Photoshop causing banding on prints - CS5, Epson r2000

Hi there, now I know that banding isn't a new topic, but it seems that the banding I'm generating in my prints is being caused by photoshop in some way. Last week I purchased a new Epson r2000 printer and have never successfully printed anything from it without bands every inch or so. Thinking it was a hardware error I contacted Epson, who checked the printer using another piece of software, iphoto, to print, and it came out fine. They unfortunately couldnt help me out from there, other than ruling out a printer error. Can somebody help me? I'm running Snow Leopard, CS5, and there's no reason for this incompatibility to be occurring.
Many thanks
Richard

It does have a gloss enhancer (I think that's what it's called.)
The first time I printed the test I noticed that the whole white area of the test paper was a bit soggy. So I figured it was coating it with the gloss enhancer.
I printed again with it turned off but the test picture looks exactly the same.

Similar Messages

  • Elements 11 will not print with Epson R2000?

    Cannot make Elements 11 work with new Epson r2000 printer.  Prompt on screen states it is not compatible or settings are not correct.  Epson tech support worked on it, said to contact without success, said to contact Adobe.  Printer works fine on all other applications.  Help please.

    Thanks again.
    Richard
    Date: Thu, 12 Sep 2013 08:49:39 -0700
    From: [email protected]
    To: [email protected]
    Subject: Elements 11 will not print with Epson R2000?
        Re: Elements 11 will not print with Epson R2000?
        created by A.T. Romano in Premiere Elements - View the full discussion
    Ollie37
    Thanks for the follow up.
    Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
    Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
    ATR
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop  After restart error message appears:  - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

    PROBLEM: Cannot print from Photoshop
    After restart error message appears:
    — “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
    • All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
    The printer printed fine until about 2 weeks ago when this error message appeared.  Printing continues from Pages, I-photo, preview etc. —  only Photoshop fails.
    The printer has been turned on and off, as have open documents been closed and open etc..   Preferences reset.  Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
    Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
    Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
    Attempting unsuccessfully to print to Epson 3880
    What Adobe support will be of help.
    Robert Darling —  2/19, 20, 21,22,23/2015

    Probably best to ask in Photoshop General Discussion
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Photoshop elements 10 not printing to Epson Stylus 9800

    I am running photoshop elements 10 on a windows 8 computer and trying to print to my Epson Stylus 9800 and everything is coming out almost black. I can print color graphics from the web perfectly but no luck with elements. Does anyone have any ideas about what I can do to fix it?

    Did it ever work properly?
    Do you have the latest drivers for the printer?
    Try to print a test page from the printer itself to check that all colors show up.

  • Elements 11 will not work with Epson r2000 printer

    Cannot make Elements 11 work with new Epson r2000 printer, works with all other applications.  Epson tech support could not fix, said problems was with Elements 11.  After making all settings including having Phtoshop manage color and turning off color management in printer, receive Photoshop prompt stating "printer is not compatible or printer settings are not correct.  Need help, thank you.

    Thanks again.
    Richard
    Date: Thu, 12 Sep 2013 08:49:39 -0700
    From: [email protected]
    To: [email protected]
    Subject: Elements 11 will not print with Epson R2000?
        Re: Elements 11 will not print with Epson R2000?
        created by A.T. Romano in Premiere Elements - View the full discussion
    Ollie37
    Thanks for the follow up.
    Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
    Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
    ATR
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Photoshop CS5 crashes when I try to print to Epson R2880, anyone resolved this yet?

    Photoshop CS5 crashes when I try to print to Epson R2880.  Does anyone know how to resolve this?
    Thanks

    I have managed to get the printer to work without Photoshop crashing, not sure exactly what I did.  I checked for any Adobe updates which there were, so I uploaded those and then was able to print.
    Thanks for replying!

  • Problem printing with Epson 3800 and Photoshop CS5

    I came across a problem trying to print with my Epson 3800 in Photoshop CS5.  I recently upgraded to Photoshop CS 5 (and Lightroom 3).  I tried to print using my Epson 3800 with CS5 but could not adjust Print Settings, Color Mamagement, Paper Configuration, Expand Border because those options are unavailable and there is a line crossing through them. I get a message that says "The bundle 'Print Setting' could not be loaded because it does not contain a version for the current architecture".   It then says to contact the creator listed here for the latest version: PrintSetting version 3.57, Copyright SEIKO EPSON CRP 2001-2006.   I can print through Photoshop CS4 as usual, but CS5 is a problem.  I haven't tried printing though Lightroom 3 yet, and have not typically used Lightroom to print, but I wonder if that will be a problem too?
    Any help will be appreciated.

