Photoshop 64-bit Vista

Is Photoshop going to have support for 64-bit system ?

John,
Ok here is where I am confused. I purchased Photoshop CS4 and have been running with it for some time. I had thought it was 64bit.
However, this morning I ran Everest (that reports on just about anything running or installed (software/hardware)on the system).
It listed all the software and it showed Photoshop as 32 bit. It clearly separates the 64 bit and 32 bit applications. For example, I drive many Photoshop CS4 commands using DragonNaturallySpeaking V10.1 (Vista 64 bit) voice recognition. Everest shows Dragon as a 64 bit program and Photoshop as a 32 bit program.
As previously mentioned, I had thought CS4 was 64 bit but when I saw Everest reporting it as 32 bit, that got me searching for info on this. And then I made the blunder that I posted earlier.
I am not sure if you are familiar with Everest (I would not doubt it as you seem to be very computer savy), but how can I ascertain for sure I have a 64 bit version of Photoshop CS4? I know, I know from what you say Photoshop CS4 is 64 bit, but Everest is a pretty comprehensive program and I just cannot understand how it would miss interpret a program's 32 or 64 bit archtecture.
Bob

Similar Messages

Should I install both 64 and 32 bit photoshop on my Vista 64 bit?

Should I install both 64 and 32 bit photoshop on my Vista 64 bit?

Some plug-ins require the 32-bit version. If you are going to just use it as is, no plug-ins for devices, then th 64-bit version should be fine.

Photoshop CS4 on Vista not seeing 4 gigs of RAM

I am running Photoshop as part of the CS4 Suite on a bootcamped intel mac pro towers using Vista Business with 4 gigs of Memory. We are running in 32 bit mode because of the Apple screw up with Carbon 64 so that both sides of the house windows and mac match.
Photoshop is currently only seeing 1639 MB of the RAM instead of the performance on the Mac of about 3000 MB
So does anyone know what is going on here and how I can get Photoshop and or Vista to recognize most if not all of the RAM installed on these machines.
Specs are below...
Adobe Photoshop Version: 11.0 (11.0x20080919 [20080919.r.488 2008/09/19:02:00:00 cutoff; r branch])
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:6 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 4
Processor speed: 2793 MHz
Video Card: NVIDIA GeForce 8800 GT
Video Mode: 1680 x 1050 x 4294967296 colors
Video Card Driver: nvd3dum.dll,nvwgf2um.dll
Driver Version: 7.15.11.8048
Built-in memory: 2037 MB
Free memory: 1178 MB
Memory available to Photoshop: 1640 MB
Memory used by Photoshop: 55 %
Image cache levels: 4
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS4\
Temporary file path: C:\Users\MGD\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 349.4G, 324.0G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS4\Plug-ins\
Additional Plug-ins folder: not set

While Jim's suggestion is the only solution to addressing all your system's memory, I am surprised you only have 2037 MB (built-in) memory. Perhaps you are running processes or have devices attached which are eating into your memory by as much as .5 MBs?
I also have 4GBs installed ram. Right off the top, Windows strips 1 GIG to reserve space for Video Cards and other devices. I lose another .5 MB to the system.
This is a well-known limitation of 32-bit systems and like Jim says, there is little to be done except to upgrade to Vista 64. You can remove devices and stop processes and services, but you'll not ever see . . . at very best . . . 3.5 GBs. (Well, you might by using the /PAE switch, but that is more risk than I'm willing to play with.)
This is what my system looks like:
Operating System: Windows Vista (Ultimate) 32-bit
Version: 6.0 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 4
Processor speed: 3666 MHz
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 280/PCI/SSE2
OpenGL Drawing: Enabled.
Video Card: NVIDIA GeForce GTX 280
Video Mode: 1920 x 1200 x 4294967296 colors
Video Card Driver: nvd3dum.dll,nvwgf2um.dll
Driver Version: 7.15.11.7740
Built-in memory: 2557 MB
Free memory: 1281 MB
Memory available to Photoshop: 1640 MB
Memory used by Photoshop: 60 %
Image cache levels: 4
Thus far, I've not encountered any problem using a 32-bit version. That is partly because I've not done anything with PS or other applications which might cause problems. But, as I do more with the Master Suite I expect that situation to change. Then, I'll upgrade to Vista 64.
I'm kinda keeping my eyes and ears open about Windows 7. Unless I encounter performance problems, I'd rather wait for the next version. According to rumors, the earliest date would be the end of the year, if not early 2010.

