Photoshop CC 64 bits shows only 2GB of RAM while I have 4GB

Photoshop CC 2014.2.2 (64 bits) displays only 2GB of RAM in preferences/performance menu, while it should show 4GB and my Windows 7 Ultimate is 64 bits.
My RAM is a single 4GB card.
This also happens in Windows 8.1. Maybe the mouse lag is also caused by this.
How can PS show my entire RAM?

I'm not an expert, but this doc confirms, that your OP Windows7 Ultimate x64
supports 4MB, in fact up to 192 MB:
http://en.wikipedia.org/wiki/Windows_7#Extent_of_hardware_support
Best regards --Gernot Hoffmann

Similar Messages

MacBook Pro early 2011 System information shows only 2gb Ram installed but it came with 4gb ??

I have an eary 2011 model of Macbook Pro. It had 4gb of ram installed on it but i recently checked the system information ans found that it only 2gb installed
Please help me resolve this issue .

I'd say either a module fell out or died or was removed.

MacBook Air 13" Core 2 Duo showing only 1 GB RAM

My MacBook 13" Mid 2010 Core 2 duo shows only 1 GB RAM

What CT stated is that yes if what you see is accurate you have a bad RAM chip. Either Apple Support/Service has to Repair/Replace the RAM, or, You have to find a local shop (if you're out of waranty). Desoldering and soldering logic board components requires special tools, solder and lots & lots of practice.

Shows only 929M of RAM usable.....

Have over 4G of RAM but showing only 929M usable. Running win7-32 [so it should only show about 3.5G usable] on HP Envy dv7-7232CL. Origianlly came with win8. Any help????

Hi,
Looked into this more for you. Here is a Microsoft document that may have some information to help:The usable memory may be less than the installed memory on Windows 7-based computers
If you could, please provide a screen shot of the resource monitor on the memory tab.
Thanks.
I worked on behalf of HP.

E430 - System shows only 2.5GB RAM, I have 4GB installed.

Hello.
I have an E430 with Core i5 Ivy Bridge, 4GB RAM, onboard graphics. OS is Ubuntu 14.04 64-bit. No components have been installed or replaced since purchase.
The problem is, system only shows I have 2.5GB RAM total. In BIOS it correctly shows 4096GB RAM installed.
People suggested it might be the graphics allocating the rest of the RAM (which makes sense in a way, since I read at some other places that max. RAM for the graphics is set around ~1.5GB). And they suggested I should look in the BIOS for a setting which would influence this. I found none.
I got some info about the graphics using a command, and it shows:
Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
That does not look like allocating 1.5GB RAM to me.
Also there is this:
Kernel driver in use: i915
Is that the right driver?
Does anyone know whether it is really the GPU allocating way too much RAM? How could I stop it or make the currently-unused RAM available to the system again? Or is there another problem, not linked to GPU?
Thanks.

Free ram isn't the on,y ram that's available to run programs http://support.apple.com/kb/HT1342
BUT.....2gb is the bare minimum for running Lion, you need at least 4gb in reality. Your computer will run better with 4gb.

Photoshop CS5.5 not showing correct amount of RAM

I have a PC with 3.25 MB of memory. I recently purchased the Creative Suite CS5.5. I was modifying my Preference when I noticed on the Performance Tab, under Memory Usage, it says:
Available RAM 1569
Ideal Range: 863 - 1129
Let Photoshop Use: 941 MB
Anyone know why Photoshop is only seeing 1/2 of my memory?

Thanks for the explanation Chris and Sabastian. I appreciate you taking the time to provide a good explanation.
Mylenium, you have a way with words. Guess you have the gift of encouragement. I did see the "Available Memory" but I read it as that's how much physical memory Photoshop was seeing on my computer, not the amount of memory that was unused at the moment.
I'm pretty sleep deprived as of late so I know my brain's "Available Memory" is running low and not running to it's fullest capacity.

Should I use an i686 or x86-64 install for a PC with only 2GB of RAM?

I'm going to be mainly using it for browsing, movies, music, work, and also some Wine gaming.
If it matters, it also has an Intel Core 2 Quad Q6600 @ 2.4GHz and an ATI HD5770 1GB.
Also, I don't plan on upgrading anytime soon...

