Photoshop 13 will not start

I know this is a common problem and I have tried all the solutions that I have found, such as uninstalling, reinstalling, renaming various folders/files etc but Photoshop Elements 13 will no longer start. The error message is: "Elements 13 Organiser has stopped working".
It used to work perfectly and I have no idea why it stopped!
I have managed to get 12 to run now (after a lot of installing uninstalling etc) but had to rebuild the catalogue, not a quick task.
Any ides anyone.

Thanks, Benjamin
All my drivers are up to date but, thanks to you, I have now added my query to the correct forum!
Best wishes.
John

Similar Messages

  • Photoshop CS4 will not Start

    Hi, i'm usually quite responsible when it comes to making sure my system can coap with what i am asking of it, but i've ran into a problem that my computer just can't seem to get around, and means that photoshop cs4 will not start up.
    I've been making .PAT files from a few pattern sourcebooks i've recently brought. The first two went fine, but a japanese sourcebook contained 250 reasonably hi-res pattern images which i put through an automated action which set them all as patterns for me for the Pattern Overlay option in beldning options. When i did this i noticed my computer started to slow down near the end of the process, so i saved out the .PAT file from them, and quit photoshop to free up over 2.10GB worth of data. I have 4GB on a 32bit XP, but only 2 and a half-ish is seen by windows due to the hardware installed aswell. Of course i plan to chnage this to 64bit soon, but anyway, when photoshop now is told to start up, it reads everything normally, then gets to "Reading Preferences", and crashes with an error report, which watching my task manager, i belive to be linked to memory shortage from having to load the patterns up.
    I reset my preferences to see if it would set them all back to default and not read the added pattern files, but that made no difference. Any ideas?
    Thanks in advance!!

    I'd look into doing a couple of tests:
    1.) Move those PAT files elsewhere
    2.) Eliminate all programs and Processes, that are unnecessary. Task Manager>Processes will give you a list of all that load, and you can probably stop half of them with no ill effects. I'd use MSCONFIG, so you can go back and easily activate them later.
    3.) Reboot and see what happens.
    Note: John's suggestion on the Presets folder might address #1, but I'd also physically Move them. It sounds like you're running totally out of resources to run PS, so Textures, and such, might be an issue too.
    A question: how are your Scratch Disks setup and please tell us about your I/O sub-system, i.e. the internal HDD's, their size, free space, speed, controller type and how these internal HDD's are allocated. Especially tell us if you have any physical HDD's partitioned.
    Good luck,
    Hunt

  • Photoshop CS5 will not start after Outlook

    If I start Outlook (Office 2007) as the first application after loading OS (Win 7 Ult, 64 bit), Photoshop CS5 will not open (message: "needs to close down). I then have to log off and in again and start Photoshop before Outlook to get it to work. I seem to remember having this kind of problem some years ago - but do not remember whats caused this problem. Is there anybody out there having the same kind of trouble? Or even better - the solution?

    Hmm... I have CS5 Master Collection, and MS Office 2007, and I have never had any problems opening ANY program, in ANY order
    My hardware and OS is linked here... http://forums.adobe.com/thread/652694?tstart=0 - you might want to post details in case someone is able to spot a problem based on more information

