Photoshop CC could not be installed as it requires a compatible CC app

Hi all,
Since the upgrade to Photoshop CC2014 the old Photoshop and Bridge CC versions disappeared from my PC
which is running Windows 8.1.
Almost every time I sign in to Windows the following erromessage is showing up:
"Photoshop CC... could not be installed as it requires a compatible CC app. (error -411)"
I extensively searched the web but couldn't find any answer that could help me to sove this problem.
Because I use some extensions which do not work in CC 2014 I really need to use the older Photoshop CC version.
I really  would appreciate some help.
Thanks,
Jeu

I upgraded to the latest version of ps cc 2014 , problem resolved.
look like cs6 i outdated or something

Similar Messages

  • CS6 Master Collection installation say the following products could not be installed successfully? H

    After installing CS6 Master Suite I get the following message:
    Some item for the following products could not be installed successfully...and then it list every product except FB, FW, SG and PL. Ive installed and re-installed twice with the same result. In addition I cannot open .CR2 in Photoshop CS6. I know this is kind of a broad question but I think Ive done everything correctly
    Any advice?

    Thanks for commenting. My fundamental problem was that I was saving the download to the wrong place. Unfortunately there was no default option as to where to save it to-but after some trial and error and after saving the download to the Users folder everything is working perfectly and I'm happily enjoying CS6 master suite. I'm sure this is a common user error but due to the fact that I wasn't prompted with a default choice for saving the download I had some initial difficulties.
    Thanks again
    Ck
    Ps-I tried to find the download error report but once u close the download assistant it's a little hard to locate...
    Sent from my iPhone mini robot

  • LR4 Problem: The file could not be edited because Adobe Photoshop CS6 could not be launched.

    Is there a fix for this?  When I try to edit an image in Photoshop from Lightroom 4 (CTRL+E), Photoshop CS6 launches immediately but with no image.  In Lightroom 4, after about two minutes, the message box appears saying "The file could not be edited because Adobe Photoshop CS6 could not be launched."  When I click OK, the image promptly opens in Photoshop CS6 like normal.  This wan an itermittent issue for me after the LR4.1 release.  I was hoping that LR4.2 would help, but now I get the error every time.
    System
    Lightroom 4.2 x64
    Photoshop CS6 v13.0.1 x64
    Bridge 5.0.1.23 x64
    Windows 7 Pro x64
    AMD Six Core / 3.9 Ghz
    16 GB Memory
    NVidia Quadro 1 Gb Video
    Scratch space on three drives

    This may be a cooincidence, I starting having problems after I started using a Nikon D800, which has 36MP files.  LR4 released at the same time as the D800.  LR4 shows signs of struggling with the larger files, which are typically 280MB TIFFs for the D800, like freezing for several seconds when using an adjustment brush or going into a spasm with the crop tool.  Because Photoshop does not have similar large file issues, I'm doing more basic work in Photoshop, like cropping, dodge and burn, exposure adjustment, etc.
    Because Photoshop otherwise runs fine, and appears to read all the prefernes properly mid-issue, to get a better idea of what's going on, I turned on Process Monitor from Technet. For what it's worth, LR4 appears to touch the Photoshop preferences before it launches Photoshop.  LR4 must have a memory leak in that corrupts the Photoshop preferences file in a way that makes no difference to Photoshop.
    My weekend project is to try Capture One to see if I can spend more time on photography and less troubleshooting Adobe problems.  As it stands, LR4 is not usable for me.

  • Lightroom 5.6 Error: The file could not be edited because Photoshop CC could not be launched...

    I upgraded to lightroom 5.6 recently and i am using photoshop cs 6.
    My OS is windows 8 on i5 4670 with R280X gfx card 16gb ram
    After editing a photo with lightroom , when I right click to edit in photoshop, immediately photoshop launch but the image isnt imported to photoshop.
    After like 30sec  an error message pop out saying "The file could not be edited because Photoshop CC could not be launched".
    After another 10sec then the photo appear in photoshop... this is getting irritating to me.
    if i select to just open the original or a copy of the original it works fine. It only happens when I try to open it with lightroom changes.
    I had uninstall/reinstall both photoshop and lightroom as well as remove all the plugins i had, but the problem doesnt go away.
    Another issue with lightroom 5.6 is the the adjustment brush is slow and sluggish, it is so unusable when I zoom in to use the adjustment brush.
    I didnt had that issue before i upgraded. OMG
    anyone have solution to my problem ?

