Photoshop cc 2014 suddenly trouble with cloning and healing tool
I just updated photoshop cc 2014. I use a wacom tablet. Suddenly, when I use the healing brush or cloning brush. The brush control panel pops up and the tool simply doesn't work. After repeated attempts, I do succeed in getting this to work. Sure slows me down though.
Sorry for the lack of the report it was my first time reporting an error for software... Never had an issue before.
I haven't experienced the crash via text tool since I posted the question, but the Photoshop is still constantly crashing at startup, but every time I try to enter the report I get the error: Please try again later.m5
Similar Messages
-
When I use the cloning and healing tool it used to show a stamp indicating where it was replacing from. It suddenly stopped working. I can still remove spots but cannot move it around to see where I could use alternate space to clone or heal.
The source should show on both Heal and Clone. Hit the H key to turn them off and on or pick one of the options in the Toolbar.
-
Why is Photoshop CC 2014 nearly crash with Wacom and fix itself when I move my regular mouse?
I have Photoshop CC 2014 (completely updated through Creative Cloud). I am currently using a Wacom Intuos 3 9"X12" with the Intuos drivers all updated. Everything is updated. I am working on Windows 8, on a computer with 8 GB's of RAM. I have never had this problem before using Photoshop until just recently. Before I updated Photoshop CC 2014, I was having trouble putting in text into my files. I would go to edit or add text, and it would say that the text function was unavailable. I was pretty ticked, since I'm in school full time for animation and NEED Photoshop to work as fast as possible and this was making things harder. So, I updated. The text thing got fixed, but for some reason, whenever I use my wacom tablet to draw, it will work for a little bit (like two minutes) before it pretty much freezes my computer. It gets laggy and doesn't show anything on screen. I have waited almost two minutes before. But, whenever I move my REGULAR mouse (trackpad or USB mouse) it catches up with what just happened (including going from layer to layer if I clicked on those to get things moving). It makes it REALLY hard to work with this, and it's increased my worktime by at LEAST 45%, since I have to constantly fix this with a move of my regular mouse. During that time, I cannot click on anything with my wacom pen or use the hotkeys on the keyboard (the default ones).
It, so far, doesn't seem that Photoshop CC has it, but I cannot update to that version. I always get to 75% or something REALLY fast, and then it says there was an error. I just don't know what's going ON with my programs. Do I have to uninstall and reinstall or something? My computer is set to optimize weekly, and I've done multiple scans to make sure I don't have a virus or something. Everything in clean, and I'm not overloaded on stuff, either. I usually only have two or three programs total open, Photoshop CC 2014 included. It ends up either being Photoshop and Firefox or Photoshop, Firefox, and iTunes to listen to music. I use a second monitor, as well, to make my flow go faster.
Help ASAP would be VERY much appreciated! Thanks in advance!I have Photoshop CC 2014 (completely updated through Creative Cloud). I am currently using a Wacom Intuos 3 9"X12" with the Intuos drivers all updated. Everything is updated. I am working on Windows 8, on a computer with 8 GB's of RAM. I have never had this problem before using Photoshop until just recently. Before I updated Photoshop CC 2014, I was having trouble putting in text into my files. I would go to edit or add text, and it would say that the text function was unavailable. I was pretty ticked, since I'm in school full time for animation and NEED Photoshop to work as fast as possible and this was making things harder. So, I updated. The text thing got fixed, but for some reason, whenever I use my wacom tablet to draw, it will work for a little bit (like two minutes) before it pretty much freezes my computer. It gets laggy and doesn't show anything on screen. I have waited almost two minutes before. But, whenever I move my REGULAR mouse (trackpad or USB mouse) it catches up with what just happened (including going from layer to layer if I clicked on those to get things moving). It makes it REALLY hard to work with this, and it's increased my worktime by at LEAST 45%, since I have to constantly fix this with a move of my regular mouse. During that time, I cannot click on anything with my wacom pen or use the hotkeys on the keyboard (the default ones).
It, so far, doesn't seem that Photoshop CC has it, but I cannot update to that version. I always get to 75% or something REALLY fast, and then it says there was an error. I just don't know what's going ON with my programs. Do I have to uninstall and reinstall or something? My computer is set to optimize weekly, and I've done multiple scans to make sure I don't have a virus or something. Everything in clean, and I'm not overloaded on stuff, either. I usually only have two or three programs total open, Photoshop CC 2014 included. It ends up either being Photoshop and Firefox or Photoshop, Firefox, and iTunes to listen to music. I use a second monitor, as well, to make my flow go faster.
