Photoshop CC (64 bit): Entry Point not found

Hi,
Just updated the Photoshop CC (64 bit) and after update the whole thing does not work anymore. When you try to start Photoshop CC you get an ugly message stating:
Photoshop.exe - Entry Point Not Found
The procedure entry point
?ProposeSearchBounds@StructuralImageEditing@@YA?AVBox@1@AEB ...
could not be located in the dynamic link library D:\Program Files\Adobe\Adobe Photoshop CC (64bit)\Photoshop.exe
Any ideas? I really need the P CC so any help is valuable! The platform is Windows 8 / 64 bit and the P CC used to work..
Update:
The 32-bit version of P CC works. So it is only the 64 bit version that does not start.
Message was edited by: Jari.O

@ Talha1997,
Please follow the below mentioned steps let me know if they work:
1. Uninstall current Ps CC app, If there are any issues with CC uninstall then run the Cleaner tool to remove Ps CC :http://www.adobe.com/support/contact/cscleanertool.html .
2. Restart your system
2. Install Ps CC app from Creative Cloud
3. Do not launch Ps
4. Update to 14.1.2 via the Creative Cloud desktop application
5. Once the updates are successfully applied, Launch Ps CC to verify.
If it does not work please let me know, I would try to resolve it over a connect session.
Regards,
Ashutosh

Similar Messages

  • Problem opening PSCS5 32 bit - Photoshop.exe Entry Point Not Found

    I am having a problem opening 32 bit version of Photoshop CS5 in Windows 7.  The 64 bit version opens fine, but when I try and open the 32 bit version, the following window opens: “Photoshop.exe – Entry Point Not Found”  X The procedure entry point_CFCreateApplicationRepositoryPath could not be located in the dynamic link library CoreFoundation.dll.  My only option in this window is an OK button.  If I click this button several times, the program eventually opens. Below is screen shot of the error window.
    Thanks,
    Matthew Kraus

    Thanks Zeno and others.  Uninstalling Quicktime and then reinstalling it was the fix.
    Thanks again,
    Matthew Kraus

  • Photoshop.exe - Entry Point Not Found (MSVCP80.dll)?

    Hey guys, new to the board here and pretty much at the end of my rope.
    Starting maybe 2 days ago I began getting quite a strange message when I tried to open Photoshop CS3.
    I'd send a jpeg of the window but with photoshop down i'll settle for just typing this crap out:
    Photoshop.exe - Entry Point Not Found
    The Procedure entry point ?replace@?$basic_string@DU$char_traits@D@std@@V?$a llocator@D@2@@std@@qaeaav12@IIPBD@Z could not be located in the dynamic link library MSVCP80.dll
    Now, that's a mouthful! Fortunately i'm at least computer literate enough to dig around on google.
    After doing that, I came up with nothing. I found a replacement for the DLL that it's having trouble with, but that did nothing.
    I then tried out a program called Registrybooster, which found quite a few problems with my registry but failed to correct whatever is causing this problem.
    So I tried to backtrack a little bit and see if anything I had done since the last time the program worked (wednesday the prior week) had broken it. I had shut off some startup programs so i figured maybe that had something to do with it. Unfortunately undoing those changes had absolutely no effect at all.
    I then tried out doing a repair install, which did nothing. After this, I did an uninstall and reinstall and... nothing.
    Some extra info: I run windows xp home edition on this PC and have it updated to SP3.
    I've had photoshop on it for about a year with no problems.
    Hopefully someone can help me here. Almost every thread I located with similar problems via google either went unanswered or the answers given didn't actually help me out.
    Someone save me!

    Hi Chris, thanks for chiming in on my problem.
    I'm doubtful of it being TWAIN/WIA caused, but will look into it. I have a wacom tablet and a canon scanner so who knows. What would you suggest I do to see if those two are causing anything in particular? (Not sure why they would as I haven't made any changes to the programs or hardware involved recently.)

