Photoshop and Wacom/Corel

In the Adobe Photoshop "Classroom in a Book" there was a suggestion to use a Wacom tablet.  I bought one which came with Corel Painter Essentials. Big mistake. The Bamboo worked fine but Corel Elements would not load.  I tried Tech support for Corel (would never respond) and Wacom since they sold the product - they offered no solution.  Said they had seen the problem frequentely but that was the end of the support. both products went into the trash.  the moral of the lesson, stick with Adobe!!

yes, I have about 15 sub-folders in my "Pictures" folder. When I go to get
photos when I am in  the Organizer I click on a particular sub-folder and the
check mark jumps to another folder in my "Picture".  Now, if I move that folder
to my Desktop I do not have that problem. But then when I move it back to my
"Picture" I have to reconnect them again.
hope this helps
tim
Tim Kavulla
3607 Plum Hollow Drive
Houston, TX 77059
(H) 281-480-4715 (c) 832-444-2675
[email protected]

Similar Messages

  • Photoshop and wacome Intuos issue question?

    Hi
    a week ago , a friend of mine , did lent a wacome intuos
    i installed it
    well now i gave it to him
    how can i do a clean install of the wacome drivers/software?
    and should i reset photoshop preferences?
    i mean does photoshop cs6 or cc changed his preferences when i use the tablet?
    thanks

    because i noticed a mice and keyboard lag after i uninstalled the wacome drivers

  • I am self employed and I want to be able to offer private tuition in PhotoShop and Illustrator, alongside Corel PaintShopPro and MS Office that I already teach. Can I get these two products, or all, at the 'educational' price?

    I am self employed and I want to be able to offer private tuition in PhotoShop and Illustrator, alongside Corel PaintShopPro and MS Office that I already teach. Can I get these two products, or all, at the 'educational' price?

    Not that I know. S&T pricing only applies to verified institutions. Could well be that you may need to fill out a paper with whatever governmental authority is responsible on the planet you live, but otherwise you're just a private business like any other and would most likely deduct the expenses from your tax bill...
    Mylenium

  • Tablet PC calibration error in Adobe Photoshop and Illustrator CS3 whilst in Extended Desktop Mode

    Hey everyone!
    I've run into a snag which hasn't bugged me before because I never used a second monitor, but now that I do, Photoshop and Illustrator don't function properly.
    I am running my Adobe products on my Lenovo X61 Thinkpad Tablet, which is Wacom PenEnabled. It's got the basic digitizer pen and pen pressure features, no stylus tilt or anything.
    Whenever I run Photoshop or Illustrator in Extended Desktop Mode so I can have a different window open on my external monitor and the Adobe app on my tablet screen, my stylus goes strange. It seems to think that the extended desktop is part of the Adobe window, so when I move my stylus to draw, the cursor will appear on the external monitor, usually proportionate to the size of the screen...ie. It interprets the external and tablet screens as one desktop and the top left corner of my tablet screen is the top left of my external, whilst the bottom right on tablet IS the bottom right on tablet, if that makes any sense...sorry.
    So I can't draw anything in photosho unless I set it back to standard desktop mode, or mirrored desktop. I've searched over the net and these forums and I can't find a fix for this. I was walking in harvey norman the other day and the Wacom Cintiq 12" was there on display, and it had the same issue with extended desktop and photoshop.
    Has anyone had this issue before and/or does anyone know of a fix for it? I'll keep searching around and playing with the computer until I fix it and I'll post any solutions I find here if noone else has one.
    My system details are:
    Abobe Photoshop CS3 10.0.0
    Adobe Illustrator CS3 13.0.0
    OS: Windows Vista Build 6001, Service Pack 1, 32bit
    RAM: 2GB
    HD: 18.2GB free Disk Space (out of 66.3GB on the Active Partition)
    Video: Intel GMA: Mobile Intel(R) 965 Express Chipset Family

    I'm using an HP tx2011au tablet pc, using adobe flash cs3 and have the exact same problem. it becomes decalibrated only while the flash window is open, and only while flash has a file open, and only when using an extended desktop. even if flash is open and it has no files open it works fine.

  • Photoshop and OS/X Mavericks - disappearing menus

    This may have been covered already, but I didn't see an answer for it in the forums. Basically, all of the menus in Photoshop CC seem to occasionally blank out, and this has only started happening for me since I upgraded to OS/X Mavericks. It doesn't happen in any other program, and there doesn't seem to be any way to tell when it's going to happen. Is there a fix for this, aside from quitting and re-starting the program?
    Some additional info: I'm using a mid-2009 Macbook Pro with 8GB of RAM. I've swapped out the optical drive for a second hard drive and I've done a clean install of the operating system, Photoshop, my Wacom driver and Capture One Pro (and nothing else) in an effort to see if there were conflicts with some other random software. It didn't help.