Sync File Corruption with 64-bit Vista/iTunes

I'm getting some file corruption problems when trying to sync my new 16GB iPhone with the latest 64-bit iTunes (7.6.0.29). "yes I have the 64-bit version".
The sync seems to go correctly, but I have yet to be able to play any videos all the way through. Videos purchased from iTunes as well as self encoded files. All said files were working on my 60GB iPod Video with previous versions of iTunes on the same 64-bit Vista machine.
The videos will start playing fine, but will eventually reach a point in the file that was corrupted during transfer, the audio will drop out and the video will distort, then it exits from the video as if it reached the end of the file. No error messages or anything. If I play the file again, it will do the same thing at the exact same spot, so its a problem in the file. Now, if I remove the file and add it back, the file still has the same problem, but in a different location, which means the source is fine, but the copy to the device during the sync is the issue.
To test, I synced the exact same content from my notebook which is 32-bit XP, and zero problems. So I'm currently just using my notebook for syncing at the moment.
Anyone else with 64-bit Vista have a similar issue?

Hello
I have a couple troubleshooting steps I would like you to try. I myself do not have a 64 bit Vista so I can not test this to confirm if the same issue occurs or not.
1. Attempt to Sync content using each of the USB Ports. See if all USB Ports pose the same issue with the video. Or if you found when where it does not occur.
2. Test on a new user on the Vista Machine. If possible take at least one or 2 movies and copy them onto a flash drive or something. And bring them into iTunes on a new user account. You may need to Authorize that user and De-authorize when your done. Does the same issue occur?
3. If you perform a reboot on the iPhone, Then Sync Data over. Does the same issue occur?
4. If possible could you restore the iPhone. Then Re-sync and see if same issue occurs.
5. Is this happening with all videos? or only certain ones? Does the corruption occur at the same time frame every time? If so is it the same time frame for all videos or slightly different?
6. Perform an Uninstall and Reinstall of iTunes on your system, See if same issue occurs.
Let us know how it goes.

How To Get Ipod Touch 2nd Gen to work with 64 bit Vista / Vista Ultimate

Okay, so I just got me a 2nd Gen Ipod Touch for X-Mas..I decided to take a break and get this puppy installed on my HP Tablet. Like many of you, I struggled in frustrations. I hate Apple Support. Notice their method to resolve all of their issues in regards to Itunes not working or Touch not working is to just REINSTALL ITUNES....doesnt solve anything. I have a solution.
For many of you, this may work, for those that are experiencing the same problem, please read below.
What I am using:
HP Tablet TX1000
Platform: Windows Vista - Ultimate 64 Bit.
I downloaded the 64 bit version of Itunes 8.02...hoping the thing will work, and still after plugging in my brand new ipod... i get an error message saying.
"The IPOD you are using is not recognized by this version of Itunes, please delete and reinstall with 64 bit version of Itunes."
However I did install the 64 bit version of ITUNES on my Vista. Before you guys delete and reinstall again. Do this first to confirm that my solution will help.
Open up Itunes, go to help, click on Run Diagnostics. Select only, Ipod/Iphone Connectivity tests and hit next.
If your Apple Mobile Device Service is RED, it means its not installed or not activated. Please read apple forums for the reactivation of AMDS. *If you are like me and did that help, and realized its not installed,* something on vista is preventing the install.
Do the following.
1) Delete ITUNES Completely. When asked for a restart, click No.
2) Go to the C:\Program Files\Common Files and look for the Apple Folder and delete that puppy too.
3) Redownload the 64 bit Installed and save to your desktop. You will need this later. DONT INSTALL NOW.
4) Go to the Start/Circle Menu and on the bottom, type RUN in the Search and select the Run Program.
4) Type msconfig and hit enter.
5) When the Program pops up, in the General, DE-select normal startup and select. SELECTIVE START UP. and deselect/leave blank START UP ITEMS
6) Move over to the Start Up Tab, DESELECT ANY VIRUS SCAN PROGRAM You Have Running.
7) Click Apply then OKAY, and Exit that window.
8) Now RESTART your computer.
9) Reinstall ITUNES as done before.
10) Go to HELP...run the diagnostics as before and your Apple Mobile Device should be green Now.
11) Close that window. Connect your IPOD.
12) iTUNES should now recognize your IPOD.
After it works. Go back to MSCONFIG...and on General, put Normal Start Up. Click Okay. Restart.
Hope that works.
If IPOD is still not recognized, then its a driver issue and I dont know.
The problem I was having was due to Apple Mobile Device Services not being installed.
Sincerely,
Dr. SkiLLz. M.D.

