PhotoShop 2.0 refuses to load properly

Why does my Adobe Photoshop program 2.0 refuse to load up and gives an error message personalization information incomplete . I've reloaded it filled out everything . It's older than E mail registration requires either Fax Phone or mail . How can I circumvent that portion of Reg. ?.

Noel,
There was a time, long ago, when Adobe had at least two "starter level" programs, PhotoDeluxe and also a Photoshop LE. The latter was more often seen bundled with a camera, a scanner, or similar. Think that my copy (never installed) came with an old Nikon scanner, but that WAS a long time ago. I believe that PhotoDeluxe was sold separately, but it might also have been included with some bundle. Though I never used it, I thought of it as more of an Image cataloging program, with limited Image-editing capabilities - not too far from the early versions of PSElements w/ its Organizer, but with a reduced set of editing capabilities, however, I might be wrong.
For less than professional needs, I agree that PSElements would be something that I would think about. It is bound to be much more full-featured, than PhotoDeluxe was, and PSE 11 will run with contemporary OS's. It is really not THAT far behind Photoshop, and the price is very good.
Hunt

Similar Messages

  • Firefox 3.6.9 updated to my computer this morning. Now eBay and yahoo are refusing to load properly, and I'm told it's 'incompatible' with AVG stop malicious sites or something like it - what to do?

    I think what loaded was a firefox for google pack. But I'm not sure about that. Tried to use Yahoo, it said to try to clear my browser, or clear my cookies, or several other suggestions I can't remember. My AVG something or other has been disabled because it is incompatible with whatever firefox loaded.
    Assistance would be appreciate. Go slowly. Use small words. Thanks.

    If AVG is blocking it then you need to contact AVG and ask them why that is happening.
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Photoshop Element 13  (Organizer cannot load properly  conflict in loading Catalog

    i Have installed the trial version of photoshop element 13 on Windows 8.2 64 bitts version with lots of memory available. The pse 13 worked fine until catalog size increased to 23 GIgabytes.
    Then system froze.
    Finally I purchase a full version hoping to cure the problem however the installation resulted in reloading the trial version with validation code given.
    The purchased version has the same problem and does not operate.
    It has to be noted that the editor works but as soon as I try to use the organizer the system fails. All the previous catalogues configured for PSE 13 had been removed to prevent the error.
    Any clue? Help would be appreciated.
    Jacques Lefebvre

    Hi,
    Please try out the following steps and see if it helps:
    1. While launching Organizer, keep Shift Key pressed.
    2. This will launch Catalog Manager dialog > Go for creating a New catalog
    3. Now if organizer launches, open preferences  (Ctrl+K) > Go to Files tab
    4. Uncheck following check boxes:
        Automatically Search for and Reconnect missing files
        Automatically generate thumbnails for video files
    5. Go to Media Analysis tab and un-check all the check boxes present there.
    If organizer work fine, please switch to your older catalog.
    Let us know if it helps.
    Thanks,
    Anwesha

  • Photoshop Elements 8 won't load properly

    When I activate the program I notice that the cursor is flicking between a + and the blue spinning Windows 7 circle.  Any change that I try to perform doesn't function....example...if I try to crop a photo, I can create the frame but it has no handles and will disappear if I try to enlarge it.  Has 8 run its course?

    The first thing to try when PSE goes weird is to re-build the Preferences:  Hold down your Ctrl+Alt+Shift keys when launching the Editor, and you'll get a prompt to delete the Preferences.  Answer "Yes", and the preferences will be re-built.  (If you don't see the prompt, minimize any PSE window to reveal the prompt window.)
    The spinning cursor when the Editor launches is normal -- PSE is checking a lot of things:  whether the most recently used files still exist, the plugins that are installed, etc.
    Ken

  • Ever since i downloaded OSX Mountain Lion, Express VPN no longer works properly for me. Even though it says I am connected, webpages refuse to load. However, everything works fine when its turned off. I cannot go on many websites without the VPN.

    Ever since i downloaded OSX Mountain Lion, Express VPN no longer works properly for me. Even though it says I am connected, webpages refuse to load. However, connection speed is fine when its turned off. I cannot go on many websites without the VPN. My current location is Shanghai, China. OSX Mountain was installed this morning and everything worked fine until then. Is Express VPN not supported? What do i need to do in order to get it working again on my Macbook Pro (early 2011). I want to be able to go on websites such as Youtube, Facebook, Twitter, ect...

