Photoshop 7.0 Install Move Data Error

I have reinstalled my operating system twice, after complete format, and both times when I have tried to install Photoshop 7.0 I get an error message; "Component Move Data Error Info, Media name: Data, Component: App-Photoshop, File Group: App-PS, File: photoshop.exe, Error Number: -106 (refer to online help)" which prevents me from reinstalling Photoshop 7.0!
I tried installing on another computer in my house, and the installation was flawless. I am having no problems reinstalling my other programs. On the 2nd of the above re-installs, I did it in the safe mode after deleting all the *.tmp files (and others) as recommended in a forum with Photoshop 7.1 update.
I have requested technical support from Adobe using their online system. I'm supposed to receive a response within 24 hours. I've used this system once before for Adobe Premiere Pro, and got good results, so hope I will again.
Any suggestions would be greatly appreciated.
Bill

When my copy would install on other computers, I figured it had to be the CD, or the way that CD interacted with my computer, despite the fact that I have two Pioneer burners (DVR-110D and DVR-111D) which operate perfectly. So I made a copy of it on another computer, and the new CD installed OK on mine. It really remains a mystery why that worked with me as it defies logic, but you might try installing your CD on another computer and see if you have the same problem, and if so, try my solution. Good luck.

Similar Messages

Photoshop CS6 wont install keep getting error

Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF024, DW063 ... WARNING: DS012, DW016 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 10 warning(s)
WARNING: DW016: NOTE: Cannot set action to the payload {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {C346BBCF-A687-4500-BB19-EE9C2D6FF284} Suite Shared Configuration CS6 3.0.0.0
WARNING: DW016: NOTE: Cannot set action to the payload {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {C346BBCF-A687-4500-BB19-EE9C2D6FF284} Suite Shared Configuration CS6 3.0.0.0
WARNING: DW016: NOTE: Cannot set action to the payload {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {C346BBCF-A687-4500-BB19-EE9C2D6FF284} Suite Shared Configuration CS6 3.0.0.0
WARNING: DW016: NOTE: Cannot set action to the payload {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {C346BBCF-A687-4500-BB19-EE9C2D6FF284} Suite Shared Configuration CS6 3.0.0.0
----------- Payload: {0C4E7429-E920-4125-980E-029A87AE0A4D} AdobeColorCommonSetCMYK CS6 4.0.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 21)
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 22)
----------- Payload: {C7B1C1B3-368D-4C32-A818-83F1554EB398} AdobeColorCommonSetRGB CS6 4.0.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 11)
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 12)
----------- Payload: {48623899-C152-457D-9B30-1F957332AC2F} AdobeColorPhotoshop CS6 4.0.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 3)
----------- Payload: {78E38D75-4D92-4F6E-B631-17A436BED680} AdobeColorVideoProfilesCS CS6 4.0.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 5)
----------- Payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "/Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/Frameworks/AdobeCrashReporter.framework/AdobeCrashReporter" (Seq 94)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 94)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop CS6 International English Language Pack_AdobePhotoshop13-en_GB: Install failed

Here is link for Exit Code 6 which I hope will prove useful. http://kinghill-server.appspot.com/helpx.adobe.com/creative-suite/kb/errors-exit-code-6-ex it.html

Error "searching for movie data"

Hi,
Okay, here's my problem. I edit on FCP 4.5 and used a Lacie drive for all my media. I was putting in non time-coded media for a new project and I ran out of room. So, I bought a G-Drive. I copied all the media for the new project onto the G-Drive, trashed it on my Lacie and started editing the project. After I got everything on the G-Drive, I wanted to edit on my Powerbook on the road with the Lacie, so I copied all of it back onto the Lacie after moving a few things around. Now, when I work off the Lacie drive and have the G-Drive off, I get a "searching for movie data" error on several clips when I open the project. It ultimately opens after a few minutes and the footage is all there, but I can't for the life of me remedy the problem.
I know I caused it by copying media back and forth, but how do I fix it? My scratch disk is set as the Lacie drive.
Thanks,
Mike

I'm pretty sure that's what it does. Some formats will benefit from capturing audio and video to different drives. DV on the other hand functions better capturing to one drive.
I've seen fcp get hung up on this searching for movie data thing and not let go. I recently tried to open an old project and got this message. I cancelled and for the next day or so, I kept getting this message everytime I tried to launch fcp (and I have open last project disabled in my preferences).
The moral to the story is: Avoid reference qt's at all costs. Drive space is cheap.

