• Photoshop "action" doesn't work well for big file?

Hello -
I made a Photoshop® script (action) which works perfectly…
(Open .PDF files in Photoshop®, to after save them as .JPG files into another folder)
The problem comes when I launch a batch process.
It takes a while to the computer to open the large .PDF files, and when a file is opened,
well it doesn't go through the whole script. In fact, Photoshop® already open the second file and so on.
Then without running the rest of the script/action
NB. I work with the CS5 version of Photoshop® (on Mac).
Thank you for any input.
Have a nice day…
- Dimitri

Hello Curt -
I work on a MacPRO 8core (4 years old) with 16GB of RAM.
I have a 300GB HD as "scratch disk" (almost empty)…
- Dimitri

Similar Messages

QuickTime movies cannot display properly, refresh doesn't work propely for html files on hard disk, opening a new tab doesn't work

Hi!
I have tried Firefox V4 (but have since reused V3.6.16). The following problems were found:
a. Cannot display the controls used for QuickTime movies.
b. The refresh button doesn't function at all if the html files reside on the hard disk. I do this because I need to test the appearance of the web page before uploading to the server.
This problem also exists for v3.6.14 to v3.6.16
c. When opening a new tab, it doesn't work. Instead, it will open another instance of the browser. By right, it has to open the web page on the same instance of the browser.
This is my feedback.
Thanks!!!!! :)

I had some advice to try recording QT audio and adding to the slide. Now, when recording to Quicktime, it does embed it, but in recording the presentation, it either doubles up the audio giving a strange echo or does the same thing if you ever edit the presentation.
The problem Keynote has is that the sound and image content are not locked together which causes out of sync errors. This is why many users choose video editing applications when using sound in the presentations, as they have both image and audio tracks to sync sound properly together.
Start a new presentation to remove the previous sound recording, Keynote is holding onto the other sound files.
Add the graphic items to each slide and one sound file to each slide for the voice over
1 - In Inspector > Transitions; use start transitions automatically and set each transitions delay to the duration of the individual sound file.
2 - In QT export, set Fixed Timing and delete the value in the duration box, QT will then use the custom timings for each individual slide.
This procedure does work exactly as needed, Iv used this for nearly 6 years using 4 different versions of Keynote.

