Photoshop 7 doesn't start

Hi there,
I installed photop 7 on my ibook g3 500, 192 mbram 30gb hd. os 10.3.9
When i run it I get a message saying "the application photoshop unexpectedly quit" and it asks me if I want to
reopen, close or report to apple (thoi happens when photo is checking the fonts)
I repaired disk permissions with disk utility, and delete photoshop's preference file
I have no file photoshop .plist files
Any idea?
Thanks

I would say that you most likely need more memory to run the application. Photoshop (especially CS2, but even the earlier versions) are memory hogs, and if you are trying to run it on a G3 500MHz laptop with only 192mb of RAM... I can see you having problems... I don't even know how you have Panther running (without lots of lagging) with less than 256mb RAM.
All newer operating systems have the minimum requirements which include the RAM size (min) needed, never believe that number, at least double it if not more for what you need for a smoothly running system (even before Memory Hogging Applications). Windows XP Home Version (if not all XP versions) ask for a minimum of 128mb... 512mb of RAM can be fine if you don't use intensive programs like games or graphics editors, but if you do use them, you want at least 1GB if not 2GB (which is the maximum RAM amount for most lower-end systems or ones that are a couple years old).
Your iBook G3 500MHz can be upgraded to a total of 640MB or 576MB RAM depending on if you have 64MB or 128MB built-in before adding in a 512MB card (the largest size you csn add in the second RAM slot, and you cannot change the built-in RAM in the "1st slot")...

Similar Messages

Installation CS4 Master Collection (Trial): Photoshop doesn't start

After installing the following products from the CS4 Master Collections DVD (as 30 days trial versions):
- Acrobat 9
- InDesign
- Illustrator
- Photoshop
and everything (what is possible) else UNCHECKED I get the following error at the end of the installation:
"Finished, with Errors" and then the detail:
"Adobe Photoshop CS4 German Language Pack
Fehler:
Error 2."
The first 3 of the above programs starts in german and works fine. Only Photoshop will not start and show the following english error:
"Adobe Photoshop CS4
Some of the application components are missing from the Application directory, Please reinstall the application".
Unfortunately, there is no information about WHICH components are missing and WHERE is this "Application directory" where I could double-check this missing files.
Could anyone help me to find this missing components?
Is there a Logfile where I can check them?
Can I look for information about installation-errors?
(I know, we have a file called "Adobe Creative Suite 4 Master Collection 4.0 dd-mm-yyyy.log".)
But I need some help to find the missing components. Some lines that could describe the problem are this:
[ 1620] Thu Apr 09 13:27:12 2009 ERROR
Source file for installation not found at D:\Adobe CS4\extensions\AdobePhotoshop11-de_DE\Assets\_148_ed20f3808d3a830de9e79404cb149063
[ 1620] Thu Apr 09 13:27:12 2009 FATAL
JavaScript processing failed with error:
Uncaught JavaScript exception: Source file for installation not found at D:\Adobe CS4\extensions\AdobePhotoshop11-de_DE\Assets\_148_ed20f3808d3a830de9e79404cb149063
[ 1620] Thu Apr 09 13:27:12 2009 DEBUG
Rolling back prior actions...
I have checked this "not found source filename" on my DVD#3 and found it with 8.35 KB (8'557 Bytes). I can open it and it contains readable code on 156 Lines starting with:
<?xml version="1.0" encoding="UTF-8"?>
and ending with
</html>
Do you have any idea what could generate my problem if the file exist on the media, can be read but the installer tell me the exact opposite?
What could I try to solve this problem?
Do I have any chance to install the language pack separatly? (It seems, that Photoshop CS4 itself has been installed, at least a so called directory exists and many *.DLL and the photoshop.exe can be found)

Normalerweise solltest Du gar nicht in die Verlegenheit kommen eine südamerikanische Version in Deutschland zu installieren. Hast Du die Möglichkeit die DVDs alle zu mounten? Dann versuche das.
Ein anderer, aufwändigerer Weg ist der, dass Du die erste DVD mit allem drum und dran auf den Server kopierst, der Installer besteht aus einer vielzahl von Payloads. Dabei sind nach dem ersten Kopieren viele leer, von den nächsten DVDs kopierst Du die Payloads, nur die Inhalte in deren Ordner vom Installer der ersten DVD. Am Ende hast Du einen vollständigen Installer an einer einzigen Stelle, der bei Installationen von einem Netzlaufwerk Sinn macht und das zukünftige Installieren beschleunigt.

