Photoshop 12.1 32 bit and Windows 7 autoplay issue

Hello. I've come across a problem with Windows 7 and photoshop and I was wondering if someone can point me in the right direction.
I installed Adobe Masters Collection 5.5 on a PC that has Windows 7 32-bit. It has Photoshop 12.1 installed. When I plug any USB camera into it, autoplay doesn't work. When I uninstall the Adobe Suite, autoplay works fine. I've changed autoplay settings in Windows and tried different cameras. No luck.
Is there a setting in the adobe suite that takes control of autoplay for cameras? Like I said, this only happens when I install photoshop. Once I remove it, autoplay works fine. Any help would be greatly appreciated.
Thanks,
Michael

Not that I know of, at least not in Photoshop (I don't have the whole suite). I have Photoshop 6.0, CS4, CS5, and CS6 on my Windows 7 workstation and I still get normal autoplay functionality when I plug my camera into a USB port.
One thing though... I normally disable a number of extraneous things Adobe installs (e.g., Switchboard, Service Manager, updaters, etc.) via Autoruns. I wonder if maybe I've avoided the problem you're seeing because I do that.
I'll be interested in seeing the resolution for this issue when you find it.
-Noel

Similar Messages

[BUG] Photoshop CS5 Extended 64-bit and the UAC

HI
Installing all the updates of the suite of Photoshop CS5 Extended 12.LS4 32-64 bit on Windows 7 Ultimate 64-bit, you must completely disable the UAC to start Photoshop CS5 Extended 64-bit. Why?
THANKS
BYE

That's a fair question. Mine's not broken and I have not had to reinstall it, so I can't answer from personal experience.
General advice: Make a good backup and set a restore point before trying any restorative activity.
Also search this forum for something like "registry permissions"... I seem to recall at least one thread in early to mid 2010 where someone identified parts of the registry on which to alter permissions to solve some problem or another.
-Noel

ITunes 64-bit and Windows 7 Ultimate 64-bit

I have a relatively new installation of Windows 7 Ultimate 64-bit and have not moved the "Music Folder" to a new location. I have moved the "My Documents" folder to a new location tho. Inside of the "My Documents" folder, I see folders named "My Albums" and "Music Lyrics", but no "Music" or "My Music".
After installing the 64-bit version of iTunes, I get the following error.
The folder "iTunes" cannot be found or created and is required.
The default location for this folder is inside the "Music" folder.
I have researched and seen many references to this error and Windows XP, but nothing for Windows 7.
Ideas?

Something may be awry with the special registry permissions on the My Music folder, Just. I think the iTunes installer looks for those in order to determine just where the default location of My Music is on a given computer.
But since this is a first-time install, the situation should be pretty simple to recover from.
Hold down the shift key when you go to launch iTunes. In the dialog box that comes up, select "Create library" and put the library where you please.
Probably a good idea after doing that to try launching iTunes again, just to make sure that it is still finding the iTunes folder. But by default, next time you open iTunes (after creating a new library), it should try to open the library in the location you created the library in.

Windows 7 Enterprise 32 bit and Windows Server 2012 64 bit successful dual boot.

Client Windows 7 Enterprise 32 bit SP1, Windows Server 2012 64 bit successfully install for dual boot. Even deleted Windows 7 Enterprise from msconfig, moved Windows Server 2012 partition, for dual boot installed Windows 8.1 64 bit (now posting from),
deleted Windows Server 2012 from msconfig, moved Windows 8.1 partition, just for knowledge.

Hi,
After referring to your post, I can understand you are trying to install 32 bit and 64 bit OS on same system. Are you trying to perform that? Here providing you thread link for detail.
dual boot windows 32 bit and 64 bit at same pc
Hope it helps to understand!
Regards.

Windows 7 64 bit and Warning page issue

I have several users that are in the process of testing Windows 7 64 bit that are reporting problems with repeatedly getting the Ironport warning page that you should get when accessing a website that is in a category that is set in the Warn category. We have the timer set that you only have to respond that page once every 30 days. The problem is that they are getting the warning page several times an hour or more. I am not seeing the same problem on Windows 7 32 bit so I am suspecting that this might be a 64 bit problem.
I have a TAC case open on this but havent been able to get much from the person assigned to the case. Wanted to see if anyone else had seen this problem. I have 7.1.0-297 for Web installed on my S370 that I am seeing the problem on.
Ron