  • Photoshop CC will not start

    I recently added a dual monitor setup and now photoshop CC will not open. Here is my event log error
    Log Name:      Application
    Source:        Application Error
    Date:          4/30/2014 10:30:48 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      SDA4034845.asurite.ad.asu.edu
    Description:
    Faulting application name: Photoshop.exe, version: 14.2.1.570, time stamp: 0x52f4a1d7
    Faulting module name: Photoshop.exe, version: 14.2.1.570, time stamp: 0x52f4a1d7
    Exception code: 0xc0000005
    Fault offset: 0x00124f80
    Faulting process id: 0x2c4
    Faulting application start time: 0x01cf6499ebddd40f
    Faulting application path: C:\Program Files (x86)\Adobe\Adobe Photoshop CC\Photoshop.exe
    Faulting module path: C:\Program Files (x86)\Adobe\Adobe Photoshop CC\Photoshop.exe
    Report Id: 2a6cbe1a-d08d-11e3-baf6-d067e502481e
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-04-30T17:30:48.000000000Z" />
        <EventRecordID>21147</EventRecordID>
        <Channel>Application</Channel>
        <Computer>SDA4034845.asurite.ad.asu.edu</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Photoshop.exe</Data>
        <Data>14.2.1.570</Data>
        <Data>52f4a1d7</Data>
        <Data>Photoshop.exe</Data>
        <Data>14.2.1.570</Data>
        <Data>52f4a1d7</Data>
        <Data>c0000005</Data>
        <Data>00124f80</Data>
        <Data>2c4</Data>
        <Data>01cf6499ebddd40f</Data>
        <Data>C:\Program Files (x86)\Adobe\Adobe Photoshop CC\Photoshop.exe</Data>
        <Data>C:\Program Files (x86)\Adobe\Adobe Photoshop CC\Photoshop.exe</Data>
        <Data>2a6cbe1a-d08d-11e3-baf6-d067e502481e</Data>
      </EventData>
    </Event>

    You could try renaming or deleting the Adobe Photoshop CC Settings preferences folder.
    This page describes where to find that folder...
    Preference filenames and locations in Photoshop CC
    -Noel

  • My photoshop cc will not start up, it loads up but doesn't start. Open up task manager and it says its "not responding". Any help?

    Tried to open my Photoshop CC app but the app is not responding. App goes through the motions of loading but never opens. I've used the App before with no issues, this is my third month using the Creative Cloud. Any help would be useful, Thanks.

    Sign in, activation, or connection errors | CC, CS6, CS5.5
    For anything beyond that you will have to provide proper technical information like system specs, which you haven't done so far.
    Mylenium

  • Photoshop 11 will not start up

    I have Adobe Photoshop Elemments 11.  I insert the CD into the drive and nothing happens.  How do I install?

    Hi Phil,
    Make sure that the DVD drive is writable.
    Navigate to the DVD drive and open the Photoshop Elements 11 folder to locate the setup file. Please double click on this file so that the product would start the installation.
    Regards,
    Jairaj

  • Adobe starter edition has photo numbers by the picture such as DSCO0283.JPG , where can I find that number on the pictures in PHOTOSHOP ELEMENTS 12--reason being that photoshop elements will not convert my catalog to version 12. If i had that number I cou

    adobe starter edition has photo numbers by the picture such as DSCO0283.JPG , where can I find that number on the pictures in PHOTOSHOP ELEMENTS 12--reason being that photoshop elements will not convert my catalog to version 12. If i had that number I could manually rebuild my collections into the photoshop elements 12, but all that i see in photoshop elements is dates and i have multiple pictures from the same dates. HELP! I

    finally getting back to this project---adobe starter edition 3.2 is on a windows XP computer
    ADOBE PHOTOSHOP ELEMENTS 12 is on our Windows 8.1 computer.
    error messages--- had to give up trying to convert---I copied all our pictures to our windows 7 laptop and I installed adobe photoshop elements 12 (my bought program)
    I wanted to try to convert there first. also I copied our catalog to this computer also. Everything was working fine I could see the collections just as they where on the XP computer.
    then I tried to convert on the laptop. I believe the error said something about corrupt file, so I gave up that day. Next day I tried to open ADOBE STARTER EDITION 3.2  and it wanted an unlock code, no such code exists. and my copy of Elements 12 turned into a trial version which has expired. So I am a little hesitant to try to convert on the XP  computer and mess up the existing catalog,
    unless there is a fool proof way. I have tried manually making collections/ albums on Windows 8.1 and PHOTOSHOP ELEMENTS 12  and coping pictures into the new albums. sloooow!!
    I probably have about 4500 pictures and 150 collections/ albums to go. So any suggestions would be appreciated.