Shared Server mode doesn't work well for no-adm users

hi,
please... my question is...
i put the database in shared server mode, setting the correctly parameters, as follow below:
NAME.......................................VALUE......
max_shared_servers............................
shared_servers....................................3
shared_server_sessions.......................3
dispatchers.........................................(PROT=tcp)(DISP=3)
the listener services show me as below:
LSNRCTL> services
Estabelecendo conexÒo com (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=orcl)))
Resumo de Serviþos...
O serviþo "PLSExtProc" tem 1 instÔncia(s).
InstÔncia "PLSExtProc", status UNKNOWN, tem 1 handler(s) para este serviþo...
Handler(s):
"DEDICATED" estabelecido:0 recusado:0
LOCAL SERVER
O serviþo "orcl" tem 1 instÔncia(s).
InstÔncia "orcl", status READY, tem 4 handler(s) para este serviþo...
Handler(s):
"D002" estabelecido:0 recusado:0 atual:0 mßx.:1002 estado:ready
DISPATCHER <machine: WINXP, pid: 1372>
(ADDRESS=(PROTOCOL=tcp)(HOST=WinXP)(PORT=2509))
"D001" estabelecido:1 recusado:0 atual:1 mßx.:1002 estado:ready
DISPATCHER <machine: WINXP, pid: 3384>
(ADDRESS=(PROTOCOL=tcp)(HOST=WinXP)(PORT=2508))
"D000" estabelecido:1 recusado:0 atual:1 mßx.:1002 estado:ready
DISPATCHER <machine: WINXP, pid: 3396>
(ADDRESS=(PROTOCOL=tcp)(HOST=WinXP)(PORT=2507))
"DEDICATED" estabelecido:0 recusado:0 estado:ready
LOCAL SERVER
O serviþo "orcl_XPT" tem 1 instÔncia(s).
InstÔncia "orcl", status READY, tem 4 handler(s) para este serviþo...
Handler(s):
"D002" estabelecido:0 recusado:0 atual:0 mßx.:1002 estado:ready
DISPATCHER <machine: WINXP, pid: 1372>
(ADDRESS=(PROTOCOL=tcp)(HOST=WinXP)(PORT=2509))
"D001" estabelecido:1 recusado:0 atual:1 mßx.:1002 estado:ready
DISPATCHER <machine: WINXP, pid: 3384>
(ADDRESS=(PROTOCOL=tcp)(HOST=WinXP)(PORT=2508))
"D000" estabelecido:1 recusado:0 atual:1 mßx.:1002 estado:ready
DISPATCHER <machine: WINXP, pid: 3396>
(ADDRESS=(PROTOCOL=tcp)(HOST=WinXP)(PORT=2507))
"DEDICATED" estabelecido:0 recusado:0 estado:ready
LOCAL SERVER
O comando foi executado com Ûxito
LSNRCTL>
are the parameters correctly, aren't they ?
when i connect by scott user for example, i have the follow result below, accessing the informations by V$SESSION view:
USERNAME............STATUS........SERVER.........SCHEMANAME
SCOTT....................INACTIVE......DEDICATED ....SCOTT
SYS........................ACTIVE.........SHARED..........SYS
SYS........................INACTIVE......SHARED..........SYS
SYS........................INACTIVE......DEDICATED.....SYS
why the SCOTT username show me that it's connection is by DEDICATED server ?
thanks

no Legatti,
it isn't in my tnsnames.ora. The content is:
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\NETWORK
\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL_IPC =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(Key = orcl))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = orcl)
(HS = OK)
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = WinXP)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = WinXp)(PORT = 1522))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)

Photoshop action replacing previous photo not saving new file

I have multiple photos that I am running an action on but each photo is replacing the one before using the same file name. instead of using the original file name. So I end up with 1 edited photo!!! from the action!
This is happening using cs5 I have not encounted this before.
Any ideas?
Rob

Thanks R-Kelly
I sorted as images imported via drop box were file named !!
2012-10-15 00.13.26.jpg ,
2012-10-15 00.14.15.jpg etc
I think photoshop action could not work with the odd file naming???
So re-imported using image browser with file names image_01.jpg, image_02.jpg etc and worked
On cs5.1 on mac os x
Thanks Rob

Lighting effects in Photoshop CC doesn't work for me ... just shows ALL black .. any advice to get it to do what it is supposed to?

Lighting effects in Photoshop CC doesn't work for me ... just shows ALL black .. any advice to get it to do what it is supposed to?

So, you're totally new to computers?
Go to the Help menu in Photoshop and select the System Info menu item. Copy all that information and paste all of it here MINUS your serial number.
Yes, Photoshop can delegate a lot of the computing tasks to the GPU on your graphics card. You may have to disable that feature in Photoshop Preferences > Performance.

I just downlouded the latest version of the Muse CC and it doesn't work well, it freezes all the time, in particular with the tools. Example the selection tool doesen't wor at all.

I just downlouded the latest version of the Muse CC and it doesn't work well, it freezes all the time, in particular with the tools. Example the selection tool doesn't wor at all. Is there any solution for this problem?

Hi!
I restarted the computer, but the same issue happens again. When I move my mouse over some object or tool, it doesn’t come active at all (only some of the tools works) When I try to change “site properties”, I can’t choose tablet or phone mode or even I can’t select the checkboxes, only thing what I can do is change the numbers (high and width) . After all the main problem is that I can’t select some of the items or functions by mouse, but only by the keyboard.