Help ASAP would be VERY much appreciated! Thanks in advance! -
After about 5 minutes of Photoshop CC 2014 running it crashes, i have tried running it as an administrator but still crashes.
Adobe Photoshop Version: 2014.0.0 20140508.r.58 2014/05/08:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: AMD CPU Family:15, Model:1, Stepping:0 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 4
Processor speed: 1497 MHz
Built-in memory: 3563 MB
Free memory: 800 MB
Memory available to Photoshop: 2928 MB
Memory used by Photoshop: 70 %
3D Multitone Printing: Disabled.
Touch Gestures: Disabled.
Windows 2x UI: Disabled.
Image tile size: 1028K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=512
glgpu[0].GLName="AMD Radeon HD 6520G"
glgpu[0].GLVendor="ATI Technologies Inc."
glgpu[0].GLVendorID=0
glgpu[0].GLDriverVersion="8.901.3.0"
glgpu[0].GLRectTextureSize=16384
glgpu[0].GLRenderer="AMD Radeon HD 6520G"
glgpu[0].GLRendererID=0
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atium d64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm6 4.dll"
glgpu[0].GLDriverDate="20111012000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.10"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[2147 483647]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[16384]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[16384]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[128]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[29]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
clgpu[0].CLPlatformVersion="1.1 AMD-APP-SDK-v2.5 (775.2)"
clgpu[1].CLPlatformVersion="1.1 AMD-APP-SDK-v2.5 (775.2)"
clgpu[0].CLDeviceVersion="1.1 AMD-APP-SDK-v2.5 (775.2)"
clgpu[1].CLDeviceVersion="1.1 AMD-APP-SDK-v2.5 (775.2)"
clgpu[0].CLMemoryMB=512
clgpu[1].CLMemoryMB=1024
clgpu[0].CLName="BeaverCreek"
clgpu[1].CLName="Caicos"
clgpu[0].CLVendor="Advanced Micro Devices, Inc."
clgpu[1].CLVendor="Advanced Micro Devices, Inc."
clgpu[0].CLVendorID=4098
clgpu[1].CLVendorID=4098
clgpu[0].CLDriverVersion="CAL 1.4.1589 (VM)"
clgpu[1].CLDriverVersion="CAL 1.4.1589 (VM)"
clgpu[0].CUDASupported=0
clgpu[1].CUDASupported=0
clgpu[0].CLBandwidth=1.64302e+010
clgpu[1].CLBandwidth=1.23947e+010
clgpu[0].CLCompute=23.7031
clgpu[1].CLCompute=23.4833
License Type: Subscription
Serial number: 96040086941066019767
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\Rob\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 445.8G, 83.4G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2014/04/14-23:42:44 79.554120 79.554120
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdbePM.dll PatchMatch 2014/04/23-10:46:55 79.554276 79.554276
AdobeLinguistic.dll Adobe Linguisitc Library 8.0.0
AdobeOwl.dll Adobe Owl 2014/03/05-14:49:37 5.0.33 79.552883
AdobePDFL.dll PDFL 2014/03/04-00:39:42 79.510482 79.510482
AdobePIP.dll Adobe Product Improvement Program 7.2.1.3399
AdobeXMP.dll Adobe XMP Core 2014/01/13-19:44:00 79.155772 79.155772
AdobeXMPFiles.dll Adobe XMP Files 2014/01/13-19:44:00 79.155772 79.155772
AdobeXMPScript.dll Adobe XMP Script 2014/01/13-19:44:00 79.155772 79.155772
adobe_caps.dll Adobe CAPS 8,0,0,7
AGM.dll AGM 2014/04/14-23:42:44 79.554120 79.554120
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
amtlib.dll AMTLib (64 Bit) 8.0.0.45 BuildVersion: 8.0; BuildDate: Fri Mar 28 2014 20:28:30) 1.000000
