Photoshop 11 deadphotoshop elements 11 wont start , can i reload from disc with original codes

can I reload my photoshop elements 11 from disc with original codes , it wont open at all ????

Yes. Or try downloading from this link and validate with your 24 digit serial number - click here for PSE downloads

Similar Messages

HT1349 i upgraded to yosemite last week, now my computer wont start. it stops at white screen with apple logo. what do i do?

i upgraded to yosemite last week, now my computer wont start. it stops at white screen with apple logo. what do i do?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

HT204302 i get a message when I plug in my ipod to my laptop saying "cannot use this ipod because apple mobile device is not started" can any one help me with this...I have never had this happen before

Hello anyone
I get a message when i plug in my ipod touch saying "cannot use this ipod because apple mobile service is not started" can anyone please help me with this problem...I had this message once before but I forgot how to correct it

From the More Like This section on the right:
I get error message when I plug in iPhone 4s saying "This iPhone cannot be used because the Apple Mobile Device service is not started"
can't get my ipod to connect to tunes error message "cannot be used because the apple mobile device service is not started" fixes? Using Win XP
im trying to connect my ipod to itunes and its saying it cannot connect because the "Apple Mobile Device is not started" help
Or see: iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

I'm trying to download the adobe creative cloud app so I can get Photoshop CC but it keeps failing and I get this pop up with Error Code 205

I'm trying to download the adobe creative cloud app so I can get Photoshop CC but it keeps failing and I get this pop up with Error Code 205. What does that mean?

Link for Download & Install & Setup & Activation problems may help
-Chat http://www.adobe.com/support/download-install/supportinfo/
OR
-http://forums.adobe.com/community/download_install_setup
-http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
-http://helpx.adobe.com/x-productkb/global/errors-or-unexpected-behavior-websites.html
-http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
-Server won't connect https://forums.adobe.com/thread/1233088

I can not register this product with the code supplied? [was:Photoshop]

I can not register this product with the code supplied?

Welcome to the forum.
Along with Trevor's important questions, I have a few more, please:
Did you buy Ps directly from Adobe (the Adobe Store), or from a certified reseller, such as directly from Amazon?
Did you buy Ps with physical media, or as a download?
If the former, did you get the S/N from the envelope that the media came in?
If the latter, did you get the S/N directly via e-mail from Adobe?
Do you get any error messages?
If so, what is the exact text of each one?
When you say "register," do you mean Activation, or actually registering with Adobe?
Good luck,
Hunt

How can I change from paying with a credit card to using prepaid for itunes

How can I change from paying with a credit card to using prepaid for itunes on ipad 2 .alrwady have app ID

iTunes Store: Changing Account Information
http://support.apple.com/kb/HT1918
Apple ID Support - Manage Account
http://www.apple.com/support/appleid/manage/
 Cheers, Tom

Can I share USB disc with my iPhone with airport extreme

Can I share USB disc with my iPhone with airport extreme

Yes, if you use an App like Filebrowser on the iPhone.
http://www.stratospherix.com/products/filebrowser/

Can not burn a disc with I tunes

I can not burn a disc with I tunes any more , I updated the soft wear have use several new disc but get the same results(attempt to burn disc failed errorr #4280) I can burn disc using Microsoft Media player
Thanks

Have you tried a Cleaner CD yet?
Have you done a PRAM reset, CMD+Option+p+r...
http://docs.info.apple.com/article.html?artnum=2238

I can sent photos from IPhoto with email. But if I try to sent the photos from the IPhoto application, it doesn't work. I receive the message : "Le serveur de messagerie n'a pas reconnu l'association de vos nom d'utilisateur et mot de passe". Help ?

I can sent photos from IPhoto with email. But if I try to sent the photos from the IPhoto application, it doesn't work. I receive the message : "Le serveur de messagerie n’a pas reconnu l’association de vos nom d’utilisateur et mot de passe". Help ?

iPhoto Menu -> Preferences -> Accounts ->
Delete and recreate your email settings.
Alternatively, use Apple's Mail for the job. It has Templates too - and more of them.

