Photoshop CC layer error

This problem starting happening last week and still hasn't been fixed. I tried updating my photoshop cc but the problem persists. it doesn't happen when I switch over to Photoshop CS6.
If I select a layer in my file and try to move it around the canvas, photoshop cc automatically selects another layer and I end up moving entirely different layers around. This only happens when I'm moving by mouse, and does not happen when I'm moving using my keyboard.
I can't effectively photoshop cc anymore because of this error...

Sounds like you have Auto-Select checked in the tool options bar for the Move Tool.

Similar Messages

  • Photoshop Scratch Disk Error OSX 10.7.5

    I had a Mac with CS5.5 installed. Suddenly i got an Error Message on Startup: "Could not open a scratch file because the disk is unavailable...."
    Unable to solve the Problem I Updated to CS6.0 in hope of fixing the Problem that way. It did not.
    So i deleted the User and created a new one which worked, for a while at least. Now i have the same Error again!
    After searching around a bit i found this Thread: Re: Photoshop Scratch Disk Error OSX Lion 10.7.3
    In this Thread FocusCreative22 found the answer to that Problem. He suggested checking "Ignore Ownership on this Volume" in the Volume Info.
    My Problem now is that either through having a newer OS version or only having the Startupdrive i dont have the checkbox "Ignore Ownership on this Volume". How to fix this Problem then?

    Chris,
    Thank you for responding. I think you're onto something. I looked in disk utility to see if I could repair permissions on the scratch volume, as Lundberg suggested, however the option to do so was greyed out due to this message: "Not available because the selected disk is set to ignore ownership". So I went to the partition, pulled up the Get Info box and saw that the "Ignore Ownership on this Volume" box was not checked. I checked it to see what would happen, and although the option to repair permissions is still greyed out in disk utility, now Photoshop starts up perfectly, even with the problematic scratch partition set as the primary Photoshop Scratch Disk.
    Is this the wrong way to get to the right answer?
    Concerning your other suggestions, I was able to use Go To Folder to get to the /private folder, and I saw that it said I could only read. I was able to add my user account and give it Read/Write permission through the Get Info dialogue box (I fear Terminal unless I have explicit instructions). Is this what I want? I also looked into the /volumes folder and apparently there is nothing within it, unless the folders are hidden I suppose. I checked permissions of my main drive (startup disk, on which all my applications reside) and they claim that I have read/write privileges. However I'm only viewing this in the Get Info box; is that not the right place to see/alter it? Because this whole time the scratch partition also claimed that I have read/write permissions and that was obviously not true, as it only started working right once I checked "Ignore Ownership on this Volume". But it's incredibly confusing because I could save files to the scratch drive from Photoshop; I just couldn't choose it as a scratch drive.
    The short question is: is it ok that I simply chose to ignore ownership on these disks, and that I messed with the /private folder, and/or do I need to do anything else?

  • PDO Layer Error while approving a changed version of PO

    Hi,
    We are in SRM7.0 , EC Scenario , ECC 6.0
    In SAP SRM system am experiencing a workflow issue , second level approver is not able to approve/receive the workitem of a changed PO. Moment we try to open the PO (changed version) and navigate to Approval tab, the approval flow is missing and showing the error as
    PDO Layer Error
    An Exception has occured
    Every time we must restart the workflow due to which the approval needs to be done again from 1st approver.
    We have raised an OSS Message and following is the response from SAP
    " The second approver does not get an workitem because the workflow got the status error. The cause of this error is your BADI implementation
    ZCL_SRMWF_AGENT_PO_BUYER method /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_AREA_TO_ITEM_MAP. This method returns an initial table LT_AREA_TO_ITEM_MAP.
    Run method CREATE_DECISION_SETS (/SAPSRM/CL_WF_PROCESS_MGR_SBWF) with
    parameter IV_PROCESS_GUID = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx "
    When i executed this method CREATE_DECISION_SETS (/SAPSRM/CL_WF_PROCESS_MGR_SBWF) with
    parameter IV_PROCESS_GUID = Changed version PO GUID , i got the following error
    Exception CX_BO_ABORT triggered
    Termination triggered in '' - Rollback required
    Can anyone please help !!
    Thanks & Regards,
    Venkat

