PHOTOSHOP 2014 Text input does not give me a live type layer. It gives me a selection of the type outline. Is this a bug?
It isn't 100% of the time, but when I use the Type tool and leave the tool, I am left with a selection of the type outline.
What is going on?
OOPS! Never mind! I had the tool set to outline. Blush!
Similar Messages
-
Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?
Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off. -
Css to style text input does not work
Hi,
I have a very simple form which contains one text field.
<form method="POST" action="">
<table width="100px" style="margin-left:auto;margin-right:auto" border=1>
<tr>
<td class="label">username</label></td>
</tr>
<tr>
<td><input style="width:50px" type="text" name="username" /></td>
</tr>
</table>
</form>
In the real code of course I have a proper style sheet instead of embedding 'style' in the input, but doesn't matter how I tried, the text field sticks to '161px'. I searched for text '161px' in all css files only found it under emulator.css padding, which is of course not used in my case.
I tried in a plain html and the above code works. I know that this input style is defined somewhere in the hirachy which I was not able to override, any idea how to overide CQ's input style?
Thanks!In CQ you just need to include form component and inside the form add text component. When you double click text component it will provide you with the option to add styling and specify width. Which takes precendence. Not sure why you building the entire html page.
-
Photoshop and Bridge CS5 does not auto rotate SOME images.
Photoshop and Bridge CS5 does not rotate SOME of my vertical images. Most other photos taken in the same time frame and with the same camera display perfectly.
Orientation is checked for display under Preferences, Metadata, Camera Data.
There also seems to be a discrepancy how Orientation is described under Metadata for those images which DO auto rotate : sometimes it is -90 (which is how I hold the camera for verticals and which displays on most verticals) and sometimes it is "normal" even when it has auto rotated the image. I do not understand this difference.
"Normal" is also used to describe the orientation of those images which DO NOT auto rotate for viewing.
The photos in questions were taken using a Nikon D-300 which is programmed to indicate the orientation of the camera and has always been programmed to do so.
I know I can manually change the orientation but we are talking about hundreds of images (I have over 10,000 photos in all; most of which display fine).
What should I be looking for to explain and correct this issue?
I appreciate anything you can do to help. Thank you.Thanks for responding to my query. I'll check out the thumbnail size.
It is just so curious that 90% of the verticals auto rotate and the rest do not. The ones that do not rotate are even from different years (other images in those years work fine), although all taken with the same camera. -
Text box does not display the date??
I have a text box <input type="TEXT" name="invoiceDate" readonly></input>. I select the date using datepicker .The date gets displayed in the text box.Then i click on "Show" button which loads the same jsp page again.
When the page is loaded the text box does not show the date.
I try to save the date in the text box as
<% String date1=request.getParameter("invoiceDate");
<input type="hidden" name="date1" value="<%=date1 %>">
<%>
The value is saved in this hidden variable..
Plz help me what to do next
ThanksIts a hidden field and that's why it isnt displayed.
Use
<input type="text" name="date1" value="<%=date1 %>"> ram. -
i am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.
download the 64bit installer,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Go - Connect to Server does NOT work - The text entered does not appear to
Two Macs with Mac OS X 10.5.2. Both migrated from Mac OS X 10.4.11. One Mactel and one PowerPC. I can see the former from the latter, but not the latter from the former:
Go/Connect to Server
gives this error all the time for all listed servers:
The text entered does not appear to be a recognized URL format
This does not help:
Mac OS X 10.5: "The text entered does not appear to be a recognized URL format" alert when connecting to server
http://docs.info.apple.com/article.html?artnum=307256
Any idea how to fix it? Thanks.At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, boot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
I'd do it on all of them.
Then we can go on from there if you still have a problem, but with several queastions eliminated! -
I want to download adobe photoshop elements 11 but does not work?
I want to download adobe photoshop elements 11 but does not work?
download here,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
en
I´ll check the messages. Elements 4.0.