    For product specific questions you may do better in the specific product forum
    If you start at the Forums Index http://forums.adobe.com/index.jspa
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right to open the drop down list and scroll

  • Photoshop and Premiere Elements Upgrade to V8

    Hi,
    I am very annoyed with Adobe. I just bought a copy of Photoshop and Premiere Elements 7 on Friday and guess what???
    I have obviously opened and installed it and used it a bit. I cant believe that Adobe didnt mention/promote V8 in any way.
    Anyway, does anyone know if there is a free upgrade to V8? Or is there a way I can reject V7 and get Adobe to exhchange it for V8?
    Cheers

    I agree. Adobe has always been great at this, unlike some other software companies. Corel comes immediately to my mind. Seems that they offered a US$20 off of the upgrade price, when Painter XI came out, and one had just bought Painter X. Whoopie!
    Going back a bit, Adobe did not even charge shipping and handling for media, within the 30 days. One got the full box with manual (if provided), and new discs. Do not know exactly how downloads are handled, as I have never gotten any Adobe product, except in the full-boxed form.
    If you purchased from the Adobe Store, they'll have your S/N and records, but I've have a copy of my receipt handy, just in case. If you bought from a retailer, have that receipt and S/N, when you make the call.
    Good luck,
    Hunt

  • Issue with Healing Brush and Wacom Tablet

    I use a Wacom Intuos 4 for retouching. Photoshop CC 2014 gets stuck when I use the healing brush. I hold the Alt-key down and take a sample with the healing brush, and when I go to paint and the cross-hair gets stuck inside of the circle and the tool stops responding. After I remove the pen from the tablet I get the round spinning little balls as Photoshop is thinking and then everything works again. It's very annoying when retouching skin. It doesn't do it every time I use the tool just at random. Anyone else having this issue? I've tried many different driver versions for the Wacom and it does it no matter what version. I've also reset the tool. I've done everything but reformat the hard drive. I'm using windows 7 64bit.

    I got a response from Wacom Support about this issue.
    Actually this is a known issue with Photoshop CC 2014. This is a third party application. You have the current driver for windows 7 and the tablet works fine. Wacom ensures that your tablet works perfectly for any issues except third party application support. I would recommend that you tried contacting Adobe regarding this.
    Customer Support Team
    WACOM
    Great. All I got from contacting both Adobe and Wacom support was finger pointing and acknowledgement of a problem. At this point any help with this issue would be greatly appreciated.

  • I keep getting 'camera raw editing now enabled, camera raw requires that a qualifying product has been launched at least once to enable this feature' i have run photoshop and the mini bridge in photoshop and it works. camera raw in bridge itself keeps giv

    I tend to use Bridge ALOT and just recently i have come across the warning message above, t won't let me open my RAW images in Camera Raw in Bridge. Please could someone help me solve this problem it has hulled my work and its pilling up behind me
    Thank you

    Details, please.  Platform, exact version of Photoshop and of your OS, what trouble shooting steps you've taken so far, etc,
    First thing to try, if it had worked before, is to Purge the Cache in Bridge.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • What is the optimum core configuration for a new Mac Pro to process and manipulate very large (80 megapixel) images using PhotoShop and Camera Raw?

    Hello:
    I will be using creative techniques to process and manipulate a large number (hundreds) of very large (80 megapixel) images captured using a medium format digital back (Phase One IQ180).
    Final output will be digital fine art imagery printed using an Epson 11880 at large sizes (up to 60 inches x ?), retaining the highest possible quality and resolution. I will be using Adobe CC PhotoShop and Camera RAW as well as Capture One software. PhotoShop filters will be used extensively.
    The Mac Pro needs to be optimized for the above purpose and be useful for at least five years. I plan to max out all the other options (RAM, graphics cards, storage). Performance is more important than cost.
    The few discussions I have found that mention optimum core configurations seem to lean toward 6 or 8 (but likely are not taking into consideration my need for manipulating a large number of very large files), so I am looking to this foum for opinions.
    Thank you,
    Kent

    See if this helps
    http://macperformanceguide.com/index_topics.html#MacPro2013

  • Can't open CR2 files in photoshop and camera raw

    This weekend I rented a Canon 5D Mark iii. I have downloaded the files and all of the thumbnails in camera raw say CR2 and when I try to open Photoshop does not recognize this product.
    I have:
    Photoshop CS4
    Camera Raw CS4
    Canon 5D Mark ii
    I have checked my updates folder and all my updates are current. Do I need to upgrade to CS5 or is there a way around this?