  • Entry point not found - iTunes 10.7 for Windows (64-bit) reinstall

    After ignoring iTunes update prompts for about 2 years, I recently tried updating to the latest version (12.1) without success.  After searching for solutions to this problem online, I decided to uninstall iTunes and try reverting back to iTunes 10.7 for Windows 64-bit (on my Windows Vista laptop).
    At this point I have installed, repaired, uninstalled, reinstalled, and repaired the 10.7 version and am still unable to access iTunes.  When I try to launch iTunes, I get the following error messages:
    "iTunes.exe - Entry Point Not Found
    The procedure entry point CMTimeRangeMakeFromDictionary could not be located in the dynamic link library CoreMedia.dll."
    When I click OK, I then get:
    "iTunes was not installed correctly.  Please reinstall iTunes.
    Error 7 (Windows error 127)"
    (As I stated above, reinstalling hasn't worked!)
    In my online troubleshooting searches, I've found posts regarding entry point issues but none with "CMTimeRangeMakeFromDictionary" or "CoreMedia.dll" in them.  I'm unsure what to do next (should I attempt iTunes 12.1 again?), and my biggest concern is that I will somehow lose all my music.  Any help would be greatly appreciated!  Thank you

    Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • HELP....Error Message...Photoshop.exe-Entry Point not found

    Hello
    I bought the Adobe Photoshop cc and it has been working great untill this morning when i tried to open it, i got this error message:
    Photoshop.exe-Entry point not found
    The procedure entry point
    ?terminate@struturalimageeditingYAXXZ
    Could not be located in the dynamic link library Patchmatch.DLL.
    I have tried to redown load but keeps saying that it is downloaded
    Help please
    Bobbi-Lee

    Please follow the below mentioned steps let me know if they work:
    1. Uninstall current Ps CC app, If there are any issues with CC uninstall then run the Cleaner tool to remove Ps CC :http://www.adobe.com/support/contact/cscleanertool.html .
    2. Restart your system
    2. Install Ps CC app from Creative Cloud
    3. Do not launch Ps
    4. Update to 14.1.2 via the Creative Cloud desktop application
    5. Once the updates are successfully applied, Launch Ps CC to verify.

  • Error : Photoshop.exe - Entry Point Not found

    I have downloaded Photoshop cs6 trial and when i click the Photoshop icon to open the software i get a window:
    Photoshop.exe - Entry Point Not found
    The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERENEL.32.dll."
    -Jitu

    Install SP3. It's required in order to run Photoshop on Windows XP.
    http://www.adobe.com/products/photoshop/tech-specs.html

  • Flash CS5 wont open after working for years? Entry point Not Found

    Hi Guys,
    I am having a problem opening my Flash CS5 after it working fine since I installed it forever ago. I do not know what could have caused this, and my other cs5 programs are opening fine.
    Dreamweaver and Fireworks didnt change all (these 3; along with Flash; are what I use most)
    I also open photoshop and aftereffects from my master collection for testing and they opened fine also. I ran a scan using microsoft essentials and found nothing.
    I tried run as administrator on flash and it said the same thing.
    I am using windows 7 Ultimate N SP1 64 bit
    Here is the alert in text.
    flash.exe -Entry Point Not Found
    The procedure entry point ?ButtonChanged@UI_ClearButtonTextEdit@controls@dvaui@@UAEXP
    AVUI_ButtonChangedMessage@23@@Z could not be located in the
    dynamic link library dvaui.dll
    Please let me know what is going on here.
    Thanks, I really appreciate the help.
    Randy

    You should be able to cherry pick Flash out to uninstall and reinstall it from the master suite installer if I remember correctly. There's nothing wrong with a fresh reinstall, especially after years. That's a long time to be bulletproof.
    Otherwise I can't hand you a commercial DLL but I really don't think your problems will be fixed even if I did. I think it's just hardware doing what it's notorious for, eventually having a fault somewhere. A reinstall of Flash should be fast and will write to new sectors and fix the file.

