Photoshop 7 - CS3 Clipboard Issue

I have been having this problem with Photoshop 7.0 for a while, where I cannot paste from "Windows" to Photoshop. I often use print screen, and while Paint can paste the screenshot no problem, Photoshop does nothing.
I found a solution that said to apply a registry edit to add:
[HKEY_CURRENT_USER\Software\Adobe\Photoshop\7.0]
AlwaysImportClipboard=dword:00000001
I did that and the clipboard did not seem to work. The only time it does work, is sometimes after a fresh restart when PS is first opened. Any time after that the clipboard feature is inoperable.
I finally decided to upgrade to CS3 and was upset to learn that it has the same problem. I applied the registry patch to this install too:
[HKEY_CURRENT_USER\Software\Adobe\Photoshop\10.0]
AlwaysImportClipboard=dword:00000001
But it still doesnt work. I've seen people complaining about this in forums since 2006. Are you telling me that Adobe has released 3 new PS versions since 7.0 there is still no fix?\
I hope someone here can help me out.

Bill:
Thanks for the ideas.
>Jon, how are your systems configured and how is the RAM populated? What are the Virtual Memory settings in your two OS configs? What are your memory allocation settings for Photoshop and what are your Scratch Disk allocations?
Both systems use DDR400 RAM and both have 1GB each. My virtual memory is system managed on both machines. I'm not sure of my PS memory allocation settings or Scratch Disk Allocations. I can say I have not modified any of these settings from the defaults.
>Do you normally work with other programs open (though maybe minimized), or is PS the only launched program, when this happens?
Generally PS is the only program open (aside from running processes, taskbar items, etc.), and perhaps Internet Explorer or Firefox (where I'm usually taking my screenshots).
>I also do not recall if you posted a list of all of your running processes. Did I just miss that? `
Here are my running processes:
03 Jun 2008 13 04 [System Process] PC1
03 Jun 2008 13 04 System PC1
03 Jun 2008 13 04 smss.exe PC1
03 Jun 2008 13 04 csrss.exe PC1
03 Jun 2008 13 04 winlogon.exe PC1
03 Jun 2008 13 04 services.exe PC1
03 Jun 2008 13 04 lsass.exe PC1
03 Jun 2008 13 04 svchost.exe PC1
03 Jun 2008 13 04 svchost.exe PC1
03 Jun 2008 13 04 svchost.exe PC1
03 Jun 2008 13 04 svchost.exe PC1
03 Jun 2008 13 04 svchost.exe PC1
03 Jun 2008 13 04 spoolsv.exe PC1
03 Jun 2008 13 04 mDNSResponder.exe PC1
03 Jun 2008 13 04 MDM.EXE PC1
03 Jun 2008 13 04 NTRtScan.exe PC1
03 Jun 2008 13 04 nvsvc32.exe PC1
03 Jun 2008 13 04 OtService.exe PC1
03 Jun 2008 13 04 HPZipm12.exe PC1
03 Jun 2008 13 04 svchost.exe PC1
03 Jun 2008 13 04 TmListen.exe PC1
03 Jun 2008 13 04 wdfmgr.exe PC1
03 Jun 2008 13 04 ViewpointService.exe PC1
03 Jun 2008 13 04 winvnc4.exe PC1
03 Jun 2008 13 04 OfcPfwSvc.exe PC1
03 Jun 2008 13 04 alg.exe PC1
03 Jun 2008 13 04 BDC55F.EXE PC1
03 Jun 2008 13 04 explorer.exe PC1
03 Jun 2008 13 04 OtMonEx.exe PC1
03 Jun 2008 13 04 PccNTMon.exe PC1
03 Jun 2008 13 04 ctfmon.exe PC1
03 Jun 2008 13 04 VisualTaskTips.exe PC1
03 Jun 2008 13 04 wcescomm.exe PC1
03 Jun 2008 13 04 GoogleToolbarNotifier.exe PC1
03 Jun 2008 13 04 rapimgr.exe PC1
03 Jun 2008 13 04 DevDtct2.exe PC1
03 Jun 2008 13 04 SetPoint.exe PC1
03 Jun 2008 13 04 AWC.exe PC1
03 Jun 2008 13 04 RocketDock.exe PC1
03 Jun 2008 13 04 UberIcon Manager.exe PC1
03 Jun 2008 13 04 YzShadow.exe PC1
03 Jun 2008 13 04 KHALMNPR.exe PC1
03 Jun 2008 13 04 aolload.exe PC1
03 Jun 2008 13 04 Acrotray.exe PC1
03 Jun 2008 13 04 FNPLicensingService.exe PC1
03 Jun 2008 13 04 iexplore.exe PC1
03 Jun 2008 13 04 processlogger.exe PC1
>Have you received any memory related error messages, maybe during shutdown, or with any programs? Have you searched your Event Viewer for any warnings, in either Applications, or in System?
No memory related errors at all. Both computers have been running fine, with no problems (besides this PS issue).
>End result is that something is getting in the way of either the data being written TO the Clipboard (is it there, and just not accessible by PS?), or when getting those data OUT of Clipboard, by PS (is that the ONLY app that cannot get it out?). Does the workaround of using MS Paint always work, and with PS not?
The MS Paint clipboard/paste workaround always works, with no problem. The PS clipboard paste feature almost never works anymore, and when it does, it's usually only after reboot.