Photoshop doesn't start correctly.

After starting Photoshop (on Mac OS X 10.7.5) several messages appear "Kopieren wird vorbereitet".
Then it needs a long time until the Photoshop window opens (about 5 minutes).
Anton

Hi,
now I found that the problem is there if I have running the application "VMware fusion" at the same time.
After closing vmware, Photoshop starts normally.
With running VMware at the same time, the problem is there independent of the way I start photoshop (starting ps alone without a file or by double-clicking a file).
Anton

Photoshop doesn't start up anymore.

Dear mr or mrs,
When I try to start up my Photoshop 5.1, the system says the following:
Translated from Dutch to English, the screen says the following:
Photoshop has stopped unexpected during the last time you started up the system? Do you want to try to open the windows again?
If I choose for the option try again, then my operating system says the following:
But if I choose for the option, try again (in Dutch: open opnieuw) then I get the following message again:
And if I choose 'Open again' (Open opnieuw), then I get screen two again.
Does anyone know how I can solve this problem? Many thanks in advance!
Kind regards,
Marcel Blijlevens
[email protected]

Dear Chris,
Thanks for your reply. Here are the other lines. Allthough I have my doubts, I hope you can read it. If not, please tell me what to do to inform you properly.
Kind regards,
Marcel
E [email protected]

Photoshop Doesn't Start.

Hello,
Photoshop worked fine until yesterday.
I wanted to start up my photoshop and i see my mouse cursor loads and then nothing is happening.
Already Re-Installed it then he worked then i restarted my pc and it gots the same problem again.
I'm an Designer and this problem is really annoying me.
Are there any solutions?
Windows 7 Proffessional 32 Bits
ATI Radeon HD 5450 Series.
Greetings , Davey
I

Find the relevant info in your Event Viewer and provide it.
Mylenium

Photoshop Elements 5.0 doesn't start after reinstallation

On my Windows 7 system was PE 5.0 up and running. Due to a system error I needed to Recover the system and afterwards réinstall all programs, including PE 5.0. Th installtion went correct, but the prgram doesn't start I've removed all temp internet files, but that doesn't help. What do?

I didn't have the PSE 5,02 patch installed. But when I did, I received the following error message:
Setup cannot find Adobe Photoshop Elements 5.0.
Please re-install Adobe Photoshop Elements 5.0 before applying this update.
Setup will be aborted..
I re-installed PSE 5.0 again (tyherefore I needed to delete my Temp internet files, before I coulkd install it). The installation seemed to be right, but I still can not strat the program (no error message) and I can't install the patch (same message)

Photoshop Elements 13 doesn't start after Update to Win8.1 (MSVCR110.dll is missig)

Hello everybody
I installed the Update from Win8 to Win8.1
Now Photoshop Elements 13 doesn't start.
The mistake/error: "The program doesn't start, because MSVCR110.dll is missing. Re install the program."
So I re installed Photoshop but the mistake is still there.
What can I do?
LG Simon

Try steps mentioned on blog: http://psekb.blogspot.in/2013/04/pse-editor-is-not-launching-windows.html
Please let me know if that doesn't resolves the issue.
~Andromeda

Dreamweaver CS5 doesn't start, cannot find configuration file

Dreamweaver Could not locate the Resource file in the Configuration folder. This file is required to run Dreamweaver. Please reinstall the application.
Dreamweaver CS5 doesn't start due to the error message above.
Found the configuration folder but on my roaming profile on the server, not on C drive.
Note that I installed Dreamweaver on the second partition of the hard disk, not on C drive due to lack of space. Other Adobe CS5 software are running well such as Photoshop and InDesign.
I have tried to delete (after backup) the Configuration folder, as I read on this forum that it should be automatically recreated, but no success. Tried to copy the Configuration folder (in fact the entire Adobe folder) to the user profile on C drive, but no success.
On this PC, no previous version of Dreamweaver has been installed. However, I have used older versions on different computers, and there are in the Adobe folder on my roaming profile traces of CS4 and CS6.
Could you please advise?

Not sure which thread you have read on this forum but I suggest read this official document and then see if resolves any lingering problems.
<http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html>
Good luck.

Bridge doesn't start

after i updated photoshop, indesign and illustrator cc
bridge doesn't start (crash until starting)

Have you searched the forum? There are several similar reports.