ARE.dll ARE 2014/04/14-23:42:44 79.554120 79.554120
AXE8SharedExpat.dll AXE8SharedExpat 2013/12/20-21:40:29 79.551013 79.551013
AXEDOMCore.dll AXEDOMCore 2013/12/20-21:40:29 79.551013 79.551013
Bib.dll BIB 2014/04/14-23:42:44 79.554120 79.554120
BIBUtils.dll BIBUtils 2014/04/14-23:42:44 79.554120 79.554120
boost_date_time.dll photoshopdva 8.0.0
boost_signals.dll photoshopdva 8.0.0
boost_system.dll photoshopdva 8.0.0
boost_threads.dll photoshopdva 8.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.2.6.32411 2.2.6.32411
CITThreading.dll Adobe CITThreading 2.2.6.32411 2.2.6.32411
CoolType.dll CoolType 2014/04/14-23:42:44 79.554120 79.554120
dvaaudiodevice.dll photoshopdva 8.0.0
dvacore.dll photoshopdva 8.0.0
dvamarshal.dll photoshopdva 8.0.0
dvamediatypes.dll photoshopdva 8.0.0
dvametadata.dll photoshopdva 8.0.0
dvametadataapi.dll photoshopdva 8.0.0
dvametadataui.dll photoshopdva 8.0.0
dvaplayer.dll photoshopdva 8.0.0
dvatransport.dll photoshopdva 8.0.0
dvaui.dll photoshopdva 8.0.0
dvaunittesting.dll photoshopdva 8.0.0
dynamiclink.dll photoshopdva 8.0.0
ExtendScript.dll ExtendScript 2014/01/21-23:58:55 79.551519 79.551519
icucnv40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
icudt40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
imslib.dll IMSLib DLL 7.0.0.145
JP2KLib.dll JP2KLib 2014/03/12-08:53:44 79.252744 79.252744
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OpenMP* Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 7.2.1.3399
mediacoreif.dll photoshopdva 8.0.0
MPS.dll MPS 2014/03/25-23:41:34 79.553444 79.553444
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC 2014 15.0
Plugin.dll Adobe Photoshop CC 2014 15.0
PlugPlugExternalObject.dll Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit) 5.0.0
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 5.0.0.74
PSArt.dll Adobe Photoshop CC 2014 15.0
PSViews.dll Adobe Photoshop CC 2014 15.0
SCCore.dll ScCore 2014/01/21-23:58:55 79.551519 79.551519
ScriptUIFlex.dll ScriptUIFlex 2014/01/20-22:42:05 79.550992 79.550992
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 7.0.1.102 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 7.0.1.102
VulcanControl.dll Vulcan Application Control Library 5.0.0.82
VulcanMessage5.dll Vulcan Message Library 5.0.0.82
WRServices.dll WRServices Fri Mar 07 2014 15:33:10 Build 0.20204 0.20204
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 15.0 (2014.0.0 x001)
Accented Edges 15.0
Adaptive Wide Angle 15.0
Angled Strokes 15.0
Average 15.0 (2014.0.0 x001)
Bas Relief 15.0
BMP 15.0
Camera Raw 8.5
Camera Raw Filter 8.5
Chalk & Charcoal 15.0
Charcoal 15.0
Chrome 15.0
Cineon 15.0 (2014.0.0 x001)
Clouds 15.0 (2014.0.0 x001)
Collada 15.0 (2014.0.0 x001)
Color Halftone 15.0
Colored Pencil 15.0
CompuServe GIF 15.0
Conté Crayon 15.0
Craquelure 15.0
Crop and Straighten Photos 15.0 (2014.0.0 x001)
Crop and Straighten Photos Filter 15.0
Crosshatch 15.0
Crystallize 15.0
Cutout 15.0
Dark Strokes 15.0
De-Interlace 15.0
Dicom 15.0
Difference Clouds 15.0 (2014.0.0 x001)
Diffuse Glow 15.0
Displace 15.0
Dry Brush 15.0
Eazel Acquire 15.0 (2014.0.0 x001)
Embed Watermark 4.0
Entropy 15.0 (2014.0.0 x001)
Export Color Lookup NO VERSION
Extrude 15.0
FastCore Routines 15.0 (2014.0.0 x001)
Fibers 15.0
Film Grain 15.0
Filter Gallery 15.0
Flash 3D 15.0 (2014.0.0 x001)
Fresco 15.0
Glass 15.0
Glowing Edges 15.0
