but also added another issue- my photos now are completely mixed up within the albums. Christmas photos and showing in the Easter album and so on, there seems to be no logic in it! As I was given my iPad last month by my father in laws company, they had bought their stock a while ago and it's now out of AppleCare support - even though I've only used it for a month! Any help would be greatly appreciated! Thanks!
My Mac is a 1 yr old MacBook pro running snow leopard. My iTunes was the second oldest version, have just updated to most recent version, but it hasn't fixed anything.

Updating to the latest Iphoto release solved this. First time it rebuilt the libraries the pics appeared again.

How to export photos with titles in chronological order. Checking box for title and keyword doesn't seem to work

I want to export a group of JPEG photos including titles in the order in which they were taken. Checking the box to include titles and key words seems not to work.

You can not
exporting creates files - files have no order - the order is set by the program you use to view them - for example in the finder you can view files by the date created, date modified, size, alpha, etc
So to control the order when viewing in the finder you must have an attribute that the finder can sort on set - the most common way to export photos in a specific order is to make an album in iphoto in the order you want and then export the album using the sequential naming option of the export command - then view them in the finder using a alpha sort - Exporting From iPhoto
However since you want to retain your existing title that will not work for you

HT5654 my iphone 5 fell did not break but went completely black and non responsive. When I plug it to the computer I get a white screen with black apple. When I push both the Top and Homne buttons simultaneously I get the charger picture plug end plus arr

my i phone 5 was dropped, didn't break but went completerly black screen and nonresponsive. I pushed both the home button and top button no response. I plugged it to the computer it gave me white screen with black apple. I pushed the home and the top went black then gave the itune and the charging plug picture. I tried to download and update, the message came as couldn't restore due to unknow error. Any help??

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have photos with the same numer but they are different photos how can I fix that?

I have photos with same names but they are different photos. Can I rename these photos ? How can I do this?

you can save a file with the same name by dragging and dropping from iphoto to a Finder folder
but (and there are always buts) you can only do up to 4 photos at a time
any more and you are not given the option
This is the error message you get:
An item named “IMG_8770.JPG” already exists in this location. Do you want to replace it with the one you’re moving?
4 or lesss your options are:
Keep Both Stop Replace
5 or more your options change
Skip Stop Replace
it will add a space and a 2 to the name
IMG_8816.JPG turns to IMG_8816 2.JPG
this is the solution I was looking for; let the computer do the name change
Cheers!

Tips for printing photos with HP ePrint

Hello,
I will be giving you guys a couple of tips on how to print photos with HP ePrint. These are general tips to make it a little more easier to use HP ePrint.
#1: Have 4" x 6" photo paper preloaded in your printer
The first step in getting quality photo prints with HP ePrint is having 4" x 6" HP Photo Paper preloaded in your printer’s dedicated photo paper tray. If your HP ePrint-enabled printer doesn’t have a separate photo paper tray, just make sure that photo paper is the only paper loaded in the tray when printing photos.
All photos e-mailed with HP ePrint will print at a default size of 4" x 6".
If available, your photos will automatically print on paper from your printer’s dedicated photo paper tray.
If you don’t have photo paper loaded into your photo paper tray, this message will appear on the printer’s display: “Load paper into photo tray”.
If you have 5" x 7" paper loaded into the tray, it will still print a 4" x 6" photo on the paper, leaving a white border along the top and the side.
HP ePrint will ensure your image is printed with the correct orientation so your photo won’t be cut off.
#2: Make sure your photos have a high enough dpi
Check your image’s dpi: Right-click on your image on your PC’s desktop, then selectProperties, and the Details tab.
The second thing to remember when printing photos with HP ePrint is to make sure your digital images have a high enough resolution, or dpi (dots per inch).
Image files (like jpeg, bmp, tiff, etc.) need to be at least 100 dpi in order to print via HP ePrint.
If you send a photo that is less than 100 dpi, it will not be printed. Instead, you will see a message in your job history on the ePrintCenter that says “Failed”.
To print a photo or image that is less than 100 dpi, insert the image file into a Word document before e-mailing. Your image will be printed on paper from the main printer paper tray.
Image attachments must be less than 5MB (megabytes). Also, HP ePrint supports a maximum of 10 attachments to a single e-mail. E-mails that exceed these limits will not print.
Find out how megapixels affect the resolution and quality of your digital photos.
If you guys have anymore questions let me know.
Also, remember if you find any of my post helpful or want to say thanks make sure to click the white star under my name to give me Kudos.
I really appreciate it!
Thanks!
This question was solved.
View Solution.