Since I am using WCCP from my ASA to talk to the Ironport, I would think the answer is transparent. Bear with me if I dont use the right terminology. The person who designed/spec'd/installed the box is no longer with my company and I am learning this from scratch.
I have the user also testing from Windows 7 32 bit and havent seen a problem there as yet. Using IE as the browser. My next step is to login to the problem user machine and see if I can duplicate the problem. I am beginning to suspect that there might be something in the windows profile directory that might be contributing to and/or causing the problem.
Havent tested with another browser as IE is the mandated corporate standard.
Ron

Issues with creating PDF's (Acrobat 8.1.6. and 9.1.3) in Windows Server 2003 (32 bit) and Windows XP (64bit)

We have a report package that generates customised reports
We generate the PDF's by simply "printing" to the Adobe PDF printer
In Windows XP Pro (32 Bit) the report creates the PDF perfectly
In Windows Server 2003 (32 Bit) or Windows Xp Pro (64 Bit) the PDF is created 90% perfect but some of text has slipped on the page.
Whilst we are looking into the report writer (Dev Express) I would like to rule out any Acrobat issues.
With thanks
Mark

I think it will work fine if you use the "Enterprise" authentication option. It may have dependencies on 32 bit components. So, that's why we must run IIS in 32 bit mode even though it's on a 64 bit OS. That means CR supports 64 bit OS systems only if you bring down other components that CR uses to 32 bit levels. I'm not sure if that is considered "full support".
We are trying to use the LDAP authentication option, but that tab is disabled. Other tabs such as Active Directory and WinNT are disabled as well. There maybe another component that we must bring down to 32 bit processing.
Is there a way to enable the LDAP authentication configuration tab?
thanks

Tungsten T3 Hot Sync in Windows 7 Ultimate 64 bit and WIndows XP mode

I upgraded to Windows 7 Ultimate 64 bit and now my Palm T3 will not sync. I downloaded desktop 6.3, 4.1.4, and 4.1.4e. I tried all three in both windows 7 and windows XP mode which I am told is a 32 bit O/S but I'm really not sure. I have tried hot syncing in bluetooth in windows 7 the T3 and Laptop connect but it keeps telling me the port is in use by another program? Does anyone know what I have to do to get it to sync or am I doomed to throw my trusty T3 out? Any Ideas?
Post relates to: Tungsten T3
This question was solved.
View Solution.

Stan_R wrote:
link no longer works
You are correct, but you have pulled up a post that is over 3 years old!
If interested in syncing to a 64bit system, please view the sticky thread at the top of this section entitled "64bit Windows USB Drivers for Palm Desktop"...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Getting Error 08 when attempting to build exe using LabVIEW 2009 (32 bit) and Windows 7

Testing development platform on Window 7 vs XP. I received following message while building an executable using 2009 32 bit on Windows 7 machine. Same build will work on an XP machine.
Error 8 occurred at Copy in AB_Engine_Copy_Error_Files.vi->AB_Application.lvclass:Copy_Error_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File permission error. You do not have the correct permissions for the file.
=========================
NI-488: DMA hardware error detected.
C:\Program Files (x86)\National Instruments\Shared\LabVIEW Run-Time\2009\errors\Internet Toolkit-errors.txt
Any suggestions?
Thanks

For any who may be having this problem here is a little more information and what I did to get around the issue. (so far)
First I tried a simple vi with a while loop in a project and made an executable build. This worked. I double checked on an XP machine the project that I was having problems with. The executable was built successfully. I changed back to the Windows 7 machine. On the program compatibility trouble shooter I started the LabVIEW 2009 (32 bit) in the XP service pack 2 mode and selected run as administrator. The build was successful.
Note: was logged in as administrator and program would build a simple executable in Windows 7. The executable that would not build had more complex code that included serial communication and calls to lvanlys.dll and nilvaiu.dll.
This may not be a complete fix to the problem but at least in this one case it worked.

VPN Client and Windows 7 Issue

Using VPN Client, V5.0.07.0440 a Dell Vostro W7 Professional system, 64 bit. The client installs and runs the same way it has on at least 20 other systems without issue. When I try to remote into the network, I get a "can not connect" error attempting to connect to any system or server. I placed a known good laptop using XP on the same internet line, it connects without issue. The remote access (mstsc.exe) verson is 6.1.7601.17514 there is no Admin switch in the shortcut. This is the first time anything like this has happened, numerous W7 32 and 64 bit and XP systems. Any help greatly appreciated.
Thanks
It's like the VPN connects to the network, but the remote access is not using the same connection. I get the same results whether the VPN Client is loaded or not.
Sure could use some help on this.

