Photoshop animated smart object to Flash??

Hey All,
I could use a little help here, I am working on this project for a company and they need it to be animated. I tried using Photoshop's animation capabilities, but could only go so far with that. So I'm working on it in flash now. I have managed to import the scene I was working on in Photoshop to flash, but I can't seem to figure how to get the animated smart object (with a screen layer blending mode) to come across in flash. I'm sure there is some super simple way of doing this, but I can't think of one. I've got years of experience with Photoshop, but little time with Flash.
When I import the PSD file to Flash I am selecting the animated smart object layer as "Bitmap image with editable layer styles" selected, and have it also selected to be a movie clip. But it only shows up as a static layer without the screen blending like it was in Photoshop. What am I doing wrong here?
Thanks,
Paul

Paul you may want to ask this question over in the AI forum http://forums.adobe.com/community/illustrator its audience may have more experience then this forum's audience with Illustrator and Photoshop combo many here only use Photoshop. I for example have no idea what you mean when you write a spot color.

Similar Messages

Photoshop CC smart objects open in Illustrator CS6 instead of Illustrator CC

Photoshop CC smart objects open in Illustrator CS6 instead of Illustrator CC ? what to do
http://www.celebweightlos.com

What is the file association for ai in your OS?

I have an Adobe Indesign to Photoshop question - Smart Objects

I have an Adobe Indesign to Photoshop question - Smart Objects
I am copying and placing InDesign photo silhouettes and placing them into a Photoshop document for an online graphic.
I believe that the color holds up very well. It's when the JPG goes through a CMS ingest that the colors warp. A photo technician is able to correct the color.
I just need to get some insight on my process that (I think) I invented - since I don't see any discussions or videos online that back me up.
Any thoughts - or who could I access that might have an answer for me.
Thanks!

You haven't invented anything. Your server-side processing (based on something involving ImageMagik with PHP most likely) is simply stripping/ ignoring color profiles and converting the colors. This is very much the same issue as in your other post - your procedures just don't realyl make sense and you're basicalyl screwing yourself by using this methodology.
Mylenium

Photoshop CS4 smart object template just overwrote a raw file - HELP

So. I've been working in Photoshop extensively for about 6 years now and I am well aware that nothing we do in Photoshop or Lightroom is supposed to overwrite a raw file. I'm not talking about changing it to something a little lighter or darker, I'm talking about replacing a picture of one baseball player with another one - and the original? Gone.
Here's what happened: I have a poster template that contains several layers, 7 of which are smart objects. I change the pictures in the template by right-clicking the smart object layer and selecting "replace smart object," browsing to the new image, selecting, and here is what SHOULD happen: the target picture opens in Adobe camera raw, I make some small edits, click done or okay or something similar, and that new image has replaced the old one in the template. What DID happen was this: I followed the procedure above and selected my target raw file, the picture that was already in the template (the one I was trying to replace with my target file) opened in Adobe camera raw. I thought - Hey, that's wierd! Closed the ACR dialog and tried again. Same thing happened. I opened lightroom and saw - to my HORROR - that the target file had been changed to the same image that was in the template.
If it clarifies: pictures of player A (who played in 2009) is in all of the smart object layers in my template. I want to make that poster be of player B (who played in 2012) so I begin replacing all the smart objects. When I get to the 3rd image in the poster template, Photoshop overwrites my raw file of player B with the smart object photo of Player A. There were no photos of player A on the network drive that the picture of Player B was on. But there's one now. My raw file shows that it was modified about 10 minutes ago.
We tried undoing in Photoshop. That did nothing. We tried deleting the xmp file. That did nothing. We removed it from the lightroom catalog and reimported it. It is now a picture of Player A from 2009 and my picture of Player B from 2012 is just gone.
Anybody have any idea what this could be and how we could avoid it in the future?
Best,
Jamey