    I upgraded to the latest version of ps cc 2014 , problem resolved.
    look like cs6 i outdated or something

  • When I click on Firefox it opens with a box that says "Foxfire is installing your updates and will start in a few moments-. " then it says "Software Update Failed (in blue) with an exclamation mark inside a yellow triangle) The update could not be install

    When I click on Firefox the first time it says "Foxfire is installing your updates and will start in a few moments…. (with a green bar)" then it says "Software Update Failed (in blue) with an exclamation mark inside a yellow triangle)
    The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." When I click the ok, Firefox opens up. If I open another Firefox window with the previous one still running, it doesn't give me any of these messages, it just opens normally.
    == This happened ==
    Every time Firefox opened

    If you can't install on top of the current installation then you need to delete or rename the current Firefox program folder to do a clean install.
    It is possible that your security software is using or locking files, so you can try to temporarily disable that software during the installation.

  • An update tries to run, but an error message stating "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." I can't open Firefox

    I click on Firefox and it says that Firefox is installing your updates and will start in a few minutes. Then I get "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." this cycle never ends. Do I need to deinstall Firefox and re-install? If I do that, do i lose all of my bookmarks, etc?

    See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Remove the files in the updates and updates\0 folder:
    *C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
    *(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates)
    *C:\Program Files\Mozilla Firefox\updates
    *Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    *Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer. Do not remove personal data when uninstalling.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • SCCM 2012 - sms_notificaiton_server install fails, bgbisapi.msi could not be installed

    Hi,
    installed a SCCM 2012 R2 Primary site on a 2012 R2 server on the D: drive. Everything seemed to go well, however i am am now encountering issues with the SMS_NOTIFICATION_SERVER in that the site component manager is unable to install it. The status message
    viewer informs me that, "Site Component Manager failed to install this component, because the Microsoft Installer File for this component (bgbisapi.msi) could not install."
    When i check the Bgbsetup.log, i see the following lines: 
    <01/19/15 14:46:27> CTool::RegisterComPlusService: Failed to unregister D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
    <01/19/15 14:46:27> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /extlb /tlb:"D:\Program Files\SMS_CCM\microsoft.configurationmanager.bgbserverchannel.tlb" "D:\Program
    Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
    <01/19/15 14:46:30> CTool::RegisterComPlusService: Failed to register D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
    <01/19/15 14:46:30> Cannot register BGB server channel DLL D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll. Installation cannot continue.
    <01/19/15 14:46:30> Fatal MSI Error - bgbisapi.msi could not be installed.
    Having done a bit of reading, it seems a few other people have come accross this issue before:
    https://rikkoss.wordpress.com/2013/12/11/tip-do-not-change-the-default-installation-location-for-configmgr-2012/
    http://www.windows-noob.com/forums/index.php?/topic/7401-sms-notification-server-failed-critical-sccm-sp1-sql-2012-sp1/
    The solution for these folks seems to be to edit 2 files in the .Net folder,InstallUtil.exe.config and Regsvc.exe.config,
    and insert the following code:
    <runtime>
    <loadFromRemoteSources enabled=”true”/>
    </runtime>
    However, this hasn't worked for me and i'm still getting stuck with the same error messages. Since i'd really like to avoid reinstalling SCCM on the C: drive, can anyone suggest any possible solutions to this issue? 

    The MPsetup.log has this:
    <01/20/15 16:28:11>         ======== Completed Installation of Pre Reqs for Role SMSMP ========
    <01/20/15 16:28:11> Installing the SMSMP
    <01/20/15 16:28:11> Passed OS version check.
    <01/20/15 16:28:11> IIS Service is installed.
    <01/20/15 16:28:11> No versions of SMSMP are installed.  Installing new SMSMP.
    <01/20/15 16:28:11> Enabling MSI logging.  mp.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
    <01/20/15 16:28:11> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80
    USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
    <01/20/15 16:28:12> mp.msi exited with return code: 1603
    <01/20/15 16:28:12> Backing up D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
    <01/20/15 16:28:12> Fatal MSI Error - mp.msi could not be installed.
    and the MPmsi.log has this:
    MSI (s) (B0:E0) [16:37:14:660]: Invoking remote custom action. DLL: C:\WINDOWS\Installer\MSI23F6.tmp, Entrypoint: CcmRegisterPerfCounters
    [16:37:14] @@ERR:25001
    Internal Error 25001. 80070057
    MSI (s) (B0!F8) [16:37:14:676]: Product: BGB http proxy -- Internal Error 25001. 80070057
    CustomAction CcmRegisterPerfCounters returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    Had a go at removing the MP, disabled the UAC and reinstalling the MP. Same result unfortunately...The server is temporarily housed in a block GPO OU so group policy shouldn't be an issue. Thanks for all the help so far!