    Hi I recently had a problem opening CR2 files in PHotoshop cs4. I had to reinstall into a new computer, so obviously it installed the basic programme and not the updates.
    After trying everything, even calling the help desk, there was apparently nothing that can be donw as they no longer support cs4.
    I kept trying and found a you tube video, which i cant find again to add the link but i followed the link and with what I did earlier I can now open CR2 files in my photoshop cs4
    I found the relevany update that I needed to install and downloaded it, camera raw 5.2 ( Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 5.2 update )  this is the one for the Canon 5d Mk2
    After downloading it would not update the progeramme so I was in the same possition, but i noticed the files were there and i just needed to put them in the right place in photoshop so carried on looking for were to put the Plus In.
    This led me to the video.
    To the point.
    Download the update and save to a location where you will remember.
    open Adobe photoshop and go to "edit"
    Them " Preferences "
    then "General "
    Then " Plus-Ins"
    At the top you will see " Add Plug-Ins Folder " Check this box then navigate to the "win64" ( this is because mine is a windows 64 bit computer and the download is specific ) and Choose it.
    Shut down photo shop and try to open a raw.
    Bridge doesnt work for some reason but im going to keep looking.
    Hope this works for you as well.

  • Is Adobe Bridge included in my Creative Cloud Subscription. I have the Photoshop and Lightroom subscription for Mac

    Is Adobe Bridge included in my Creative Cloud Subscription. I have the Photoshop and Lightroom subscription for Mac

    Addendum: I can find this on Adobe's Acrobat DC FAQ page:
    Can I get Document Cloud services if I’m an active Creative Cloud Member?
    Yes. Many Creative Cloud plans include Acrobat Pro DC with Document Cloud services. Explore Creative Cloud plans.
    However, if I follow the link to Creative Cloud plans, there is nothing to tell me whether Acrobat Proc DC is included in any of the plans. My plan is a yearly individual at $49.99/month.

  • By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

    By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

    A Cloud subscription provides for installing working installations on two machines.  You can have mixed operating systems (both Windows and Apple's OX).

  • What is difference between adobe photoshop  and photoshop extended cs5

    what is difference between adobe photoshop  and photoshop extended cs5

    Hi,
    The biggest difference is the 3D feature set is only available in Ps Extended CS5. Exclusive to Extended CS5 also are timeline for video editing, Dicom format support, Stack mode blending, analysis measurement tools, and some 32-bit painting capabilities.
    Some things have changed for the Photoshop Extended CS6 version, mainly enabling more of the video editing features for both products.
    regards,
    steve

  • When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this

    When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!

    Hi,
    Please download the updates directly from the link below:
    WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
    MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
    Regards,
    Sheena

  • Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my Canon Mark III 5D Camera.

    Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my new Canon Mark III 5D Camera.  How can I get my files open to view and edit?  I am using LR3, Photoshop CS3 and Bridge CS3.  Do I need to upgrade these programs or is there another way to get these programs to recognize my files?
    When I try opening the raw images in Lightroom, the thumbnails say "Preview unavailable for this file"  ... when I click "import" an error message pops up that says "The files are from a camera which is not recognized by the raw format support in Lightroom."
    When I try opening the raw images in Photoshop, an error message pops up saying "could not complete your request because photoshop does not recognize this type of file."
    When I try opening the raw images in Bridge, it just shows an icon with the file name and CR2.
    Please help!!!

    Unless I missed an announcement, today, LR6 isn't available, yet, right?  Only Adobe employees and beta testers would know what LR6 does differently at this point and they're all sworn to secrecy.
    LR5 is available as a standalone version.
    PS-CS6 is available as a serial-number-licensed version.
    PS-CC + LR5 are also available as a Photography Plan subscription for $10/month with a minimum OS versions of OSX 10.7 (and probably 10.8, soon) and Windows 7.
    Bridge is part of PS, not a separate program.
    LR5 standalone and LR+PS-CC plan are both available on this page:  http://www.adobe.com/products/catalog/software.html
    PS-CS6 can be found on this page:  Creative Suite 6 which can be found by searching www.adobe.com for Photoshop CS6 and clicking the Buy link in the on-the-fly search results.
    As with any new Adobe software, it might be wise to run it in trial mode for a few days/weeks to see if it works well with your computer, before purchasing and finding out you might need a new computer, first.

Maybe you are looking for