    If you run CS5 or LR as a 32bit application you will have all these option available to you. You can then save these options as presets that can then be applied when you are running the applications in 64bit mode even if you can not access them individually.
    Also you might want to check Epson's download site especially the European site to see if there are newer drivers or updates for your printer. The newest drivers for other printers like the 7600/9600 support application running in 64bit mode.
    Doyle

  • I have a iMac and i just updated the computer to Yosemite.  I have Photoshop CS5 and when I try to print under print size --- manage custom size , photoshop unexpectedly quits every time.  I updated the printer drivers (epson 9880)  uninstalled and instal

    I have a iMac and i just updated the computer to Yosemite.  I have Photoshop CS5 and when I try to print under print size --- manage custom size , photoshop unexpectedly quits every time.  I updated the printer drivers (epson 9880)  uninstalled and installed all the drivers. restarted computer and it is still doing the same thing.  Cant find any costumer service here either except forums.

    I have exactly the same problem - Whenever I go to Print, the print widow appears, it thinks about it for a bit (rotating symbol) and then quits.
    This is the beginning of the problem details, cut and paste. It goes on much longer than this:
    Process:               Adobe Photoshop CS5 [786]
    Path:                  /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/MacOS/Adobe Photoshop CS5
    Identifier:            com.adobe.Photoshop
    Version:               12.0 (12.0x20100407.r.1103] [12.0)
    Code Type:             X86-64 (Native)
    Parent Process:        ??? [1]
    Responsible:           Adobe Photoshop CS5 [786]
    User ID:               502
    Date/Time:             2015-02-01 10:56:19.422 +0000
    OS Version:            Mac OS X 10.10.2 (14C109)
    Report Version:        11
    Anonymous UUID:        C0191A3D-714A-8117-8061-9291955759D1
    Sleep/Wake UUID:       B201F1B6-486D-4D70-B99A-E4F89B024BBF
    Time Awake Since Boot: 5600 seconds
    Time Since Wake:       240 seconds
    Crashed Thread:        0  Dispatch queue: com.apple.main-thread
    Exception Type:        EXC_BAD_ACCESS (SIGBUS)
    Exception Codes:       KERN_PROTECTION_FAILURE at 0x00007fff789d1e70
    VM Regions Near 0x7fff789d1e70:
        __DATA                 00007fff78986000-00007fff7898b000 [   20K] rw-/rwx SM=COW  /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Ve rsions/A/libLAPACK.dylib
    --> __DATA                 00007fff7898b000-00007fff789e1000 [  344K] rw-/rwx SM=COW  /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
        __DATA                 00007fff789e1000-00007fff789e6000 [   20K] rw-/rwx SM=COW  /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   ???                           0x00007fff789d1e70 OBJC_CLASS_$_NSMutableArray + 0
    1   com.apple.print.framework.PrintCore 0x00007fff95693021 PMRelease + 43
    2   com.adobe.Photoshop           0x0000000100c237cf AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 9727123
    3   com.adobe.Photoshop           0x0000000100c23e7d AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 9728833
    4   com.adobe.Photoshop           0x0000000100c23eb7 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 9728891
    5   com.adobe.Photoshop           0x0000000100c23da5 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 9728617
    6   com.adobe.Photoshop           0x0000000100aee053 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 8459543
    7   com.adobe.Photoshop           0x0000000100768c64 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 4768040
    8   com.adobe.Photoshop           0x0000000100af067e AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 8469314
    9   com.adobe.Photoshop           0x0000000100af0be9 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 8470701
    10  com.adobe.Photoshop           0x0000000100af1295 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 8472409
    11  com.adobe.Photoshop           0x000000010007bbdc 0x100000000 + 506844
    12  com.adobe.Photoshop           0x00000001000d6a7e 0x100000000 + 879230
    13  com.adobe.Photoshop           0x00000001000d6a9e 0x100000000 + 879262
    14  com.adobe.Photoshop           0x0000000100066eb1 0x100000000 + 421553
    15  com.adobe.Photoshop           0x0000000100071d74 0x100000000 + 466292
    16  com.adobe.Photoshop           0x000000010006716f 0x100000000 + 422255
    17  com.adobe.Photoshop           0x0000000100067232 0x100000000 + 422450
    18  com.adobe.Photoshop           0x00000001012f0007 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 16856267
    19  com.apple.AppKit               0x00007fff8d77c608 -[NSApplication run] + 711
    20  com.adobe.Photoshop           0x00000001012ee19c AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 16848480
    21  com.adobe.Photoshop           0x00000001012ef3c7 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 16853131
    22  com.adobe.Photoshop           0x0000000100068e82 0x100000000 + 429698
    23  com.adobe.Photoshop           0x0000000100238308 0x100000000 + 2327304
    24  com.adobe.Photoshop           0x00000001002383a7 0x100000000 + 2327463