Google Earth 4 15.0 (2014.0.0 x001)
Grain 15.0
Graphic Pen 15.0
Halftone Pattern 15.0
HDRMergeUI 15.0
IFF Format 15.0
Ink Outlines 15.0
JPEG 2000 15.0
Kurtosis 15.0 (2014.0.0 x001)
Lens Blur 15.0
Lens Correction 15.0
Lens Flare 15.0
Liquify 15.0
Matlab Operation 15.0 (2014.0.0 x001)
Maximum 15.0 (2014.0.0 x001)
Mean 15.0 (2014.0.0 x001)
Measurement Core 15.0 (2014.0.0 x001)
Median 15.0 (2014.0.0 x001)
Mezzotint 15.0
Minimum 15.0 (2014.0.0 x001)
MMXCore Routines 15.0 (2014.0.0 x001)
Mosaic Tiles 15.0
Multiprocessor Support 15.0 (2014.0.0 x001)
Neon Glow 15.0
Note Paper 15.0
NTSC Colors 15.0 (2014.0.0 x001)
Ocean Ripple 15.0
OpenEXR 15.0
Paint Daubs 15.0
Palette Knife 15.0
Patchwork 15.0
Paths to Illustrator 15.0
PCX 15.0 (2014.0.0 x001)
Photocopy 15.0
Photoshop 3D Engine 15.0 (2014.0.0 x001)
Photoshop Touch 14.0
Picture Package Filter 15.0 (2014.0.0 x001)
Pinch 15.0
Pixar 15.0 (2014.0.0 x001)
Plaster 15.0
Plastic Wrap 15.0
PNG 15.0
Pointillize 15.0
Polar Coordinates 15.0
Portable Bit Map 15.0 (2014.0.0 x001)
Poster Edges 15.0
Radial Blur 15.0
Radiance 15.0 (2014.0.0 x001)
Range 15.0 (2014.0.0 x001)
Read Watermark 4.0
Render Color Lookup Grid NO VERSION
Reticulation 15.0
Ripple 15.0
Rough Pastels 15.0
Save for Web 15.0
ScriptingSupport 15.0
Shake Reduction 15.0
Shear 15.0
Skewness 15.0 (2014.0.0 x001)
Smart Blur 15.0
Smudge Stick 15.0
Solarize 15.0 (2014.0.0 x001)
Spatter 15.0
Spherize 15.0
Sponge 15.0
Sprayed Strokes 15.0
Stained Glass 15.0
Stamp 15.0
Standard Deviation 15.0 (2014.0.0 x001)
STL 15.0 (2014.0.0 x001)
Sumi-e 15.0
Summation 15.0 (2014.0.0 x001)
Targa 15.0
Texturizer 15.0
Tiles 15.0
Torn Edges 15.0
Twirl 15.0
Underpainting 15.0
Vanishing Point 15.0
Variance 15.0 (2014.0.0 x001)
Water Paper 15.0
Watercolor 15.0
Wave 15.0
Wavefront|OBJ 15.0 (2014.0.0 x001)
WIA Support 15.0 (2014.0.0 x001)
Wind 15.0
Wireless Bitmap 15.0 (2014.0.0 x001)
ZigZag 15.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Installed TWAIN devices: NONE
IT CRASHES FOR NO REASON, i can open the programme up and not use it still crashes, I have never had a problem with Windows. -
Elements 9 Cloning and Healing problems
My Cloning and Healing Tool doesn't work correctly. Both very often puts what I am cloning or healing (with content aware) somewhere else on the photo other than where I want it. Sometimes it put a large streak accross the photo as I make a small correction somewhere else. It use to work fine. System: Win 7, 64bit, large memory, large Hard Drive, new computer, no other software has been installed... Thanks so much
Thanks Barbara. This did make my problem a lot better, but it still misses up from time to time as discribed, so I just hit rest tool in top left corner and then I'm good to go for awhile. I can live with that, unless you have another idea that can help. Thanks so much.
-
I am having all kinds of trouble with itunes and updating my ipad. I open itunes up but it doesn't do anything except open to a blank screen. I try to access the itunes store but it won't go there. When I connect my ipad, and try to update it, it starts and then I get a message that says backup cannot be saved on this computer. I have tried everything suggested to no avail. This is the 2nd or 3rd time I have had problems with itunes. Sometimes I even get a message that I am not connected to the internet.