Edit in Photoshop CS6 doesn't work with Nikon D800E NEF files in LR 4.1 RC

The "Edit in Photoshop CS6" menu item or shortcut (cmd+e) doesn't work for NEF files from a Nikon D800E in Lightroom 4.1 RC. What happens is that LR looks like it goes through all its normal paces, and launches Photoshop, and the CPU spins, but then nothing happens in Photoshop, the image never opens.
This works fine for NEF files from other cameras.

Set up CS6 as an secondary editor, and then it will use LR's built-in ACR to process the files, instead of the external ACR with CS6. The external ACR 6.7 also processes D800, just not ACR 7 just yet.
Bob Frost

Audio out port doesn't work well

Hi, I have a Macbook Pro 13-inch, Early 2011. Since I bought it I always use my Mac whit headphones, but since a month it only works well the left headphone. I think that the problem it was my headphones but no, because I used it on my phone and workes well. So i come to the conclusion that the audio out port doesn't work well. What you think? And what you recommend to me to fix this problem?

Probably still under warranty, but not for long. Take it to the Apple Store or AASP to have it checked ASAP.

End action doesn't work

Okay, it doesn't matter what I do end action doesn't work. Here's the situation. I have three timelines. The Title for starting, the main video, and the credits rolling at thend. When the Title timeline is done playing at the end, it should go to the main video and the main video timeline is done, it should go to the credits but it's not working. In each of the End action of three timelines, I did specify where it should go next. But this doesn't work. So I try to specify where it should go next on the End Action of the last chapter for three timeline but that doens't work either. So I tried specify in the last chapter and also the timeline end action and nothing changes during preview. Please help.

Stupid question:- what exactly does the override do? Override the remote control action, or the end action or both?
Linking each chapter to the next, and the next timeline, allows for the whole project to play continuously, but the end action on the final chapter is always messing things up.

Sun one server 6.0 doesn't work well with explorer

We've sun one server 6.0 sp4 running in a sparc server as SSL server and too as common server on port 80. The most our clients , 95%, are explorer browser users.
The server has known bugs with SSL3 , interoperatibility with MSIE problem 532427. The solutions suggested in the server documentation don't work. We tryed the solutions suggested many times and in few time we got complaints from clients, people get "this page can't be displayed". I had to set the server to work with SSL2 only , althought security's reports tell that this protocol is not safe.
The second bug is concern the latencies loading pages with explorer. I apply the solution suggested, KeepAliveQueryMeanTime 1, it doesn't work well too. We don't feel the latencies on new machines or light browsers as avant , but we still feel these latencies with old machines or if the users uses modem. A lot of people still see very strong latencies.
I feel the server wasn't tested enough with explorer browser , it has so many compatibility problems with this browser.I think for the most webmasters the perfect compatibility with explorer is very important.
We payed for this server and it is worst than apache ,apache group fixed the SSL problem long time ago. Only one thing we need doesn't work well in apache then we contenue to use sun one server. But this diference is not enough to justify the use of this server if sun don't fix these problems. I'm talking about problems they exist more than 1 year, they were when i installed the server then i contenue to work with iplanet 4.1 and SSL2. I read the new version server characteristics, version 6.1 , i didn't find anything telling that these problems were fixed.
Yair Lapin
Hebrew University Webmaster

Yair -
Unfortunately this is a little vague. Can you tell us specifically what problem(s) you're having (unfortunately your current message does not go into adequate detail for us to understand the problems you see, or to make recommendations about how to remedy them).
Thanks
Joe

Yosemite and Photoshop Elements doesn't work. Can anyone help

I have recently updates my mac software to Yosemite and Photoshop Elements doesn't work. Can anyone help