I got a 64 bit laptop in jan 2009. That's when I decided to switch to 64. All I can say is that (a) my laptop does everything I want (b) it was easy to make the switch, things are improving and I expect that to continue. Conclusion: go with 64.
However, I have not done any benchmarks to compare 32 vs 64. I doubt I'd notice any subjective difference. I also keep a partition with a "frugal" install of puppy linux and this is way faster day-to-day (loading apps) than any traditionally installed distro.
My main problem could well be something you may encounter: ATI GRAPHICS I use fglrx day-to-day because my laptop operates at a lower temp so I'm hoping to give it a longer life with less fan noise. BUT I get HD video tearing so I have a separate arch partition for video using the radeon driver which works just fine.

Just bought imac5.1 and needing os. which is the best for this model? only 2gb of ram

Just bought imac 5.1 2gb ram need os which is the best to run?

Here are the specs for your machine:
http://www.everymac.com/systems/apple/imac/specs/imac-core-2-duo-2.16-20-inch-sp ecs.html
I'd suggest purchasing a retail Snow leopard disk at the Apple store; it is a very stable system and will run well on 2 GB RAM.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard

After Effects reports only 2GB of RAM for Mac Pro AMD D700 GPU

Using After Effects CC 12.2 on Mac Pro 2013.
When I go to After Effects>Preferences>Previews>GPU Information the app reports that my system has an AMD D700 GPU for OpenGL. This is fine, however, it also states that the Total Memory is 2.00 GB, which is well below the 6GB of VRAM the GPU is supposed to have. Any ideas why this is happening?

I found an interesting post about enabling the GPU in CS6, the GPU Sniffer application embedded within Adobe Premiere CC reports the new Mac Pro video cards as:
--- OpenGL Info ---
Vendor: ATI Technologies Inc.
Renderer: AMD Radeon HD - FirePro D700 OpenGL Engine
OpenGL Version: 2.1 ATI-1.20.11
GLSL Version: 1.20
Monitors: 2
Monitor 0 properties -
   Size: (0, 0, 2560, 1440)
   Max texture size: 16384
   Supports non-power of two: 1
   Shaders 444: 1
   Shaders 422: 1
   Shaders 420: 1
Monitor 1 properties -
   Size: (2560, 0, 2560, 1440)
   Max texture size: 16384
   Supports non-power of two: 1
   Shaders 444: 1
   Shaders 422: 1
   Shaders 420: 1
--- GPU Computation Info ---
Found 2 devices supporting GPU computation.
OpenCL Device 0 -
   Name: AMD Radeon HD - FirePro D700 Compute Engine
   Vendor: AMD (Apple platform)
   Capability: 1.2
   Driver: 1.2
   Total Video Memory: 6144MB
OpenCL Device 1 -
   Name: AMD Radeon HD - FirePro D700 Compute Engine
   Vendor: AMD (Apple platform)
   Capability: 1.2
   Driver: 1.2
   Total Video Memory: 6144MB
Running the same GPU Sniffer application embedded in After Effects CC reports the video card specifications as:
Texture memory: 2047
Vendor string:    ATI Technologies Inc.
Renderer string: AMD Radeon HD - FirePro D700 OpenGL Engine
Version string:   2.1 ATI-1.20.11
OpenGL Version:   2.1
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
Has Shading Language support: TRUE
Started compilation of GLSL shaders
Successfully finished compilation of GLSL shaders
Ignoring SM4.0 check for cards on mac
Return code: 3
Is it a problem with the GPU Sniffer application?

Only 1 bar service while others have 4

Was wondering if anyone would know why I only have 1 bar while three other iphones at my house all the 3G have 4 bars?

What version of iOS is on each of the phones? V 4.0.1 changed the way bars were calculated. 4.0.1 and higher versions will show fewer bars for the same signal strength than earlier versions.
Do you have identical cases on all of the phones? Do you hold them differently? Are you using a Morphie Juice Pack on the one with fewer bars (it partially blocks the antenna).

SQL Subscription field shows * only with Dynamic Text Label in SQL query

We are using Hyperion Analyzer 7.2.x for showing budget and actual data. I have to show this financial data based on the security e.g. person in IT can see only IT dept. data. Hence I want to use dynamic text label <<userid>> for the security based on the person logging in to Analyzer.
But when I use dynamic text label <<userid>> in the SQL query in SQL Spreadsheet, SQL Subscription field shows * only selection option. Does anyone have idea how to solve this problem?
Thanks in advance for your help.
-SV

Hi
Okay i know this is a bit crazy way.....but i think this is the solution for your issue.
Create a report without the where clause (<<useris>>) then add a filter (sql subscription) then you can find all the values that are there in the SQL field (try to increase the query limit it is set to 250 as default) then edit the spreadsheet and add the where clause (<<userid>>).
This will help you having the filter and the dynamic text label. I think there is an issue when you try to filter it with a where clause.
Hope it helps.
CK

How do I get the weather widget to show only today in the notification center?

