Photoshop CC Installation issues are causing a bsod

Tried installing Photoshop CC 4x, only Photoshop, same result. BSOD detailing a kernal fault. Ran memtest, chkdsk. No errors found.
It would install to 95%, stay for 5min or so, then typically blue screen.
The last time I tried I got an interesting error:
"Setup.exe - Application Error
the instruction at 0x00000000770CAFCB referenced memory at 0x000000005C35A38C. The required data was not placed into memory because of an I/O error status of 0xc0000056."
In the Creative Cloud app, it stated Photoshop CC installation failed and had a "more info" link:
"There was a problem installing Photoshop CC
For more info....
Installation failed
Installation completed though some optional components failed to install correctly. (6)"
I had to then manually shut down the computer as it was frozen.
Specs:
Windows 7
intel core i7-2860QM
16GB RAM
NVIDIA GeForce GTX 580M
C: 32GB free

And what disk setup? This behavior is typical of flakey SATA drivers and/or sectors of your harddrive being inaccessible to produce the activation footprint, which on some SSDs or platter drives with "reserve" is by design and may require setting certain options eitehr by using configuration tools or physically changing the dip switches/ contact bridges used to confiure the drives...
Mylenium

Similar Messages

Photoshop CS6 Installation issues

Anyone on 10.7.5 having PSCS6 installation issues after trying to apply update via Creative Cloud?

This link took me to location where I chose the appropriate version of Bridge update and it worked. My verion was updated to 5.0.1.23
http://www.adobe.com/support/downloads/product.jsp?product=108&platfor m=Windows

Photoshop CC Installation issues

I am having problems installing Photoshop CC (Trial Version), it appears to successfully download but then fails installing an update - I get a U46M1P6 error on the update installation.
Even though the installation appears to install successfully, whenever I try and open it I get an error message. I have run the Adobe Support Advisor software and no issues have been found.
System details:
Error shown on Creative Cloud:
Error shown when trying to launch PhotoShop
Report from Adobe Support Advisor:
Any advice gratefully received!

Thank you for your comment, however could you expand on "does not meet requirements"
In what way does my system not meet them?
Pete

Photoshop CS2 installation issue

I had to clone my hard drive, and then CS2 didn't work anymore. I downloaded the individual programs from http://www.adobe.com/downloads/cs2_downloads/index.html, and they installed and ran OK except for Photoshop. At the end of the install I got this error message: "Error 1402.Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\...Adobe Photoshop CS2 - {236BB7C4-4419-42FD-0409-1E257A25E34D}. Verify that you have sufficient access to that key, or contact your support personnel." I tried it as the administrator, etc., but I keep getting this message. What can I do?

Hello Jeff,
I am using Windows 7 Pro, and yes, all was operating well before the activation servers shut down. Also, as I said in the initial message, I was able to download and install the CS2 versions of InDesign, Illustrator, and Acrobat (downloaded from http://www.adobe.com/downloads/cs2_downloads/index.html ). When I try to install the version of Photoshop CS2 (downloaded from that same site), I get the error message (right at the very end of install) "Error 1402.Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\...Adobe Photoshop CS2 - {236BB7C4-4419-42FD-0409-1E257A25E34D}. Verify that you have sufficient access to that key, or contact your support personnel."
I'm a high school teacher and I use these programs all the time, so this is becoming kind of inconvenient for me...
Thanks for sticking with me on this,
A. S. Pels
<e-mail reply removed by Moderator>

PhotoShop CS2 installer issues...

CS2 version 9.0.2 photoshop, cant get rid of this every time I open PS...
any ideas?
"The Adobe Updater could not be started. Please reinstall the application and components."

Hi Scott, thanks for your reply...Unfortunatly we lost all of our discs/books/pictures, almost everything in our home awhile back, so that has not been an option...
any plan b thought?

Photoshop CS5 installation issues with Yosemite OS on Mac

I have tried the Adobe install program and it does not work.

[discussion moved to Downloading, Installing, Setting Up forum.]

Issue where audio files are causing buffering in Adobe Presenter 9.0.2

I have a module that I have published that the audio files are causing the playback to buffer at the end of the slides. I have unchecked Disable preloading of embedded Flash content, since I have seen that suggestion previously causing issues. I do not have videos in this module. It did this when I did a preview of my PowerPoint presentation. Thinking publishing could give me a possible different outcome once it was on the Connect server. However, the same issue occurs. I have tried copying the slides and placing them into a new presentation but that did not work as well, I had the same issue. Any suggestions on how to fix this? I am at a holding point since I cannot make the course live if I know this is an issue on playback.