Hi,
We sincerely apologize for the problem customers are facing while using a trackpad with Photoshop Elements 11 & 12 on Mac OSX 10.10 (Yosemite).
We have been actively working with Apple to resolve this problem as quickly as possible. We're hopeful this will get completely resolved in an upcoming update of Yosemite(MAC 10.10).
In the meanwhile, you have two options to work around this problem:
1. Option1: Use a mouse instead of the trackpad
2. Option2: Install a plug-in which should workaround the problem
Plug-in installation instructions:
1. Close Photoshop Elements
2. Download this zip file to a location you can easily find (e.g. your desktop)
3. Unzip the file, WhiteWindowWorkaround.plugin, and move it to the Plug-In folder:
• For Elements 12 – //Applications/Adobe Photoshop Elements 12/Support Files/Plug-Ins/
• For Elements 11 - //Applications/Adobe Photoshop Elements 11/Support Files/Plug-Ins/
You can verify the plug-in is installed by launching the Photoshop Elements Editor and choosing Help > System Info... Scroll to the bottom of the text in the dialog and look for the plug-in name "WhiteWindowWorkaround.plugin".
Note: This plugin is a temporary workaround and should be used until this issue is addressed in Mac OSX 10.10 (Yosemite). Please remove this plugin once the issue is officially resolved by Apple.
If you are using a stylus in conjunction with a trackpad, you might see issues with your trackpad. Workaround in this particular case is to use mouse instead of the trackpad.
Hope this helps!
Regards,
vaishali

My photoshop cc doesn't work. "_crtCreateSymbolicLinkW not found in DLL "C.\Windows\SYSTEM32\MSVCP110.dll"". Please help

my photoshop cc doesn't work. "_crtCreateSymbolicLinkW not found in DLL "C.\Windows\SYSTEM32\MSVCP110.dll"". Please help

I checked my windows 7 pro machine for the module I see many copies if the DLL with different dates two different sizes all are version 11.0.51106.1 so I guess there are 32bit and 64bit versions. Some are in Adobe folders some in Wacom folders ad in two windows folders including system32. I do not know if there is and entry point "_crtCreateSymbolicLinkW" in it.

My Mail on my mac doesn't working well

Why my Mail on my macbook pro doesn't working well, I couldn't see the content of my e-mail messages. how do I do? I tried to reinstall my Mail, and I couldn't fix it. Please help me

These fixes have helped others, depending on the situation.
Have an up-to-date Time Machine or other backup before attempting any major software updates or rebuilds.
For more about backups:
Time Machine Basics: http://support.apple.com/kb/ht1427
Most commonly used backup methods:
https://discussions.apple.com/docs/DOC-3045
Methodology to protect your data. Backups vs. Archives. Long-term data protection:
https://discussions.apple.com/docs/DOC-6031
Make sure your software is up to date.
Apple > Software Update...
A general repair to fix odd behaviors in Mail is Mailbox > Rebuild.
Try booting in Safe Mode.
          Boot and when you hear the bong hold down the Shift key.
          It will boot slowly. Be patient.
          Login the the user account.
          Restart.
Another fix:
Shut down Mail.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Copy and paste the following
~/Library/Mail/V2/MailData/
Click Go.
Move all "Envelope" files to your desktop.
Restart Mail and let it convert/reindex your mailboxes.
If this worked, Trash the Envelope files file that are on your desktop,
if not shut down Mail and put them back.
Another fix:
Shut down Mail.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Copy and paste the following:
~/Library/Containers/com.apple.mail/Data/Library/Caches/com.apple.mail/Cache.db
Click Go.
Move the Cache.db file to the Trash.
Restart your Mac and try Mail.
Another fix:
Open the Finder. From the Finder menu bar click Go > Go to Folder
Copy and paste the following
~/Library/Mail/V2/MailData/
Click Go.
Move all the Accounts.plist to your desktop.
Restart Mail.
If this worked, Trash the Accounts.plist file that is on your desktop,
If not shut down Mail and put it back.
You can try restoring mail from a Time Machine backup.
Hold down the Option key and in the Finder Go > Library
Enter Time Machine.
Select a date and time from when Mail was working.
Restore Mail.

