Photoshop CC doesn't play Curve point changes back in recorded Actions (Mac)

I've just 'upgraded' to CC, and noticed that actions that alter Curves adjustment layers do not play back correctly.
The Action itself contains the correct steps ... here's an example ...
... but it refuses to play this type of step in any Action, giving me the default, flat curve, thus ...
I've an extensive set of Actions of this type for photo-processing: I take it that these are now pretty useless in PSD CC?
Anyone have Action-related issues, too?

Hey ... that's good though: I can just submit a bug report.
Oh ... wait ... no I can't. Tried via this site, but that just leads to the photoshop.com site, and that's not accepting logins from new users.
I tried Live Chat ... but was just told that I'd have to phone them (no email for bugs). I would, but my manager has already spent about an hour on the phone to Adobe today ... and 90% of that was hold music.
Looks like we'll just have to wait for our new, super-fast-update-schedule Creative Cloud to come to the rescue!

Similar Messages

5G iPod doesn't play sound

I have a 5G 30GB iPod that just today stopped playing and sound. It still lets you scroll through the menus and also shows its playing a song, but you cannot hear anything. It won't play sound through the headphone jack, and I also have an Alpine CD Player with the iPod direct connect cable, and that does not work as well. I reset the iPod today and that did not do anything, and I also tried restoring it and that did not fix the problem as well. I contacted Apple support and found out it would cost $130 to fix my iPod, but the lady I talked to could not tell me what is exactly wrong with the iPod because she had never heard of this problem before. I'm basically looking to hopefully fix it myself since I dont want to shell out $130 to repair it, but probably will give in if I cannot fix this myself.

mine does the same thing...i got it replaced once under warranty and they gave me a "new" one which began to malfunction 3 months after i got it :\ It plays the music all staticy and when i took it in they told me nothing was wrong with it...but it doesn't play and ive changed the head phones and reset it and run all the diagnostic tests...needless to say im very dissappointed with apple right now! what makes it worse is when i took it in the ipod wasn't even registered to me which means they gave me someone else's ipod which had been replaced! but since it was out of warranty when i found out it was 140 to get a new one if they found something wrong with it. so idk but this is my 2nd 5G ipod and i think its a bug that is in all of them.

My customized genres get changed back to the iTunes default genre

I customize my genres, I find the genres provided by iTunes to be insufficiently accurate. Every time I buy new music from iTunes - or download previously purchased content - my genres are set back to the original iTunes genre.
When I play a track with a changed-back genre it once again reverts to the genre I assigned it. But I am now into thousands of tracks that have customized genres, so I've begun avoiding iTunes and buying from Amazon simply to avoid contact between my iTunes application and the iTunes store, so that it doesn't set back my customized genres.
Not sure that was clear: Example:
I bought Lou Reed's "Hudson Wind Meditations" in the iTunes store, and I download it to my iTunes software so I can sync with my iPod and iPhone. The genre it is assigned by iTunes is "World." I consider this the default genre.
I don't consider it "World" music, and want to find it along with my other Lou Reed tracks when sorting by genre, so I change the genre to "Rock - Avantgarde - NY". I have a number of customized genres.
The next time I buy and/or download anything from the iTunes store, all my customized genres are reset to what to the default genres the tracks had upon purchase. - This is highly frustrating, because I have given thousands of tracks customized genres. So after downloading something from the iTunes store, my Lou Reed "Hudson Wind Meditation" shows the genre as the default genre again, in this case it says "World" again.
Oddly enough, if I play a track that had a custom custom genre but that was changed back after contact with the iTunes store, it reverts back to the customized genre. So if I play the Lou Reed track again, it changes back to my customized genre as soon as I hit play (it would change back to "Rock - Avantgarde - NY".
It isn't a tenable solution to hit play on every track after every new download. Nor is going back in and re-customizing every album in a bulk move.
Can I lock genres? Help please.
iTunes 11.2.2 running on 10.9.4, but it's been doing this for several iterations.

Go to iTunes > Preferences > Store and turn off
Show iTunes in the Cloud purchases
Share details about your library with Apple
On any iOS device go to Settings > Music and turn off
Show All Music
Close and reopen iTunes and/or reset the device and you should see your version of the metadata for each track rather than the original store data.
(Not sure if this also works if iTunes match is in use since I don't use it.)
tt2

Audio from Power Point show doesn't play

I am having a problem with Power Point shows that people send to me via e-mail. The video works fine, but the audio doesn't play. Can anyone help me with this? Thanks.