Hi kornieme,
Please package the published content using package option in presenter and put it in some drop box and send me the link..
Thanks
Sidhartha

Lightroom 4.2 Installation Issue

Leaving this around in case anyone else has the same problem -- Solution found -- Windows installer issues / registry issues -- used the Microsoft Fix it tool (http://support.microsoft.com/kb/2438651#reso3) to correct. 4.2 install ran fine.
I've read through the posts in the Lightroom forum regarding LR 4.2 install issues. I will list here the things I've done to try to get the install to work:
1) Downloaded the installation software twice.
2) Ran the setup program in admin user mode.
3) Ran the install in admin user mode.
4) Get the following error in a Windows Installer window:
The feature you are trying to use is on a network resource that is unavailable.
Click ok to try again, or enter an alternate path to a folder containing the installation package 'Adobe_Lightroom_x64.msi' in the box below.
Use source:
c:\Users\RMJF\AppData\Local\Temp\{...}
What I have found (after displaying hidden AppData folder):
The location where the .msi file resides is different from the one defaulting in the above window.
I select this alternate path, but still cannot complete the installation.
Furthermore, when I cancel the install, I get this error:
Adobe Photoshop Lightroom 4.2 64-bit Installer Info
Error 1714. The older version of Adobe Photoshop Lightoom 4.2 64-bit cannot be removed. Contact your technical support group
I have been running LR since the beginning of time and most recently LR 4.1, so there is no 4.2 installed.
Also, I tried to fix the install of 4.1 via the programs in Control Panel. I cannot repair it and get this error:
The installation source for this product is not available. Verify that the source exists and that you can access it.
All versions (except the 1.0 version) were downloaded and installed from the Adobe LR site.
So, looking for suggestions.
Seems like there are some missing files from the 4.1 version that are hindering the install of 4.2???
All quite frustrating. Hope you can get me to a speedy solution.
(System info: Windows Vista 64-bit Home, SP 2, 20 GB of disk space to spare! Also, I have set the install program to be allowed by the anti-virus program. I have run a registry clean-up, as well. No other apps are running during the install.)
Message was edited by: marzo19

untill now, 3 phones later, and mayby 10 attemps later to install it: notting. the errors that i am gething are the same as above, but nothing helps for me.
even the microsoft fixid diden't help.
So also desperate.

Installation issue on opensuse 11

Hey All, Im a Windows guy still struggling with Linux set-upsso take it easy on me! :) and Im having a hard time getting blaze installed and running. This is what Ive done so far. I've successfully set-up the latest copy of openSuse11 64 bit version with: Tomcat 6.0.16 (Tested and running) ANT 1.7 JAVA SDK & JDK 6 Junit (ant-junit, junit, junit-javadoc, junit-manual, libcppunit-1_12-0) Downloaded both blazeds.war and blazeds_src_3-0-0-544.zip From Tomcat Manager I uploaded the blazeds.war file successfully. I unzipped the zip file into root/blazeds and from a command prompt ran ant. These are the errors Im getting: * [taskdef] Could no load definitions from resource net/sf/antcontrib/antcontrib.properties. It could not be found. (Repeats about a dozen times) * BUILD FAILED * /root/blazeds/build.xml:445: The following error occurred while executing this line: * /root/blazeds/resources/fds-ajax-bridge/build.xml:52 Problem: failed to create task or type if Cause: The name is undefined. * Action: Check the spelling * Action: Check that any custom tasks/types have been declared * Action: Check that any <presetdef>/<mac rodef> declarations have taken place. Variables: env | grep _HOME ANT_HOME = /usr/share/ant JRE_HOME =/usr/lib64/jvm/java/jre JAVA_HOME =/usr/lib64/jvm/java/jre SDK_HOME =/usr/lib64/jvm/java/jre JDK_HOME =/usr/lib64/jvm/java/jre Any ideas? Brad

Hi Alex,
Sorry I've been away and just got back. Presently I'm working from jrun4 and would like to use blazeds instead. Once my projects get going I would need the ability to use my customers already made linux/tomcat boxes and just plug in blaze.
I look forward to your answer.
Brad
On Fri, Aug 1, 2008 at 12:57 PM, Alex Glosband
<
[email protected]> wrote:
A new message was posted by Alex Glosband in
Configuration and Getting Started Discussion --
Installation issue on opensuse 11
Are you just trying to install and run BlazeDS? Why do you need to build from source?
-Alex
View/reply at
Installation issue on opensuse 11
Replies by email are OK.
Use the
unsubscribe form to cancel your email subscription.

Installation issues with PrE 9 require OS restore!!!

