Photoshop cc 3d don't work! Help?

The 3d option is not there. I have 1024mb for video and in prefrences I have my nvidia gt610 selected. I can't find any other suggestions online and need help

Yes
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.1 CUDA 6.0.1
OpenGL Version: 2.1
Video Rect Texture Size: 16384
OpenGL Memory: 2048 MB
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 770/PCIe/SSE2
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 770
I jsut found another tread that says it could be an error caused by installing CC over top of another PS / Version.
t

Similar Messages

The sound of my computer don't work, help me.

The sound of my computer don't work, help me.

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

I mac is snow leopard I bought for 19.99 mountain lion online an my computer has gray screen with the spinning wheel and don't work help me z

My computer I Mac is 10.6.5 I think but the issue was when I update it ask me for version 10.8.5 that was mountain lion wich I bought it for 19.99 Iand know is not working it had a gray screen with spinning wheel I have snow leopard on my iMac I bought mountin lion know the screen I grey I can't do nothing I reboots don't work I inserted the cd for my I Mac don't work can't do nothing I can't remove the cd can someone help me .

To get the CD to eject, hold down the mouse, or if you use it, trackpad, button while you reboot ... keep holding the button down until it ejects. If that doesn't work, this Apple note has some other steps.
See this Apple note on steps to take to deal with the grey screen.
Your iMac needs to be mid-2007 or newer with 2GB minimum memory (4GB+ is recommended) and 8GB or more of available disk space. You also should be at OS X 10.6.8 Snow Leopard to access the App store and install OS X 10.8 Mountain Lion.

Armenian fonts installed and show up in Photoshop, but they don't work.

Hi,
I have a Mac OSX 10.6.8 running on Snow Leopard. I have Photoshop CS5. I installed about 10 different Armenian fonts (ttf file extensions) and unzipped them. I double clicked them all and installed them into my Font Book. They appear in Final Cut Pro and in Adobe Photoshop, but they do not work. I previously installed the Armeast font and that is the only font that will work in both programs. If I highlight my text and switch to any of the other Armenian fonts--ArmScript, Mshtakan, etc., it will just jump back to the default Armeast font. And the other Armenian fonts--ArmArt, ArmScool, Araratn, Arial ArmenianNew are listed as Latin characters "Sample." I really hate the default Armeast font and there are so many beautiful fonts I would rather be using. Is there any way to enable them to work in Photoshop? I have read through other threads and I couldn't find what I was looking for to answer my question.
Thank you very much,
m

I have the same issue, : (
Have you found any solution for it yet? please let me know if you did.
Thanks

[HELP] Ipod Nano Buttons Don't Work [HELP]

Okay, I had got my Ipod on December 25, 2006, but now I recently came by a problem.
I charge my Ipod, and then take it out the right way. When I try to listen to my songs, the buttons don't work, the only button that works is the HOLD SWITCH. This is getting on my nerves. Do anybody know how to fix this problem? I might have to get another one or send in for repairing. Thanks.

First try a reset...
Put the hold switch to the OFF/White position. Now toggle it ON/orange then back off again. Then press and hold both the MENU and center buttons on the iPod and hold them for a good 15 seconds or so. Your iPod should reboot starting with the Apple Logo screen.
Obviously if your buttons are truly broken the above won't work, but worth checking anyway.
Next, try restoring the iPod and see if that clears it up.
If not, then you may have an actual hardware failure.
Patrick

My photoshop Elements 12 has stopped working, help!

I am urgent need of asistence, I have recently bought the full version of Photoshop Elements 12 and it has ubruptly stopped working. The software has been working perfectly up untill this point. On opening the package either from the start or through an image, the software opens and the tools load, however a message then appears. "Photoshop Elements 12 Editor has stopped working, A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". As an art student it is imperative that this is resolved promptly, please help

Dear Barbara B
Tried out your advice, unfortunately it did not succeed in fixing the problem.
So back to square one I am afraid. But thank you very much for your help and if you can advise on any other solutions it would be greatly appreciated.
Kind Regards
Samantha Holland
Sent from Windows Mail

I upgraded to Lion, now Photoshop and AfterEffects don't work. They are no longer supported. Is there an upgrade? What are my options?*

I just upgraded to Lion. Unfortunately I found too late that PowerPC software is not supported. I have already lost one day of business. How can I go back to Leopard, or is there a upgrade for the software that no longer works on Lion that will support its existence in the Lion environment. Any and all help is appreciated. I am trying to run a business that operates with Photoshop and AfterEffects.
Thank you,
Michael

Versions of Photoshop and After Effects that old (PPC code only) have to be the original CS or older.
The cheapest fix is to revert to Snow Leopard. If you need/want to remain in Lion, then upgrade to CS 5.5. All of its apps have been updated to work as expected in Lion.
Since there is no upgrade path from CS to CS 5.5 (you'd have to pay full price), then, if you can, you may as well wait until CS6 is released. Going by Adobe's typical upgrade cycle of 12 - 18 months, the earliest possible release will be sometime this fall.
One page on Adobe's site notes that the oldest software that qualifies for an upgrade to CS 6 will be CS 3. Upgrade prices have been ranked by age the past few years. People upgrading from CS 3 will pay more for CS 6 than someone upgrading from CS 5.