The system that I am trying to connect with is a Dell Vostro desktop, W7 64bit Pro. I am attempting to connect to a Windows 2003 domain thru a PIX 501 firewall. The desktop system uses an onboard Ethernet adaptor connected to the Internet thru Charter. I do not have ready access to the computer as it's my employers home system. The frustrating thing is, I have installed and set this up on at least 30 other systems and all of them worked flawlessly. Of course, this one would be the problem as it belongs to my boss.
Thanks for responding, I plan on picking up the unit so I can devote some real time to fixing it.
Thanks again

New hard drive and Windows 7 issues

I bought a new 1 Tetra Samsung hard drive for my computer since 150GB was not enough. I did this because I need windows partitioned for school. After I installed the hard drive and inserted the Mac OS disk, it would not recognize the hard drive to install. Since then, I have read previous forums such as: https://discussions.apple.com/thread/3322843?start=0&tstart=0
Now, the issue is: I went ahead and installed my Windows XP SP2 because I could not get Mac OS to install. I have also downloaded the Windows 7 Professional update from Microsoft and have a Operating Disk on its way in the mail. I am having some issues with sound and camera and probably others that I don't know about yet, like my graphics card and such. What should I do?
1. Erase HD and install the Mac OS, because I do want this on my computer. Then download updates for Windows 7 bootcamp and reinstall Windows 7 when I get it in the mail.
or,
2. Is there a way to fix the driver issues that I am having without having to reinstall windows. I have not tried to partition yet and install mac.
I think it would be best to:
Install Mac OS
Download updates
Bootcamp and Install Windows 7
What do you think and do you have any advice as how I should go about this. Oh, btw, living in a PC world and coming home to my Macbook Pro 3,1 and realizing that it is not as functional is kinda disappointing.
So, I found this site for the sound: http://www.stuffedcow.net/macbook_audio
And: http://www.cirrus.com/en/products/cs4207.html
I am not sure how to go about installing a new driver. Do I download and save or do I run a certain .exe?
I found this post and was reading, but I am not certain about the right driver for the sound. If I erase the hard drive and install mac. Then, bootcamp and install windows, will I loose my wifi driver? Windows 7 should have that update, but according to this post, it may not.
https://discussions.apple.com/thread/2534313

If I were in your shoes I would want to understand why I couldn't install OSX on the internal drive before going any further. Without getting past that hurdle you may or may not be successful in your aims, but you are outside mainstream intended ways of running Bootcamp.
Just a couple of starters:-
1. Is your internal hard drive (samsung) formatted with a GUID partition table and HFS+ file system? All done in Disk Utility, booted from the Install disk.
2. The Apple Install disk (plus subsequent Apple Software Updates) has all the drivers Bootcamp needs, without having to find and download from elsewhere. I run Windows 7 64 bit on two Macs and have never had to go and find a driver. (Of course Windows does it automatically for me for other hardware). Sorry if this next point is insultingly obvious, but just to check that you know you can put the Apple Install Disk in while running Windows and Windows find the installer.
You don't say anything what your MBP is or what version of OSX you are running. I am not fully up to date with the inplications of Lion and Bootcamp drivers as there is no install disk. I believe 2011 MBPs won't run XP.
Your comment "Oh, btw, living in a PC world and coming home to my Macbook Pro 3,1 and realizing that it is not as functional is kinda disappointing" implies that you haven't had a Mac very long. Although Macs are easy to pick up and use, there is a LOT to learn about customisation and using it properly and getting the most out of them. I have a number of relatives who still use OSX "out of the box"....it's like driving a car in first gear, and complaining "this car doesn't go very fast". Not a perfect analogy as speed is not the issue here.
Sorry if some of this post is missing the target...just take on board the bits that apply.