Similar Messages

  • Photoshop CS5 Clipboard Issue (Win 7)

    I have a copy of PS CS5 installed and i can only paste an image that i copied from before the program was started. When Ps is already started and I copy an image and try to paste it in PS it will paste the image I copied before I started the program not the one I just copied...
    It's a pretty annoying situation... not being able to copy and paste once the program is running. I have to shut it down, start it up again to paste the image I want...
    Anybody a solution?
    I work on: Win 7 ultimate 64 bit - i7 - 8 gigs ram

    function(){return A.apply(null,[this].concat($A(arguments)))}
    JanGeloen wrote:
    Are you guys sure this isn't a PS 64 bug?
    It's clearly a bug with something.  But even though you're seeing it in multiple places, please rest assured it doesn't happen for everyone using Photoshop CS5 x64.
    Shall we go about describing the differences between your systems (plural) and systems NOT experiencing the problem?
    What applications do you have installed.  What antivirus?  What programs are starting when you boot up / log in?
    Here's what's starting on my x64 system (courtesy Autoruns), on which the clipboard works just fine:
    AdobeAAMUpdater-1.0 (Adobe Updater Startup Utility)
    WebDriveTray (part of the WebDrive application for providing access to FTP sites via drive letters).
    avast5 (Avast! Antivirus)
    StartCCC (ATI/AMD's Catalyst 10.8 video driver control center)
    vmware-tray (part of the VMware Workstation virtualization application)
    Outlook.lnk (Outlook 2003 eMail client starts up when I log in)
    ShellFolderFix.lnk (a small applet called ShellFolderFix that helps position Explorer windows when first opened)
    Skype (audio/chat communications program)
    WizMouse (a small applet that directs mouse wheel events to whatever app the mouse is over)
    Here are my non-Microsoft shell extensions and drag/drop handlers (courtesy Autoruns and ShellExView):
    ACE (AMD Desktop Control Panel, part of Catalyst 10.8 video drivers)
    avast (Avast! Antivirus Shell Extension)
    CirrusShellEx (provides right-click access to the Beyond Compare 3 file comparison application)
    ClassicCopyExt (part of the ClassicShell application that adds enhanced dialogs to copy/move operations)
    Create ISO Image from directory (part of the ISO Recorder application that provides access to ISO files)
    TortoiseSVN (provides right-click access to Tortoise Subversion)
    WebDrive (manages drive letters connected by the WebDrive FTP access application)
    There are other things, such as services, that could be involved, but let's start by comparing your systems to these and let us know what's common between them but different from the above lists.
    -Noel

  • Photoshop CS3 delete issues

    I am having issues in photoshop. I can select a background of a photo but when I hit delete or cut nothing happens. I reset the preferences but still no luck. This has been going on for months and I need to get it fixed.
    Had the same problem today inverting selection then hit delete. Nothing. Used CUT nothing. This makes life VERY difficult!

    Hmmm...  Difficult to test because i think most of use CS5, and delete brings up the Fill dialogue box.
    Are these single layer 8 bit bitmap images (opened from a JPG or converted RAW file)?  And you are hoping to leave the transparent background?

  • Windows Clipboard won't paste in Photoshop CS3

    The subject pretty much covers it. If I do a print screen and then do a paste into Photoshop CS3 it doesn't paste the image from the clipboard. I can paste it into Windows Paint, just fine, but if I try to copy from that and into Photoshop it also doesn't work. Anyone else having this problem? I do screen grabs all the time, so this could be serious.