This is an Answer for a Possible Solution. It worked for me and is still working. The issue I was having with my 64 bit vista, was Apple Mobile Device Service was not being installed, I dont know why. But I disabled any active running program through MSCONFIG, to allow a clean uninterrupted install of ITUNES 8.02. This allowed AMDS and drives from ITUNES to install. Hope this works for most of you.
APPLE, please review your Support Methods. Re-installing doesnt help an issue that resulted from installing.

Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

There is an issue with the 64 bit Vista, Windows 7 and Windows 8 or 8.1 drivers that causes the spooler to crash with the following HP Deskjet printers:
Deskjet 710
Deskjet 712
Deskjet 720
Deskjet 722
Deskjet 810
Deskjet 812
Deskjet 820
Deskjet 822
Deskjet 1000
The attached file contains a patch for this issue for Vista and Windows 7.
[The patch does not currently work for Windows 8 or 8.1 x64 systems. There are some efforts to address this, if a solution is developed it will be posted here. {Edit - I have not made any progress in getting the patch to work in Windows 8 x64.}]
First make sure the driver for the printer is installed. If the driver has not been installed go to Start, Devices and Printers, Add a Printer, Local Printer, choose the proper port (for USB-Parallel converters the port will likely be USB001: or perhaps USB002: ), Next, click Windows Update then choose HP for the manufacturer and select the appropriate printer.
Apply the patch as follows: Log into the computer with an administrative account. Download the patch by clicking on this link or on the paper clip at the end of this post. Save the patch file to your computer, then unzip it. Next copy the three DLL files to the following directory: %windir%\system32\spool\drivers\x64\3
Note that %windir% is a system variable that points to the location of the Windows directory. For most systems this will be C:\Windows. You can click Start, Computer and type %windir%\system32\spool\drivers\x64\3 in the address bar and it will find the right place.
This can be done from a DOS prompt if DOS is opened with the "run as administrator" command, or from explorer with a copy and paste. Depending on your UAC settings you may need to provide confirmation. Also allow the current files to be overwritten if prompted.
This patch is not required and should not applied to a 32 bit version of Vista or Windows 7.
Thanks to extraordinary Microsoft engineer Alan Morris for guidance for the patch.
Update - the following are more detailed installation instructions:
Download the patch from here. Now click on the file and open it, then extract the patch to some directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative DOS prompt by clicking on Start, All Programs, Accessories, then right click on CMD.EXE and select Run as Administrator. Click in the DOS box then type the following:
MD c:\temp
CD \temp
Now extract the patch files into the c:\temp directory (extract all, chose c:\temp as the destination).
[Update - Windows security settings may prevent these files from being used, please open Computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties. If there is a message in Properties indicating the file was downloaded from the internet and may be blocked then unblock the file before proceeding.]
Next click back in the administrative DOS prompt and type the following: (stuff in green is comments, do not type them...)
DIR *.dll (this is just to verify the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others.)
Net stop spooler (makes sure the files are not in use.)
Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)
Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)
Copy hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000)
Net Start Spooler
Exit
[Edit - note that these DLL files will already be in the directory. You will get a warning asking if it is OK to overwrite the files, say "yes".]
At this point the patch is installed and ready to print.
Note that the printers here do not support USB connections, they have only parallel ports. [Edit - if your printer does have a parallel port use it, this will likely be much less problematic than using a USB-Parallel converter.] If you use a USB-parallel converter make sure it is supported in your operating system. The following posts are flagged with USB-parallel cables that are reported to work in Windows 7.   A driver is required for the USB-parallel converter in addition to the driver for the printer. For supported converters this is typically supplied automatically in Windows 7. Note: the proper port to select for the USB-Parallel converters is often USB001:. I have heard of some cases where the port was USB002: or LPT3: as well. If the port you are using does not succeed (after applying the patch) try changing the port by going to Start, Devices and Printers, right click on your printer and select Printer Properties, then click on the Ports tab.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
This question was solved.
View Solution.
Attachments:
DJ_Patch.zip ‏34 KB

Just want to send a thanks. Purchased a new HP computer with 64 bit Windows 7 and haven't been able to get my 722c to work. This patch worked like a charm!

How can I wirelessly print from a 64-bit Windows 7 laptop to a printer on a 32-bit Vista laptop?

My DeskJet 722c is connected to my 32-bit Vista computer. I would like to print documents out on the printer from my 64-bit HP ProBook S-series laptop, which is running on Windows 7. I can do this if I disconnect the printer from the 32-bit computer running on Vista and connect it to the computer running Windows 7. But I don't want to go through the hassel. How do I connect to the printer from my Windows 7 computer, going through my Local Area Network? Do I need to install a Windows 7 driver on my Vista machine? Do I need to install a driver for Vista on my Windows 7 machine? If so, how do I do this? I'm confused

Hello-
I don't think your printer has network ability.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
Donald

How to install Photoshop on Windows Vista ??