Lion, Boot Camp and Windows 7 Issues

Couple of questions regarding Lion, Boot Camp and Windows 7... I never had issues with Snow Leopard and setting up Windows 7 on my iMac (expcept the dreaded black screen after restart, bu got that fixed)
Let me start off with my specs and then I will ask my questions:
iMac 27"
i7 Quad Core (1st gen)
16GB Ram
1TB HDD
OS X Lion (Fresh Install - Not Upgrade)
All updates for OS and iLife and other installed software:
Adobe Creative Suite CS5
MS Office 2011
Boot Camp 4.0
Window 7 Ultimate
Ok... here are my questions.
When I fixed my black screen issues after installing a fresh copy of Windows 7 - I had to install MacFUSE and Tuxera NTFS in order to delete the the stock ATI driver so the second rebot on the install of windows 7 would work and boot correctly. After rebotting into my mac side I now always get this message from Tuxera.
What does this mean? Now in the finder when looking at the computer drives.. It does not show the BOOTCAMP partition...
However, when I resart i can hold down the ALT key and get this menu:
I know this might seem strange to ask, but why are the Macintosh HD and the Recovery HD text smoothed and the Windows text not? Being a design I see the difference and it makes me wonder why this is. (It is almost like the BSOD icon apple used forwhen connecting with shared PCs)... Anyways, I can boot into windows when clicking this drive.
After getting to windows 7 it will not let me run updated. The OS is activated and I have even installed SP1 manually, but it always tells me that the Update service is not running. When in fact it is. I have checked it and it is set to start automatically. I have reset and shutdown my computer more than 10 times... I can't figure out what the issues are.
Overview:
Why do I get the Tuxera NTFS error?
Why can I see the boot camp partion when manually selecting it form startup, but it does not show in OS X
I can't get Windows to update? Any ideas?
Thanks for any help you can provide.

These various utilities like Tuxera are incompatible with Lion. Partly because MacFuse is incompatible. You need to remove them completely.
As for the Windows partition you might consider using Boot Camp Assistant to remove it. Then make a new partition and install Windows. Remember to use the Windows formatter to format the Windows partition NTFS.

Adobe acrobat pro 9 and windows 8 issues

Looking for help regarding adobe acrobat 9 and windows 8. I am unable to scan will not allow me to select devise (HP officejet pro 8500 wireless). Also unable to scan from HP device to PDF using HP solution center. Printing fine from other applications. Thank you.

lorrainetexas wrote:
Also unable to scan from HP device to PDF using HP solution center.
This means that your scanner software or driver is not correctly installed.

Dreamweaver CS3 and Windows 8 Issues

I have Dreamwever CS3 and Windows 8 and I keep getting errors that can only be resolved by closing down DW and losing the work I have processed so far. I happens mostly when I use extentions such as Webassaist Data Bridge. I have visited their forum but they advised me to checkout you trouble shooting service.
Please advise
tonytanner257

Hi,
If Dreamweaver is working fine without the extensions, I am not sure if we should be troubleshooting Dreamweaver. Just to be sure, Windows 8 is not a supported version for Dreamweaver CS3. It could possibly work, but wouldn't have been tested on Windows 8 as Adobe supports only the previous two versions of any software.
This is my best answer. You could wait for other experts for their opinion.
Thanks,
Preran

Network with XP (32 bit) and Windows 8.1(64 bit)

The HP printer F4280 is connected directly to the XP computer and via a wired modem network connection to the Windows 8.1 computer.
The XP computer gets perfect prints. The Windows 8.1 computer gets incomplete prints - the shaded stuff is printed, the plain print is missing.
I tried new drivers on each - the XP only accepts a 32 bit driver. I put a 64 bit driver on the Windows 8.1 computer - nothing improved the 8.1 prints.
What can I do??
This question was solved.
View Solution.

Actually the network setup we have works fine for most print jobs from the Widows 8.1 computer. The one case of difficulty involved an Adobe Readert file on my Widows 8.1 computer that failed to print fully on the HP printer on the other computer. I think Adobe Reader is the problem or the file set up by the site with the file I wanted to print.
Generally speaking the HP set up we have works well most of the time, even with Adobe Reader files. But that one file was a mess and caused my concern. I can live with it, I think!

Adobe Photoshop Elements 1.0.1 and Windows 8

Hello.
I am the proud owner of an original Adobe Photoshop Element 1.0.1 that I've been using with very much pleasure since the day I bought my Scanner/printer.
I've been using it on my Windows XP PCs, and then on my Windows Vista PCs, but I've recently acquired Windows 8, and installed it.
Now I'm trying to reinstall Adobe Photoshop Element, as I do usually, and I get a message indicating I "need Internet Explorer 4 or higher" to install.
Windows 8 Pro being preinstalled with IE10, I'm not sure what I can expect from that point.

Fix site display problems with Compatibility View - Microsoft Windows Help
Mylenium

Photoshop 12.1 32 bit and Windows 7 autoplay issue

Similar Messages

Maybe you are looking for