I have uninstalled and re-installed. Any help?You might not have enough space left on your hardrive.
-
Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.
Hi FuzzyDunlopIsMe,
Welcome to the Support Communities!
It's possible that resetting your password multiple times has triggered this security. Click on the link below for assistance with your Apple ID Account:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Here is some additional information regarding your Apple ID:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Click on My Apple ID to access and edit your account.
Cheers,
- Judy -
I downloaded Firefox 4.0 and it says to re-install the toolbar but I have not been successful in doing so. I went to the forums and tried all the suggested fixes but none worked. Can I go back to the older version? I had no trouble with that and I do not like this new version at all. I tried a system restore twice and it did not fix the problem.
I would imagine it's the MyWay Searchbar which is classified by most anti-malware scanners as adware, or even worse as spyware. I say that because I see "SmileyCentral" in your list of plugins and that's an add-on for that particular toolbar. You can disable that via Tools | Add-ons | Plugins.
There are a number of toolbars which won't work with Firefox 4 anymore due to the enhanced protection mechanisms in the browser.
Mozilla recommends that you only install add-ons from its own security site @ https://addons.mozilla.org/en-US/firefox/?browse=featured Generally speaking, those have all been tested and approved. The exceptions are those currently under review which are marked with a yellow banner to warn users that they haven't passed Mozilla's labs yet. -
Trouble with Mail and Maverick
Trouble with Maverick and Mail - contacts (groups) will not load into address bar in mail.
Check that the mac's preferences for icloud is still connected to the proper account. Be sure photo stream is turned on.
You haven't described what "trouble" your mail account has. -
Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?
Not having the problem, don't personally know anyone who is.
-
Trouble with export and import
I am having trouble with export and import
here is what I did...
exp "'/ as sysdba'" PARFILE=parfile.txt
PAFILE
TABLES=user1.Table1
file=Table1_1006.dmp
LOG=Table1_1006.log
query="where to_char(processeddate,'YYYYMMDDHHMISS') between to_char(to_timestamp('1911-01-01 00:00:00','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS') and to_char(to_timestamp('2011-10-06 16:46:26','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS')"here is my log from export
set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
Current user changed to user1
. . exporting table Table1 16019049 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.Then I started importing
/database2/rdbm15> imp "'/ as sysdba'" file=Table1_1006.dmp fromuser=user1 touser=user1 tables=Table1 log=imp_Table1_1006.log
Import: Release 10.2.0.5.0 - Production on Thu Oct 6 19:57:01 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export file created by EXPORT:V10.02.01 via conventional path
import done in US7ASCII character set and AL16UTF16 NCHAR character set
. importing user1's objects into user1
IMP-00015: following statement failed because the object already exists:
"CREATE TABLE "Table1" ("APPROVALTRACEID" VARCHAR2(64), "REQUESTOR"
"EID" VARCHAR2(9), "EID" VARCHAR2(9), "FIRSTNAME" VARCHAR2(32), "LASTNAME" V"
"ARCHAR2(32), "MIDDLEINITIAL" VARCHAR2(8), "TIER" VARCHAR2(3), "JOBTITLE" VA"
"RCHAR2(64), "JOBCODE" VARCHAR2(10), "EMPLOYEETYPE" VARCHAR2(2), "CONTRACTOR"
"TYPE" VARCHAR2(2), "EMPLOYEESTATUS" VARCHAR2(2), "COSTCENTER" VARCHAR2(10),"
" "COSTCENTERDESCRIPTION" VARCHAR2(50), "CONTRACTENDINGDATE" VARCHAR2(8), "A"
"CCOUNTSTATUS" VARCHAR2(2), "LOGINID" VARCHAR2(70), "APPLICATIONGROUP" VARCH"
"AR2(50), "APPLICATIONNAME" VARCHAR2(50), "APPLICATIONID" VARCHAR2(12), "LEV"
"EL1" VARCHAR2(512), "LEVEL2" VARCHAR2(512), "LEVEL3" VARCHAR2(512), "LEVEL4"