Surround sound speakers don't work help

I recently bought a new sony bravia t.v. and a sony all in one blu-ray disc/dvd all in one home theater system. We cannot get the surround sound speakers to work watching regular television. Can anyone help solve this problem? Any help is appreciated, Thanks, Ken Please write to {Removed per Forum Guidelines}

JUANGONZ is correct. The easiest way to get the surround is to take an optical cable from the cable box to the input on the back of the Sony receiver. You will have to change the input on the Sony to digital in. Make sure you have Dolby Digital enabled on the cable box settings. Also important is that most standard definition content is broadcast in stereo, usually only high definition is broadcast in 5.1 surround.
If you can stop in at your local Best Buy, I am sure they would be happy to show you on a display unit, or setup an appointment to have a Geek Squad Installer connect your components if you would like.
Justin
++++++++++++++++
Although I am an employee of Best Buy, my comments and opinions are my own and do NOT necessarily reflect the opinions of the Best Buy Company.

My Ipad 2 won't reboot. the little circle keeps going round but the buttons don't work. help please.

My Ipad 2 won't reboot. The little circle keeps going round but that's all, it won't boot. nothing happens when I press the button on the top either. Please help.

After you hold the power and home buttons at the SAME time until the Apple Logo appears (ignore the red slider to shut down) then let go of both buttons and you don't need to do anything else. Your iPad will restart all by itself. Just be patient, but leave your iPad alone after the Logo appears.

Photoshop generate plugin don´t work

Hello,
I have installed the new Reflow generate plugin and it is in the plugin folder, but i can´t find generate in the file menu.
Please help,
Alex

Hi Alex,
Do you have this CC icon in you upper left?
The Photoshop CC should be present an have the blue Update button. If it shows no updates, you may need to quit and relaunch the application.
regards,
steve

MAC 10.8.3 Every morning when I wake the computer up programs don't work, HELP

At night I put my computer to sleep and when I come in the morning the computer wakes up and everything looks ok until I start trying to use my programs. Things don't open and function correctly. Then I shut everything down and try to Shut Down the computer and it goes to the grey screen and just sits there. I have waited up to 10 min's and nothing happens so I have to manually power down the computer. Then I turn it on and everything works.
Why is this happening, anyone else have this problem?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Z77a-gd55 OC in bios ??? don't work help

hi
i have
msi z77a-gd55
intel i-5 3570k
my problem is when i try to overclock in the bios
I am unable to change the cpu ratio and the cpu core voltage
i don't know what i have to change to make overclock in the bios
it's stock at standar mode i cannot go in oc genie and eco
help please

Are you highlighting the item to be changed using the keyboard arrow keys? Then using the keyboard numbers pad plus and minus keys to change the value? Hit F10 and Enter to save your settings when done.

IPod and iTunes don't work, HELP!!!

I bought a few albums a week or so ago and didn't bother to burn a copy. Next, I got a few new CDs for Christmas, so I decided to upload them to iTunes. I had started when I had to log off of my account for a while. So, I logged off for about an hour, and I tried to get back on iTunes to finish uploading the CDs, but it wouldn't open, and I couldn't digure out how to get it to open. Then I went on vacation for about a week, and on about the third or fourth day my iPod (Classic, 30 GB, made in 2006) started spazzing out. It would play but the screen stayed the same, or it would "pause" without actually pausing. So I did the thing the support tells you to do , toggle the hold button, then press the middle and menu button simultaneously. I did that twice, cause the first time it didn't work. The second time I did this, it seemed to work, but then the screen just went black. I hit the menu button to see if that would help, but instead of making my iPod good as new, the screen went white and said "Connect to your computer. Use iTunes to restore." So, I obviously couldn't, because my computer was at home, and I wasn't. I waited till I got home (yesterday night) and restored my computer to a time I knew iTunes was working, and went to sleep cause it was taking a long time.
This morning, I got up and tried to open iTunes, but a window popped up that said Quicktime was not installed and iTunes needs Quicktime to run. so, I reinstalled Quicktime and when I tried to open iTunes, another window popped up that said that the Quicktime I had was 5.5(I think) and it needed 5.7 or later. So I uninstalled Quicktime and reinstalled it with Apple. I tried again to open iTunes, but yet another window popped up that said something like "Your library cannot be opened because it was installed on a more recent version of iTunes. So here I am now, after being on the computer all day, after repeatedly uninstalling and reinstalling Quicktime and updating iTunes several times, completely confused. Is there any way to get my library back and restore my iPod? Any and all hints are desperately wanted. Please help!

http://support.apple.com/kb/HT1808

Pdf preview don´t work. help

Hi
i have problem in tab pdf preview, when i click there appear this message: Warining security:
"the current security settings do not allow the transfer of this file"
Can you help me?
Thanks

seems fixed with this method:
http://groups.google.it/group/it.comp.macintosh/browse_frm/thread/6954f6bcc67df8 a8/7860bf2927f8380d

Elements 10 out of bounds extension tool don't work*help

new to this and was doing well till got to this stage clicked on extension tool and all I get is a hand don't know what I am doing wrong

Choose the Quick Selection tool. Then click on the parts of your photo outside of the frame. Keep clicking until you have everything you want selected. Don’t worry if you make a mistake and select too much. Hold down the alt key and you can click to subtract.

Photoshop cc 3d don't work! Help?

Similar Messages

Maybe you are looking for