mojoimagery wrote:
Now - JJ - when you say "overlay files" - what do you mean? Because that feels like a good description for what happened.
We performed no save operation at any point during the sequence of events that ended with the image in one raw file being replaced by the image in the smart object.
As I wrote Smart Object layers embedded object is a copy of the original and if you replace it you replace it with a copy of some other object. Embedded object are copies and independent from the original. If after creating a smart Object layer who's embedded object is a copy of a raw file and its conversion settings. You change the original RAW files RAW conversion settings the smart object layer raw conversion setting are not changes for its a copy with independent raw conversion settings. When you replace a smart object layers contents you will replace the embedded object and you should replace it with an object the has the same pixel size and orientation. Because there is an associated transform for the object in the layer that is not replaced. The replacement is also a copy. If the original smart object was created using File Open where you choose a RAW file ACR would open with the RAW files current conversion settings. In ACR you can changes the setting then hold down the shift key to change the open image button to an Open Object button. Using that button ACR will open a smart object layer in Photoshop the contents of the embedded object is a copy of the RAW file and the current ACR settings. No File is written Photoshop is not a File Editor its a Document editor that has many data structures for different layer types. When you replace the contents of a smart object you will be put into a "Place" file selection dialog if you choose a raw file it should have the same orientation as the image being replaced because of the associated transform. When you choose a RAW file ACR will open and you can change the conversion settings however there will be no Open Image button instead there will be an OK button. There is also a save image button and you can save a RAW file that is a DNG file not a CR2 file. Like the DNG converter. If you click the OK button the embedded object in the smart object layer will be replaced with a copy of the selected RAW file and the current ACR settings. Again there is no file written Photoshop is not a File editor just the embedded smart object data is replaced in Photoshop smart object layer's data structure.
I do not think the use of smart objects in you process caused what you are experiencing and because it only happens once an a while I feel its more likely caused by some human error made during the processing in those cases. I would look elsewhere for what causing the overlay. In the place file selection dialog it is possible to rename files perhaps even by accident. Programs like LR and Bridge can rename and copy files perhaps overlay other files.

Photoshop bug: Smart Objects overwriting other Smart Objects when edited and saved in Illustrator

Experiencing issues when working with a large number (over 200) vector smart objects brought into Photoshop CS4 from Illustrator.
Things seemed to be going along nicely; if I needed to edit a Smart Object, I could double-click it, it would open in Illustrator and then I could edit and save it. Return to Photoshop and the Smart Object is updated. Swell and dandy. The issue started happen when I hit a large quantity of either vector smart objects (remember, over 200) or the many layers and groups within Photoshop (must be over 500). When I would double-click, open, edit, and save the vector Smart Object, the Photoshop Smart Object I was working on would update AND another/several other Smart Objects would update as well. Which, of course, would ruin the artwork, as suddenly I was seeing several instances of the same object. If it hadn't have been for ForeverSave, I many not have recovered the work.
It's rather hard to isolate the issue to see what's causing the problem. Here are some of the possible causes:
Running Snow Leopard on Mac
Many, many Smart Objects in file, perhaps enough to ruin the naming convention and cause bugs when Photoshop referenced the temp file
Many, many Photoshop layers and groups
Illustrator vector files copy+pasted from several different files (affects the naming convention perhaps?)
Some groups/layers in Photoshop are duplicates
To help make it a little clearer, you should know:
Running the most updated software / OS (that is until CS5 comes out)
Smart Objects showed no error until I had actually opened, edited, and saved the referenced temp file (i.e. VectorSmartObject1.ai)
Files saved and worked on from Dropbox (network folder)
Not looking for much of an answer to this question; I just wanted to see if anyone else had come across this bug. Also, Adobe PLEASE look into this as you begin testing for the next update. I have the file(s) if you need to replicate the issue. My best guess is that the naming convention of Vector Smart Objects has an odd character limit so when Vector Smart Object 200.ai is saved, Vector Smart Object 2.ai gets overwritten.

Have you tested this with Photoshop CS5 and Illustrator CS5? (the current versions, that came out last month)
If you duplicated a smart object layer, both layers refer back to the same file content. So when you change the file, both layers would be updated. That is intentional and explained in your manual. If you didn't realize this, that could explain what you are seeing.
If you placed separate files, then they should not be updated at the same time, because they will refer to separate files.
Yes, Smart Objects only update when you save the file.
You would need over 4 billion smart objects in one document to get Photoshop confused about which one refers to which file. And since the layer limit is much less than 4 billion, I doubt that is the cause.
There is no naming convention involved. We don't limit the filenames (except to platform standards and to include a file type extension).

Copy in illustrator, paste in photoshop as smart object problem

Hello. I am posting this here hoping that this message might be seen by someone more experienced who knows the answer. I have already tried to find a solution on my own, but to no avail, and I already lost a whole day just with this problem.
I'm trying to build an example website, in anticipation for a real one that I want to build later on. I've done the wireframing and design (some of it) in illustrator, and now I want to copy to photoshop what I did in illustrator. I need to copy it as a smart object. The problem is that when I copy to photoshop, even though I choose the same dimensions, the file is not the same size. I have inserted some images to try to explain this more clear.
These are some settings in illustrator.
These are the dimensions in illustrator.
I select the whole content from illustrator, copy it
And after that I go to photoshop. I choose to create a new file
Even though when I created a new file in photoshop I selected the same dimensions that were in illustrator (960 px 1810px), the copied object does not match the canvas when I press enter.
I've searched online for people that had the same problem and I found something somewhat similar, but not helpful. The problem for them was that the anti-alias was not selected. However, as can be seen in the images, in my case the anti-alias is selected. The difference I noticed is that for them the W and H are both directly 100% when the object is pasted into photoshop, but for me this never happens, it is always something different. In the images here it is w 99.99% H 99.94%, and I created another layout before this that had even worse dimensions, something like W 97.68% H 98%. I tried to fix this by putting manually 100% for each before I press enter, I even selected the "maintain aspect ration" icon (situated between W and H) but after that the image gets distorted.
I should also mention that I created different other smart objects with these files and they have the same problem - I selected the header for example, made it a smart object, and every time they are introduced to photoshop they are not W 100% H 100% but are 9X % 9X% or something.
I also tried, when creating a new document in photoshop, to put instead of 72pixels/inch - 300pixels/inch and its the same problem..
I also looked at the illustrator file so that there are no strokes on the edges of the document.
So, please, if there is someone who know how to fix this, to paste it so that I will have the same dimensions (W 100% H 100% automatically) so that the documents will match how it is normal, I would really apreciate the help. If there are any other details and setting one might need, I will look for them and mention them after that. Thank you!