    Ugh! I have been dealing with this problem for the past 6 months or so. After reviewing several of the responses on this forum, I am comforted by the fact that I am not alone in dealing with this issue.
    I am running CS3 on a Pentium 4, 3.4 GHz system with 2 GB of Ram. I have Windows XP service pack 2. I am pretty good about getting both the latest windows and adobe updates. With respect to screen resolutions, I have 2 22inch lcd monitors both running at 1200x1600. My previous version of Photoshop was version 7 plus I had the Macromedias Dreamweaver Suite version 8.
    For me the print screen problem has been totally random. I can grab a number of different screen shots (using <alt><prtScn>) and paste them into photoshop without a problem. Then, the process just seems to stop working and then I am only able to paste the last item I was successfully able to grab. And like others on this forum, other apps like Microsoft Word, paint, etc. would let me paste the same image in even though Photoshop would not.
    Now, when this problem would come up, for me, it was just a simple mater of recycling Photoshop and then I would be back in business.
    I just tried to add the registry key suggested by Nathan (see http://microsoft.blognewschannel.com/archives/2007/09/05/how-to-fix-the-photoshop-clipboa rd/) I opened regedit, navigated to the [HKEY_CURRENT_USER\Software\Adobe\Photoshop\10.0] folder and added a new dword key. The name of the key is AlwaysImportClipboard and the value is 1. Right now, I seem to be in business.
    PS Finally, I feel sorry for those who take offense by any accusations posted on this forum that this issue may be a Photoshop bug. It really does not matter whether this is a windows configuration issue or a Photoshop bug. I just want this feature to work. I think Adobe has done a great job producing an extremely powerful product with more features than I will ever use. I wouldnt be surprised if there was a bug or two.

  • Adobe Photoshop CS & CS3 upgrade issues

    I have recently obtained an original disc of adobe photoshop CS and an original disc of adobe photoshop CS3 upgrade to install on my Imac which is running lion at the moment, only to be told that power pc programmes are no longer recognised. I was intending to install the  original Photoshop CS and then upgrade it to CS3, however due to this issue i cant install the original disc.
    I have read that if i revert back to snow leopard then i would be able to install these programms without issue, but the question is then if i then update the OS system to lion, would the updated version of photoshop CS3 still work, being on the back of CS? or would it stop working?
    If this updated programme does not work, am i better having a partitioned disc just to run snow leopard and to use photoshop, and if this is the case would i be able to access all saved images and files when running the lion side of the partition in order to sync these with i cloud and my ipad?
    regards

    The bootable Snow Leopard partition is the way I would do it.
    Borrowed from Kappy,
    Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. After formatting is complete quit DU and return to the installer. Install Snow Leopard being sure to select the external drive as the target.
    Note that you will need a Snow Leopard DVD. The above will only work for you if you can boot your computer from a Snow Leopard DVD. If you have a new model that came with Lion pre-installed then the above will not work because a Snow Leopard retail DVD cannot boot your model.
    Then install your CS and CS3 and run them in SL. If the images are stored in a seperate drive/partition then it should work seamlessly.

  • Photoshop CS3 and Light Room color issues on Mac

    Hi,
    I'm a photographer and I work mostly on my Mac. Recently however I started having issues when editing in Lightroom and Photoshop CS3 as the colors are very off from Lightroom.
    I attached these 2 images to show the differences.
    From Photoshop or directly from camera into Lightroom images look fine but after being edited in Lightroom and exported they look all brownish - green in Photoshop and on any other computer as well in print.
    I try to research it a bit online and it seems it all has to do with color profiles but can't get to the bottom of it.
    I tried to change the lightroom from ProPhoto RGB to Adobe RGB 1998 but it does not seem to work.
    The Photoshop is set on Monitor RGB and all images from Photoshop are fine on other computers and in print.
    Any ideas anyone?
    Thanks.

    Well, I think what you need to do is get a better grasp on the fundimentals of color management-which is a bit beyond the scope of what the forums can offer you.
    The bottom line is that Lightroom & Photoshop CSx (meaning past CS or actually even back to 7) can and does make use of display profiles (you can't turn it off even if Photoshop has a setting that makes you think you can). An image in Lightroom and Photoshop is always color managed...outside of an app that is color management, all bets are off.
    Save, assigning and converting to profiles are all very different. Photoshop CS3's color settings are absolutely critical because that's how you deal with managed and unmanaged color.
    Until you learn different, I would suggest that you set your CS3 color settings to North American PrePress 2....if you want images for the web, Convert To sRGB or use the new Save For Web (which can now do the sRGB conversion-finally).
    For other uses and purposes, I would suggest that you seriously consider using Adobe RGB-until such time that you understand the implications of using Pro Photo RGB.