How do I install Photoshop on Windows Vista ???

Hi Jesse,
Welcome to Adobe Community.
Please check the mentioned link to confirm if your system is compatible with Photoshop or not.Although Vista is not compatible with Photoshop CC but previous versions may work .
Tech specs :: http://www.adobe.com/in/products/photoshop/tech-specs.html
If you are using a previous version of PS , please use the download link/DVD available with you .
Regards,
Kartikay Sharma

Photoshop CS2 und Vista

Arbeiten mit Photoshop CS2 unter Windows Vista.

Hi,
bei mir funktionierte Photoshop CS2 einwandfrei unter Vista, bis heute. Vista installierte einige Sicherheitsupdates und danach wollte ich Photoshop starten. Auf einmal sagt mir das Programm, dass es eine Aktivierung benötigen würde und dass eine Aktivierung über das Netz ausgeschlossen sei.
Ich musste also telefonisch aktivieren. Nachdem die Nummer weder einen Anruf von One, A1 noch Bob akzeptierte, musste ich vom festnetz anrufen. Glücklicherweise fand ich noch einen Haushalt, in dem es Festnetz gibt.
Nachdem der Computer meine Eingabe des Keys nicht packte wurde ich zu einem Mitarbeiter weiterverbunden, bei dem ich erstmal meinen Unmut verkündete. Dieser schien jedoch eigentlich nur überrascht, dass Photoshop CS2 unter Vista überhaupt funktioniert. Nach der Eingabe des erhaltenen Aktivierungsschlüssel funktioniert mein Photoshop jedenfalls wieder, vielleicht aber nur, bis zum nächsten Vista-Update.
Die Empfehlung von Adobe dazu: Ich solle doch einfach mein Produkt mindestens auf CS3 updaten, damit es keine Probleme mit Vista gäbe...
Servus, Michael

I have 64 bit Vista Home Premium. I need to download Flash in order to use Premier Pro CS4. Please help me so I can use your program.

Dear Folks:
I have the trial version of Adobe Premier Pro CS4, and I have 64 bit Vista Home Premium. I can not download Flash in order to view the Help Program Tutorial. I am a student at CCBC Essex Campus, and I need to assemble a three minute video for a class. I have Internet Explorer (latest version), and I also have Firefox. Please help me with a solution.
Thank You,
Dan Pasten
111 Alcock Road
Essex, Md. 21221-2110
United States of America
(410) 686-8067

For easy searching, download the product user guide PDF(s)
The individual CS5 pages also have links to the earlier user guide pages
CS5 User Guides - online and PDF (right click PDF link to save PDF to your hard drive)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html
Some tutorial links... these MAY not apply to CS4, but it doesn't cost to look
http://forums.adobe.com/thread/913334
http://forums.adobe.com/thread/845731
-and http://forums.adobe.com/message/3234794
Encore http://tv.adobe.com/show/learn-encore-cs4/
A "crash course" http://forums.adobe.com/thread/761834
A Video Primer for Premiere http://forums.adobe.com/thread/498251
Premiere Tutorials http://forums.adobe.com/thread/424009
PPro Wiki http://premierepro.wikia.com/wiki/Adobe_Premiere_Pro_Wiki
Tutorial http://www.tutorialized.com/tutorials/Premiere/1
Tutorial http://www.dvxuser.com/V6/forumdisplay.php?f=21
Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html
Exporting to DVD http://help.adobe.com/en_US/premierepro/cs/using/WS3E252E59-6BE5-4668-A12E-4ED0348C3FDBa.h tml
And http://help.adobe.com/en_US/premierepro/cs/using/WSCDE15B03-1236-483f-BBD4-263E77B445B9.ht ml
Color correction http://forums.adobe.com/thread/892861
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935
After Effects Tutorials http://www.videocopilot.net/
Authoring http://www.videocopilot.net/tutorials/dvd_authoring/
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
And more Encore http://library.creativecow.net/articles/devis_andrew/
Surround Sound http://forums.adobe.com/thread/517372
Regions and NTSC vs PAL http://forums.adobe.com/thread/951042

64 Bit Vista Error Message: Itunes has stopped Working

I installed Itunes on my 64 bit Vista OS and it was working fine for about 3 weeks. Now I get an error message when I try to start Itunes now: "Itunes has stopped working"
I searched for a solution on here but it looks like Itunes doesn't support the 64 bit OS I have installed on my computer. I really hope they fix this. I've had my Ipod and Itunes for 2 years now. It's been a pleasure to own and I've bought many Songs from Itunes store. But, if I can't get it to work on my computer I may have to try to sell it for something that will work.
Thanks, Hairy

Hello, Sofa_King_Gary.
Thank you for visiting Apple Support Communities.
I see that you are experiencing issues with iTunes closing unexpectedly and you have attempted some troubleshooting steps already. There are just a couple more steps that I could recommend in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Cheers,
Jason H.