Use
file >> export > psd instead
Your resizing problem is coming from what is in your clipboard is not 960 x 1810, but larger (960.078 x 1810.048 as seen in your 3rd screenshot), and Photoshop is resizing trying to fit.
To fix this yourself, make a new document, your clipboard size will automaticallly be used if you make a new .psd doucment, then paste, than drag over to your 960 x 1810 .psd document and reposition.

Automating RAW file conversion to Photoshop with Smart Object Layer

Hi
Can anyone tell me if it is possible to automate an action (and the steps) to open a series of photos from their raw file state to a Photoshop file with a smart object layer. I have tried **** this... recording an action without success... it ends up creating a photoshop file with a background layer, no smart object layer.
Am i missing something obvious? Thanks for your help!
Regards bruce

Hi
Can anyone tell me if it is possible to automate an action (and the steps) to open a series of photos from their raw file state to a Photoshop file with a smart object layer. I have tried **** this... recording an action without success... it ends up creating a photoshop file with a background layer, no smart object layer.
Am i missing something obvious? Thanks for your help!
Regards bruce

Lightroom - Photoshop and Smart Objects

Hi there,
I've got a very general, work flow related question.
I want to open some of my Lightroom images as smart objects in photoshop to do certain changes.
The files are opened in PS as .tif and I add some layers etc.
If I now save the image, it gets re-imported in LR.
However, I seem to lose all the data like layers etc of photoshop, and I'm not sure how to prevent this.
If I close the image in photoshop, re-open the new LR image again in PS, the layers etc are gone.
What's the correct workflow to do this? (Open images from LR in PS to do adjustments, and save them back to LR)
Thanks a lot,
Christoph

When you re-open the tif file in Photoshop, choose Edit Original. What you're doing is opening with LR adjustments, causing it to create a new flattened tif.

Photoshop CS6 smart objects on Mac

I recently upgraded to CS6 Master on Mac Mountain, and noticed that smart objects in Photoshop don't open in their respective applications. For example, when I double-click on the smart object, they open in Preview instead of Illustrator. How do I prevent Preview from opening smart objects? How do I make smart objects open in the application in which they were created?

Chris,
Thank you for the prompt response. I have already checked my file types/extension associations. .EPS and .AI files are default set to open in Illustrator. PDFs are currently set to open in Preview, which I don't mind and I know I can change this to Acrobat if I need to.
Oddly enough, I forced ALL .EPS files to open in Illustrator (I got a prompt that asked if I wanted to change opening all EPS files from Illustrator CS6 to Illustrator CS6), and that seemed to have the desired effect.
Weird, but thanks for the help!

Pasting vectors from Fireworks to Photoshop as smart objects

I'm trying to copy a vector object from Fireworks CS5 to Photoshop CS5, I want to past it as a Smart Object.
I tried:
- Normal copy and paste to PS: gives me a bitmap in PS
- Copy as Vectors in FW > paste in PS gives me the paste option palette. When selecting Smart Object, I get an error:
"Could not place because the parser module cannot parse the file."
- Pasting the Fireworks vector object in Illustrator, then copying and pasting it in PS works fine, I can paste it as Smart Object.
This should be straighforward, and used to work in CS3...
Can anybody confirm this bug/problem?

Doesn't work for me either. You can report bugs here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Photoshop CS5 Smart objects, Pen tool, Layers.

Hi Ive got few questions about Photoshop CS5.
Every time I open new image in my project photoshop opens as Smart Object and I always have to Rasterize its really annoying. How to change it?
When im using Pen tool and making selection its selects now the part which I selecte but background so I always have to inverse selection to select the part I want to its never happens in Photoshop CS3
When im working on two different projects and I want to copy layer from one project to another how you do it?
Thanks for your help.

