Photoshop CC eraser lag, reinstalling drivers doesn't fix it.

I am back with the same problem I was having in this thread: https://forums.adobe.com/message/7063169
It keeps happening again; the only thing that lags is the eraser tool while I am using my Intuos5 with a grip pen in Photoshop CC. I have uninstalled and reinstalled drivers repeatedly, making sure they were all updated--it works for about a day before going back to the lagging problem.

Thanks for the reply Rave, but unfortunately that does not address my problem - my PC comfortably exceeds the minimum spec for the applications.
Of the three onward links from that page -
(1) "For additional information please see Creative Cloud Help | Missing CC apps from my Creative Cloud Desktop app" is a dead link (>"Sorry, this page is not available")
(2) "If you have confirmed that your computer meets and exceeds all of the listed System requirements then please see CC desktop lists applications as "Up to Date" when not installed." I had already worked through the 'solutions' on that page, culminating in the (bad) advice in 'Solution 4' which is what has got me into this current mess;
(3) "If you have already have Download Adobe Creative Cloud application you can use Download Center : Adobe Creative Cloud for your Product Download." isn't helpful as the download links send me back to the CC Desktop app, & it still won't allow me to download the 'CC' or 'CC (2014)' applications.
Thanks again, but do you have any other suggestions?
Ian

Similar Messages

  • Have tried everything in forum and cant burn cds or import them. itunes says to reinstall but doesn't fix problem.

    Hi.  I have had a message each time I open Itunes. It has varied but includes the following:
    Itunes was not properly installed. If you wish to import or burn cds you must reinstall itunes.
    Itunes helper not installed correctly - Error 7
    Itunes is not the primary __ for CDs/DVDs. Please reinstall itunes
    THE REGISTRY SETTINGS USED BY THE ITUNES DRIVERS FOR IMPORTING AND BURNING CD'S AND DVD'S ARE MISSING. THIS CAN HAPPEN AS A RESULT OF INSTALLING OTHER CD BURNING SOFTWARE. RE-INSTALL ITUNES -
    I went through tons of steps that I found online including all of the steps to Fix Gear Drivers.  I did the registery steps, I updated my CD & DVD drivers, I uninstalled and reinstalled Itunes, Bonjour, Quicktime and all else in the long list.
    Nothing has helped.  What else can be done?  The message has changed as I have done all of the self-fix steps but it won't let me burn disks still and still get errors.
    Help would be greatly appreciated! Thanks,
    FYI, the step that has me add back Upperfilters causes Itunes to no longer recognize the drives so I can't do this step.  I have tried everything listed.
    Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
    Hewlett-Packard h8-1160t
    iTunes 11.1.1.11
    QuickTime 7.7.4
    FairPlay 2.5.16
    Apple Application Support 2.3.6
    iPod Updater Library 11.1f5
    CD Driver Not Available
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.0.0.117
    Apple Mobile Device Driver 1.63.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 00E9BA500CDAF478
    Current user is not an administrator.
    The current local date and time is 2013-10-05 17:22:57.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce GT 545
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 482790cb0bb19071c82ab3a83d9cb983
    iPodService 11.1.1.11 (x64) is currently running.
    iTunesHelper 11.1.1.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    No drivers in UpperFilters.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
    I've tried the repair step using Add or Remove Programs too and no help.
    Message was edited by: Sherry1411

    I cross posted also but this forum looks better.
    I've had the same problem. I notice that my Superdrive justs looks at the disc for a bit and then spits it out.
    When I boot from my clone of my 10.4.10 setup, I can mount and burn a CD-R in iTunes, although the names of the tracks and disc are screwed up (while the actual data is correct).
    But in 10.4.11 and Leopard (also testing that on an external drive) the blank disc won't mount at all.