  • Why is my itunes not installing properly? I installed it and it was fine, then it started to show Errors. iTunes exe - Entry Point not Found. And the Error 7 (Windows error 127).Itsays to reinstall iTunes. I did that and same error. new pc, same on old

    Why is my itunes not installing properly?
    I installed itunes day before yesterday,  I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
    I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
    on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
    iTunes exe - Entry Point Not Found
    The procedure entry point
    AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
    be located in dynamiclink library F:\Programmes\iTunes.dll
                                                                                               OK
    then after pressing 'OK' the following message:
    iTunes
    iTunes was not installed correctly. Please reinstall iTunes
    Error 7 (Windows error 127)
    I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
    The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
    Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
    Regards,
    Damian36

    I started up and plugged in my iPad  and then the following message came up:
           iTunes
    ❗️This iPad cannot be used because the required software is not
        Installed. Run the iTunes installer to remove iTunes, then install
        the 64-bit version of iTunes.
                                                                                             OK
    I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
    Started the install and then received this message:
          Apple Mobile Device Support
    ❗️Service 'AppleMobile Device' (Apple Mobile Device)
        failed to start. Verify that you have sufficient
        Privileges to start system services.
       Abort.               Retry.                Ignore
    I tried all tree options, last being ignore.
    I continued to download the other 2 you suggested with out any drama.
    I did a system restart and then opened iTunes.
    Connected my iPad
    Then message appears:
          iTunes .exe - System Error
    ❌ The program can't start because CoreAdioToolbox.dll is missing from
          Your computer. Try reinstalling the program to fix the problem.
                                                                                           OK
    Press OK and then the next message:
           iTunes
    ❌ iTunes was not installed correctly. Please reinstall iTunes.
          Error 7 (Windows error 126)
                                                                                           OK
    Any suggestions?

  • Help! Another "Entry Point Not Found" Error

    Hello,
    I purchased iPhone 4 earlier this week and went to synch it last night. Apple Updates updated and crashed several times, now iTunes won't even start. I already had it set up for my iPod, my iPad, and a prior iPhone, so just plugged my new iPhone in and went to town. iTunes did update all my apps before I used Apple Update. I was trying to get the OS updates for both my iPhone and iPad, but now it doesn't work. I tried downloading iTunes again and running the fix and it didn't work. I am runing Windows 7 64-bit.
    Here is my error message:
    iTunes.exe - Entry Point Not Found
    The procedure entry point
    kCMByteStreamNotification_AvailableLengthChanged could not be
    located in the dynamic link library CoreMedia.dll
    Then a second dialog box pops up that says:
    iTunes
    Itunes was not installed correctly. Please reinstall iTunes.
    Error 7 (Windows error 127)
    Please help!
    Thanks, Sean

    Hi vladdy007,
    Please upgrade your OS to Win XP SP3. This would fix the problem. The minimum spec for running AI CS6 is Win XP SP3.
    Thanks and Regards,
    Nishant Kumar Thakur

  • Safari.exe - Entry Point Not Found

    I just recently installed Skype because Yahoo! instant messanger has been giving me problems.  Safari was running just fine last night, and when I turned my computer on this morning, I received this message:
    Safari.exe - Entry Point Not found
    The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
    When I click "OK," I receive this message:
    Safari can't open.
    Your copy of Safari is missing important software resources.  Please reinstall Safari.
    I have reinstalled Safari several times, but I still receive the same messages.  I had found a thread from 2010, and attempted to try what was suggested on there, and it suggested to uninstall the AAS as well as safari, and now I cannot open iTunes.  This is very bothersome because I use Safari as my primary browser.
    Some aditional information, I am using a PCLaptop and running Windows 7.  I have a lot of things saved in my bookmarks on Safari, and really would not like to use them.  Also, I am a bit computer illiterate and need everything spelled out for me.
    Help please!