Acrobat9 for 64 bit Vista, program locks up at Form Wizard Import, why?

I installed Acrobat 9 Pro Complete (30 day trial) Version into my 64 bit Vista PC. After doing one Acrobat program required update to Windows, the program fully installed. When I go to Form Wizard, put in the name of a pdf file to open and click NEXT the program whites out and a error box pops up: Adobe Acrobat 9.0 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Close Program." Any suggestions of what I can do? Bob--

It turned out to be a failing disk drive, the drive that had the catalog on it.
I had to set up the disk check tool, which had to be run on boot up because the disk had the user profiles on it. (explorer, right click on drive in left panel, select tools and the "check disk for errors" tool.)
It ran for several hours, but at 11% through stage 4 of 5, verifying file data, it stopped and went no further. So apparently at least one of the files couldn't be verified. Without going into detail, I was able to copy the files I needed to another drive (robocopy), swap drive letters around using diskpart and get back into operation.
So, apparently LR needs some additional error handling related to file handles. Somewhere in the initial load of a catalog a file read failed and the LR code doesn't have a handler for that kind of error. What should happen, in my opinion, is that the LR error handling should have displayed a message that indicated an unexpected hardware fault, most likely disk related and recommended I run CHKDSK on the drive where the catalog is located.

QTVR and 64-Bit Vista

My company uses QTVR files extensively in our projects. We recently started buying new workstations with 64-bit Vista. Now none of our QTVR files can be viewed on the new workstations. Apparently this is a known problem and Apple has not addressed it. 7.6 came out today and guess what, it still doesn't work. Come on Apple when is this going to be addressed?
I'm a Mac fan and have them at home. I would love to get Macs into the office, but when things like this happen its hard to make that recommendation.

I Agree!
Message was edited by: MatthewJN

Ovi suite fails to install on 32 bit vista pro

when i try to install ovi suite on a 32 bit vista pro i get the error message: "there is a problem with this windows installer package. A program required for this install to complete could not be run. contact your support personnel or package vendor."
any one any ideas as to what this program is that will not run. i am logged in as an administrator.

Did you turn off antivirus during install? Try the latest PC Suite as well.
http://europe.nokia.com/support/download-software/nokia-pc-suite
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Trying to get 32-bit Vista to see more than 2.5 gb of my 4gb ram - T500

Hello all,
I've been reading what I'm able to find on the subject, and have tried the following suggestions from (http://www.ocmodshop.com/ocmodshop.aspx?a=989) to bump up the amount of physical ram that Vista sees. I've tried to forceenable pae, and then :
Type BCDedit /set nx AlwaysOff
Type BCDedit /set pae ForceEnable
Setting DEP off, and neither had any effect on the physical RAM available. I read a few posts hinting that these options may be unecessary in SP1 of vista as well. So, here are my questions :
1. Is it possible for the T500 with 32-bit Vista to address more than 2.5gb of physical ram?
2. If so, how can I do it?
3. Am I eligible for a 64-bit version of Vista with the recent purchase of my T500 and Vista Business?
Any information is greatly appreciated. Thanks much all....
Solved!
Go to Solution.

zoopside wrote:
I changed to DISCRETE GRAPHICS, rebooted : still @ 2.5, then DISABLE SWITCHABLE, rebooted : still @ 2.5. My ATI driver was "found" again, rebooted, and now I'm still @ 2.5.
I'll try a few more permutations of the options available, but did you do anything else?
Keep rebooting. At some point your system will recognize the additional ram.
My system did the same thing as yours. At first it showed an additional 54mb or so.
Then all of sudden it was up to 3,065mb. I can't remember how many reboots before
the big jump occurred. I am guessing 3 to 4 more reboots over a day or two.
I don't know why it takes several reboots before the system will recognized the additional ram.
T500 ~ T9400 2.53GHz 1066MHz 6MBL2 ~ Vista 32bit Home ~ WXGA 15.4 LED ~ ATI Mobility Radeon 3650 ~ 4GB ram ~ Camera ~ 160GB 7200rpm HD ~ Intel Turbo Memory 2GB ~ CD-RW/DVD ~ Intel WiFi 5300

Photoshop 64-bit Vista

Similar Messages

Maybe you are looking for