Hello Andaleeb,
thank you for getting back to me.
The slide show works fine, including sound, from within Organizer. It
also works fine when I export it as a video. Just PDF isn't working.
In the meantime, from various contributions in the forum, I gather that,
unfortunately, the Organizer (just like Lightroom) simply does not
support adding music to PDF slide shows. Apparently, there is a way to
do that using Acrobat Pro (only costs 640 Euros).
You may consider my question answered.
Regards,
Thomas
Am 21.12.2012 11:02, schrieb andaleebfatima1:
>
Re: Audio in PDF slide show doesn't play. What can I do ?
created by andaleebfatima1
<http://forums.adobe.com/people/andaleebfatima1> in /Photoshop
Elements/ - View the full discussion
<http://forums.adobe.com/message/4938671#4938671

TS4223 After changing the quality from HD to Standard the film doesn't play

I recently purchased The Dark Knight Rises on the Itunes store and soon after changed the quality of the film, but since doing so the film doesn't play and the artwork doesn't show up either but the extras work?, Does anyone know a solution for this?

How did you "change the quality?"

PhotoShop CC will not play Layer Adjustment Actions Correctly

My computer has PhotoShop CC installed on a brand new Dell Windows 7 computer. Previously I used CS4 and it worked great, but now I'm having issues with CC playing back any Action that has layer adjusments. I'll record an action consisting of an edited layer adjustment such as curves, levels, brightness/conrast, etc., and then when I play it back the layer adjustment applied is the default 0. For instance, here I clicked "Create New Action" and labeled it "Curves Layer TEST":
add a new curves layer adjustment and label it "Brighten":
Then I add a few points to the curve (overly brightened to demonstrate my issue):
then I hit the Stop Recording button. But when I look at the curve values in the Actions box of the very curve layer I just recorded, it says the Preset Kind is Default. Why doesn't it say Custom??? The Properties box read "Custom" as I was editing the curve!
So anyway, I open up my nexy photo and play the Brighten action I just created...
and nothing happens to the image. Oh, it now has a curves layer on top, but it's the Default straight line. What happened to the curve I edited and recorded!!??
What's the deal? This is the same process I used in CS4, CS2 and every other PhotoShop incarnation and it worked fine, until CC. Is this a bug? Or is there a new process to creating layer adjustment actions???

Adobe added the adjustment panel in CS4. Adobe also changed how the action recorded records adding adjustment layers in CS4. Before the Adjustment panel when you clicked on one of the add adjustment layer icons Photoshop would open the adjustment type options dialog window which you would set and commit. When you committed the settings the action recorder would record a single step that added the adjustment layer with the setting you set. After Adobe added the adjustment panel the action recorder records a step Make adjustment layer Adjustment type preset default as soon as you click on the adjustmet type icon. If you then make changes to the settings when you move onto the next Photoshop operation the action recorder records a second step Set current adjustment layer to type preset kind custom and settings. Adobe also introduced many problems with the adjustment panel. The two step recoding can be a problem because it possible to add steps between the two steps and the step set current adjustment layer will fail if the targeted layer was changed by the addition. The adjustment panel also has two options in its fly-out menu the change Photoshop operation. They can break new and old actions that add adjustment layers. For how adjustment layers will get added may not be the way they were added when the action was recorded. These options work more like global Photoshop Preferences actions have no control over. However the options do not alway work like set. So if you try real hard you can record actions that add adjustment layers that will alway work the way you designed your action to work. Adobe does not want to fix these problems. I tried to get Adobe to fix these bugs for years. I have now given up.

IDVD problem burning and multiplexing - gets stuck but ejects the DVD and the DVD doesn't play

I am having trouble burning DVDs. Everything seems to be working fine during the iDVD project creation. I can watch the movie and select scenes within iDVD. Then, when I go to burn the DVD, it gets stuck at the burning/multiplexing stage - the wheel just keeps spinning and says there is about a minute left. Yet it ejects the DVD and the DVD won't play when inserted into a DVD player. It will show the intro and the scene selection pages but when you click on one of the scenes, it gets stuck and doesn't play. I have already uninstalled and reinstalled iDVD. The problem persists. It seems like the burner itself is the problem. What can I do to fix it? I have Mac OS X Version 10.6.8 with a 2.8 GHzintel Core 2 Duo and iDVD version 7.0.4.