    Safari for Windows is long dead. I suggest you remove it and let it rest in peace.

  • ApplySyncNotifier.exe- Entry Point Not Found?

    Ever since I loaded the newest "update" on iTunes, when I turn on my computer I get the following error message:
    ApplySyncNotifier.exe- Entry Point Not Found
    The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
    I searched the forums and found some replies but none of them work for me--could it be because those answers were for Windows Vista?  I have Windows 7, 64 Bit.  ny ideas?  I'm tired of this error message popping up constantly and nothing I hve tried has fixed it.  I really don't understand why people love Apple products so much, it seems like I constntly have issues with my iPod and iTunes....

    This executable belongs to Citrix: http://www.file.net/process/wfica32.exe.html
    Please ask them in Citrix forums or contact their support for assistance.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • ITunes.exe - Entry Point Not Found itunes will install but wont run!!!!!!!!

    I updated itunes and it wont work. i unistalled all apple apps, about 5 to 10 times. i get this message on my HP 530,32 bit windows vista. At the top in the error window it says
    *iTunes.exe - Entry Point Not Found* Then under that in the error box it says:
    *The procedure entry point*
    *QTCF_CFUniCharGetUnicodePropertyDataForPlane could not be located in the dynamic link library QTCF.dll.*
    What do i DO PLEASE HELP ME OUT!!!!!!!!

    I found the qtcf.dll file in the sys32 moved it to the desktop tried iTunes and still same error message as above.
    Okay ... sometimes there can be multiple copies of them lurking about on a PC.
    Try heading into Computer, and typing QTCF.dll in your Search field. When Vista tells you it can't find the file, click "advanced" and tick the "Search hidden, non-indexed and system files (might be slow)" and then start another search.
    This search *will indeed be slow.* Wait until the green progress bar up at the top of the screen has completely vanished, otherwise you might accidentally stop the search too soon.
    What copies of QTCF.dll do you find, and where are their file locations? (The default location on a 32-bit Vista PC is in C:\Program Files\QuickTime\QTSystem\QTCF.dll)

  • Error messages - DDE Server Windows itunes.exe - Entry point Not found and iTunesHelper.exe - The procedure entry point asl_add_log_file could not be located in the dynamic link Library ASL.dll

    Hi
            I have tried to research these problems I am getting, but have not been able to resolve them.
    1st is the above DDE Server Windows iTunes.exe - entry point not found.
    This only occurs when I try to start iTunes.
    if I click ok , several times, iTunes will start but slowly.
    If at any time I have to reboot my computer I get
    iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
    if I click 3 times OK it goes away.
    To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
    Installing it but still get the same errors on reboot and trying to run iTunes
    Anyone any ideas please.
    I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
    Ram 4.00GB
    32bit OS
    Windows 7 Ultimate SP1
    Firewall - Zonealarm
    Virus   -  Zonealarm
    Thanks in advance
    Steve
    Message was edited by: Ybslik
    Message was edited by: Ybslik

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • When I start my computer I get a "AppleSyncNotifier.exe Entry Point Not Found message.  I also get an error message when trying to sync with iTunes that a backup session cannot be started.  How do I fix this?

    In the last few days when I start my computer, I get a box that opens with "AppleSyncNotifier.exe" Entry Point Not Found in the title.
    It says:  "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll.
    I have tried uninstalling and reinstalling iTunes and still get an error message when trying to sync my phone with iTunes
    "iTunes could not back up iPhone ####, because a session could not be started with the iPhone."
    The last time I tried to sync my phone (iPhone 3G S) with iTunes, everything seemed to freeze up at Stage 4 of the sync process. 
    Any advice????

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • When I turn on my computer,an error message says  "AppleSyncNotifier.exe-entry point not found The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll". Can't access itunes store,sync,buy etc. Help...

    When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll"  Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "libxml2.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "libxml2.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

Maybe you are looking for