  • Printing on epson cold press bright paper with Epson 2200 in Photoshop CS5

    The printer is old. Epson chooses neither to support it, nor does it seem to have anyone in their tech support knowledgeable about paper profiles. The paper is the whitest of white, and a bit thicker and stiffer than any of the usual watercolor papers i have been using for years by the likes of Hannemuele and Arches.  The profile that came with this paper is actually made for an Epson 3880 printer, I suspect because the 2200 is no longer supported by Epson.
    Usually with any new unsupported paper, I'll experiment within the photoshop print and profile settings, and eventually jerryrig something that looks decent. However, this particular paper is quite expensive, so before I waste a bunch of it, I thought maybe someone on this forum could offer some advise. I have tried printing with it only once so far, using the Apple (1998) profile with Photoshop in charge of printing. The result was that it "almost" works, except the red or oranges won't print at all, and instead, they both print as yellow. I also noticed that the paper ran through the printer much too quickly, as if it wasn't printing all of it.
    Immediately after this test, I ran my usual watercolor paper through the printer with the same settings. it printed true, AND, significantly, it took 3 times as long to get the paper all the way through the printer.
    Can someone here offer me any guidance? My own next (blind) choice would be to try the Epson 3880 profile that's made for this 13X19 inch paper, and also let the printer control the colors. But what about all the other settings? blackpoint? colormetric? all that stuff. Any help is much appreciated.
    One other thing. Even with this throw-away test print, i can tell that the EWpson cold press bright is something special. Both the detail and the color (those colors that were true) were very deep indeed.

    Well, my Epson 2200 may be old but it normally does a fantastic job on any paper I throw at it—provided the target profile is accurate and tailored for your particular unit.
    It's not clear to me who supplied the target profile you are using to print on that Epson Cold Press Bright Paper, but I'm unaware of of Epson ever having offered a target profile specifiocally for using that paper on the 2200.
    Frankly, I never even attempt to use any given photographic paper on my 2200 for which I don't have a custom profile for that specific combination of paper, ink and exact printer model.
    My advise is to have a professionally generated profile made by one of the several excellent commercial profiling services that send you one or more target images to print on your printer and then you sent them your prints for them to generate the specific profile by using the best available  colorimeter.
    Using a profile made for a different printer model borders on the absurd, in my opinion.  The least I would accept is a standard profile made by the paper manufacturer on a range of units of that specific printer model, and I would still not be as comfortable as with a specific profile derived from target-image prints made for my particular 2200 unit.
    The prices for this service vary widely from one service outfit to another one, and some are very reasonable (try Inkjetart<===click*  for the $25 price range, for instance).  In most instances, it can be considerably cheaper than the amount of wasted ink and paper from repeated and futile trial-and-error attempts to get an optimal print from your 2200.
    * I have no connection to Inkjetart whatsoever,

  • Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?

    Seeking help with PS Elements 11 which does not work with Epson r2000 printer.  Epson tech support could not fix, said it is PS e11 problem.  Receive prompt on PS e11 screen when I try to print stating "not compatible or settings are not correct.  Have set PS to manage color and printer manages color to off.  Would appreciate any suggestions.  Thank you.