    Hi ,
       can you please share your Badi code?
    Saravanan

  • Photoshop.exe 64bit error 0xc000007b on photoshop startup

    I just got a new computer and installed a 15$ trial cd of master suite collection. The 32 bit version of photoshop works fine but when i click on a .psd file that is already created i get this error photoshop.exe 64bit error 0xc000007b the application need to be closed. Is there a solution
    I using Windowss 7 Home pre 64bit.
    system specs; windows 7 homepre 64bit 6gb ddr2 ram processor amd phneom 965 graphic card this nvdia geforce gt 220

    That error is usually caused by a bad registry error.
    You wrote that you installed Photoshop on the new computer. The next sentence you wrote you installed the master suite try out. Did you actually install CS4 then installed the master suite over that? Little confused here.
    You cannot install the master suite over the CS4 already installed because the master suite already has CS4 installed as a package. That may be where your error is at.
    Anyways here is a link to the creative suite forums. They may be able to help you out better.
    http://forums.adobe.com/community/creativesuites/creativesuites_windows

  • Not possible to download Adobe Photoshop CC. Error during dowload... is it possible to dowload an .exe / msi form other computer ??

    Hi,
    My customer have a bad internet connexion.
    It's not possible to dowload Adobe photoshop CC without error.
    Is it possible to dowload an .exe / msi of Photoshop CC from another computer and using DVD / usbkey to transfert the file to his computer to make the installation ?
    It's a critical problem...
    Thanks a lot for your help.
    Regards, Julien

    Thx a lot Mylenium !
    Problem is solved

  • Adobe Photoshop CS6: Photoshop.exe - System Error  The program can't start because ONCoreFoundation7

    I get this error after updating ONONE premium edition 8 to 8.1
    been to their site no luck in resoving error.
    I click ok to error PS cs6 still launches, just annoying.
    ONCoreFoundation7.dll  is part of ONONE 7

    after updating ONONE premium edition 8 to 8.1
    does not say windows 8 or 8.1
    again, not perfect Suite 7, updating ONONE premium edition 8 to 8.1
    does not say 7
    here's your more info
    I'm trying to fix an error message not covered in the knowledge base.
    I open PS CS6 (after updating to PE 8.1) and I get an error message...
    Adobe Photoshop CS6: Photoshop.exe - System Error
    The program can't start because ONCoreFoundation7.dll is missing
    from your computer. Try reinstalling the program to fix this problem
    I followed instructions in this article, but still get the error, it doesn't stop PS from launching after clicking ok.
    Does anyone know the fix? I even tried reinstalling PE 8.1.
    PE=Premium Edition