  • Organiziser in Photoshop Elements 9 will not start in Windows 8.1. Inkompartibelt programs.  What to

    Hej!
    Organiziser in Photoshop Elements 9 will not start in Windows 8.1. Inkompartibelt programs.
    What to do?
    /yoel

    Ok, I had many problems with the installation, but after three attempts I've got it working. This might work with a previously failed installation - but there are other guides in the forum to get this position -thanks also to the many threads on the this - which pointed me in the right direction
    Previously I'd had issues with Error 1935, (on Shared Technologies), Blue screens due to clbudf.sys from Cyberlink Instant burn which blue screened (thread abort exception) this install as also iTunes. (I haven't installed this now...
    My scenario. Win 7 (clean) -> Win 8 -> Win 8.1
    After setting up the setting up the system.
    I ensured the following : (although begrudingly) so I could do a system restore if needed.
    -I disabled Anitvirus & Firewall
    -enabled Volume Shadow Copy Service
    I then ensured I had downloaded Adobe Application Manager 8.0 (read this may help) - I installed - but I did not run it as I believe it updates to Adobe CC Manager( from previous attempts)
    i also downloaded and installed the 32 bit versions of :
    C++2008 redistributable (32 bit)
    C++2008 SP1 redistributable (32 bit)
    I installed Premiere Elements (64 bit) - note I had previously installed Sony Vegas 10 Platinum, which downloaded and installed NET 3.5/Net 2.0 adding to windows features, which many have helped - not sure.
    I installed Photoshop Elements (32 bit)
    I started both apps and updated them to 12.1.
    Happy ... finally - hope this helps others - or at least helps adobe improve their installer, diagnose the issue for others.

  • Photoshop Elements 12 will not start

    When I start elements 12 I receive the error message "Photoshop elements cannot start or continue because of missing file(s) Please reinstall" I have reinstalled the program twice and still get the same error. I have been using the program for a month with no problem and evrything else on my computer is working just fine. Thanks for any suggestions
    Richard

    Hi Brian,
    Thank you for the advice, I will keep that in mind.
    If I succeed, I will let you know.
    I am living in The Netherlands.
    Ineke
    Verstuurd vanaf mijn iPad
    Op 25 jun. 2014 om 19:29 heeft "Little_Pale_Face" <[email protected]> het volgende geschreven:
    I just bought Photoshop elements 12, installation was no problem, starting organizer is no problem, but editor will not start up. What do I do wrong ?
    created by Little_Pale_Face in Photoshop Elements - View the full discussion
    Hi,
    I meant create a new user account on your laptop. There are some settings that are stored on a per user basis so creating a new user may clear a setting.
    However, that may not help in your case - I have been trying to help someone else and got your two problems mixed up.
    The only reason that I had the editor fail before was resolved by running the disk cleanup and check tools.
    As you have returned the product, you could try installing the trial version. If you get it to work, then you may be able to buy a boxed version from Amazon or similar. I'm not sure where you are but the boxed version can often be on special offer from the big stores at a cheaper price.
    Brian
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6496317#6496317
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Photoshop elements 13 will not start editor

    photoshop elements 13 will not start editor. Application lets me open the organizer, but the editor never opens. No error is presented, application just closes. Attempted compatibility settings, still no luck. Any suggestions?

    mine won't even let me begin. I click on a picture and it immediately shuts down.... This is my first time to use it and I feel like a refund is in order. Why on earth won't it even let me start on a picture

  • I have a new laptop and want to instal photoshop elemets2.0.It will not start to instal. Why?

    I have a new latop, and want to instal an old version of Photoshop elements 2.0 that I have. It will not start the instal process. Why?

    It is probably because the software is too old to install/use on your new machine.  Look at the files on the disk and see if there are any there that you might try to use to initiate installation.