    Hi,
    Sincerely appreciate your help.  Running Windows 7 on a  Dell XPS420.  System has been very stable for years.  Before purchasing the Epson r2000, I owned an r1800 which was an excellent printer but after seven years started to exhibit paper feed problems.  The r1800 worked with all applications and I was well satisfied with the saturation, contrast, etc. printing mostly 8x10 and 11x17 prints. 
    Thank you for the information about the # of installs for PS E11, will try uninstall/reinstall this morning.
    Will let you know how things go.
    Richard
    Date: Thu, 12 Sep 2013 19:47:38 -0700
    From: [email protected]
    To: [email protected]
    Subject: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
        Re: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
        created by Barbara B. in Photoshop Elements - View the full discussion
    What operating system are you using?
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5678022#5678022
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5678022#5678022
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5678022#5678022. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Printing problem: epson R2880 , CS5 + 6, OS Mountain Lion

    Hi There,
    First of all apologies if this is in the wrong thread, If so, could an admin please move it to a correct one?
    I have searched google and these forums for an asnwer but am still having the same problem.
    Since upgrading to Mountain Lion (from Snow leopard) my prints are not coming out well at all, it's mostly the reds which ae not vibrant at all, and coming out very orange.
    I have tried numurous variations of settings:
    photoshops manages colors, printer manages colors, relative,perceptual, made sure printer maanages colors is off, different paper types etc.
    *I took screen shots of every setting to match to the prints so can post if neccesarry
    I have also tried printing from Preview and LR 4, still having the same problem.
    I even tried printing on a different machine with Snow Leopard installed (but was foreced to update to the latest Epson driver (9.0.2).
    Does anyone have any idea where the problem could be?
    I've been trying to print my portfolio for an important meeting and this has taken up about a full day of trial/error tests.
    OS: Mountain Lion
    Printer: epson R2880 (Px 5600 in Japan) Driver (9.0.2)
    Paper: epson Photo crispia / Superfine Matte (making sure to switch out the matte blak and photo black cartridges eveytime)
    SW: CS5, CS6, LR 4
    Thanks in advance,
    Jake

    Apologies for the legth of this post but it needs it.
    For 3 years I have struggled to get a B&W print without a magenta colour cast.
    My old printer, an Epson 1400, only had 1 black so I thought this was to blame and bought a new Epson R2880 with 3 blacks earlier this year..
    My setup is
    CS5
    Fotospeed paper
    Fotospeed Crystal dye inks
    Profiles for each paper.
    A calibrated screen
    Windows 7
    All drivers etc are up to date.
    Because it was originally loaded with Epson inks, I used the Advanced B&W (ABW) setting to print B&W photos, which were actually very good considering I wasn't using Epson paper. When the Epson ink ran out, I changed to Fotospeed Crystal dye inks with profiles.
    I have successfully printed colour photos with the new setup for a couple of months.
    Yesterday I had a batch of photos to print so I set the system up to Photoshop Manages Colour etc (PMC). ( I know what I am doing here)
    The first, a colour print, printed OK.
    Because the second was a B&W, I did a test print using ABW and then a test print using PMC. The ABW had a magenta colour cast, the PMC printed B&W so I printed actual size with PMC and it worked great.
    The third photo, another B&W, I again used PMC and did a small test print - it printed magenta. This was only minutes after printing photo 2.
    I did the usual messing around with perceptual and relative col. and quality and max. quality setting, PSD v Tiff etc. and everything came out magenta.
    Shutdown PC and went to bed. Printer remained switched on to save on ink cleaning routines.
    Today.
    Booted up PC.
    Did a small test print using PMC and it came out B&W - no colour cast. ??????
    Printed full size and it came out B&W no colour cast. On checking the print I noticed some blown highlights so went back into CS5 and did some adjustments to recover the highlights.
    Tried a small test print with PMC and it printed magenta. Again, only minutes between the two prints and it goes from B&W to magenta.
    Closed everything down and did a PC restart. Tried again with PMC and still magenta.
    Several magenta attempts later and I nearly gave up the will to live.
    Had a brainwave - I have Canon Digital Photo Professional on my machine as I use Canon cameras so I tried to directly print from the Canon software.
    If this printed B&W then it would indicate a problem between CS5 and Epson. If it didn't work then it would absolve CS5
    The software allows you to select paper profiles etc in a similar way to CS5 and I also set up the Epson software as no colour adjustment (just like when you use CS5)
    Tried a test print and it printed B&W.
    Went straight away into CS5 and printed the same test photo using PMC and it printed magenta.
    Went straight back to the Canon software and printed a full size print and it printed B&W.
    Can someone from Adobe please explain why
    CS5 and the Canon software must be using the same print driver yet one of them is successful and the other isn't?
    Why, when using CS5 to manage colours, two prints, two minutes apart can change from B&W to magenta?
    It suggests to me that the CS5 software is not handling the Epson driver correctly (or vice versa) and double profiling is occuring. In any event users of these products should rightly expect one of you to pick up the ball and run with it and not just blame each other.
    So my third question is - will Adobe run with the ball?

