Photoshop CC Mac - Changer l'opacité par les chiffres sur Macbook Pro Retina.

Bonsoir,
récent propriétaire d'un Macbook Pro Retina (version française AZERTY), je ne peux trouver un moyen de changer l'opacité en entrant les chiffres, comme 1 pour 10% ou 8 pour 80%.
Je pense que le problème vient du fait que je n'ai pas de pavé numérique.
Par exemple, sur l'outil pinceau, si j'entre 1 (en appuyant sur Shift + &), je change le flow à 10% et ainsi de suite, mais je n'ai pas trouvé un raccourci pour changer l'opacité.
Sur l'outil de déplacement, si j'entre 1 (en appuyant sur Shift + &), l'opacité du calque actif ne change pas.
Dois-je acheter un pavé numérique additionnel ?
Cordialement.

Bon, je pense avoir trouver une application incroyable qui résoud le problème, à la condition d'avoir un iPhone.
L'application se nomme Numberkey, gratuite sur App Store iPhone.
Il faut ensuite télécharger le logiciel Numberkey Connect, trouvable ici : http://numberkey.softpedia.com
Ainsi la connection se fait via le wifi.
Et ca marche !
Je peux désormais contrôler de mon iPhone, l'opacité et le flow de mes calques et de mes brushes !!
Je n'en reviens toujours pas... en croisant tout de même les doigts que cela ne fera point planter Photoshop.
Bien à vous.

Similar Messages

Photoshop CS6 a little 'jerky' when moving layers & resizing window (Macbook Pro Retina 650m)

As title says, when I open Photoshop CS6 and simple make a new layer and either use the type tool, it appears to be a little Sluggish/Jerky when moving the layer around.. The same applies when resizing photoshop itself.
I'm updated to the latest version of CS6 and have tried all the combinations in the 'Performance' section of Photoshop.
My Macbook Pro Retina is the 3.4ghz 650m and 8GB RAM offering (OS Mavericks). It's really annoying me as even my old laptop could run it smoothly and that was an i5 and much lower-end graphics card.
The only way I can really describe it (and i'm no tech professional) is when comparing it to silky smooth 60 fps, it looks like it's skipping frames and in term looking 'jerky'. I also use Illustrator and don't really witness the same problem with it.
I know this may have been asked quite a bit.. But I've never found the solution.. Could anybody advise me on what it potentially could be down too? (Might I add the laptop has just had a fresh install of the OS and a fresh copy of CS6)

You could check through the GPU FAQ for anything you might have missed
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html
You say you have tried all settings in Performance, but I wonder what your cache levels are set at? If more than 1, then OK.
There's the general performance FAQ (no doubt lots of overlap)
http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html
Is this with all image docs, or particular ones? For instance I have been playing with using ACR to process 32bit HDR files, and it puts a huge load on the system.

Changing opacity and flow by taping numbers on a Macbook Pro Retina.

Hi everyone,
it is surely a easy answer but i can't find a way to change opacity by taping numbers on my Macbook Pro Retina (French version AZERTY).
I think the problem comes from the fact that i don't have a numeric keypad.
For instance, on the brush tool, if i enter 1 (by pressing shift+&), i change the flow to 10% and so on, but i didn't find a shortcut to change the opacity.
On the move tool, if i enter 1 (by pressing shift+&), the opacity of the active layer don't change.
I am nearly sure that the problem comes from the Macbook Pro Retina keyboard, so do i have to buy a additionnal numeric keypad ?
Regards.

What version of photoshop are you using?
Is your version of photoshop also french?
Actually i don't think you should need the numeric keypad.
Added:
Maybe your right about needing the numeric keypad after all.
A quick test in cs6 seems to indicate that.
You might also ask over on the french forum:
http://forums.adobe.com/community/international_forums/francais
Message was edited by: R_Kelly

I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported. Please choose a different volume for installation." I am f

I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported. Please choose a different volume for installation." I am further told that "Adobe apps cannot be installed on case-sensitive drives, you need to Install the product onto an HFS+ or HFSJ non-case-sensitive drive."
What I don't understand is this: I originally bought and installed Photoshop CS6 back in March 2013, and it worked fine. Yesterday my hard drive had to be replaced and my computer person salvaged as much of what was on it as he could, but now I have to reinstall Photoshop. 1) Why did it work before and it's not working now? 2) Is there anything I can do that does not involve reformatting the hard drive?

It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium

Text keeps disappearing when I select it to make type at all / make changes / edit. Type tool is not working. I am running CS6 on a Macbook Pro Retina (which I am hating!) 10.9.4 - wish I'd never upgraded.

Text keeps disappearing when I select it to make type at all / make changes / edit. Type tool is not working. I am running CS6 on a Macbook Pro Retina (which I am hating!) 10.9.4 - wish I'd never upgraded.
Photoshop General Discussion

The RAM needs specs as shown below.
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

Macbook pro retina haswell 13 lag using (Photoshop)

Hi ALL,
MY macbook pro retina display haswell (13 in) lags while using Adobe Photoshop CC (V 14.1.2 x64). I have no other applications open except photoshop. Is this normal for this model? i was told by apple that photoshop would not lag when editing. I was editing a 4 mb file . Moving the file and using brush causes lag.
Any solution?
Macbook pro retina 13 specs:
Processor 2.4 GHz Intel Core i5
Memory 8 GB 1600 MHz DDR3
Graphics Intel Iris 1024 MB
Software OS X 10.9
HDD 256gb ssd

Sorry for the double post, but I can't find an edit button and I recently found a solution to this issue in a discussion on the Photoshop forums.
http://www.versluis.com/2013/08/how-to-fix-brush-lag-in-photoshop-cc/
Basically, Photoshop CC has a setting for how it uses the on board graphics for drawing.
Preferences->Performance->Advanced Settings
Set drawing mode to Basic (the default is Advanced)
Close Photoshop (like really close it -> Command+Q it!) As a new Mac user, I was confused by this step... I thought the little red X would close the program. Luckily a co-worker who was helping me with this issue pointed out that I wasn't actually closing the program.
Restart Photoshop. This fixed the lag I was experiencing.

