Photoshop cc crashes all the time. I can use it for 1 min at the time.

I cant use my photoshop because it is chrashing all the time. I tryed to reinstalled the product but with no luck. It behaves the same. After open PSD it works fine in maximum 1 min. Then it crashes.
Please help =)

Please read these and proceed accordingly (maybe start with restoring Preferences):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

Similar Messages

  • The external GPS is used only for 911 but the device will not op without it...this causes great inconvenience for me, having to run that cable to a window in the trwo houses I use it..ids there a way to disable the GPS if I do not care about the 911 funct

    the external GPS is used only for 911 but the device will not operate without it...this causes great inconvenience for me, having to run that cable to a window in the two houses I use it..is there a way to disable the GPS if I do not care about the 911 functionability..?  this is the only downside I have with the network extender and it renders my device useless..

    Nope, GPS is a Federal requirement for anything operating a cellular telephone signal.  You don't ever plan to call 911 until you are in an emergency.  I don't see that requirement changing any time soon.
    If you are truly inconvenienced by the VZW network extender then perhaps you should disable you calling features in these areas and swap over to WiFi only.  There are many services and apps out there that can route your phone services through internet service providers. 

  • Photoshop CS6 crashes all the time and especially when using the type tool... please help!

    Photoshop CS6 crashes all the time and especially when using the type tool... please help!

    Since I did not have this problem with CS5 or CS4, I can only assume something is not right with Photoshop CS6... below is my video card info:
    ATI Radeon HD 4850:
      Chipset Model:          ATI Radeon HD 4850
      Type:          GPU
      Bus:          PCIe
      PCIe Lane Width:          x16
      VRAM (Total):          512 MB
      Vendor:          ATI (0x1002)
      Device ID:          0x944a
      Revision ID:          0x0000
      ROM Revision:          113-B9110C-425
      EFI Driver Version:          01.00.383
      Displays:
    iMac:
      Resolution:          2560 x 1440
      Pixel Depth:          32-Bit Color (ARGB8888)
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Built-In:          Yes
      Connection Type:          DisplayPort
    Cinema HD:
      Resolution:          1920 x 1200
      Pixel Depth:          32-Bit Color (ARGB8888)
      Display Serial Number:          2A80273WXMN
      Mirror:          Off
      Online:          Yes
      Rotation:          Supported

  • I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS  without formatting it so that I can use it for Time Machine and the like?

    I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS  without formatting it so that I can use it for Time Machine and the like?

    There aren't any 3rd party apps or anything. I use PC's and Mac's at school and the only computer connected to a printer at my house is a PC so i need access to both

  • 4 albums purchased from iTunes yesterday have songs not playing all the way through. They play for a period of time and skip to the next song. Everytime they are played. Can anyone help?

    Some songs I purchased last night are not playing all the way through. Several songs from the 4 albums I purchased play for a period of time then just skip to the next song. The songs that do this, do it everytime they are played at the exact same spot. The songs that are affected skip to the next on iTunes on my PC which is updated to the most current iTunes and my 160gb iPod classic. Everytime they are played at the exact same spot. However on my other device, iPhone 4s all songs play just fine. I have almost 7,000 songs on my iPod and this has never happened before and I have played it awhile since downloading those albums yesterday. This is only happening with the albums purchased yesterday. Can anyone help me figure out what is wrong?

    I'm having the same issue with a few songs I just downloaded. It skips randomly in the middle of the song.

  • I have accidentally deleted off my Mac a preferences file for Adobe photoshop and now the program cannot initialize. I have talked to Apple and then say that if Adobe can isolate the file they can help me restore it from my time machine. How do I isolate

    I have accidentally deleted off my Mac a preferences file for Adobe photoshop and now the program cannot initialize. I have talked to Apple and then say that if Adobe can isolate the file they can help me restore it from my time machine. How do I isolate the file ?

    Do you have the path to this file and name of this file?

  • I have an IMAC and I'm running OSX 10.9.2.  I'd like to store my Aperture /IMovie Libraries to an external hard drive.  In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the externa

    I have an IMAC and I'm running OSX 10.9.2.  I'd like to store my Aperture /IMovie Libraries on an external hard drive.  In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.  Is this possible? Can I set up a RAID 5 format for redundancy?