Why Photoshop doesn't recognize the Camera Raw modifications ?

Dear all
I'have passed to Yosemite few day ago reinstalling all the CS6 suite, but now when I open an elaborated photo from Camera Raw to Photoshop, I can't see any modifications: it's seems that Photoshop doesn't recognize the Camera Raw modifications.
Someone could help me ?

Couple of things:
1. That's not what Photoshop does. It's not an image manager, it's a file editor. So, you can set Photoshop to start when you connect your camera but it will stat and nothing will happen.
2. You need to decide how you want to manage your photos. You can do this with iPhoto, the Finder or something else. Which ever you decide let us know and we can help you set that up.

I updated iTunes to 10.4 version and now it doesn't start and sen a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regard

I updated iTunes to 10.4 version and now it doesn't start and send a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regards

Only way to get iMac starting again was to re-install 10.4.4 from DVD, and then update it into 10.4.6. For a while it worked perfectly, just as before.
Then I tried to print to CD with my EPSON Stylus Photo 950 from Adobe Photoshop Elements (2.0). It didn't print anything, but printer started flashing all lights. The print job was not performed, so I did remove it from the Printer Utility. After that the iMac started "ticking" again, same noise than before, after 10.4.7 installation. I did re-boot iMac. It never started, it does stuck on gray screen (gray block running clockwise). HW test from DVD didn't find any problems (extended search looping 3 times). But Disk Utility found hard drive to have inaccurate node structure, it could not fix it.
Apple support recommended to use DiskWarrior. However, it does not support (yet) Intel Macs. I haven't got TechTool Pro 4.5.1 anywhere. iMac does start on to FireWire mode (T at boot), but I cannot see the disk from 10.2.8 iMac.
So, obvisously the problem is not 10.4.7. I believe it to be ESPON printer driver compatibility on Mac OSX. This does not suprise me, EPSON printers *****, I shall never purchase one again. However, disk catalog structure should not get messed by one faulty printer driver!

Illustrator CS3 or 4 doesn't start up anymore

I have worked successful with CS4 but last week Illustrator won't start up any more.
When I start Illustrator there is nothing happens because it wont start up and yes, after that, my pc is hanging up (you must start up with force.
The second program from CS4 Photoshop is working good.
I have re-install CS4 but same problem (Illustrator don't startup and after that pc does nothing, photoshop is working good.
Tried CS3 to watch if Illustrator is working but same problem.
I have delete from registry, I have try WinCS3clean, cs4clean, etc. but it won't; Illustrator doesn't start up any more.
What can it be?

You're likely to get a lot more help in the Illustrator forum.
Bob

S.O.S. !!! system (tiger) doesn't start aymore

Hi! Can anybody help me please?? It's a bit of a story but maybe there are details that help you solve my prob...??
I'm ichat/isight user for more than two years now. I had all sorts of malfunctions but what's happening now's never been there before AND can't be fixed by restarting, unplugging, restarting whole system etc.
OK, this is what's happened:
-> unplugged isight from my powermac (g5) to use on powerbook G4 (as I've done succesfully before). on G4 I got ichat running after plugging in isight, then clicked "camera" symbol to check if it runs properly. The camera gave me one short glance and then froze and after that ichat completely hung up. I've shut it down (applealtesc) -> didn't show as shut (little black arrow underneath programm-sign). I had to put the G4 on standby and then log in again before the programme would shut down. I've done it twice and after the second time my G4 doesn't come back anymore at all.... :((( It only shows the grey apple and the spinning wheel (grey dots) for ages! I've taken isight away and everything (mightymouse) but still NO CHANGE!!! No matter how long I wait - My whole system never comes back!!! BUT - I'm very lucky to have my power Mac with ichat running on it properly --- as I thought.... Now, THIS REALLY KILLS ME!!! I plugged camera in again, started ichat on G5... same sh** like on G4! Ichat won't close down anymore no matter what I do!!!I've done complete restart of system... NO CHANGE!!! What have I done wrong???? Can anybody help me - please???
edit:
Just installed ichat update on G5. Was funny again, since ichat wouldn't let system close down and do restart. I had to press the button - which I hate! Feels so - er- violent! NOW ichat+isight work again properly.
BUT!!!
Can anybody tell me how to get my G4 powerbook running again??? I'd like to install the ichat update there as well, think that'll fix my problmes there - but before that I have to get into my system again... ;( No matter what buttons I press or how often I remove the battery plate - The system doesn' t start!!!! I get the greyish screen with spinning dots-wheel and then after a while I get a blue screen without ANYTHING on it no mouse arrow or any menue. WHAT CAN I DO?? There's important stuff on it I haven't done backups from yet! (it's always like that, in't it?)