I have run into two issues when attempting to install the trail versoin of PrE 9. One of the issues is severe enough that it required a system restore.
1) PrE cannot complete installation because MSXML 6 fails to install.
2) PrE rolls back the installation and this causes a corruption of all installed installations.
...1) the issue seems to be for those of us who already have MSXML 6 service pack 2 installed. PrE should not be attempting to downgrade MSXML from service pack 2 -- which it apparently is trying to do. MSXML is system protected in XP SP3 and actually can't even be un-installed. MSXML was installed as part of Microsoft's Visual Studio application. I'm not sure when the service pack was installed but you can see more by looking into Microsoft KB954459.
...2) When the rollback begins, I start getting dialogs asking me to 'configure' an application. The dialogs disappear and reappear multiple times. This behavior continues when the rollback is completed. You cannot shut down the computer with these dialogs on the screen as the system prevents a shutdown. I tried to cancel after watching the screen for 30 minutes. Finally, I started to kill applications. I was able to reboot.
When the system came back up, the configuration dialog appeard every time I would run a new application. For most of the applications, the configuration would complete and the dialog would not appear again when the program is re-launched. However, several applications were corrupted (probably because I was killing the tasks to configure them to get my system to reboot).
I made a backup of my complete system prior to installing PrE. I was able to restore to a state prior to installing PrE without issue (thank you Acronis!)
I realize there are millions of different system configurations. You may want to take some extra precautions if you do have KB954459 installed on your system!
I'm looking forward to a resolution of this issue and will provide any additional information as required.
In the end, I would like to install a 'real' version on my video editing workstation which is running Vista and may not have this issue. However, I would really like to take it for a test drive on my other system first as it is far easier to 'protoect' a 80 GB hard drive than a system with multiple (and larger) drives.

Ouch. You should file a bug report with Adobe asap. Adobe - Feature Request/Bug Report Form
Cheers,
Neale
Insanity is hereditary, you get it from your children

Adobe Revel 2.3.2 installation issue

Dear Revel users:
We are aware of the installation issues people are experiencing with the latest iOS version release, and we are very sorry for the inconvenience it has caused.
We do rigorous testing prior to all releases, but unfortunately an unexpected interoperability issue has occurred with the way our App is getting bundled up for delivery to customers. We are working closely with Apple to resolve the issue as soon as possible, and we've re-submitted an update to see if this can help us narrow down the failure. Thank you for your patience. Meanwhile, feel free to access Revel via your web browser, Mac, windows 8, Android devices.
I will update this thread when I get new information.
Regards,
Pattie

Dear Revel users:
As you may know, many users had issues installing Revel iOS update version 2.3.2. We are pleased to inform you that the issue has been resolved. We know how frustrating it must have been to not be able to access your photos and videos, and are truly sorry for all the inconvenience.
Please go to the App Store and update your app, and thank you for your patience as we worked to resolve the issue. Please ensure that your operating system is on iOS version 7.1 or above when updating the app. We do rigorous testing prior to all releases, but unfortunately an unexpected interoperability issue occurred with the way our App was getting bundled up for delivery to customers.
If you are unable to upgrade to iOS version 7.1 or above at this time and can not load revel from the app store on your device, please download the latest version of the Adobe Revel app from iTunes to your computer and sync it to your iPhone, or iPad. If you are unfamiliar with this process, please plug your iOS device in to your computer with the USB cord that came with your device. Launch iTunes on your computer and select help > iPhone or ipad user guide. There are help topics there that will explain how to connect and sync your device.
If you have any more questions or are still experiencing problems, please go to our user forums and post to this link : https://forums.adobe.com/thread/1513106. Again, please accept our sincerest apologies and thank you for your patience.
The Adobe Revel team

OVM Manager 3.2.1 installation issue

Hi,
We are trying to install OVM Manager 3.2.1(on OEL 6.2) but unable to complete the installation as it stops after installing ADF and does not proceed further. Please find the output below.
Verifying configuration ...
Start installing the configured components:
1: Continue
2: Abort
Select Number (1-2): 1
Step 1 of 9 : Database Software...
Installing Database Software...
Retrieving MySQL Database 5.5 ...
Unzipping MySQL RPM File ...
Installing MySQL 5.5 RPM package ...
Configuring MySQL Database 5.5 ...
Installing MySQL backup RPM package ...
Step 2 of 9 : Java ...
Installing Java ...
Step 3 of 9 : Database schema ...
Creating database 'ovs' ...
Creating user 'ovs' for database 'ovs'...
Step 4 of 9 : WebLogic ...
Retrieving Oracle WebLogic Server 11g ...
Installing Oracle WebLogic Server 11g ...
Step 5 of 9 : ADF ...
Retrieving Oracle Application Development Framework (ADF) ...
Unzipping Oracle ADF ...
Installing Oracle ADF ...
Installing Oracle ADF Patch...
OVMM installer exits after Step 5. We could not find any errors in log file.
Any suggestions please?
Thanks in advance!