  • Printing to Epson R2400 - Lightroom 1.3 vs Photoshop CS2

    I'm printing a fair amount of B&W images in Lightroom using Velvet Fine Art paper and Advanced B&W Management in the Epson printer driver. As instructed by Epson, the printer setting in Lightroom is "Managed by Printer", which should be correct, right, except that my printed images are coming out a little darker than my calibrated monitor suggests they should be.
    Epson technical support said that some users are having difficulty printing from Lightroom to the R2400, and suggested that I try printing from Photoshop instead. So, using the same settings in Photoshop, and reprinting the image, I did notice a difference.
    I'm wondering, are there any printing issues between Lightroom 1.3 and the Epson R2400 at this point in time. If not, why would the same image come out differently in Photoshop if the same printer settings are being used?

    Robert-
    The Search functions a bit oddly- it will default to searching the thread you're in if you go there from a thread. If you go to main page, it'll search all threads.
    http://www.adobeforums.com/webx/.3c0557ae/19 - is one such thread, Suggest you also search on Schewe.

  • Elements 10, windows 8, 64 bit, epson artisan 835 printer: prints are really dark even after using enhancements like adjusting lighting. Prints are darker than photoshop edit screen. Prints are acceptable using paint, windows photo viewer, or gallery.

    Elements 10, Windows 8, 64 bit, Epson Artisan 835 printer: Prints are really dark even after applying enhancements, like adjusting lighting. Prints are darker than Photoshop Edit Screen. Prints are acceptable using Paint, Windows Photoviewer, or Photo Gallery.

    In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
    That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
    Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
    Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
    While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
    Hunt

  • Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened an

    Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."  Even after closing and reopening the program, the print command is greyed out so I cannot select any printer. This also happens with a Brother laser printer. Both printers will produce a test page out side of the Adobe product. Help!