  • Photoshop CS3 Initialization Error

    Successfully installed & activated Photoshop CS3  on a new PC with a fresh Windows 7 Pro 64bit installation, along with Photoshop CS3 10.0.1 & Bridge CS3 2.1.1.9 updates.  Bridge runs fine, but Photoshop returns the following error when attempting to launch the program, "Could not initialize Photoshop because of a program error."  Attempted to resolve by the following steps:
    Remove/reinstall CS3 in root directory
    Remove/reinstall CS3
    Disable TWAIN driver
    Downloaded & installed latest NVidia video card drivers.
    Noticed the following message in PSErrorLog.txt every time Photoshop CS3 is launched, "2013:10:31 09:41:33 : ..\..\sources\OWLPanelManager.cpp : 1602 : REQUIRE failed"  Downloaded & installed AdobeOwl.dll for this reason, but without success. 
    ALM.log prinout indicates that several steps failed, but I do not know whether this is a problem or how it might be resolved:
    2013-10-31 09:08:41 [4064] ALM: _info_: ==========================================
    2013-10-31 09:08:41 [4064] ALM: _info_: Start ALM 2.1 Release (build 2.1.2.1082)
    2013-10-31 09:08:41 [4064] ALM: _info_:      TYPE = 1
    2013-10-31 09:08:41 [4064] ALM: _info_:      GUID = License-GUID-Photoshop-CS3-Win
    2013-10-31 09:08:41 [4064] ALM: _info_:      LANG = en_US
    2013-10-31 09:08:41 [4064] ALM: _info_: Load AdobeConfig (version = 1.3)
    2013-10-31 09:08:41 [4064] ALM: _info_: Use Serial Number In PCD
    2013-10-31 09:08:42 [4064] ALM: _info_: Find License (type = 0x01, property = 0x00, status = 0x00)
    2013-10-31 09:08:42 [4064] ALM: _info_: Start License Session Succeed!
    2013-10-31 09:08:42 [4064] ALM: _info_: Query Feature Photoshop_Premium (version = 10.0) Failed (status = -5)
    2013-10-31 09:08:42 [4064] ALM: _info_: Query Feature Photoshop_Standard (version = 10.0) Succeed
    2013-10-31 09:08:42 [4064] ALM: _info_: Query Feature Bridge_Base (version = 2.0) Succeed
    2013-10-31 09:08:42 [4064] ALM: _info_: Query Feature Bridge_CameraRaw (version = 2.0) Succeed
    2013-10-31 09:08:42 [4064] ALM: _info_: Query Feature MobileCenter_Base (version = 1.0) Succeed
    2013-10-31 09:18:20 [3180] ALM: _info_: ==========================================
    2013-10-31 09:18:20 [3180] ALM: _info_: Start ALM 2.1 Release (build 2.1.5.1504)
    2013-10-31 09:18:20 [3180] ALM: _info_:      TYPE = 2
    2013-10-31 09:18:20 [3180] ALM: _info_: Start License Session Succeed!
    2013-10-31 09:18:20 [3180] ALM: _info_: Query Feature Bridge_Base (version = 2.0) Succeed
    2013-10-31 09:18:20 [3180] ALM: _info_: Query Feature Bridge_Base (version = 2.0) Succeed
    2013-10-31 09:18:20 [3180] ALM: _info_: Query Feature Bridge_ColorSettings (version = 2.0) Failed (status = -5)
    2013-10-31 09:18:20 [3180] ALM: _info_: Query Feature Bridge_CameraRaw (version = 2.0) Succeed
    2013-10-31 09:18:20 [3180] ALM: _info_: Query Feature Bridge_PhotoshopElements (version = 2.0) Failed (status = -5)
    2013-10-31 09:18:45 [3180] ALM: _info_:
    2013-10-31 09:18:45 [3180] ALM: _info_: End License Session!
    2013-10-31 09:18:45 [3180] ALM: _info_: End ALM
    2013-10-31 09:18:45 [3180] ALM: _info_: ==========================================
    AMT.log report is as follows:
    2013-10-31 09:41:20 [3264]  AMT: START SESSION, library version 1.0.0.1082,46.278103
    2013-10-31 09:41:20 [3264]  AMT: Initializing C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\ [en_US]
    2013-10-31 09:41:20 [3264]  AMT: Adobe License Manager version 2.1 (build 2.1082) RELEASE
    2013-10-31 09:41:20 [3264]  /AMT0069688654/ {30C4B843-28DA-466F-AFCA-CB0ED153C826}
    2013-10-31 09:41:20 [3264]  /AMT0194694755/ {30C4B843-28DA-466F-AFCA-CB0ED153C826}
    2013-10-31 09:41:20 [3264]  /AMT0073107491/ {30C4B843-28DA-466F-AFCA-CB0ED153C826}
    2013-10-31 09:41:20 [3264]  /AMT0087759331/ {30C4B843-28DA-466F-AFCA-CB0ED153C826}
    2013-10-31 09:41:20 [3264]  /AMT0051932803/ License-GUID-Photoshop-CS3-Win
    2013-10-31 09:41:20 [3264]  /AMT0186350190/
    2013-10-31 09:41:20 [3264]  /AMT0013778542/
    2013-10-31 09:41:20 [3264]  /AMT0141832179/ C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\AMT
    2013-10-31 09:41:20 [3264]  /AMT0166617427/ C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\AMT\application.sif
    2013-10-31 09:41:20 [3264]  /AMT0268432926/ 91198956814627932656
    2013-10-31 09:41:20 [3264]  /AMT0172021198/
    2013-10-31 09:41:20 [3264]  /AMT0201805758/
    2013-10-31 09:41:20 [3264]  /AMT0013754766/
    2013-10-31 09:41:20 [3264]  /AMT0088421566/
    2013-10-31 09:41:20 [3264]  /AMT0171050355/
    2013-10-31 09:41:33 [3520]  AMT: START SESSION, library version 1.0.0.1082,46.278103
    2013-10-31 09:41:33 [3520]  AMT: Initializing C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\ [en_US]
    2013-10-31 09:41:33 [3520]  AMT: Adobe License Manager version 2.1 (build 2.1082) RELEASE
    2013-10-31 09:41:33 [3520]  /AMT0069688654/ {30C4B843-28DA-466F-AFCA-CB0ED153C826}
    2013-10-31 09:41:33 [3520]  /AMT0194694755/ {30C4B843-28DA-466F-AFCA-CB0ED153C826}
    2013-10-31 09:41:33 [3520]  /AMT0073107491/ {30C4B843-28DA-466F-AFCA-CB0ED153C826}
    2013-10-31 09:41:33 [3520]  /AMT0087759331/ {30C4B843-28DA-466F-AFCA-CB0ED153C826}
    2013-10-31 09:41:33 [3520]  /AMT0051932803/ License-GUID-Photoshop-CS3-Win
    2013-10-31 09:41:33 [3520]  /AMT0186350190/
    2013-10-31 09:41:33 [3520]  /AMT0013778542/
    2013-10-31 09:41:33 [3520]  /AMT0141832179/ C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\AMT
    2013-10-31 09:41:33 [3520]  /AMT0166617427/ C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\AMT\application.sif
    2013-10-31 09:41:33 [3520]  /AMT0268432926/ 91198956814627932656
    2013-10-31 09:41:33 [3520]  /AMT0172021198/
    2013-10-31 09:41:33 [3520]  /AMT0201805758/
    2013-10-31 09:41:33 [3520]  /AMT0013754766/
    2013-10-31 09:41:33 [3520]  /AMT0088421566/
    2013-10-31 09:41:33 [3520]  /AMT0171050355/
    Any suggestions to resolve this dilemma are appreciated. 