I use a macbook pro retina. before i upgraded to maverick my windows stayed the way i put them. now after upgrade i have to resize every time i change the window. i use a 32in. monitor and use it full screen.

I use a macbook pro retina. I use a 32 in. monitor and use it full screen. I size the screen manually. Since i upgraded to maverick, I have to resize the screen each time I change windows.Before the upgrade the screen stayed where I put it.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Cargué Adobe Creative Suite 6 (Edición para estudiantes y profesores, comprado en una Apple Store en Mexico) en una MacBook Pro, hace 14 meses; he cambiado de computadora a una MacBook Pro (retina). Primero desinstalé el software de la primera computadora

Cargué Adobe Creative Suite 6 (Edición para estudiantes y profesores, comprado en una Apple Store en Mexico) en una MacBook Pro, hace 14 meses; he cambiado de computadora a una MacBook Pro (retina). Primero desinstalé el software de la primera computadora (desactivación total desde "aplicaciones/Utilidades/adobe/desinstalar) después instalé el software en la nueva máquina pero el código de activación no funcionó. Algún paso me ha fallado. He repetido el proceso y nada. Las dos Mac son de uso personal privado. La vieja la voy a formatear y vender. ¿es necesario un nuevo código de instalación?.... ¿como lo solicito?

Puede que aquí encuentres la solución de tu problema: Serial number, Redemption, and Product codes | Student & Teacher Editions

How do i change registered email address in facetime on macbook pro, how do i change registered email address in facetime on macbook pro

how do i change registered email address in facetime on macbook pro?

Ask in the Facetime for Mac community forum area.

Mac mini or macbook pro retina or imac??

hey guys.... i need your help... i am about to get a mac but i dont know which..... my question is should i buy a mac mini, macbook pro retina 13'' or imac 21.5''??? thx!!!

I appreciate all the responses. I don't do anything graphic heavy on my computer, although at the same time, I've never had a computer powerful enough to run those types of programs. I also use a console for games, but that could change if I had a computer powerful enough to run things smoothly. It is disappointing that the hardware found in the current offerings is much more highly priced than many competitors. However, I'm not a fan of Windows, and I do realize that with Apple's price premium you get great customer service and the ability to bring a malfunctioning computer directly to an Apple store with results that are, on the whole, much better than you would find at a 3rd party repair service for PCs. I also find Apple's OS grossly headache free with a very nice user experience. I'll see what changes may be made soon to the aforementioned devices and I guess I'll go from there. Although I could swing for a rMBP in 15 inch, and typically use computers for years and years before replacing, if I can save money, I always go for that option.

I need to change user name and password on my macbook pro

I need to change user name and password on my Macbook Pro OS version 10.6.8. As I purchased it used and can't remember what user name and password the original owner gave me. I need to install printer drivers and can't until I can sign in.

Reset the computer to the factory condition.
Giving away / Selling your Mac / Resetting the computer to the factory condition
http://support.apple.com/kb/HT5189
http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/

HT5639 I have ordered a macbook pro retina 13 with English (US) keyboard. Please could anyone tell me how to change it to an English+arabic layout keyboard?

I have ordered a macbook pro retina 13 with English (US) keyboard. Please could anyone tell me how to change it to an English+arabic layout keyboard?
I can order an English+Arabic layout mac keyboard, but I do not where can I go asking for this change?
I found another solution to change the keys of keyboard one by one, but I dont want to do it myself. I may destroy it. Any solution?

Cancel your order and re-order one with the desired KB

Hi i cannot change the brightness on my late 2011 macbook pro.

Hi i cannot change the brightness on my late 2011 macbook pro. It is stuck on the lowest level in which i can't view the screen without a flash light. Please i need help how to solve this. I was on my computer when i checked the back which it was really dusty, i tried unscrewing the bottom however some screws were too tight so i took it upon myself and got a rod and startedremoving the dust off the vents and i may have clicked something as i closed the lid on the macbook i could hear the sounds still from the film but the lid was closed as i opened it back up the brightness was on low but sounds were still playing. All the buttons work , all of the F keys, apart from the brightnes keys. I can shine a tourch on the screen and see the display but the brightness will not change but i can see when i click the brightness it says it changes. I have connected it to a spare tv i have via hdmi and i really need help as this is my primary computer and i need it for work when going away. Thank you

Try SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
Ciao.

I am trying to install an update for my macbook pro retina display and my mac wont restart because it says my mail is still open but when i try and open my mail, it wont let me. I think it crashed. Help?

I am trying to install an update for my macbook pro retina display and my mac wont restart because it says my mail is still open but when i try and open my mail, it wont let me. I think it crashed. Help?

Go to: Apple > Force Quit
and select Mail > Force Ouit.

I,m using macbook pro retina, I have changed the language to Arabic but still I find that password and downloading are coming in arabia

I,m using macbook pro retina, I have changed the language from arabic to Endlish through system preference, but still I find that password and downloading are coming in arabia, when I start my computer it show password request in Arabic.

http://support.apple.com/kb/ht4102

Photoshop CC Mac - Changer l'opacité par les chiffres sur Macbook Pro Retina.

Similar Messages

Maybe you are looking for