    I cannot get any help either.  I get the message "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."  I have reinstalled all drivers, powered off/on all printers (2 of them - a Brother HL - 4040cn and an Epson Stylus Pro 7890 - which all worked fine until this morning).  There appears to be no path to a solution.  I have read all the forums and tried about 20 different suggestions all to no avail.  Reboots, changing cables, reinstalling printers and drivers and Photoshop CS6 - ALL TO NO AVAIL.  On a macbook pro retina with 10.10.3.  This issue is out there and some get solutions - but not all - that's my crowd...the not all crowd.  I have yet to be able to print from CS6 any more.  This is a show stopper and my patience is wearing thin.  And I'm tired of stupid questions like "is your printer powered on?" give me a break.  This appears to be an adobe photoshop cs6 problem - as I can print from every other application.  Anyone have any ideas?  Adobe should have something?... Adobe system  info below:
    Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
    Operating System: Mac OS 10.10.3
    System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 2300 MHz
    Built-in memory: 8192 MB
    Free memory: 4665 MB
    Memory available to Photoshop: 7059 MB
    Memory used by Photoshop: 70 %
    Image tile size: 1024K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
    OpenCL Version:
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
    Display: 2
    Display Depth:= 32
    Display Bounds:=  top: 1072, left: 140, bottom: 1950, right: 1580
    Video Renderer ID: 16918311
    Video Card Memory: 1024 MB
    Video Rect Texture Size: 16384
    OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
    OpenCL Version: 1.2 (Feb 27 2015 01:29:10)
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
    Display: 1
    Main Display
    Display Depth:= 32
    Display Bounds:=  top: 0, left: 0, bottom: 1050, right: 1680
    Video Renderer ID: 16918311
    Video Card Memory: 1024 MB
    Video Rect Texture Size: 16384
    Serial number: 92629107631240972642
    Application folder: KerrysHD:Applications:Adobe Photoshop CS6:
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      KerrysHD, 232.6G, 19.7G free
    Required Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
    Primary Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Plug-ins:
    Additional Plug-ins folder: not set
    Installed components:
       adbeape.framework   adbeape   3.3.8.19346   66.1025012
       AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
       adobe_caps.framework   adobe_caps   6.0.29.0   1.276181
       AdobeACE.framework   AdobeACE   2.19.18.19243   66.492997
       AdobeAGM.framework   AdobeAGM   4.26.17.19243   66.492997
       AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
       AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
       AdobeBIB.framework   AdobeBIB   1.2.02.19243   66.492997
       AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.492997
       AdobeCoolType.framework   AdobeCoolType   5.10.31.19243   66.492997
       AdobeCrashReporter.framework.framework   AdobeCrashReporter   6.0.20120201  
       AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
       AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
       AdobeLinguistic.framework      17206  
       AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
       AdobeOwl.framework   AdobeOwl   4.0.93   66.496052
       AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
       AdobePDFSettings.framework   AdobePDFSettings   1.4  
       AdobePIP.framework   AdobePIP   6.0.0.1654  
       AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
       AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
       AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
       AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
       AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
       ahclient.framework   ahclient   1.7.0.56  
       aif_core.framework   AdobeAIF   3.0.00   62.490293
       aif_ocl.framework   AdobeAIF   3.0.00   62.490293
       aif_ogl.framework   AdobeAIF   3.0.00   62.490293
       AlignmentLib.framework   xcode   1.0.0.1  
       amtlib.framework   amtlib   6.0.0.75  
       boost_date_time.framework   boost_date_time   6.0.0.0  
       boost_signals.framework   boost_signals   6.0.0.0  
       boost_system.framework   boost_system   6.0.0.0  
       boost_threads.framework   boost_threads   6.0.0.0  
       Cg.framework   NVIDIA Cg     
       CIT.framework   CIT   2.0.5.19287   145486
       data_flow.framework   AdobeAIF   3.0.00   62.490293
       dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0  
       dvacore.framework   dvacore   6.0.0.0  
       dvamarshal.framework   dvamarshal   6.0.0.0  
       dvamediatypes.framework   dvamediatypes   6.0.0.0  
       dvaplayer.framework   dvaplayer   6.0.0.0  
       dvatransport.framework   dvatransport   6.0.0.0  
       dvaunittesting.framework   dvaunittesting   6.0.0.0  
       dynamiclink.framework   dynamiclink   6.0.0.0  
       FileInfo.framework   FileInfo   66.145433   66.145433
       filter_graph.framework   AdobeAIF   3.0.00   62.490293
       hydra_filters.framework   AdobeAIF   3.0.00   62.490293
       ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
       ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
       image_compiler.framework   AdobeAIF   3.0.00   62.490293
       image_flow.framework   AdobeAIF   3.0.00   62.490293
       image_runtime.framework   AdobeAIF   3.0.00   62.490293
       LogSession.framework   LogSession   2.1.2.1652  
       mediacoreif.framework   mediacoreif   6.0.0.0  
       PlugPlug.framework   PlugPlug   3.0.0.383  
       UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
       wrservices.framework        
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

  • Photoshop CS6 is not recognizing my Epson Photo 1400 printer...how to fix?

    I cannot print anything from Photoshop CS6. When i try to print any / all types of files from Photoshop CS6 to my Epson Photo 1400 printer, I get the following error message:
    "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."
    I can print all / anything (.pdf .tif.png, etc.) from ALL other applications-except from Photoshop.
    I only have one printer and it is recognized in my System Prefs.
    I have OS X 10.9.2 (13C64) and Photoshop 13.0 x64
    What to do....?
    Thank you in advance!!!

    Hi Chris,
    I have the current version of PS and the most current printer driver. I deleted the Adobe CS6 Prefs.psp file and relaunched PS. I actually got closer this time, it looked like i could print but then i got this error message: ColorSync color matching may produce different results than printer color management. Either Photoshop color management or printer color management is recommended. I clicked Ok , the print preview window no longer showed my document and when I went to hit the print button, the original error message came up again. I go to File / Print and Print is no disabled (grayed out).

Maybe you are looking for