    Hi,
    I am having the same issue listed above on my new Mac Mini i just bought, I also contacted Express VPN support and got the same instructions with exception of the command to run in the utilities terminal.  I tried the steps listed, and both commands (posted here, and sent to me directly by Express VPN support), and still unable to connect on my Mac Mini running OS X 10.8.2, but I am able to connect on my iPad and my MacBook which is running Mac OS X 10.6.8.  Usually Express VPN is spot on with their customer support, but this is taking longer to get resolved.  Here is the steps sent to me
    Try doing the following to see if the problem gets resolved:
    Please follow the instructions here: https://www.expressvpn.org/support/setting_dns_servers_mac_os
    (should still be the same for Lion) and then add the following DNS servers: 8.8.8.8 & 208.67.222.220. After adding the DNS servers, please do the following steps as well:
    Note: If you're connecting to your ISP via a PPPoE connection, then set the DNS servers on the PPPoE connection itself and then restart your computer for the DNS settings to take effect.
    1. Click on Applications
    2. Click on Utilities
    3. Click on Terminal
    4. Type the following command (without the quotes): "sudo killall -HUP mDNSResponder"
    5. Press enter and then try reconnecting to the VPN.
    If you're still unable to connect, please send us in the latest log files.
    Hope this helps. Let us know how it goes.

  • Photoshop refuses to load images.

    So upon getting a new hard drive for my Powerbook (the old one on which Photoshop ran well enough) I have reinstalled the Adobe Creative Suite 2. Everything seems to work, except for Photoshop which, despite any attempt, refuses to load any image file. It simply gives me this error whenever opening or scanning in an image.
    http://img122.imageshack.us/img122/6452/picture16wb.png
    Since I use Photoshop as my main program of things-to-do, I'm in quite a situation. I've tried an older version of Photoshop as well, CS and 7. They both returned the same error.
    Permissions are as correct as they can be, and OnyX has cleared up all my caches, optimized the system, and all that. Photoshop should run, why isn't it?
    Any help appreciated.

    Alright, so it sounds like you are all up-to-date, but that could be the issue here. Things really do change from update to update or upgrade to upgrade, so 3rd party software may not work correctly on it. Check Adobe's website and see if there is anything under PhotoShop that may fix this issue. Uninstalling and re-installing sometimes will do the trick. Also, have you trashed your preferences for it?
    -Jason

  • I just upgraded to dreamweaver cs5.5  and widget doesn't load properly ?

    I just upgraded to dreamweaver cs5.5  and the spry lightbox gallery widget doesn't load properly ? I drag and drop in design view. All my other adobe programmes are still cs3 flash photoshop etc is this why or what am I doing wrong as all i get on the page is a set of images vertically from the gallery template and no gallery layout? Can anyone help?

    Was my answer here http://forums.adobe.com/message/4339831#4339831 not good enough???
    Gramps

  • Iweb not loading properly to server?

    Hi I have used Dreamweaver in the past but decided to try iweb this time. I built a site www.southernlakestravel in iweb and have both published it to a local folder for safe-keeping and also to my webserver (2day.com) . I have also tried to ftp the site in dreamweaver. My problem is that all the fites load onto the server (whether published directly from iweb or via dreamweaver ftp) BUT I can almost never get the navigation bar to show up - just appears as a little dot on the top left side. I also note a lot of the images are not loading properly. If I resize them in photoshop to fit then it seems to be more secure. When I look at my files serverside and remoteside I have the folder name, the index file then the subfolder name with all the page files and a second index file and the script files. I notice that the script files include a js navigation menu. Is there a problem with the heirarchy of these files and whether the main index page can "pull these". Should the server be looking to document or root folder. I am at my wits end to know what to do. I can click on links between pages (click on activities in the above page and then go to some of the links shown), but basically the pages load without the iweb style navigation menu showing up at all and with many of the photos only half showing. Also, why does it become southernlakestravel/southernlakestravel?
    I am about to give up on iweb.
    Meg.