Thanks for the status report, Ursula!
-- begin edit: (Ursula IM'd me while I was finishing this post)
Congratulations, Ursula!!! You got your PowerBook running. I understand that you are still working on the restoring the settings, data files, and applications, but thanks for sharing the great news. Well done!
[I leave this post for your (and other readers') possible use while you finish.]
-- end edit
Based on what you told Ralph and me in our text chat, my guess is that whatever caused your son's user session to crash is what is also crashing your G5 Finder when you attempt to copy it. Your son's User folder was probably locked by OS X when the PowerBook crashed while he was using it. I think you are doing the correct thing by moving only the important files from his (locked) PowerBook User folder.
Once you get all your son's most important files moved, I suggest you try moving one of the unlocked User folders to your G5 drive. You may be able to move the User folders (other than your son's locked one) to your G5 so you will have backups for those users.
You can try this by moving one entire User folder (not the "Users" folder with all Users inside) by option-dragging it into the folder you want in your G5's hard drive finder window. If that one works, other unlocked User folders may work, too.
Because your PowerBook had insufficient disk space for a reinstall, you were forced to interrupt the reinstall process twice. Therefore, your PowerBook may not respond to either reboots or reinstalls, even after you free up 10GB - 25GB (or even more) of disk space on your PowerBook.
If your PowerBook does not respond to your planned actions, and if you want to try one more thing before you take the PowerBook to an Apple Technician, my best suggestion is that you erase and "zero" the disk using Disk Utility. (Disk Utility Help will tell you how to do this.) Use the "Mac OS Extended (Journaled)" format setting, and select the "Zero Out Data" setting in the "Security Options" pop-up.
You can perform the erase and zero either in the Target Disk Mode or by using the Disk Utility application on your PowerBook's "Install" DVD. Either way, it may take more than an hour to Zero the disk, but "zeroing" should get rid of whatever caused your son's session to crash. If you want more specifics about this, post back or contact me via iChat when I am online.
Once you have the disk erased, reinstall everything that you need using your PowerBook's "Install" DVD. After the install is finished and you restart your PowerBook, repair Disk Permissions ("Rights" auf Deutsch?). Then apply the Mac OS X 10.4.8 Combo Update (PPC) that I linked in my first response above.
Follow the Combo Update with one more repair of Disk Permissions. If you get this far, you can reinstall your other necessary software apps and then restore the data you need from the backups you have.
If the above process does not work, your PowerBook may need to see the Apple Service Technician.
You told me in our chat that you work on very large files. Therefore, you will need to regularly perform the kind of Mac OS X Maintenance described in the "Maintenance" link in my first response above. I do a lot of large video and PhotoShop image editing. To keep my Mac running fast and reliably, I do the routine maintenance on a regular schedule, and I try to keep at least 35% - 50% of my startup disk free. I never let my 160GB startup disk get more than 75% full. I offer this info so you will know how important free space is in the Ma OS X startup disk. If you need more space, backup some files and remove them or add another disk drive, but do not let your startup disk get too full on any of your OS X Macs.
One final note: because you had to force a shutdown (hold in power button until the G5 turned off) on your G5 last night, you should do a safe boot on the G5 as soon as possible. You can find detailed instructions for Safe Boot from the "Maintenance" link in my first response above, but I will give you a short version here:• Restart your G5.
• As soon as the startup chime sounds, press and hold the <shift> key.
• Release the <shift> key when you see the spinning gear on the monitor.
• Let the machine run until the desktop is visible. (In 10.4.8, you will be asked for your administrator password before you get the desktop.)
• After the desktop and menu bar are visible, you should do a normal "Restart" to finalize all needed actions. Do not do anything other than restart while in Safe Boot mode or you risk leaving the Safe Boot actions unfinished.Once your Mac is restarted, you can return to your G5's normal routine maintenance schedule.
Let us know how things progress or if you need anything else.
Jim
Mac OS X (10.4.8) G5 DP 1.8

"Photoshops doesn't work anymore"