Photoshop Elements 9 wont start

Hi
I've successfully been using Photoshop Elements 7 for some time now, but have recently downloaded a trial version of Photoshop Elements 9 (PSE9). The installation was successfull - no errors. When I started PSE9, the welcome screen started fine, I selected the organiser. The familiar organiser started - then before it completed its load, it crashed and returned me to the Windows desktop.
Looking through the forums, the advice was to ensure underlying software (Apple, Mircosoft etc ) is OK....done that, still would not start. Have also de-installed PSE7 and Premier Elements 7, cleaned the register, renamed the PSA file......still nothing - the organiser wont start.
Finally, I've started the editor - that works fine.....however, the organiser still wont start from the editor.
Help appreciated
Graham

Start PSE to get to the Welcome screen. Hold down the Ctrl, Alt, and Shift keys and click Organize. Keep holding down the keys until you see the Catalog window. Select your catalog and click Repair. Select “repair anyway” even if PSE doesn’t find problems.
Then for good measure, click Optimize. (The documentation says that Optimize merely optimizes the performance of your catalog, but some people have reported that it also enabled catalog conversion to proceed after they initially encountered errors.)
If repairing the catalog doesn’t help, repeat the steps above, but instead of clicking Repair, click New to create a new test catalog.
If you’re able to import photos into the new catalog and the Organizer works correctly, then there’s likely something about the old catalog that is corrupted in some other way.
try and let me know your comments.
Thanks,
Garry

I need to reinstall Photoshop and Premiere Elements 10. Where can I find the download link?

I need to reinstall Photoshop and Premiere Elements 10 on my Windows Laptop. Where can I find the download link?

If you registered your copy with adobe, you may find download links by going to the main page of adobe.com and clicking on My Adobe and working through the links there. If they're still available there, save the downloads this time, don't just run them, since adobe only makes those available for about 3 years.

Photoshop and premiere elements will not start

If there has been an answer, I apologize for asking, I'm haven't gotten any answers from adobe chat and have reached frustration!
I have photoshop and premier elements 9 on windows 7. They worked fine for about a year then both recently stopped working, they didn't open. So I uninstalled and reinstalled from the disk and they worked.
A few days later, the same story. They stopped opening. I've only installed the programs on this one computer.
I could reinstall again and see if that works, but I think there is a 2 computer license which I might have reached since I couldn't deactivate before reinstalling because I couldn't access the program. It also seems silly to reinstall every time I need to use it.
All ideas appreciated!
Anne

Bypass the Unwelcome Screen by creating Desktop shortcuts for the Organizer and the Editor, and restarting your computer.
The Editor's executable is:
"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
The Organizer's executable is:
"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
The Unwelcome Screen leaves a zombie process running which prevents the actual program from launching again.
Ken

Photoshop Elements 10: Can't install from disc

Please help. Just purchased software and not sure how to install from discs. Nothing popped up when I inserted disc, but I can see the files? Which ones do I use?

Looks like you are installing from the wrong disc. Can you verify and get back if you still have problems?
Disc Number
Description
1
Windows
2
Windows 7 (64 bit)
3
Mac OS
4
Adobe Premiere Elements content disc for Windows
5
Adobe Premiere Elements content disc for Mac OS

HT1291 my start up disc is almost full, can i migrate from disc 1 to disc 4 in the same mac pro desktop machine

I have a mac pro quad 8, my start up disc is 500 gig, my time mach disc is 500 gig, i have these in position 1 and 2 in my comp, i have 2terra byt disc in possy 3 and possy 4 in the mac pro, can i migrate in the same mach. from start up disc to disc 4 and once completed can i then change disc 4 to strt up disc bay one position. as such then have a start up disc wich is two terra bytes? and if so how do i go about that. your help is much apreciated , thanks.

Yes, you can. Use Disk Utility to clone one disk to the other:
Clone Lion/Mountain Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Check the box labeled Erase destination.
     5. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     6. Select the source volume from the left side list and drag it to
         the Source entry field.
     7. Double-check you got it right, then click on the Restore button.
Destination means the Disk 4. Source means the current startup drive - Disk 1.
Note that a Time Machine backup drive needs to be a minimum of twice the capacity of the drive it backs up. If you have a 1 TB startup drive, then you need a 2 TB backup drive if you use Time Machine.

After 10.4.11 upgrade Macbook won't start can't boot from external HD

Hi guys,
I just suffer as all other that after try ti install the 10.4.11 update my macbook won't start, I have a external HD with a image of my macbook but went I press and hold the option key I only see the bootcamp parttion and my internal HD, I don't see the external HD.
How can I boot from my external HD if I have a bootcamp partition?
Thanks

I follow the robotobi post and solve this issue.
Thanks robotobi

Photoshop 11 deadphotoshop elements 11 wont start , can i reload from disc with original codes

Similar Messages

Maybe you are looking for