  • Photoshop CS5 Strange Lag--Delayed Response

    Hello, Im having a peculiar problem with my Photoshop, it is lagging. But let me explain.
    When I draw a line, I cannot see it.
    However, if I draw a second line, I can now see the first, but not the second.
    If I draw a third line, I can see the first and the second, but not the third.
    Or sometimes I will see the line as I draw it.
    But if I hit undo, nothing happens.
    But if I draw a second line, the first will disappear.
    I will decide to make layer 1 invisible. But I can still see it even though the visibility icon is off.
    But if I zoom in or out, suddenly layer 1 is not visible.
    It is not just a simple lag, because I can still operate, it's not frozen. But it also doesn't matter how long I wait, it won't catch up unless I take some form of action.
    It seems like the program knows what is happening, and is recording it as such, but it isn't showing me.
    I'm very sorry, I tried to look this up, but I couldn't seem to find the answer.
    Mac OSx 10.6.2
    Processor: 2x 2.26 GHz Quad-Core Intel
    Memory: 12 GB

    >> Mac OSx 10.6.2
    That's part of the problem - you should be on 10.6.8 to pick up a ton of bug fixes.
    And if you meant 10.7.2, then you'll have to wait for Apple to fix the video card drivers.
    In the meantime, you can try disabling OpenGL drawing to avoid problems in the video drivers.

  • Erase and reinstall help - random shut off

    I've been to diagnose my random shut off of my early '06 iMac Intel. It seems to shut down when I use a lot of memory.
    I've done the AHT, resetting the PRAM, ran TechTools, and DiskWarrior.
    It doesn't happen as frequently, but it still occurs. Shuts down randomly once a week. And I have to wait 10 minutes or more to start up again.
    I saw a some users reinstalled OS X and it helped them.
    SO FINALLY MY QUESTION, , I'M CURRENTLY RUNNING OS X 10.5.8 LEOPARD, BUT MY iMac ORIGINALLY CAME WITH TIGER 10.4.4, WHEN I ERASE AND REINSTALL DO I NEED TO USE THE ORIGINAL TIGER DISKS OR CAN I USE THE NEW LEOPARD?
    Thank you for your help, I tried searching the forums but couldn't find an answer. Greatly appreciated.

    ran Power Fractal and is still running for 15 minutes. Nothing happening. I'm not sure how to use the program. I messed with the colorspeed, i put it to 100. Put the max count to 131072. Zoom factor 10. I even opened up Final Cut Pro and Adobe Photoshop all running at the same time.
    You did great, doesn't seem to be what I suspected.
    I noticed a shut off when free memory is 500 or less.
    Fantastic obsevation, RAM is one of the hardest things to test for, RAM tests can only be trusted if they find a problem, not if they don't... seems OSX is a better RAM tester than any RAM test, that being said...
    Memtest OS X...
    http://www.memtestosx.org/joomla/index.php
    Rember is a freeware GUI for the memtest ...
    http://tech.kateva.org/2005/10/rember-freeware-memory-test-utility.html
    Run a test as long as you can.

  • Having problems erasing and reinstalling Mac os x on 2007 MBP 15in

    Hello
    I am having some problems here and was hoping for some help.
    Just recently here, I decided to erase and reinstall Mac Os X on my sister's 2007 MBP. She just recently got a new 15in MBP and wanted most of her content on the 2007 to be erased. Well... I did some reading around and found that the easiest way to do so was with the os X DVD that came with the thing. Problem is....I can't seem to find it for the 2007 MBP. So I decided to try the 2010 version. Went into the disk, ran disk utility, wiping the hard drive, did all the right steps according to Apple, and then rebooted to try get a clean version of OS X on. Well, problem is, it would come to the language select screen, but after that selection, it would come up with this error:
    "Mac OS X can't be installed on this computer
    If you want to restore your system from a Time Machine backup, click "Restore from Backup"
    I've tried reformatting the HD several times and even tried restoring, but it wouldn't display my system restores...
    So my quesiton is, is it becuase I have the wrong DVD that its not working or is there something else I"m missing?
    Any help would be vastly appreacited (especially since its not my computer!)
    Thanks!
    Jordon Spronk

    The install disks that come with a model of a Mac have certain hardware drivers for the computer and video card, you can't use another Mac's install disk.
    However you can use the $29 Snow Leopard install disk, but it doesn't come with iLife, that's extra.