    I managed to resolve the Photoshop CS3 initialization error by reinstalling Windows 7 Pro 64-bit from scratch.  This took a lot of time, but it amounted to less effort than I had spent troubleshooting the problem. 

  • Photoshop CS4 - Application Error

    I just installed the CS4 Creative Suite 4. Everytime i try to launch photoshop cs4 i recieve an "Photoshop.exe Application Error." This error refferences 0x6963561b and that memory cannot be read at 0x0000008c. Can anyone please help me with this?? I have not even been able to use photoshop yet. I have already tried uninstalling and reinstalling the suite and I get the same results... Please help.
    Thanks for your time and help with this matter.
    R

    You don't have the correct secrutiy privileges:
    You have to install PS as Admin on Vista/Windows 7. When you first install the software don't run it. Go to your DVD drive and explore. Look for the PS folder and find the .exe install file. Right click on this and choose run as Admin. (there is a difference between being a admin on a computer and installing software in the Admin mode)
    So when you first start PS in Vista/Windows 7 you have to run the software in Admin mode to get all the privileges.
    Right click on the PS icon, choose properties, compatibility tab and then check Run this program as an administrator. Click Apply then OK to close. Then restart PS.
    Don't forget to update PS CS4 to 11.01.

  • Photoshop CS4 Startup Error

    Hello guys i need help with this error when i startup Photoshop i get this : Photoshop.exe - Application error
                                                                                                                The exception unknown software exception (0xc06d007e) occured in the application at location 0x7c812afb. CAN SOME1 HELP!

    I got it on WIndows XP plz i dont understand your answer this is the correct version

  • Photoshop.exe Application Error

    Open image in CS4, after a couple of minutes a dialog box opens, Photoshop.exe - Application Error, how to fix please?