When I purchased my iPhone 4S, the notification center listed today's weather at my location. Several weeks ago it some how switched to showing the weekly forecast. What do I need to do to make the notification center show only today's weather? I have checked settings and can find nothing that controls this feature. My roommate bought his iPhone 4S at the same time I did, and his still shows only today's weather.
Thanks

I have the same problem!
I have today's summary on in notification center but get no weather info at all in the notification center. I have the location turned on for weather as well.
I have tried a reboot to no avail.

P67A-C45 hangs with Core i5-2300 and Win7 sees only 8 Gb RAM (of 16 total)

Hi guys, I have a problem.
My config is:
OS: Windows 7 Pro х64
MoBo: Socket1155 MSI "P67A-C45"
CPU: Intel "Core i5-2300"
Ram 4 dimms * 4Gb DDR3 SDRAM Kingston "ValueRAM" KVR1333D3N9/4G (PC10600, 1333МГц, CL9)
Video: PCI-E 1024МБ Sapphire "Radeon HD 5670" 11168-05 (Radeon HD 5670, DDR5, DVI, HDMI, DP)
Problem #1:
Windows shows only 8 Gb RAM in system properties. CPU-Z shows all 16 GB.
Problem #2:
Computer hangs several times per day (no blue screen, everithing just becomes frozen).
After flashing BIOS to 1,7 both problem disappeared for 2 days, but after todays hang both problems have returned.
No overclocking, Turbo boost disabled, EIST disabled, RAM voltage 1,5V.
Any ideas? Maybe new BIOS version?..

I have Carsair 650W PSU, it works fine (worked in my previous computer).
Also 3 SATA HDD installed (Segate 1 Tb and 2*Seagate 1,5 Tb).
I've raisen DIMM voltage to 1,65 V and system doesn't freeze anymore.
But windows still sees 8 GB memory (of 16 installed).
I think this is BIOS bug....

Yosemite only recognises 16gb RAM out of 32gb

Hi guys,
Until a month ago when I upgraded to Yosemite, Maverick recognised the 32gb RAM physically installed on my machine, after the upgrade to Yosemite (currently 10.10.1), the system ONLY recognises 16gb RAM.
I have a 27-inch mid 2010 iMac, 2.93 GHz Intel Core i7. All 4 slots are used, but the system should read 4 x 8 gb, but it only reads 4 x 4.
Already tried resetting the PRAM and SMC, but nothing.
Any clues, advice... something ?

Thanks for your reply and... I must say I feel like an idiot, worst like a moron.
After reading what you replied, I took a moment to think and I just realised I mistook the computers I have!!!! D'oh!
The one in my office is the old one with just 16gb and the one at home is the one with 32gb!
I know, I know, pure idiot... just coming back from a long vacation completely disconnected from technology and no matter how many times I saw the SYSTEM PROFILE I never realised it was the mid 2010 iMac.
Laugh all you want, mock me... I deserve it.
Thanks anyway!

Only 2GB RAM working in Windows 7 64-bit

Hi there,
We have a 2x 3.2Ghz Quad-Core Mac Pro with 12GB DDR2 800 PC2 6400 (iRAM IR4GMP800K), running Snow Leopard 10.6.4 and Boot Camp updated to 3.1. All 12GB of RAM show up just fine in Snow Leopard.
We just installed a new 1TB SATA drive, created a Boot Camp partition, and installed Windows 7 64-bit on it.
Installation went fine, and the OS seems to run okay. However, only 2GB are showing up in the System Properties. It does name the OS as Windows 7 64-bit.
We tried to install the 64-bit drivers in the Boot Camp / Drivers / Apple folder on the Snow Leopard DVD, but didn't seem to help.
Any ideas?

Yes, purchased it retail. This is exactly what we bought and the disc that was installed:
http://www.newegg.com/Product/Product.aspx?Item=N82E16832116758
I was thinking about the actual RAM too. When we installed the iRAM, we pulled the 4GB stock Apple RAM. I can try to put that back in tomorrow I suppose, and see what happens.
Also worth noting the ram is installed as such:
Board A: 4 x 2GB modules
Board B: 2 x 2GB modules
Do you think the slots we used might have something to do with it?

Photoshop CC 64 bits shows only 2GB of RAM while I have 4GB

Similar Messages

Maybe you are looking for