Peter
9 dec 2014 kl. 18.44 skrev Jeff A Wright:
I have an I-mac with Max OS X vers. 10.6.8. Have tried to install both an old Photoshop 7.0 and an Photoshop Elements but it does not work. 7.0 I bought many years ago end the Elements came with a Canon scanner. What to do? Regards Peter Lindgren
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Peter Lindgren do you receive any specific error messages when you attempt to install Photoshop 7 or Photoshop Elements? What version of Photoshop Elements are you installing?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6999366#6999366 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6999366#6999366
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???
I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.
-
i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this
Try downloading the trial. It ought to detect that you have a 64-bit system.
You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it. -
Unable to install photoshop elements 13 on new computer (Windows 8.1 OS). Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html -
When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA
You can try downloading the 64 bit version. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html -
Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the features on the left side.
Hi Nealeh
Thanks i think I got it working of a fashion.
Except the replace colour, does not seem to end up with the colour I picked using the picker tool. Its as though it hads not replaced the colour but blended in the desired colour with the old incorrect colour!
Buy trial and error picking not the right colour but close - which when mixed with the existing colour is close.
Sorry I can't post the pictures as the Lingerie Mfg, has me under non disclosure.
The scenario is:- say a blonded mainly tanned model a high cut [at the hips] corsette style basque, with an ultra low bra line.
Our dear model, has just come back from St Barts with a fabulous Tan, and equally striking bold Tan lines!.
So we have great tanned legs, then the 'porcelain white band' where her swimsuit was.
Likewise we have a tanned face, and arms, shoulders etc and a great tan on the top of the cleavage, then it stops, white band to the top of the ultralow cut bra line of the basque.
She must have lived in like the most conservative bikini on the planet [50's style], for 2 weeks!
Had she had a normal skimpy bikini on, no problem!
If i don't solve it, she will get fired!
Not a lack of interest in your post, but I was out, and tried to log in to this site; which I could do, on my iPad Air / 5 [whatever its the new one]. And tried to 'sign in' - but it just hung at the
"Join Adobe Community" adobe sign in splash screen! with he little whell spinning around continuously!!!
I have Safari on this iPad. Guess that is all it runs.
So technology is not my friend today! -
Photoshop cc 64 bits does not start anymore
Since yesterday my photoshop CC 64 bits does not start aymore with an error message like "the internal file signature is incorrect." (it is a translation I use the French version).
My photoshop cc 32 bits works still fine.
I have the version 14.1.1 of Photoshop that has been installed a few days ago automatically by Adobe Updater.
Since that day I had not used Photoshop so I guess it is this update that has corrupted something.
I am a new user of photoshop on a fresh new Windows 8 PC and I have not yet installed any additional plugin to it.That sounds like the installation has been corrupted on disk.
Uninstalling the app, reinstalling, and re-updating is your best bet.
Maybe you are looking for
-
Replace DVI cable for 20in Cinema Display
Need to replace the DVI portion on the power/connector coming from the back of the display. It was ripped out when someone attempted to steal. Is this possible or do I have to buy another monitor?
-
How to I get photos from iPad into LR mobile
CCan I bring photos from the photo section of iPad into LR mobile, on same iPad ? Thanks
-
Hi, I have to navigate to WEB GUi on click of a button. The screen size should be a full screen. How can I achieve this irrespective of any screen resolution of the PC. Following is the BSP Javascript code. Can anyone suggest, how to approach? <thtml
-
Point-to-Site disconnect every few minutes
Hi, I'm using Azure vNet Point-to-Site feature and I can connect from an on-premise server to my Azure Gateway and to a Web Role located in my vNet. My problem is that the VPN connection get's dropped at irregular intervals (after 3, 6, 12, 20, 21 mi
-
Hi, I have a requirement where I need to do a MINUS operation on two SQL queries. How do I implement this in the ODI Designer?