  • Im trying to install iTunes on my friend's Dell XPS, running windows vista ultimate (32-bit), but whenever I reach the end of the install, it pops up with an error telling me:   "Service 'Apple Mobile Device' (Apple Mobile Device) could not be instal

    Trying to install iTunes on my Laptop, running windows 7 (64-bit), but whenever I reach the end of the install, it pops up with an error telling me:
    "Service 'Apple Mobile Device' (Apple Mobile Device) could not be installed. Verify that you have sufficient privileges to install system services"

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • I keep getting the error "zotero could not be installed because firefox cannot modify the needed file". Any suggestions on how to fix this?

    After downloading Zotero (a plug in that is in theory custom-designed for firefox), I get an error message that says "zotero could not be installed because firefox could not modify the needed file". That's all the detail I have.

    You get this error if you install an extension that needs to be unpacked in order to work properly, but this isn't happening. The default is to copy the file to the extensions folder and rename the file part to the ID of the extension.
    *https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking
    You can try to set the extensions.alwaysUnpack pref(s) on the <b>about:config</b> page to true.
    It is possible that there is a problem with the file(s) that store the extensions registry.
    Delete the extensions.* files (e.g. extensions.sqlite, extensions.ini) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
    *https://support.mozilla.org/kb/Profiles
    New files will be created when required.
    See "Corrupt extension files":
    *http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    *https://support.mozilla.org/kb/Unable+to+install+add-ons
    If you see disabled or not compatible extensions in "Firefox/Tools > Add-ons > Extensions" then click the Tools button at the left end side of the Search Bar to check if there is a compatibility update available.
    If this hasn't helped then also delete the addons.sqlite file if present.

  • Why can't I download the add-on for tv-fox I got the following when I tried: TV-Fox could not be installed because it is not compatible with Firefox 6.0.2

    I installed FireFox so I could take advantage of the TV-Fox add-on which is supposed to provide free television, so I can cancel my cable. But, as stated above, I got the following when I tried:
    TV-Fox could not be installed because it is not
    compatible with Firefox 6.0.2. I read in reviews that it apparently worked with Firefox 6.0.1. Can you help me get this add-on?

    Duplicate. An answer has been posted here --> https://support.mozilla.com/en-US/questions/879520
    Moderator: Please LOCK '''''this''''' thread.

  • Error: "FT DeepDark 11.3.1 could not be installed because Firefox cannot modify the needed file." What does this mean?

    In an earlier version (Firefox v.31) on this, and (presently) on two other PC's, I was/am able to run add-on FT DeepDark 11.3.1 without any problems. It was only recently - after updating to v.32.0.3 on this PC that this situation started. The PC in question is a Dell Dimension 8400 Intel P4 running Windows 7, though I'm thinking it may have something to do with the newer version of Firefox. Could anyone help me with this? I like this add-on because it is easier in my eyes when browsing the internet. Thanks
    PS: Attempted to install the troubleshooter, and again I received a similar error: "Troubleshooter could not be installed because Firefox cannot modify the needed file."

    This error has been reported before in this bug:
    https://bugzilla.mozilla.org/show_bug.cgi?id=730040#c21
    Please read that bug I linked you to and let me know if the last comment in the bug solves your problem. Apparently the problem is about the addon .xpi file being read-only. Try right-clicking it, going to Properties and unchecking the "Read-only" attribute box at the bottom of the dialog. Click Apply, then OK.

  • How do I install lightning1.0b1, I keep getting the message-could not be installed because it is not compatible with Firefox 3.6.10

    I am trying to install lightning 1.0b1, I keep getting the message - lightning 1.0b1 could not be installed because it is not compatible with Firefox 3.6.10

    The Lightning add-on is for Thunderbird and will not work on Firefox.
    If you are trying to install it in Thunderbird see http://kb.mozillazine.org/Extensions_-_Thunderbird

  • Windows Deployment Services - Windows 8.1 Deployment Failure (Required Driver could not be Installed)

    Hello everyone,
    Give you a little background on the hardware/software which we are running to do a Windows 8.1 Deployment, we have an VM of Windows Server 2008 R2 with Windows Deployment Services installed and configured correctly. For the boot image it's a Windows 8.1
    WIM and as for the Install Image we have a base image of Win 8.1 with all drivers installed for an HP EliteBook 8540w , we Syspreped and then capture the image using the W2K capture on PXE to capture and upload the image to the server. This is where we first
    ran into the problem of connecting to the server and had to inject the lan drivers to have network connectivity. After the image was uploaded to the server, we thought to try and run a deployment of that image on an identical laptop. PXE boot into that Image,
    it asks for domain credentials which are accepted it begins the installation process and fails at "Windows installation cannot continue because a required driver could not be installed"?
    We just set up client logging on the server and it is useless it just says that the driver is missing, but what driver is missing? There are thousands, which one?
    Another forum has this issue:  http://social.technet.microsoft.com/Forums/windows/en-US/4cf0b378-09d0-4e0b-bc6e-3d898b668f98/during-deployment-windows-installation-cannot-continue-because-a-required-driver-could-not-be?forum=w8itproinstall