When I try to start Photoshop on my laptop, it shows me a message: "Photoshop doesn't work anymore"
I have windows 8 and 32 Bit
I have seen some posts where people had the same problem and solutions, but this solutions don't help me very much.
Please Help.

reset your preferences, Photoshop Help | Preferences
if that fails to solve the problem, uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Recently my phone updated itself to ios 7, it wont let me sign into my iphone app store to download apps,i click on an app i want it just clicks but doesn't start to download any help?

recently my phone updated to ios 7, it wont let me sign into my iphone app store to download apps,i click on an app i want and it just clicks but doesn't start to download, i can see thats its not signed in so i tried to re set up my account under the app store in settings , but its just a grey area and wont let me click to input any information. this happened right after i updated my phone, any help?

Hi SarahHannah,
If you are having trouble activating iMessage, this article contains relevant troubleshooting steps:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Take care,
- Ari

SAP NETWEAVER COMPOSITION ENVIRONMENT 7.1 EHP1 - System doesn't start

Hello, 
 
after i get the message the installation was succesfully and i start the server the proces jstart.exe 
 
doesn't start completely. 
 
in the trace file dev_jstart in find this error message: 
 
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE 
F arg[ 1] = -nodeId=1000 
F arg[ 2] = pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_sjodevb1 
F arg[ 3] = -DSAPINFO=CE1_00_collector 
F arg[ 4] = -hostvm 
F arg[ 5] = -nodeName=collector 
F arg[ 6] = -file=D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties 
F arg[ 7] = -jvmFile=D:\usr\sap\CE1\J00\work\jstart.jvm 
F arg[ 8] = -traceFile=D:\usr\sap\CE1\J00\work\dev_collector 
F arg[ 9] = -javaOutFile=D:\usr\sap\CE1\J00\work\jvm_collector.out 
F arg[10] = -clusterId=bootstrap 
F arg[11] = -exitcode 
F arg[12] = 503 
 
an in the tracefile log_bootstrap.0 this error message: 
 
[Nov 19, 2009 5:17:50 PM ] Exception of type com.sap.sql.log.OpenSQLException caught: Could not load class com.sap.dbtech.jdbc.DriverSapDB with class loader com.sap.engine.offline.FileClassLoader@6caf16..
[EXCEPTION]
com.sap.sql.log.OpenSQLException: Could not load class com.sap.dbtech.jdbc.DriverSapDB with class loader com.sap.engine.offline.FileClassLoader@6caf16.
 at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:104)
 at com.sap.sql.connect.factory.VendorConnectionFactory.createInstance(VendorConnectionFactory.java:210)
 at com.sap.sql.connect.factory.VendorConnectionFactory.createVendorDriver(VendorConnectionFactory.java:43)
 at com.sap.sql.connect.factory.DriverPooledConnectionFactory.<init>(DriverPooledConnectionFactory.java:31)
 at com.sap.sql.connect.datasource.DataSourceManager.createPooledConnectionFactory(DataSourceManager.java:546)
 at com.sap.sql.connect.datasource.DataSourceManager.createDataSource(DataSourceManager.java:505)
 at com.sap.sql.connect.datasource.DataSourceManager.createDataSource(DataSourceManager.java:136)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.getDataSource(OpenSQLDataSourceImpl.java:272)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:208)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:357)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:157)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:48)
 at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:127)
 at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:262)
 at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:39)
 at com.sap.engine.bootstrap.HelperImpl.getConfigurationHandlerFactory(HelperImpl.java:38)
 at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:111)
 at com.sap.engine.bootstrap.Bootstrap.initializeSynchronizer(Bootstrap.java:74)
 at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:229)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: java.lang.ClassNotFoundException: com.sap.dbtech.jdbc.DriverSapDB
 at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:909)
 at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:800)
 at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:748)
 at com.sap.sql.connect.factory.VendorConnectionFactory.createInstance(VendorConnectionFactory.java:206)
 ... 22 more
 
 
any idea? 
 
 
thank you for your help 
thomas 

Hi Angie,
You will find the needed information here - http://service.sap.com/~form/handler?_EVENT=DISP_NEW&_APP=00200682500000001303&00200682500000002804=01200615320900001418
Release to Customer Available 09.05.2007
Default Release Available 14.12.2007
Good Luck!!!
GLM

Photoshop 7 doesn't start

Similar Messages

Maybe you are looking for