  • Photoshop CS5 will not open

    My photoshop CS5 will not open either from the desktop or from the program list. I can open Bridge but when I then try to view a photo in photoshop I get a message that says Bridge has stopped working and will have to close down.

    Please read below item and provide relevant information.
    http://forums.adobe.com/thread/419981?tstart=0
    Boilerplate-text:
    Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

  • Photoshop CS will not open after upgrade to OSX 10.4.3

    Photoshop CS will not open in my iBook after an upgrade from 10.3.9 to 10.4.4. Even when I reinstall, from a dmg file, it doesn't help. The error message says: “the app photoshop quit unexpectedly”
    My iBook, which boots in 10.3.9 still, has no problems with this same program.
    What are the conflicts with OSX 10.4.4?
    iBook G4, iMacDV   Mac OS X (10.4.3)  

    What do you mean by 'Install from a DMG file'
    Are you using the original installer disks? I have CS and it works fine in Tiger OSX 10.4.4.
    It could be a number of things, but installing from the original disks is a good start.
    Mark

  • Photoshop CS5 will not open raw files from Nikon D810. What do I need?

    Photoshop CS5 (bought in 2011) will not open raw files from Nikon D810 (bought in 2014). Is there a patch?  Is there something I can do? 

    YAY!!! Success. Thanks Jim.  I have the raw file for this image. ABC OPEN: Dancing water spouts in severe weather   I'm such a noob, I hadn't even set up the correct date on the camera.
    ABC OPEN: Dancing water spouts in severe weatherFran McFadzen captures a once in a lifetime photo of two dancing water spouts near Rockhampton.
    View on open.abc.net.au
    Preview by Yahoo
          From: JimHess <[email protected]>
    To: Fran McFadzen <[email protected]>
    Sent: Monday, 26 January 2015, 10:20
    Subject:  Photoshop CS5 will not open raw files from Nikon D810. What do I need?
    Photoshop CS5 will not open raw files from Nikon D810. What do I need?
    created by JimHess in Adobe Camera Raw - View the full discussionThank camera requires Camera Raw 8.6 which isn't compatible with Photoshop CS5. But you can download DNG converter 8.6 or newer and create digital negative (DNG) copies that will be compatible with Photoshop CS5. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7130665#7130665 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7130665#7130665 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Adobe Camera Raw by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Photoshop CC will not open.

    After working perfectly every day for months, Photoshop CC will not open.

    I am trying to open Photoshop CC.  It starts going throughout the start-up process, and then disappears.  This occurs when I try to open Photoshop CS4, as well.
    I am on a Mac Version 10.6.8,
    Processor 3.06 GHz Intel Core 2 Duo
    Memory:  4 GB 1067 MHz DDR3
    132.12 GB Free
    Chipset Model:          NVIDIA GeForce GT 130
    Error message:

Maybe you are looking for

  • Material description in FS10N Report.

    Hello All, We want to populate material description in the FS10N report. The field is available but text is not appearing for any transactions. Please provide your valuable inputs, thanks in advance. Regards, Ratnam

  • I am looking for HP Laserjet CM2320 MFP driver for OSX 10.8.1

    I have a LaserColor printer with all in one it is namely HP Color Laserjet CM2320nf MFP, once I upgraded my computer to the mountain lion OSX 10.8.1 I cannot scan any document, how can I go about this, any one help is appreciated. Thanks

  • Transporting Process Chain - error  Source system does not exist

    Hi, I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Ro

  • Error occurred during back-routing

    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIServer</SAP:Category><SAP:Code area="OUTBINDING">CO_TXT_ROUTING_BACK_ERROR</SAP:Code><SAP:P1>,FileNE

  • Performance issue in guest access anchored in DMZ

    Hello, I've been having performance issue in our wifi guest network anchored in the DMZ. I have 3-5508 anchor controllers behind the Checkpoint gaia firewall and have 24 guest SSIDs in here. Right now, only 14 guest SSIDs are enabled and tunnelled ou