    You have the double domain name because the second one is your site name - you gave your site this name in iWeb and you can change it to something shorter and more suitable and then this won't happen.
    As you have seen, it is the way that iWeb works - when you publish to a local folder, iWeb produces a site folder with a separate index.html file - there is another index.html file inside the site folder itself so what you need to do is upload the site folder to the root folder and then you upload hte separate index file that will sit outside the site folder and point in towards it.
    The iWeb page template navigation menu is javascript based and sometimes if there is a black dot, this means that all the files are not being uploaded to the server correctly.
    It would suggest that you publish your site to a local folder and then view your site by opening the html pages and seeing if there is a problem there before you upload your site.
    i would then suggest that you then use something other than Dreamweaver to upload your site - download Cyberduck for free - this is a dedicated ftp programme and may be better than Dreamweaver for uploading. With Cyberduck, you can see exactly where everything is being uploaded to.
    In the end, if you really want to eliminate your site name, then you can - you just need to upload the contents and the contents only of your site folder.  This means that you will not need the extra index file - simply select all the contents of your site folder and upload these with the index file that is in there already.  If you do this your url will just be http://www.domain.com/page name.html without the site name at all.

  • IMovie refuses to load.

    It seems that whenever I try to open iMovie, the GUI refuses to load. I can see iMovie up in my tool bar and according to the computer, its running just fine. It might be just coincidence, but this happened right after I downloaded a software update. How should I go about fixing this problem?
    Message was edited by: Bennett the Sage

    Welcome to the  Discussion Forums.
    Is imovie up to date, have you installed ilife support 8.2, are your display preferences set properly for your display.

  • Refused to load project - nearly lost months & months of work

    I re-loaded the latest (and 22nd.) version of a DVD SP project that I have been working on for 9 months, as video was shot and included. I had worked on it only half an hour before. As it loaded I got "Sequence FIN-00000001 not found. Cannot proceed without it." I pressed DVD SP's Search button but it couldn't find it and DVD SP stopped the loading process and then quit. End of 9 months work!
    That file looks exactly like an FCE render file, but why was DVD SP wanting to use a render file? I tried to re-load earlier DVD SP projects, starting with the latest-but-one but they had the same fault. About 6 versions back I got a more helpful message: "Two Landscapes.mov" file is in an unsupported format. Can't proceed." I searched for this (I recognised it as a video file used by my DVD SP project) and it would not open (it gave an error message). So I re-exported it from FCE and could load my latest DVD SP project. Whew!
    What caused it was most likely this. I was doing an operation on the DVD SP project using the mouse and had slight finger trouble. A blank error message box appeared and sat there. I had to force quit DVD SP and then could not re-load the project. Whatever I did must have corrupted the movie file so that when DVD SP looked for it when loading my project it gave up. But there remain two questions:
    1. How could DVD SP corrupt a movie file? It was just sitting there ready to be included in the various assets required for the project. How did DVD SP have the ability to corrupt a movie file - it was simply looking for it to list it in the Assets window, not running it, least of all saving a corrupted version?;
    2. DVD SP should have been programmed by Apple to simply report that the asset was corrupted and continue to load the rest of the project. In such circumstances no good software should refuse to load, so causing the loss of hundreds or hours of work.
    A Black mark for Apple, to be added to the other Black Mark about photoshop files (ending in .psd) with transparency causing FCE to refuse to load any version of a PAL project with that file in it, so resulting in much loss of work - a bug which has been known to Apple for over a year, possibly two, and Apple has done nothing about it.
    I hope this will help anyone else getting this bug.

    As it loaded I got "Sequence FIN-00000001 not found. Cannot proceed without it."
    It sounds like you bought a reference movie into DVD SP from FCE and that the render file was either moved/deleted, which could also make the other message appear about unsupported .mov. The re-export took care of the issue it sounds like.
    That is one of the reasons I prefer exporting self contained from FC and then encode outside DVD SP, may be worth trying down the road, though it would be good if this type of thing did not totally trash a project like you mentioned.

  • HELP!! Homepage photos are not loading properly on mobile devices!!!

    Can anyone help me figure out why or how to fix images on homepages for mobile devices?
    www.modalight.com is the website we've been working on and everything loads properly on desktop browsers but once we try to load it onto an iOS or Android operating system for mobile devices, things seem to get messed up with just the bottom image. What we have been encountering is on the iPhone (most tested) the bottom image does not exist at all and we suspect the scrolling effect is not present but there is no way to actually tell since the image is not there and both backgrounds are white. On the Android phone (most tested) the scrolling effects on the bottom image are there but the bottom image blows up and you can only see the candy portion of the image.
    Also, when looking at the boxes in Muse there is a random imaginary box that we can't seem to get rid of. It will show up on mobile devices as well but when we get rid of all the surrounding boxes, the imaginary box disappears as well.
    Any ideas or solutions would be greatly appreciated.
    Thank you for your time.