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

Photoshop-saved GIFs not playing on iOS

Hi,
I have spent quite some time looking for a solution to my extremely infuriating issue with GIF and Photoshop, and I really hope someone might help me with it on this forum.
For example right now I have a file of 27 frames that is of course looped on 'forever'.
When in the 'Save for Web' settings window I apply them really humbly:
image size 1000x667px
4 colours
'interlace', 'transparency' and 'convert to sRGB' are unticked
no dithering, matte: none.
MacOS preview option (space), Preview app and the browsers like Chrome and Safari (cannot say about the rest) allow the file to be playing forever, although sometimes I have to reload the page in Safari to make it work.
What really bothers me in this situation is that absolutely all the GIF animations I'm trying to create with my Photoshop software are never playing on iOS and Android devices no matter if I revise the settings, like for instance decreasing image size to 100px67px.
I tried to perform the same operation on both home and work machines. Different licenses, both macs.
I remember three-four years ago, I could easily create GIF files that worked on all platforms including iOS. I used Photoshop CS6.
Looking forward for someone to help me with it!
Thanks

"Related to this forum" does not mean there's much likelihood that many of the of the volunteers here will be familair with iOS or mobile devices.
Just a clarification in general:
BOILERPLATE TEXT extracted from the FAQ:
https://forums.adobe.com/thread/375816?tstart=0
Do not be abusive or aggressive in your tone
An aggressive, demanding, accusatory or abusive sounding post will often evoke an aggressive or abusive and unhelpful reply.
Remember, you are not addressing Adobe here in the user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.
As usual in these forums, if you don't like a given answer, you are entitled to your money back: $0.00.
I did you a favor by pointing out you should not hold your breath here waiting for a response.
Take that last compound sentence in your post and sick it where the sun don't shine. You don't get to dictate how anyone should answer your misplaced posts. Just because you start a thread doesn't mean you own it.

Ipod doesn't play the songs! please help!!

when i try to play a song, the title of the song just like sits there but it doesn't play, like the numbers don't go forward, it just sits at 0:00. It isnt frozen because i can change the volume and do everything else. When i click the middle button to toggle from volume to how far into the song i am, if i scroll over a bit to make me further in the song, it just changes to the next one.
Just now i tried going to the next song or something and whats happening now is every song i have is like popping up on the screen, like its scrolling through all my songs one by one till it got to the end and now its at the main menu.
Can anyone please help????

Try resetting your iPod and/or resyncing the files to the iPod. Also below are two articles that may help
Troubleshooting songs that skip on iPod
iPod: Troubleshooting songs and audiobooks that won't play

ITunes doesn't play wavs made on PC

I have backed up a number of PC files on a DVD and tried to put them on my iPod shuffle, using iTunes on my MacPro, when I realized that iTunes doesn't play them, so I can't put them on the shuffle. However, those wav files play alright in Quicktime on my Mac. Why not also on iTunes? Is there something that I have to enable, or some sort of conversion that I must do?
The files seem to load in the playlist, then they show in both the playlist and the Music folder. The files seem to be there, for when I Ctrl+click > Get info, within iTunes, it shows their size, sample rate, etc. It's just that they won't play.
Any suggestion will be much appreciated.
Message was edited by: aeneas12

Yes, I have played almost endless numbers of WAVs in iTunes. These files have been created with foobar2000, PlexTools Professional, and EAC for the most part.
My PC is switched off right now so I can't play with NMP WAV files and iTunes, but I still think that if you simply use another program to reconvert the problematic files to WAV format again (a lossless process) with known good settings, the files will likely play in iTunes.
Also, it may be that NMP has created "floating point" vs. "fixed point" WAVs, and that would cause problems with iTunes.

Firefox doesn't play embedded swf

I've looked on many forums, including Firefox, with no real answer. Running Firefox 4. It just doesn't play embedded SWF. My Adobe Flashplayer is up to date, so is the plugin. The page displays properly. But the area that should be displaying a movie is just represented by a tiny square. No error message appears. The same page doesn't show the movie in IE9 either.
Now from looking at the page information, it just requires Flashplayer 6 and above for the SWF area. I do have Flashplayer 10. The plugin says Shockwave Flash player 10 is up to date. Many other pages with different types of embedded movies play properly.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Also check that you aren't blocking cookies.
*https://support.mozilla.org/kb/Cookies
*http://kb.mozillazine.org/Cookies
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Note that a reset imports cookies, so isn't really suited if cookie issues are a possible cause, unless you clear the cookies.