  • After installing 10.6.8, printer goes to pause mode, reinstalling printer doesn't change anything.

    Printer is an HP 5850 connected to Apple Time Capsule via ethernet, and shared by two Apple Macs each running 10.6.8.  Printer was using HP Photosmart P1000 driver as there is no HP 5850 driver available for 10.6.  Printer was working fine in both text and graphics/photos until software update 10.6.8 was installed.  Now, after starting a print, the printer goes into pause mode.  Continued attempts to resume printing result in printer going to pause mode.  Deleting and reinstalling printer doesn't do anything, nor does installing latest HP printer drivers.  What is going on here?

    The 10.6.8 update changed a number of printer backend services. For many brands of printer this has stopped them from printing, although usually there is an error message associated with the print job rather than the queue simply pausing.
    You can check if you are getting an error by selecting the paused job in the print queue and pressing the blue Job Info button. If there is no mention of a backend failure then you may be able to get your printer working again by simply opening Print & Fax, selecting the HP printer and presssing the minus button under the list to remove the printer. Then click the plus button to add the printer again.
    If selecting the Job Info button for the paused print job does reveal that there has been some sort of backend failure then have a look at this thread. There is a lot of information to go through but there are responses with links to scripts that can recover your previous 10.6.7 backend services, assuming you are using Time Machine.

  • To erase and reinstall Mavericks, do I need anything more than an internet connection?

    In the Apple support doc OS X Mavericks: Erase and reinstall OS X, it doesn't say anything about a USB drive, but in all of the articles online, it suggests downloading Mavericks onto a USB drive first. I assume that an internet connection is all that is needed, is that right? Or should I go the USB route?

    You can do either - our models can boot to Internet Recovery or you can download Macvericks, wuit when it starts to install and use the "Install OS Mavericks.app" in your Applications folder to create a bootable installation USB thumb drive. You'll need a 8GB+ thumb drive and you can use DiskMaker X to create the bootacle installation drive.
    Personally, I always keep a thumb frive with the latest installer.
    Good luck,
    Clinton

  • How can I perform a clean erase and reinstall on my iBook G4?

    Hi everyone,
    I have misplaced a help article that I successfully used to perform a clean erase and reinstall on my iBook G4.
    I've been trying to get the erase and reinstall started by inserting the software restore cd (disk 1 of 8) that came with my computer, but the cd doesn't give the option to erase and restore.
    When I try holding down "c" after restarting (right before I hear the dong sound), it just boots like it normally does and I still don't get the option to erase and install.
    Can someone help?
    Thanks so much,
    Allison

    I don't know fiberoptix. The above poster mentioning 8 disks would be talking about Panther, whereas in your case I am not sure what the second tiger DVD has on it.
    I suggest you post a new topic in the Tiger forum here:
    http://discussions.apple.com/forum.jspa?forumID=752
    as you will get a better response if it is a new topic, and the Tiger forum has a big audience and your question will get more attention.
    Good luck.
    roam

  • Unable to restore from Time Machine after an erase and reinstall - MacbookPro cannot access my old Time Machine backup volume. Desperate for help please?

    My MacbookPro would not move past the Apple logo and spinning wheel for a number of hours.  After trying the numerous suggestions to solve the issue I eventually opted to erase and reinstall feeling confident my Time Machine backups would come to the rescue.  After a successful erase and reinstall I tried to restore all my data from my TIme Capsule using Command-R during start up and by using the Migration Assistant.  Neither worked and I have received messages to the effect that the backup volumes on my Time Capsule cannot be access because I have entered a wrong password or because the backup volume is damaged.
    When I open my Time Capsule in Finder and click on my sparsebundle I get an eror message saying that the disk image could not be opened and that the resource is temporarily unavailable.
    Desperate for some help and comfort that many years of personal data have not been lost.
    Thank you.
    M