My home key doesn't work well, and my warranty has been expired. what can I do?

my home key doesn't work well, and my warranty has been expired. I have to press very hard to light the screen.

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
-You can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

The Runtime.exec methods doesn't work well on Solaris ???

I have two threads and I set the different running time.
I use Runtime.exec to a run the command and use Process to get the process.
It works properly in the windows2000 platform.
However, when I transfer the platform to Solaris...and run the program...
Two threads always at the same time....It is very wired....I always debug
for 2 days....
(at first I run "vmstat 1 2" command, later I change to "ls","rmdir"....etc,
all of them don't work.....
If I close the Runtime.exec..........Everything works well......)
And I study the API. I found this message...
The Runtime.exec methods may not work well for special processes on certain
native platforms, such as native windowing processes, daemon processes,
Win16/DOS processes on Win32, or shell scripts. The created subprocess does
not have its own terminal or console.
Could someone share her/his experience.....:(
And if any other way I can run command inside java code instead of
Runtime.exec.....???
Please reply my mail to [email protected] I do appreciate your kindly &
great help!!!!!!!!
This is my code.......
import java.io.*;
import java.lang.*;
import java.util.*;
* <p>ServerThread1</p>
* <p>??�X???��?�D???�X???, "Vmstat 1 2".</p>
class ServerThread1 extends Thread{
private ServerAgent Sa;
public ServerThread1 (String Name, ServerAgent Sa){
super(Name);
this.Sa = Sa; file://Assign ServerAgent reference Sa
public void run(){
while(true){
try{
Thread.sleep(5000);
catch (Exception e){
System.out.println("ServerThread1 fails");
System.out.println("Thread1 is running.");
try {
Runtime rt1 = Runtime.getRuntime();
Process proc1 = rt1.exec("mkdir"); ------>If I close
rt1.exec , two threads works seperately...........:(
catch (Exception e) {
System.out.println("Thread1 Error");
class ServerThread2 extends Thread{
private ServerAgent Sa;
public ServerThread2 (String Name, ServerAgent Sa){
super(Name);
this.Sa = Sa;
public void run(){
while(true){
try{
Thread.sleep(15000);
catch (Exception e){
System.out.println("ServerThread2 fails");
System.out.println("Thread2 is running.");
try {
Runtime rt2 = Runtime.getRuntime();
Process proc2 = rt2.exec("vmstat 1 2"); ----->If I don't run
the rt2.exe, two threads work seperately....
catch (Exception e) {
System.out.println("Thread2 Error");
public class ServerAgent{
private Vector v1 = new Vector();
private Vector v2 = new Vector();
private Hashtable currentData = new Hashtable();
private static String startUpSwap = null;
private static String startUpMem = null;
public static void main(String[] arg) {
ServerAgent s = new ServerAgent();
ServerThread1 st1 = new ServerThread1("Thread1",s);
ServerThread2 st2 = new ServerThread2("Thread2",s);
st1.start();
st2.start();

If I close the Runtime.exec..........Everything works
well......)You don't empty the output of the command, that blocks the process.
A citation from
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html
Why Runtime.exec() hangs
The JDK's Javadoc documentation provides the answer to this question:
Because some native platforms only provide limited buffer size for standard input and output streams, failure to promptly write the input stream or read the output stream of the subprocess may cause the subprocess to block, and even deadlock.
Try out something like this:
String s;
try {
   Process myProcess =
   Runtime.getRuntime().exec("ls -l"));
   DataInputStream in = new DataInputStream(
          new BufferedInputStream(myProcess.getInputStream()));
    while ((s = in.readLine()) != null) {
        out.println(s);
catch (IOException e) {
    out.println("Error: " + e);
}Another source of trouble under Unix is not having the correct permission for that user that executes the Java VM, which will be the permissions for the spawned subprocess. But this probably not the case, as you see something after exit.
Regards,
Marc

• Photoshop "action" doesn't work well for big file?

Similar Messages

Maybe you are looking for