1. If your dragging or placing into the image, you can go to Edit>Preferences>General and uncheck Place or Drag Raster Images as Smart Objects.
2. When using the Pen Tool enable Add to Path Area before drawing the path. You can change it after drawing the path by using the Path selection Tool.
3. If your using tabs you can select the Move Tool and drag from the document area on the screen to the other tab and the other document should reveal itself.
Another way is to right click on the layer in the layers panel, choose Duplicate Layer and then in the dialog that follows choose the document under destination.

Opening DNG as a Smart Object into Photoshop CS5?

I am using a Windows 7 64 bit platform and CS5 64 bit. I have the most recent Camera Raw plug in for my Nikon D3100 camera. In Bridge you are supposed to be able to open a dng file in Camera Raw, make your corrections and then by holding the Shift key it should change the open file button to open it as a Smart Object. When I do that nothing opens in in Photoshop.
Any suggestions?
P

Jeff Schewe wrote:
pbfp wrote:
Can you tell me how to access the workflow settings?
Pretty simple (and the settings are sticky), open a raw image and in the center where the processing info is shown (lower center link) which acts both as an info readout AND a button to change the Workflow Options settings, click on this link...it'll give you a dlog to change the Workflow Settings.
Alter the settings and click Done (cancel doesn't work since it works as a Cancel).
Thereafter, unless you make changes, the Workflow Options should be sticky.
Thank you Jeff for the information.
Please let me know if you think the worflow settings are wrong: Here is how the workflow is currently set: Space: Adobe RGB 1998; Depth: 16bits/channel; Size 34072 x 4608 (14.2 MP); Resolution: 260 p/in.; Sharpen: None; Amount: none; The bix is checked to open in Photoshop as a Smart Object.
Now here is the thing. If I am in Bridge and double click on a dng file or right click on a selection of files and choose Open in Photoshop, it opens a Camera Raw window for the file/s and then if I click on the open objects button, it does open them in Photoshop as smart objects. The problem is that if I select, from the Bridge pop=up menu to open the selected file/s in Camera Raw, it is then that they do not get sent to Photoshop as smart objects. Nothing happens, they just don't open in Photoshop.
I am also having a very hard time sending dng files from Lightroom into Photoshop. So clearly there is something not "connected" properly. Or maybe it is not clearly, but I am supposing that there might be some general issue. Any thoughts would be greatly appreciated.
P

Import into photoshop as layered smart objects

is there a way to import images into mulitiple images into photoshop as smart objects from bridge?
Thanks

I tried to using the ACR export setting: 'open as Smart Objects in PS' and
hit done, revert to Bridge and with Tools - load to layers.
It seemed the obvious route for me but it did not work sadly enough.
However using the load to layers tools gives you the option to select the
layers in the file and then convert to smart objects, only you have to do it
one by one I'm afraid.
is there a way to import images into mulitiple images into photoshop as smart
objects from bridge?
Thanks

AP2-Photoshop CS3 - Open as "Smart Object"

Good evening,
Users of Adobe Photoshop CS3 will know that there is a possibility in Adobe Camera Raw to open a RAW file as "Smart Object" (by holding down the shift key). This way one can easily copy the Smart Object, go back to Camera Raw, tweak the settings, and blend the two objects together.
I am wondering whether anyone has found a solution in Aperture 2 to open an image in Photoshop as smart object...
Thanks,
Philipp

you can't open a file from aperture as smart object in photoshop. but as you can assign your own shortcuts to all menu commands and functions in photoshop, why not create a shortcut to convert any image layer into a smart object? (photoshop menu: layers - smart object - convert to smart object). this way, it only takes you a press of a key, and you have your smart object.
having said this, keep in mind, there is of course quite a different to raw files opened as smart objects through camera raw: if done with cr, the smart object lets you change the raw conversion again. aperture however renders a psd or tiff before sending it to photoshop. so even if you convert this to a smart object, you will not have access to the original raw file.

Photoshop document with smart objects changed when I apply color profile. Why?

I work in Photoshop with smart objects. When I apply color profile smart object are changed. For example change filter or change size. I dont now why?
See image

Yes, fortunately, I am a Windows user, but I don't want to start a religious war here And it is also possible to run multiple versions of Adobe products simultaneously under Windows - why shouldn't that be possible? Currently I have CS3 and CS4 and somtimes use CS3 when CS4 is just too buggy to get the job done. Before that I had CS and CS2 on the same machine.
But I wouldn't keep all versions back to PS 6.0 or CS, that would be a bit too chaotic and I'd had to spend days of installing if I get a new computer. I expect those programs to be a little bit backwards-compatible, so I don't have to use many different versions. And for Photoshop, this is mostly the case. It's just very tiny details like Smart Object resizing that seems to work differently.
Otherwise I'm really happy that in CS4 I can finally link Masks to smart objects and apply warp and perspective on them, that's a big plus!

Photoshop animated smart object to Flash??

Similar Messages

Maybe you are looking for