    When I try to Verify option it says Unable to Verify - Resource temporarily unavailable.
    Here is the past of the log screen:
    2013-06-09 15:00:00 -0500: Disk Utility started.
    2013-06-09 15:09:01 -0500: Disk Utility started.
    2013-06-09 15:19:53 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 15:19:53 -0500:
    2013-06-09 15:20:00 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 15:20:00 -0500:
    2013-06-09 15:20:05 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 15:20:05 -0500:
    2013-06-09 15:20:13 -0500: Verifying Image “Macajee’s MacBook Pro”
    2013-06-09 15:20:14 -0500: Unable to verify “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
    2013-06-09 15:20:14 -0500:
    2013-06-09 15:25:21 -0500: Verifying Image “Macajee’s MacBook Pro”
    2013-06-09 15:25:23 -0500: Unable to verify “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
    2013-06-09 15:25:23 -0500:
    2013-06-09 15:25:27 -0500: Attach Image “Macajee’s MacBook Pro”
    2013-06-09 15:25:27 -0500: Initializing…
    2013-06-09 15:25:31 -0500: Attaching…
    2013-06-09 15:25:31 -0500: Finishing…
    2013-06-09 15:25:32 -0500: Unable to attach “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
    2013-06-09 15:25:32 -0500:
    2013-06-09 20:02:06 -0500: Disk Utility started.
    2013-06-09 20:05:22 -0500: Disk Utility started.
    2013-06-09 20:07:11 -0500: Disk Utility started.
    2013-06-09 20:18:34 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 20:18:34 -0500:
    2013-06-09 20:19:34 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 20:19:34 -0500:
    2013-06-09 20:19:36 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 20:19:36 -0500:
    2013-06-09 20:22:29 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 20:22:29 -0500:
    2013-06-09 20:22:33 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 20:22:33 -0500:
    2013-06-09 20:22:45 -0500: Verifying Image “Macajee’s MacBook Pro”
    2013-06-09 20:22:45 -0500: Unable to verify “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
    2013-06-09 20:22:45 -0500:
    2013-06-09 20:34:53 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 20:34:53 -0500:
    2013-06-09 20:34:56 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
    2013-06-09 20:34:56 -0500:
    2013-06-09 20:38:17 -0500: Verifying Image “Macajee’s MacBook Pro”
    2013-06-09 20:38:17 -0500: Unable to verify “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
    2013-06-09 20:38:17 -0500:
    2013-06-09 20:47:35 -0500: Disk Utility started.
    2013-06-09 20:53:06 -0500: Disk Utility started.
    2013-06-09 20:55:30 -0500: Disk Utility started.
    2013-06-09 20:56:40 -0500: Disk Utility started.
    2013-06-09 21:06:32 -0500: Verifying Image “macajee’s MacBook Pro”
    2013-06-09 21:06:32 -0500: Unable to verify “macajee’s MacBook Pro.” (Resource temporarily unavailable)
    2013-06-09 21:06:32 -0500:
    2013-06-09 21:07:08 -0500: Verifying Image “macajee’s MacBook Pro”
    2013-06-09 21:07:08 -0500: Unable to verify “macajee’s MacBook Pro.” (Resource temporarily unavailable)
    2013-06-09 21:07:08 -0500:

  • I need to change my computer... how can I uninstall Photoshop element 11 to reinstall it on my new c

    I need to change my computer... how can I uninstall Photoshop element 11 to reinstall it on my new computer with the same key ?

    Just go to Help>Deactivate in the editor before you uninstall.

  • HT5628 When I install Windows 8 on my MacBook Pro(13-inch,Early2011),the Super DVD Drive doesn't appear in Windows 8 and installing Boot Camp 5 drivers doesn't solve my problem,what can I do?

    When I install Windows 8 on my MacBook Pro(13-inch,Early2011),the Super DVD Drive doesn't appear in Windows 8 and installing Boot Camp 5 drivers doesn't solve my problem,what can I do?

    Go into your system preferences and click the startup disk icon then select your Mac HD. 

  • Trying to uninstall photoshop so I can reinstall but it does not show up on Suite Cleaner tool?