I hope this is helpful!
Also, remember if you find any of my post helpful or want to say thanks make sure to click the white star under my name to give me Kudos.
I really appreciate it!
Thanks!

Syncing photos with correct orientation

I know this has been mentioned in a few threads, but there hasn't been a satisfactory answer so far.
Just to summarise - when you sync photos with your iPhone, the EXIF rotation/orientation information is lost and photos are always displayed in the 4:3 orientation, and never 3:4 if required.
As near as I can tell, Apple just haven't bothered coding the orientation information (or creating a 3:4 thumbnail, I'm not sure how the ithmb format works exactly) when it is creating the photo database for syncing with the iPhone. Yet it works fine with iPhoto...
I've trawled through the Apple support pages and can't find any mention of this or how to get Apple to address such a serious problem. It's very frustrating syncing my photos to my PC, only to have them lose their orientation when syncing them back to the iPhone.

Probably the best that you can do is submit this to Apple's iPhone feedback page:
http://www.apple.com/feedback/iphone.html
If this is bothering enough people, maybe they'll make that change in future revisions.

Printed images are pixelating

Images already printed clearly, are pixelating when I copy and then past as layers onto a new canvas.
This is a proceedure I have used many times in the past, and am quite surprised, and lost, about the reasons for it.
Any help on this question?

Hi, Trevor,
The light came on, and the problem corrected...knew it was something simple,and upon reading your response, realized that another adjustment I was using (setting the canvas size to the media size) was creating the problems with the pixels.
Thanks for your quick response.
Randy P. Green
Please note: message attached

IPhoto '11 Sharing Photos with MobileMe Login Error

Hello -
I am using iPhoto '11 on my iMac and when I try to share a photo with my MobileMe account I am prompted for a username and password (I am sure I am using the correct UN / PW) it tells me that it cannot verify me.
BTW - I am not sure if this is related, but I keep getting messages from Safari telling me various xxx.me.com server certificates are invalid and suggesting that someone my be spufing me.
Mac Jonathan

Greetings,
I haven't heard of that issue directly myself, however your mention of the shared wireless network via one Mac's Airport card will not give the best performance compared to an actual wireless router: http://store.apple.com/us/product/FB321LL/A
As a quick and simple test:
Turn off the Airport card on both computers (Airport > Turn Airport off)
Shut both computers down (Apple > Shutdown)
Plug the ethernet cable going between your modem and your 1st Mac so that it goes directly from one Mac to the other
Once the ethernet cable is plugged in, turn both computers back on
Launch iPhoto on both systems and test
If it works then I'd say get yourself an actual wireless router as sharing an entire photo library over your network is a relatively stressful activity and it would benefit from a router.
If it doesn't work reply back
Hope that helps.

Ipod Photo with frozen mousewheel

My I was just listening to my music on my Ipod Photo.
I wanted to turn it of and turned the hold button off and held the play/pause button. When it didnt turn off, i tried a simple reset to see if that would help. by then i noticed my mousewheel didnt respond at all.
When i was back home i restored it to the factory settings and so on... i tried everything multiple times, but my mousewheel still doesnt respond. I find this trange cause before the problem, my ipod worked nearly perfectly.
Since i live in holland i cant find any other repair service then apple itself. i'm skilled enough to change the battery and hard disk myself if needed, but i dont know anything about the rest.
can anyone help me with this problem?

hi jenny,
no problem at all. Just hook it up and name it. Should be no problem with the one firewire connector. i have both an iPod and shuffle hook up at the same time. itunes shows them both in the source column.

In SharePoint 2013, some of the userswith contribute or full control rights are not able to edit and save office doucuments to SharePoint library.

In SharePoint 2013, Office 2010 and IE 8. Office web apps is not configured.
Some users with Contribute or full control are not able to edit and save documents back to SharePoint library.
When they try to save they are getting following error:
1. https://.....pptx is read-only. Do you want to save changes to a different file name?
2. Project canot access "https://...."
Try one of the following
The file may be temporarily open by another program. wait a momoment and try again.
A file with the same name may already exists. Save it with a different file name.
You may be trying to save to a read only folder. Save to a different folder instead.
Please help me with this issue.
will be waiting for any suggestions or solutions.
Thanks
Krish
99

Thanks again for quick response.
I have requested users who are having this issue to try check in/ check out, and share the results.
Result with CheckIn/CheckOut:
User was able to check out but no edit option.
'Edit Document' option under 'Files' tab was greyed out. I did check permissions every thing seems fine he has full control over the site and document library.
Please advise.
Thanks
Krish
99

Photos with TS-E 24 II are pixelated (both in PS5 and LR4)

Similar Messages

Maybe you are looking for