"" VARCHAR2(512), "LEVEL5" VARCHAR2(512), "PROFILECODE" VARCHAR2(50), "PROCE"
"SSEDDATE" DATE, "APPROVERMANAGEREID" VARCHAR2(9), "APPROVERMANAGERDELEGATEE"
"ID" VARCHAR2(9), "APPROVERT4MANAGEREEID" VARCHAR2(9), "APPROVERT4MANAGERDEL"
"EGATEEID" VARCHAR2(9), "APPROVERAPPOWNEREID" VARCHAR2(9), "APPROVERAPPOWNER"
"DELEGATEEID" VARCHAR2(9), "PERFORMEREID" VARCHAR2(9), "NATIONALID" VARCHAR2"
"(30), "COUNTRYCODE" VARCHAR2(9), "PASSPORTID" VARCHAR2(20), "DATEOFBIRTH" V"
"ARCHAR2(15), "CITYOFBIRTH" VARCHAR2(15), "VENDORNAME" VARCHAR2(50), "VENDOR"
"MANAGERNAME" VARCHAR2(50), "VENDORMANAGERID" VARCHAR2(9), "VENDORADDRESS1" "
"VARCHAR2(100), "VENDORADDRESS2" VARCHAR2(100), "VENDORSTATEPROVINCE" VARCHA"
"R2(15), "VENDORCOUNTRYCODE" VARCHAR2(9), "VENDORZIPPOSTALCODE" VARCHAR2(9))"
" PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 4076863488 "
"NEXT 1048576 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) "
" LOGGING NOCOMPRESS"
Import terminated successfully with warnings.but I did not get rows to database2
[server1]database2
/database2/rdbm15> sqlplus / as sysdba
SQL*Plus: Release 10.2.0.5.0 - Production on Thu Oct 6 19:59:17 2011
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select count(*) from user1.Table1;
COUNT(*)
0
SQL> exit
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for HPUX: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - ProductionEdited by: user3636719 on Oct 6, 2011 5:23 PMuser3636719 wrote:
Thanks for the reply...
Old EXP IMP doesnt have capability to append the row, since you're using 10g use datapump instead. use option TABLE_EXISTS_ACTION=APPENDso my import should be like this
imp "'/ as sysdba'" file=Table1_1006.dmp fromuser=user1 touser=user1 tables=Table1 log=imp_Table1_1006.log TABLE_EXISTS_ACTION=APPEND
Did you look up the command line syntax and control options for imp?
You should make it a habit that whenever anyone - especially a stranger on the web - gives you a bit of code or references a command or init parm or any some such, the VERY FIRST thin you should ALWAYS do is look it up for yourself and see exactly where and how it is used and what it means. That is how you grow beyond having to be spoon fed every little thing and become more self-sufficient.
If you had, you would have seen that there is no TABLE_EXISTS_ACTION option for imp and seen that it is an option for impdp. And realized that exp and imp are NOT the same thing as expdp and impdp.
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com.
Drill down to your product and version.
<b><i><u>BOOKMARK THAT LOCATION</u></i></b>
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab you will find the complete documentation library.
Spend a few minutes just getting familiar with what <b><i><u>kind</u></i></b> of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what <b><i><u>kind</u></i></b> of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are <b><i><u>reference</b></i></u> manuals. Just get familiar with <b><i><u>what</b></i></u> is there to <b><i><u>be</b></i></u> referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
================================= -
I am running Photoshop CC 2014 on iMac OS X and have recently had to reinstall the OS following upgrade to an SSD. I cannot update Photoshop as it says it is unable to extract the downloaded files (U44M1/2010). Should I reinstall Photoshop and Bridge from scratch or is there an easier way?@@ !
Sounds like you transferred programs from another drive? This isn't a very good way to do it. Yes, re-install the Adobe apps.
Benjamin -
TO ALL THOSE HAVING TROUBLE WITH ICHAT AND AIM ON MACBOOKS
I've had a lot of trouble with AIM and iChat on my new Macbook, but I believe I've figured out the answers to all the problems I and others have encountered.
Firstly, for those who's AIM continually crashes and displays the message "The application AIM unexpectedly shut down," my answer to your problem is too many sent messages. Watch the bar in the bottom left of your chat window, when it reaches red, your application will probably shut down.