Animated GIF Doesn't Play To The End

I've created a simple animated GIF in Photoshop CS6, eight seconds long, 30fps.
I have several layers that fade out at and then more layers that fade IN at four seconds. It plays perfectly in Photoshop, but a rendered GIF doesn't play entirely to the end - it stops prematurely.
How do I fix this? I've tried the animated GIF in a browser and it does the same thing in a PPT slide.
Anyone?
Thanks.

Thank you, Nancy.
I just reduced my project file down to 15fps and three seconds long. Testing the animation in the Save for Web dialogue box I see that it still won't play to the end. The fade-in stops before it's at 100% opacity.
The rendered GIF file size would be 242k. I HAVE to use Save for Web, as Save As will discard hidden layers and animations.
Still can't figure out what causes this, and I've had this happen to me before. (I bet I wouldn't have this problem rendering out of After Effects.)

Photoshop cs6 error "could not use the type tool because the target channel is hidden. happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point

photoshop cs6 error "could not use the type tool because the target channel is hidden. happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point. i really need to get thsi figured out. thank you.

You may have answered my question. I AM using the 64bit version of Illustrator CS6. I had no idea there were bugs in it that affected paths copied and pasted from Illustrator to Photoshop.
A bit more about what I'm trying to accomplish... I'm trying to follow Deke's tutorial (http://www.deke.com/content/dekes-techniques-018-creating-a-3d-pie-chart) which is already difficult since so much has changed between CS5.5 and 6, but then on top of that, I keep getting errors!
So I created the pie chart exactly as he shows and copied and pasted into Photoshop exactly as he does. Before submitting this post, though, I tried drawing just two very simple triangle shapes, copying them both and pasting them into Photoshop as a shape layer. The shapes weren't overlapping, but they were a part of the same shape layer just like the pie chart tutorial.
Thanks for your help. If there is anything else I should try before just giving up because of the 64bit bugs, please let me know.

Photoshop Elements 4.0 won't save changes for IPhoto 6.0.2.

At some point following installation of IPhoto 6.0.2, a problem appeared during editing photos with IPhoto preferences set for opening in Photoshop Elements 4.0: When I hit "save", the following dialog box appears: "could not build a preview because of a program error." My edited changes are lost and don't appear back into IPhoto. (On force-quitting PhotoShop Elements, I now CAN properly save the changes back to IPhoto.) Or sometimes Photoshop Elements “unexpectedly quits” during the editing attempt.
The problem was not solved by reinstalling Photoshop Elements 4 and is similar on two different computers (IMac G4 and PowerBook G4).
I assume the problem resides with IPhoto (presumably v 6.0.2), not Photoshop Elements. Even though I have my IPhoto Library backed up on a Lacie external hard drive, I've hesitated tweaking my IPhoto program (such as to ditch preferences or reinstall).
Any suggestions?
PowerBook G4 Mac OS X (10.4.6)

Lori, thanks a million! The answer does seem to have been found in the Adobe forum you suggested: It suggests going to user>library>preferences folder and delete Adobe Save for Web prefs. A friend also suggested saving Photoshop Elements edited changes by using "save as" as opposed to "save" which gives another (slightly tedious) fix that translates back to IPhoto.
John
PowerBook G4John Mac OS X (10.4.6)

Video doesn't play on internet

Hey Good People,
I have been scratching my head trying to figure out why this Flash video doesn't play. I checked to make sure it is in the correct format. I've tried FLV and H.264 neither of which plays. The custom play button appears and the alpha goes to 0 when clicked but the video doesn't play. It works in the flash environment and on my desktop when I dropped it into an html shell. Can anyone tell me what I need to do to make this work?
VIEW THE VIDEO
http://clienttestsite.x10.mx/beta/swfs/managers.swf
DOWNLOAD THE VIDEO
http://clienttestsite.x10.mx/beta/swfs/managers.fla

You should use Flash debug version. When you do, you will se a security error:
SecurityError: Error #2148: SWF file http://clienttestsite.x10.mx/beta/swfs/managers.swf cannot access local resource C:\Users\Demetrius McClain\Desktop\Value Insight\chevrolet\video.f4v. Only local-with-filesystem and trusted local SWF files may access local resources.
    at flash.net::NetStream/play()
    at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_play()
    at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_setUpStream()
    at fl.video::VideoPlayer/http://www.adobe.com/2007/flash/flvplayback/internal::_load()
    at fl.video::VideoPlayer/load()
    at fl.video::FLVPlayback/doContentPathConnect()
Obviously, you hardcoded video path to your local machine. Change that.

Photoshop CC doesn't play Curve point changes back in recorded Actions (Mac)

Similar Messages

Maybe you are looking for