    I still have my ancient Photoshop  6.0.1 copyright 1989-2001 installed, and when I use it, it prints o.k. (well, not beautiful, but looks like a photo ).  If I print through windows it's o.k. too, it's just PSE 10 that it's pixellated like that, which is why I think it must have something to do with PSE 10.  The black & white photo above that shows the pixels, is actually a photograph that I took of the printout.  What I did with the one below is to print it on paper, scan the printout to PDF, then opened the PDF in PSE10 and saved it as JPG then uploaded it here. so it is more "true"

  • Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.

    Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.

    1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
    If you've done something different then provide some more details about what is where and I should be able to help.
    2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
    3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
    4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
    tt2

  • On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". They are all registered. Help

    On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". Each device has been registered onto this account and this computer, and all have worked finely in the past. I am so confused as to why now seemingly without reason, none of our apple devices (one iPod, two iPhones) are allowed to have music and other material downloaded onto them. Also, as a side note, they still are charged by plugging them into the computer, however they do not even show up on the left-hand sidebar in iTunes.
    It should also be noted that for my iPhone it does not allow for the new update software to be uploaded; it just says that an error has occurred, nothing more.

    Try Here  >  AMDS  >  http://support.apple.com/kb/TS1567

  • Websites won't load properly

    Hi
    After just fixing my wifi problem (http://discussions.apple.com/thread.jspa?threadID=1345209) I am able to access the internet but I have a problems loading pages from some websites. The browser will say that I have loaded the page fully, but none of the flash, javascript, or backgrounds will load. Some pictures, but not most of them would load. The page is a white background with text and links and a couple small pictures. The text is a default font and only the links are a color other than black. Most sites will work, but a few big one's won't.
    Some sites that won't work:
    youtube.com (This wasn't working and then it worked for about three days and now it's not working again. It worked on all of the other computers in the house, mac or windows.)
    facebook.com (This won't load on any of the mac computers in the house, but will work on our windows laptop.)
    flickr.com
    Sites that do work:
    Google.com
    apple.com
    pretty much anything else.
    This problem persists on both Firefox and Safari. I have tried restarting the computer, deleting the preference (.plist) files for both browsers, checking my firewall settings, and nothing has worked.
    Does someone know what is wrong?
    Cameron

    I still haven't resolved this problem. Here is some more information...
    youtube is the only website that has started working, but it sometimes stops working again.
    There are many other sites that don't work, cnn.com, washingtonpost.com (sometimes), and a lot of others.
    I have contacted our internet service provider and they said that they had nothing to do with the problem.
    Some websites will not work at all. Safari tells me that it can't find the server. Some that do this are ups.com, computerworld.com, and others.
    I think that the problem is that, for some reason, our mac computers can't access certain servers where we are. (We are at a small ski resort (on the mountain) in Canada.) I think this because when a site doesn't load properly there are several errors and they are all "can't find host" errors from a couple of the same sites (ex. example.something.something).
    *Also, I ran a test on speedtest.net on the laptop and one of our iMacs and the results were way faster than anything actually loads/downloads or than the activity monitor shows, even when checking the activity monitor at the same time as running the test.

  • My computer restarted automatically, and since then, Firefox refuses to load, it crashes instantly as I try to open it, I cannot access any of its options that way. What can I do?

    Last night, as I was asleep, my computer restarted automatically, most likely due to an update of some sort. Usually, that is not a problem, as everything works just fine afterwards. HOWEVER, this time, it was not the case. Since it restarted, Firefox (3.6) refuses to start properly, and crashes immediately.
    I can see the white page popping up for a split second before getting a message saying that it crashed, and that I should send a report. I tried looking at the help FAQs on this website, about how I should be able to get a code for that specific crash's details. The problem is, however, that my last submitted report, according to my computer, is in june 2010, and we're currently in september 2010.
    I still tried to refresh after the report has been completed, but nothing. So I figured I'd try to check in the details of that latest report, but 'lo and behold, it doesn't work, even though I followed the explanations provided on this website perfectly.
    I did try to restart my computer again, and even download the latest Firefox version again, and reinstall it (even though that's what I had), but to no avail. It still does the same thing.
    At the moment, I am using explorer, and would very much like to be able to use Firefox again, as I have most of my bookmarks in there and usually prefer to use Firefox, although I've been having other issues with it lately. I don't think they're related to the constant crashes, but if you insist on me sharing those, then I shall do so.

    Can you start Firefox in [[Safe mode]] ?
    You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can initially skip the step to create a new profile, that may not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Maybe you are looking for