  • Colour Management Issues with Leopard and Photoshop CS3

    Hi Everyone,
    Since I have installed Leopard I am having colour management issues with Photoshop CS3 and my Canon i9950 printer.
    My screen is calibrated with a Spyder and I used to ask Photoshop (in 10.4.11) to manage colour when printing and used the Spyder profile. Everything came out as I saw it on screen.
    Now in leopard when I do the same thing everything comes out too yellow on the print. If I ask Photoshop to let the printer manage the colour it is too red. If I use the default colour management (photoshop managing the colour and it choosing the colour space it is better, but still too yellow).
    Photoshop gives the hint to turn off colour management in the printer but there is no option for this and it also said the same thing before of course (when it worked in 10.4.11).
    Any ideas?
    Thanks.

    I'm having exactly the same problem, only my printer is a Canon Pixma iX4000. The colour is all bleached out, it looks exactly like when you've accidentally printed an RGB file on a CMYK printer, and at first I thought that was what I had done, but it isn't. This is very frustrating, I've spent all day going through the manuals, recalibrating etc, but no luck. This is a brand new Mac Pro and printer, but if its not going to print what I see on screen it's just expensive junk.
    I wasn't sure if the problem was Leopard or the printer or CS3...

  • Photoshop CS3 issue

    I did a clean install of leopard. Then installed CS3 Design Premium.
    Photoshop is acting very weird. I used to have the "flickering cursor problem", but I think it's gone after I did update Photoshop.
    But I still have this weird problem with input menus - I can't enter values into font size/radius box (also into width box while tranforming). Sliders work fine but this is very annoying!
    Also I see some weird graphical issues with menus and GUI (there's a slightly darker, but still cleanly visible gray rectangle under some buttons like SAVE, CANCEL, RESET and so...).
    I've read adobe forums, and there are some people having exact same problems. Anybody else had similiar problems ?
    As for now *PHOTOSHOP CS3 IS NOT FULLY LEOPARD COMPATIBLE !*

    You saved me guy. I didn't have exactly te same problem as you but i tried to reinstall photoshop CS3 cause of the report problem window (where you explain what hapened and it sends to ADOBE (not apple).
    And i have the same pro with firefox cs3 I guess it's the same combination of keys to get id of prefs…
    But all of this hapened after I boot with disk warrior to repair catalog and permissions.
    After that i had may be i still, i need to restart to see (i'm scared) problems. I was no more Administrator of the Mac … I'm shure thre is a link so i boot with leopard change my password then i restart Changing it in users. Now i pray cause i have a lot of work to do on Photoshop. Curiosly it didn't affect others app of CS3 suite…
    Thanks a lot Bastille (actually i'm living at 500 m of La Bastille Paris

  • Photoshop CS3 Layer Style Issue

    I have Photoshop CS3. Ever since I installed it I have had an issue with Layer Styles, one that I have not had before with other versions of Photoshop. Whenever I apply a Layer Style to a layer the Effects menu automatically drops down in the layers palette. I have to go and manually close the menus each time for every layer that I apply the style to. I have never had this problem before with any other versions of Photoshop.
    If you have any ideas or advice on how to fix this problem it would be of a great help.

    Go to the layers palette options and uncheck Expand New Effects.

  • Bug:  Holding slider in Photoshop CS3 color selection dialog causes issues under Windows 7

    I was using the color selection dialog this morning and discovered that clicking and holding the vertical slider or the little arrows for about three or four seconds causes Windows 7 to declare Photoshop CS3 as being unresponsive.  The whole Photoshop UI starts freaking out at that point:  The color selection dialog "vanishes" and black bars start appearing all across the application.  Minimizing and then showing the application restores it to its previous state.

    You're welcome.  Glad to hear the driver update corrected the issue for you.
    TheFunnyMonkey wrote:
    I'm slightly envious of your 5670. But only slightly.
    I just got it, having previously used a 4670.  The 5670 is not hugely fast in the benchmarks, probably not much faster than yours, but it animates everything in Photoshop perfectly smoothly (Photoshop is far less demanding than most games).  I am most fond of the fact that the 5670 draws so little power it doesn't need an extra power connection over and above what it gets from the PCIe buss, and so it runs cool and quiet.
    -Noel

  • Have issue photoshop cs3 can't open download from adobe

    my pc crashed...so deauthorized photoshop cs3 from it to authorized to laptop...with support from adobe gave me the file to download...the issue is i cant open the download file they sent me any ideas for what i need to do???
    thanks

    Hi tsm,
    Use the link given below to download the 7z extractor on your PC.
    http://www.7-zip.org/download.html
    Thanks

  • Photoshop and ID CS3 known issue?