    I previously had a trial of photoshop and then deleted it by putting in trash and empyting (my bad). I am now a subscriber to CC, but the app manager won't let me reinstall it just says "up to date", so someone suggested to get the cleaner and then I could remove JUST photoshop and reinstall b/c I don't want to delete my ID, AI, or muse files.
    I need help figuring out which of these it lists I should uninstall because none of them are labeled as photoshop and like I said I don't want to delete other files.
    This is the list the cleaner gives me.
    Creative Suite 6 Design Standard
    Adobe Muse
    Adobe InDesign CS6 Application Base Files
    AdobeCreativeCloudDriver
    and Adobe Illustrator CS6 Core
    Which of these should I uninstall so for photoshop so I can reinstall it? I don't understand why if it's detecting photoshop files on my comp (supposedly why it won't let me install photoshop, right?) that they don't show up here.
    Thanks for any help.

    You can uninstall Adobe photoshop from below location on your MAC.
    1. Goto Applications –> Utilities –> Adobe Installers.

  • I installed Photoshop CC (2014) yesterday through the Creative Cloud app. Now, when in Lightroom when I go to "edit in"and select Photoshop CC (2014) and click on "edit copy with Lightroom adjustments",  it opens Photoshop CC (2014) but my photo doesn't s

    I installed Photoshop CC (2014) yesterday through the Creative Cloud app. Now, when in Lightroom when I go to "edit in"and select Photoshop CC (2014) and click on "edit copy with Lightroom adjustments",  it opens Photoshop CC (2014) but my photo doesn't show up?  My photo does show up when I click on "edit copy" or "edit original".
    How can I correct that so that I can open up a photo from Lightroom WITH the Lightroom adjustments? Thanks!

    I'm having a similar problem, but only with jpg's. I have PS CS6, CC, and CC 2014. Other image file formats function normally with regard to the "open with" list. PS CC 2014 appears on the list. But with jpg's only PS CC appears on the "open with" list and 2014 can't be added by the browsing for it.
    The curious thing is that if I have any of the three versions of Photoshop open, click on Photoshop CC in the "open with" list, the image opens in whatever version is already open on my computer. This is true of all image formats. No matter which version I pick from the "open with" list it opens in the currently running program. I use only the latest version so keeping it open all the time is an easy work around. I won't uninstall any of the earlier versions lest more file association quirks result. it would be nice to have this matter fixed.

  • Opening iTunes shows an error- The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem. ; Even after reinstalling iTunes doesn't start!

    When I start the iTunes program it comes up with this.. pls help!!
    "The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem."
    Even after reinstalling iTunes doesn't start!

    Repair your Apple Application Support.
    Control Panel > Programs n Features (Win7) or Add n Remove Programs(XP) > highlight AAS, click CHANGE then REPAIR.

  • Photoshop CS5 update doesn't fix artifact problem in the menu bar !

    Hi to all,
    I've installed the new update (december 7) recommended by Adobe, but that doesn't fix the Artifact problems in the menu bar !!!
    More, with my Windows 7 Pro (French language), Photoshop CS5 video pilot create artifacts in the menu bar in several situations.
    With Windows classic Theme chosen, theme management disabled:
    1. Opening a photo and applying a filter (especially Noise Reduction).
    2. Opening a photo and changing some preferences.
    3. Opening a photo with Windows 7 File Explorer working cause the pilot to crash with a black screen, ans followed by a message saying that Win 7 has recovered the video pilot.
    To suppress most of the problems, I need to Activate "Themes" and choose an Aero theme or the Basic Theme.
    I also need to activate some items that slow the PC !
    Very strange !
    Could someone help, me please ?
    Have a Nice Day.
    Thierry

    Yes, I've an Asus ENGT220/G/DI/1GD3, tried Windows default pilot, 2009 Asus pilot "nv19045_Win7Vista64.zip", and 2010 latest version "nv25919_Win7Vista64.zip", no change !
    More, I've exchanged the video car by a "monster" ENGTX465 with it's driver, NO CHANGE !
    So what to do ?!
    Help, please !

Maybe you are looking for