    I'd like to store my Aperture /IMovie Libraries on an external hard drive.
    That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
    In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
    Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
    You must have backups on a different disk .. otherwise it is pointless.
    Can I set up a RAID 5 format for redundancy?
    No.. you can buy special USB and Thunderbolt external drives that support RAID..
    BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
    Raid will corrupt all copies of the files.. it is replicated across all disks.
    Delete a photo it is deleted across all disks.. you have no recovery.
    Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.

  • I'm recording video on JVC HD camera.Every 13:54 it starts a new file.I have one file that won't play.I get this message:Quick time player can't open (names file) because the movie's file format isn't recognized.  Only happens this one file.Ideas?

    I can't open one Quick Time movie file.  It says: Quick time player can't open (names file) because the movie's file format isn't recognized.  Only happens on this one file.  All the others of a two hour shoot are fine. 
    Any ideas what's happened and is there some way to open that file and retrieve what's on it? 

    Thanks this was useful. I have been ripping my audiobooks and I was finding that they would get uploaded to iCloud in the process, which in itself was fine, but then iTunes would not let me change the media type to Audiobook, which is annoying as it effects how iTunes treats the media. Like showing you the skip back 10 seconds button.
    The general outline here helped me work around the issue and change the media type before the media was re-uploaded to iCloud.
    Sean

  • Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possi

    Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possible?  Thanks

    Yes. Yes. Yes.
    Mylenium

  • I upgraded from 4S to Iphone 5 but i lost all my messages how can i get them back on the new device ?i did back up using the icloud ?

    i upgraded from 4S to Iphone 5 but i lost all my messages how can i get them back on the new device ?i did back up using the icloud ?
    having said that i have an i pad as well and when i backed up i got the contacts which are on the i pad on my new iphone 5 not the ones who were on
    i phone 4s ...
    any one can advise me please what to do to get my stuff from iphone 4s to iphone 5 ,rather than the stuff from my ipad ?

    If you made a backup using icloud, then restore your 5 to that backup.  http://support.apple.com/kb/HT4859

  • The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail. Help?

    The last few times I've used headphones in my iPad, the audio has been all messed up to the extent where it's better to just use the internal speakers and not the headphones. I've tried multiple pairs of headphones to no avail.
    The iPad was bought in mid-June, but I did not get extended Apple-Care warranty on it. Any idea of what's happenening?

    Multiple means how many? If only 2 or 3, they could all be faulty. Try the headphones in some other device, to make sure they are OK. Or there could be something wrong with the headphone port.
    Your iPad is still covered by the 1-year warranty so you should make a Genius appointment and have it looked at.
    Another thing to try is to plug in the headphone jack a few times in succession to see if it frees up something inside the port.

  • What is the maximum paper thickness a C6380 all in one printer can use?

    What is the maximum paper thickness a C6380 all in one printer can use? I want to print wedding invitations

    HI,
    Paper thickniss it will print depends on the paper size as well. FInd the paper specs HERE.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • I am looking for R.A.Salvatore's latest book, "The Companion" but can not find it.  Does the Apple bookstore NOT carry all the new releases?

    I just want to know why some books are not carried by the iBooks store?  I wanted to buy the latest R.A. Salvatore book, "The Companion" but could not find it at the store.  This is the second time I wanted to buy a book that the store did not carry.  I just wonder why?  And is there a way I can use, "Nook for IPad" to get the books I want?

    Apple can only sell in a particular country what the book publishers grant them licenses to sell - if the publisher of that book hasn't done so, then Apple can't sell it.
    Depending upon what country that are in, and therefore what apps and stores that you have access to (most ebooks have DRM which tie them to the store's own app), then you could try Amazon/Kindle, Nook, or Kobo etc and see if they have it

  • I upgraded my iPod Touch 4th Gen yesterday.  Now it won't play music, which is the main thing I use it for.  Over 11,000 songs [it's a 64GB model] -- will I actually have to restore the device and re-add all that music?