    Hi all,
    Whenever I try to save a file from Photoshop over an existing file PS will refuse to save if the image is in an open, and unsaved, ID file.
    That, I assume, is normal. Usually saving the ID file will allow PS to save correctly. However more and more now I have to totally quit ID to be able to save a file from PS that is in use in a document open in ID.
    Hope I made that clear - it's a major pain in the posterior.
    Whilst I'm rapidly getting to the point of preferring ID over Quark this is a damn nuisance - to not be able to save a file simply because it's linked to an un-saved ID document, or like I said even linked to a no longer open ID document, without quitting ID first is slowing work down!
    Versions are as follows:
    OS 10.4.11, Photoshop CS3 10.0.1, ID CS3 5.0.2
    Thanks!
    Greg

    Buko,
    I have not experienced the problem on my machine. You are right, my InDesign is pre-CS, and I use it very infrequently these days.
    However, the error message and issue is seen intermittently by other posters, and by an acquaintance who is on a network. The application that has a file open doesn't have to be InDesign necessarily.
    You may have misconstrued the original post.
    b [Otherwise, I did.]
    It
    b is
    a Photoshop issue, not an ID issue. In this case, InDesign happens to be the application which has the file open that cannot be saved
    b in Photoshop.
    The workaround by the OP works.

  • Edit in Photoshop CS3 Issue

    I have one computer where if I do "edit in Photoshop CS3," the file opens in Photoshop and the file name shows as a <image#>.CR2.  I can then save it as a jpg or whatever, and the added file shows up in my Lightroom catalog.  Perfect!!<br /><br />On my other computer, when I go through the same steps the file opens in Photoshop as <image#>-Edit.Tif.  And not only does it open this way (-Edit.Tif), but it automatically saves this image on the hard drive and adds it to the catalog regardless of whether I proceed to save in Photoshop or not.  This is driving me crazy, because it is saving multiple files and eating up hard drive space for no good reason.<br /><br />Can anyone help?  I've checked preferences, etc. 100 times but must be missing something.<br /><br />My "Edit in CS3" preferences are TIFF, sRGB, 8 bits, 250 resolution.  The "Edit Externally File Naming:" at the bottom of the Preferences page has "Custom Name" beside Template and nothing in the Custom Text line.<br /><br />Help!<br /><br />Thanks - Mark

    Lee Jay, I want the 2nd to do the exact thing the first does. As best I can tell, I have them setup identical and the first computer is not doing creating/saving files with a -Edit.tif in the file name.
    In any event, my bottom line is I want to choose "Edit in Photoshop CS3", have the file open in CS3 ready to edit, but not create a new file on my hard drive with a "-Edit" in the file name. I don't want anything automatically saved on my hard drive until I choose to save in CS3, and will likely save as a .jpg.
    So how can I accomplish this?
    Apologies for any confusion trying to explain this.

  • PhotoShop Cs5 to Cs3 Brush issue

    Hello.
    Previously I was using PhotoShop CS5 for my personal art design, however i had to switch back to CS3 for various reasons. Having devoted a lot of time and care into my CS5, I saved up my
    swatches, styles, brushes, etc..... so I wouldn't lose all my work. I spaced, however, and saved the CS5 brushes with the rest of my generic brushes in the process of a mass save. I no longer have access to CS5, and when I attempt to load the .abr into my CS3, it gives an error.
    "Could not load the brushes "D:\etc\etc\etc\Brush Set 1.abr" because the file is not compatible with this version of photoshop."
    Is there anyway to get in there and delete those specific brushes, recover the ones I'm after......or.....anything?
    Thanks

    Call Customer Service. You will need Photoshop CS3 media as a start as Adobe no longer provides media for older versions.

  • Issues with Photoshop cs3 and lion

    when i try and open my photoshop cs3 a message pops up saying I'm missing a java run time. i click the update bottom but it say there is no such software update. my question is why and are there any solutions?

    http://kb2.adobe.com/cps/905/cpsid_90508.html

Maybe you are looking for