Photoshop save optomized as = data error (cyclical redundancy check)

anyone kow what this means?
in photoshop using "save optomized as" = data error (cyclical redundancy check)

I am trying to save a png via "save optomized as" from my master PSD and after thinking for a minite I get a dilaog window that just gives the path and file
e.g.
D:path/file.png
data error (cyclical redundancy check)
photoshop 64 bit 12.0
windows 7 64 bit al updates intalled
note: the only thing I am doing differntly is running photoshop in admin mode. not sure if that related. i tried doing it after wathcing a tuitloal that said Adobe apps run better in admin mode

Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

Have no idea of what you were even doing in Photoshop my crystal ball is out for repairs so I can not see.

Data Mover login error (SQL 2008R2 as backend DB)

Hi,
This question was asked in this thread -> Continued Discussion - Steps to Upgrade PT8.49 to 8.50 Manually
The difference between problem in that thread and mine is that I have WIN08R2 SQL08R2 Peopletools9.52 and Peoplesoft HRMS 9.0 installed. I was on the steps of creating the databases manually with the sql scripts and that was also preformed.
I also have different ConnectID: people and AccessID: peoplesa with respective passwords. I try login in with the AccessID and I get the below error.
File: SQL Access ManagerSQL error. Stmt #: 2 Error Position: 0 Return: 8077 - Invalid SNAC client version (minimum is 10.00.1763) (SQLSTATE PS077)
Any suggestions?
-Vishal

Hi there,
I upgraded the SNAC client to 1033\x64\sqlncli.msi from the Microsoft and still I get the same Login error in the DataMover.
I checked the registry location --> HKEY_Local_Machine\Software\Microsoft\Microsoft SQL Server Native Client 10.0\Current Version = 10.51.2500.0
The Data Mover login error says that it requires minimum is 10.00.1763 so i guess the one I have should work fine?
Any suggestions?
-Vishal

Data error (cyclic redundancy check) when installing windows xp..

hi guys.. i'm new here.. just switched to macdom a few days ago but unfortunately, i have been having problems trying to install windows xp with sp 2 on my system using boot camp. everytime i install it, i get to the setup screen ("39 minutes till setup rah rah rah", "windows xp is awesome because it has this cool interface etc... rah rah rah") and then the error of doom comes out -_-
the error given is;
an eror has been encountered that prevents setup from continuing
one of the components that windows needs to continue setup could not be installed
data error (cyclic redundancy check)
if you are installing from a cd, there might be a problem with the disc; try cleaning the disc or using another disc
if you are installing from the network, it is possible that not all of the files were copied correctly to your disk drive. run the disk checking utility on your installation drive from the recovery console and start setup again
press ok to view the setup log file
i have tried numerous times without fail and it is getting to my head.. gah.. if someone could help me out, it would be massive and i would sell my soul to you! (kidding).. thanks for reading!
p/s: my setup is;
Macbook
2.1ghz
1gb ram
120gb hard disk
dvd/cd-rw combo drive
the basic setup pretty much.. again.. any help would be greatly appreciated. thank you so much guys!

I guess there is a problem with your XP CD, probably scratched or did not burn successfully. Have you tried it with another installation cd?

I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop. I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library. Any thoughts?