    I upgraded my iPod Touch 4th Gen yesterday.  Now it won't play music, which is the main thing I use it for.  Over 11,000 songs [it's a 64GB model] -- will I actually have to restore the device and re-add all that music?
    [Music files are still there, and I can play them on my computer directly from the iPod [just one track at a time] but not in the usual way, through headphones.]
    On the Summary page of iTunes for the iPod, it shows 50-plus gigabytes of "Other" content and no music, which was not previously the case.  I assume this is related to the problem.
    I can bring up individual tracks on the iPod and see cover art, but cannot play the music.

    iCloud is free, iTunes match is $25 a year.
    I had the same problem and when I went to Settings I had 0 songs, even though they were obviously still there since I only had 15GB free on my 64GB device.
    I decided to do a complete reset/restore of my 4th gen iPod Touch, Bad move! I've been messing with it for hours, and it simply won't restore--it keeps hanging on a black screen with an Apple logo and a progress bar at about 10%, sometimes it goes completely blank and tries again, with the same result. (I've posted my question/plea for help here: https://discussions.apple.com/message/19735862 )
    I'm ready to bang my head against the wall! I can put the device in recovery mode, connect to iTunes on my computer, and get it back to the setup screen, but when I go through the process again and try to do an iCloud backup I get the same reset/restore loop.
    I could start from scratch, but I really, really, really don't want to go through all of my hundreds of apps, reinstall them one by one, etc. etc. etc.
    I thought that once I started using iCloud, I didn't need to sync with iTunes anymore--guess I was wrong.

  • TS4006 My iphone & ipad mini are both here w/ me at my home. But the findme app is showing my ipad mini on the other side of town, how can i get that corrected?

    My iphone & ipad mini are both here w/ me at my home. But the findme app is showing my ipad mini on the other side of town, how can i get that corrected?

    Hello Krazyboutgolf,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS 7: Understanding Location Services
    http://support.apple.com/kb/HT5594
    Improving GPS accuracy2,4
    GPS accuracy varies depending on the number of visible GPS satellites. Locating all visible satellites can take several minutes, with accuracy gradually increasing over time. Use these tips to improve GPS accuracy:
    Ensure the date, time, and time zone are correctly set on the device in Settings > General > Date & Time. If possible, use Set Automatically.
    Important: Incorrect settings on your computer can sync to your device. Verify the date, time, and time zone on any computer that syncs with your device.
    Restart your device.
    Verify that you have a cellular or Wi-Fi network connection. This allows the Assisted GPS (A-GPS) on the device to locate visible GPS satellites faster, in addition to providing initial location information using the Wi-Fi or cellular networks.
    Note: Microcells (sometimes called Femtocells) aren't supported with Location Services.
    Maintain a clear view of the horizon in several directions. Keep in mind that walls, vehicle roofs, tall buildings, mountains, and other obstructions can block line of sight to GPS satellites. When this occurs, your device will automatically use Wi-Fi or cellular networks to determine your position until the GPS satellites are visible again.
    Best of luck,
    Mario

  • Photoshop cs6 crashes with "appcrash - module ig75icd64.dll; no problem for a local admin user however. i've tried giving specified user full access to photoshop.exe and set it to Win XP compatibility. how do i fix this without giving user local admin acc

    photoshop cs6 crashes with "appcrash - module ig75icd64.dll; no problem for a local admin user however. i've tried giving specified user full access to photoshop.exe and set it to Win XP compatibility. how do i fix this without giving user local admin access?

    Danny,
    Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
    That field is not for attempting to fit your entire question in there.
    Please keep this in mind next time you post.  Thank you.

Maybe you are looking for

  • Creating a LOV by using a Command Object

    Hello All, I have a report that's driven by a parameterized sproc, which is a year parameter.  However, we have a table that I would like to use in my object command to populate this parameter with the values from the select statement to enforce cons

  • Getting error message when I sign in onto my computer on SyncNotifier.exe

    When I log onto my computer I get a box that automatically pops up with a "SyncNotifier.exe Unable To Locate Component" error. It states, "This application has failed to start because CoreFoundation.dll was not found. Re-installing the application ma

  • ME 808: System error: error during update Table EKAB

    Hi, Couple of years ago, during carve out, one of the contracts was deleted. A PO created against that contract carries some open quantities. Now our purchasing wants to close this PO, either by changing the quantity to delivered quantity (delivered

  • Ugly fonts in some webpages

    Hi there, First of all, hi. I used Arch some time ago but never registered in these forums. Then I moved to Slackware, got tired of no automatic pkg dependency and came back to Arch. Home, sweet home. Once I got my fresh installation (plus X and my W

  • Improving Performance of Dynamic SQL in Pro*C

    I am using Dynamic sql format 3 in pro*C, i.e prepare sqlstmt from :sql_stmt declare cursor c1 for sqlstmt But the query is slow .I am also using order by with ltrim(rtrim(colname)) & sometimes group by . can anyone tell how to improve performance of