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Photoshop CS4:Fatal error

    This pops up when I open my Photoshop CS4:
    Fatal error - missing component: /Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework.
    Any ideas on what i can do? happens when I open a project.
    Thanks

    Ok, after reading tons of threads trying to get a simple answer here are the main points:
    You do not need to reinstall anything.
    Locate a backup , Time Machine or anyplace where you may have a backup of your Adobe Suite Install.
    In both Locations( Hard Drive and Backup) Navigate to: Macintosh HD > Library > Application Support > Adobe > Adobe Version Cue CS4 > Client
    Once there you will see your problem Adobe is looking for  folder named 4.0.0 and you have 4.0.1
    Fix: Find the backup and copy over folder named "4.0.0" , Problem solved!
    Open up Adobe Photoshop CS4 and problem should be fixed.
    Observations:
    Upon inspecting folder 4.0.1, I did notice there were exactly 5 (.framework) files just like in folder 4.0.0 with the exception of 4.0.0 having a "Dictionaries" folder. where 4.0.1 has this folder missing. I am not sure how important this particular folder may be, However if by any chance you do not have a backup It might be possible to just change the 4.0.1 folders name to 4.0.0. and this just might work, In theory that is . Good Luck!

  • Opening a smart object (photoshop cc layer) in camera RAW?

    Opening a smart object (photoshop cc layer) in camera RAW? I have opened a processed RAW file from lightroom into photoshop cc, then done various processing and created a merged layer. I've then convered this layer to smart object (it displays the smart object layer icon). When I double-click this layer thumbnail it opens up in a seperate photoshop tab and I want to go back to RAW. I've tried this on various files and I can't seem to reopen smart objects back in RAW. I have file handling preferences set to "prefer adobe camera raw for supported raw files" and have done a fair amount of 'googling' but not getting anywhere. Thanks for any help

    Try the Filter menu item then select Camera Raw Filter. it should then open in ACR for further editing. No it is not the RAW image but the smart object you have.

  • Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

    Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

    Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
    Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
    You can double check this yourself:
    First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
    Keeping Photoshop Up-To-Date
    If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
    Photoshop Help | Digital Negative (DNG)
    The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
    -Noel

  • Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop  After restart error message appears:  - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

    PROBLEM: Cannot print from Photoshop
    After restart error message appears:
    — “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
    • All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
    The printer printed fine until about 2 weeks ago when this error message appeared.  Printing continues from Pages, I-photo, preview etc. —  only Photoshop fails.
    The printer has been turned on and off, as have open documents been closed and open etc..   Preferences reset.  Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
    Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
    Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
    Attempting unsuccessfully to print to Epson 3880
    What Adobe support will be of help.
    Robert Darling —  2/19, 20, 21,22,23/2015

    Probably best to ask in Photoshop General Discussion
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Printing java layer error stack in a custom module!--Experts, please reply!

    Hi to all OAF experts,
    We are in a process of making a fully customized module, which is integrated with OM and other modules, and takes the place of Quoting module. There is beasically a custom module which takes the place Quoting module in Apps in Order to cash cycle. Now in the final page of this module where we submit the quote, we need to through the entire Java layer error stack, similar to what is done in stanadard quoting module. There they use AOLMessageManager class for this purpose. But since quoting module is in JTT/JTF framework and our custom module is in OAF , we were looking for alternatives.
    I was going through oaf doc and i found a class called OAExceptionUtils, which contains a method called processAOLJErrorStack(ErrorStack)
    As per the documentation it says --"Returns an OAException representing the error stack populated by the Oracle Applications user session context AppsContext. ", that is exactly what we need. But , when i use this method, i get error stack as null! Any idea y this is happening? Any alternative how to get this done!
    --Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Hi Mani,
    What is the source (technology source) of the error?
    This is OAF.In a way we have developed entire quoting module from scrath .I believe you would be embedding the Quoting (JTF) pages on to your custom OAF pages. This is similar to how it is implemented in the Standard Sales module.
    We are using same quoting APis to create quote. Our code only goes in JTF tech only while entering in and of configurator.Is your requirement to read the java error stack (JTF Code) from the standard quoting application (embedded in your custom OAF Page) in your Custom page's controller (OAF Code)?
    Yes, we can create quotes from quoting as well as from our custom table,the only difference is that if you create aquote from quoting, it does not updates our custom tables. We want to throw the same java error which quoting throws, while submitting a code in our oaf controller. It throws even Order management error messages!Any idea how we can go about this..!
    --Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

Maybe you are looking for