I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop. I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library. Any thoughts?

download the installation files and install using your serial number or adobe id,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Error while installing Oracle Data miner 10G Release 2

Hello,
I am a student involved in research in Data mining. I am new to Oracle Database and data miner.
I installed Oracle Enterprise Manager 10g Grid Control Release 2 (10.2.0.1). Now I am trying to install ORacle data miner (10.2.0.1). However, at the time of installation ODM gives the following error:
"specified data mining server is not compatible. 10.1.0.4.0."
I have installed Oracle 10.2.0.1 but when I login using SqlPlus I get the following information -
SQL*Plus: Release 10.1.0.4.0 - Production on Sun Jul 23 09:52:41 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL>
I would be really obliged if someone can help me with this.
Thanks in advance
Pooja

Hi ,
Download and install the product version(10.2.0.1.) of Oracle Data Mining....
Simon

ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1

Hi,
i have the following message when i tried to install LR 5.6
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe Photoshop Lightroom 5.pkg_5.6 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
how can i solve this issue?
I am running on Mac with OSX 10.9.4
thanks in advance
Olivier

olebreth wrote:
how can i solve this issue?
A search of the site would probably be a good start:
https://forums.adobe.com/search.jspa?q=dw006

Getting error 16 in CC2014 Photoshop even after installing and re-installing mac maverick latest update 10.9.5

Getting error 16 in CC2014 Photoshop even after installing and re-installing mac maverick latest update 10.9.5

Check if this helps. http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
~ Arpit

I want to install Photoshop but everytime I get an ERROR CODE: A12E1.How do I solve that and what is it?

Hello,
I want to install Photoshop but everytime I get an ERROR CODE: A12E1.How do I solve that and what is it?

A12E1 error installing Creative Cloud products | CC
Mylenium

Steady Stream of "Searching for movie data in the file..." Error Messages

My iMovie has been crippled by error messages that pop up whenever I try to accomplish anything in iMovie. I always see "Searching for movie data in the file 'healyintro.mov'" for a few minutes, then "The movie file 'healyintro.mov' cannot be found. Without this file, the movie cannot play properly." I cannot actually use iMovie because of these errors.
I've tried everything from reinstalling iMovie to removing application support files to removing my iMovie Events and iMovie Projects folders to creating a .mov file, calling it healyintro.mov and seeing if that'll shut iMovie up – nothing works.
Once in a while, iMovie will ask for a different movie file, with the same problem.
Any ideas?

I am having the same issue. I don't know what the previous poster means by allowing the system to continue, since I'm prompted with a "Cancel" / "Search" dialog after each missing clip. Slight digression: "Search" is not even the correct term here according to UI guidelines ("Choose" or "Locate" might be better choices given the file picker dialog that results).
I'm actually using Aperture to relocate my video masters on removable media, which is a very nice feature of Aperture, but completely breaks iMovie unless it's connected. Seems like a pretty major oversight.... can we just have it fail more gracefully here and allow us to work with new stuff without getting hung up on missing movie clips from the past?

Photoshop Camera Raw 7.4 Update is not installing because of Error Code U43M1D207. What needs to be done to resolve this error code issue?

Photoshop Camera Raw 7.4 update is not installing because of error code U43M1D207. What needs to be done to resolve this issue?

If you need to post again, please keept the following in mind:
BOILERPLATE TEXT:
Note that because this is boilerplate text, not all points may apply to any given, specific poster.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I have the system "windows 8.1". When I try to install Photoshop Elements 9 I became the error Message; Photoshop can't be install, I need the Internet Explorer 4.0 or higher. The setup will be closed.

I have the system "windows 8.1". When I try to install Photoshop Elements 9 I became the error Message; Photoshop can't be install, I need the Internet Explorer 4.0 or higher. The setup will be closed.

There is a problem with IE10+ in that it is mistakenly seen as being IE1. To get around this either use a different browser or use compatibility view (http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-10)

Photoshop 7.0 Install Move Data Error

Similar Messages

Maybe you are looking for