Secondly, for those experiencing difficulties with iChat, it's most likely a problem with communitcation between your wireless router and your computer. Try these steps:
1. From the Apple menu, choose System Preferences.
2. From the View, choose Sharing.
3. Click the Firewall tab.
4. Click New.
5. From the Port Name pop-up menu, choose Other.
If you have a Macbook, you'll probably have a TCP Port Number Bar and a UDP Port Number Bar. Try these steps:
1. In the TCP Port Number(s) Bar, type: 5190, 5298
2. In the UDP Port Number(s) Bar, type: 1024-5219, 5221, 5223-65535
3. In the Description Bar, type: iChat AV
4. Click OK
5. Click Start above the window with your firewall settings, and make sure the box next to iChat AV is checked
6. Relaunch iChat
Good Luck! I hope this solves some of the problems that people have been encountering.Rob
My Linksys is the WAG54G, which might be different from your WRT54G. Currently, UPnP is disabled and the Router ports are a bit of a mystery, because they're forwarded to an IP address that's outside of the current DHCP Address Range! Once I got it working, I was reluctant to change it even though it looked anomalous.
The Firewall is on, with the iChat ports open that I listed in the previous post.
My two regular buddies are my sons, who both use Trillian Pro on a Windows machine. Works pretty well despite occasional freezes or garbled sound.
Hope you get sorted soon.
Dave -
I am havering trouble with safari and apps shutting down on me all the time what can I do to resolve this problem. Thanks :-)
Make sure you have enough free space on your iPad. With iOS 7 it is recommended that you have 15-20% of the storage space on the device free. For a 16 GB device that is 2.4-3.2 GB free. For a 32 GB device that is 4.8-6.4 GB free. For a 64 GB device that is 9.6-12.8 GB free.
Also try a reset. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem. -
Hi, everyone.
I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-
after running get-OWAVirtualDirectory or test-OWAConnectivity i'm getting a message that says "OWA it's Orphan, No Metadata information can be found."
I only have the OWA users impacted.- anywhere users, and ActiveSync are working well.-
Thanks,
Fabian Alberto Campo
MCT-MCSA 2012-MCITP365-MCTS
Fabián A. Campo H. Consultor tecnico @ IXO Ltda. MCT MCP MCTS MCSA HP-APS Cra. 67 No. 167 – 61 of 303 Bogotá, ColombiaHi Fabian,
Is there any error code when user access their mailbox on OWA. Please confirm if there is no results returned in EMS when you run Get-OWAVirtualDirectory cmdlet. Also check whether there is any Event Logs related to OWA in Exchange.
In IIS manager, make sure the OWA virtual directory is listed in the Default Web Site. In EMC, we can navigate to Server Configuration > Client Access, select server and turn to Outlook Web App tab. Then we can click Reset Virtual Directory in the right
Actions pane to reset OWA virtual directory.
Additionally, please restart IIS service by running iisreset /noforce from a Command Prompt window.
Regards,
Winnie Liang
TechNet Community Support
Maybe you are looking for
-
Mini displayport to vga adapter doesn't work. thoughts?
MacBook Pro, OS 10.7.5 apple mini displayport to VGA adapter + VGA cable to tv. galaxy image shows on tv screen, but computer signal doesn't seem to be getting there. have i missed something? tnx! Janeai
-
Hi, I'm planning to buy a full HD (1080p) plasma to use with my mini as an AV server connecting via a DVI-HDMI cable. My question is about upscaling standard DVD content: If I play a 'standard' def DVD through the mini (either from the disc or from a
-
Copa derivation rule for customer group
Hi All, I am currently facing an issue with Derivation rule and hope someone can help me on resolving this.I have created a COPA derivation rule which has field as Source Field company code Plant Target field Distribution channel Condition customer
-
Windows Services, Timers & Threading
I have a self hosted WCF service. I have 2 methods that need to run periodically so the Host Service has 2 System.Threading.Timers. Timer1 has a long running process. May take up to a minute to run. Timer2 has a method that is quick but MUST run ev
-
DL the latest driver from HP. Ran .pkg install, 'add'ed printer per instructions. It's connected via USB directly to my Mac Mini G4. It prints the following every time: %!PS-Adobe-3.0 %RBINumCopies: 1 %%Pages: (atend) %APLDSCEncoding: UTF8 and some m