    Hi,
    Please first check the solution here:
    Error: Windows installation cannot continue because a required driver could not be installed
    http://support.brainwaregroup.com/kb/article/AA-00702/0/Error%3A-Windows-installation-cannot-continue-because-a-required-driver-could-not-be-installed.html
    Also, please try to find out Setup logs from the client computer, and we can see the details in the Setup log:
    If the failure occurs in Windows PE before the disk configuration page of the WDS client is completed, you can find the logs at the
    X:\Windows\Panther folder. Use Shift+F10 to open a command prompt, and then change the directory to the location.
    If the failure occurs in Windows PE after the disk configuration page of the WDS client is completed, you can find the logs on the local disk volume at the
    $Windows.~BT\Sources\Panther folder. The local disk volume is usually the drive
    C. Use Shift+F10 to open a command prompt, and then change the directory to the location.
    Kate Li
    TechNet Community Support

  • I was just told ML could not be installed because apple HD is broken and could not be repaired. I never had any problem ever to suggest a broken HD, on my 2 yr. old mac pro. 10.6.8. Any one else having this problem? Will I get a refund,  if so how?

    I have a 2009 MAC PRO 10.6.8. Had never had any problems. Tried installing Mountain Lion today. Was told, " Mountain Lion could not be installed because Hard Disk is broken"!
    Is it because HD is broken or perhaps incompatible? Has any one else had this problem? I had no symptoms suggestive of a broken HD. Will I get reimbursed if ML could not be installed? If so what do I have to do?
    How can I verify the status of the HD, in absence of symptoms for my own information?

    mottoo wrote:
    I have a 2009 MAC PRO 10.6.8. Had never had any problems. Tried installing Mountain Lion today. Was told, " Mountain Lion could not be installed because Hard Disk is broken"!
    Is it because HD is broken or perhaps incompatible? Has any one else had this problem? I had no symptoms suggestive of a broken HD. Will I get reimbursed if ML could not be installed? If so what do I have to do?
    How can I verify the status of the HD, in absence of symptoms for my own information?
    The solution to your problem is rather simple
    1: Get a external hard drive and use Disk Utility to format it with a GUID partition map and OS X extended Journaled.
    2: Export your browser bookmarks and any other needed data to a file,. Copy your User data folders of Music, Pictures etc over to the external  drive via drag and drop copy methods, disconnect the drive.
    I don't advise using TimeMachine at this point since your boot drive is messed up, thus so will be your TM drive, just transfering the problem later on back to the new install. We are proceeding with a "Fresh install" method to eliminate as many issues as possible which a TM restore can return to a new OS X install.
    3: Next you will need to follow these instructions to zero erase (important) and install 10.6 fresh, use the same named account (different password ok)
    How to erase and install Snow Leopard 10.6
    4: Before you return files or install programs, Software Update fully and use the AppStore to install 10.8, this way it will be on a fresh 10.6 install, free of issues.
    5: Install any and all 10.8 compatible programs as much as possible before returning your User files, this is a performance measure.
    If you need too, use this site to find one's that are 10.8 compatible.
    http://roaringapps.com/apps:table
    6: Last install your user files from the external drive backup into their respective Music, Pictures, Movies etc., folders, into the same named accounts so you preserve your iTunes playlists. When you open those programs, they will update their respective support files automatically.

  • Tried to install OS X and it says OS X could not be installed.  File system or resist failed. Quit installer to restart and try again.  It keeps me I a circle. How can I truly quit the install and go back to where I was. My time machine not working

    i am in a loop.  I can't get past this point  OS X could not be installed on your computer.  when I go to quit the installer I get are you sure you want to quit OS X  installer?  To quit, click choose startup disk to select a startup diskbfor your computer if you need to restart click restart.  I don't have a start up disk and my time machine evidently isn't workig either.  Does this mean I have lost everything???  Please someone help!!!  I am not a tech person at all and am freaking out right now.  How do I remove the download and just go back to what I had.  Seriously!!! 

    Not sure what the iOS is.
    iOS cannot run on any Mac computer, just Apple's mobile devices. You have some version of Mac OS X. To find it, please do "About this Mac" from your Apple menu and post what you find along wiuth the processor description.
    Some iMacs cannot run newer versions of the Mac OX. That's why we need more info about your specific model. Now that you have the serial number, enter it into the Apple support page to get it translated into a model type:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    Report what that says for your model BUT DO NOT post your serial number for security reasons.

Maybe you are looking for