This issue was caused by root user cannot su to oracle user.
The W/A is to disable ypbind service and run createOracle.sh to make the oracle user a local one.
How to disable ypbind? issue following command based on your host env,
service ypbind stop
or
/etc/init.d/ypbind stop
More details, pls check Bug 16416238 - manager installer should add a prereq check that root can su to oracle user

Forms 10g Installation issue on windows 7 Professional service pack 1

hi
I am trying to install oracle forms 10g 64 bit windows 7 Professional service pack 1 ..
Below are 2 files that i am using ..
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
But it failed but the error is ..
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.1 Failed <<<<
just wondering if there are any workaround ..

Christian is right - Forms 10g R2 (version 10.1.2.0.2) is not certified for installation on Windows 7. You must apply a Forms 10g R2 patch to bring the version to 10.1.2.3.0 for it to be certified. You must have a My Oracle Support account to obtain the patch.
Now, to your question - is there a workaround; the answer is yes. There are known issues with this installer. I'll list them and their workaround.
1. The Oracle installer checks for a specific set of Windows versions rather than check for a minimum Windows version.
Workaround: Right-click the Installer and select Properties. Click the Compatibility tab and click the checkbox: Run this program in compatibility mode for: Windows XP SP3).
2. The Oracle Installer can't detect Windows Managed Virtual Memory (VM).
Workaround: You must temporarily change the Virtual Memory settings and specify specific Initial and Maximum sizes. See this Microsoft article for more information on changing VM settings. http://windows.microsoft.com/en-us/windows-vista/change-the-size-of-virtual-memory
This change will require you to restart your computer. After you have successfully installed Oracle Forms 10g, you can restore the original VM settings.
3. The Oracle installer MUST be installed as an "Administrator".
Workaround: Windows 7 uses "Least privileged user" so you must right-click the Installer and select the Compatibility tab. Click the "Run this program as an administrator" checkbox.
4. Not a Oracle installer issue, but you will have to install the 32-bit version of the Oracle Java Runtime Environment (JRE) (1.6.0 - not 1.7.0) because Oracle Forms is a 32-bit application so it will not be able to use the 64-bit JRE.
Run the Oracle installer and it should now install succesfully.
Craig...

My external hard drives are causing problems when i capture DV in FCP

We have external hard drives (2 different brands lacie and WD) are causing dropped frames when I capture DV in FCP. This only happens when they are connected via firewire 800. When I connect them using USB everything works great. Any ideas why this could be? We have 2 of each drive and 2 older mac pros and they both have this issue with every combination of drives I try. I've also tried reseting the ports with no luck...

Connecting your camcorder to even 1 FW drive constitutes daisy-chaining. Even if you have two FW ports in your Mac, connecting a drive to one port and your camcorder to the other is the same as daisy-chaining as far as your Mac is concerned.
Try capuring from your camcorder with no exernal FW drives attached. Verify that works before trying anything else.
Also, I noticed your profile says you have a Mac Pro. You might consider adding a FW card in order to get extra FW ports that are not on the same FW bus as the built-in FW ports. Then you could connect your external FW drives to the card; and your camcorder to the built-in ports and it should work.

Photoshop CS2 installation failures

I have been having trouble with Photoshop CS2 installation. PS was working fine bur 3 days ago told me there was a serious error and I had to reinstall which I have tried 5 times but it gets to the end and tells me a file is missing and to quit which I do but no PS. Adobe told me to create a disc image using disk utility and install from that. Still failed. I had to install on another bootable disc with 10.4.0 and it worked so there is a software conflict somewhere, probably with the latest security update (2007) but I do not want to have to reformat my HD and reinstall ALL my software from scratch and then NOT update to latest software without knowing what is going on. Can anyone offer any suggestions please.
Adobe say there is no conflict issue with latest security update. Have tried all sorts of install methods but it always fails at the last hurdle!
David

Firstly I am not installing the whole suite of software, only PS CS2 so Version Cue is not a problem.
Adobe also say there is no conflict issue with Apple security update and CS2. They tell me about making sure I have admin read and write for registrations database but this asumes I have PS installed which I cannot
Secondly I tried the CS3 Beta download which incidentally is 685Mb and it will not mount, so I will have to try another lengthy download

Photoshop CC Installation issues are causing a bsod

Similar Messages

Maybe you are looking for