Photoshop CC not displaying 30bit color

PS CC does not seem to display 30bit color as per the Ramp.psd file from AMD. PS CS6 displays 30bit color just fine. I've seen other posts and problems with AMD FirePro cards but I have an Nvidia Quadro K2000 and I an having the same problem. Has there been any progress on identifing this isuue. Thank you.
NEC PA272W w/displayPort
Nvidia K2000
Win 7 Pro 64bit/no aero
30bit color turned on in Pref's
"Deep Color" on in driver

For generic performance and trouble-shooting advice I’d like to recommend reading these:
http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
As for the specifics:
The image size is 4.31M. If I go to double the size and change nothing else, the image size jumps up to a whopping 17.2M.
If you double the dimensions of an image the area is increased fourfold – so what is the problem there?
The image dimensions are 500px x 135px, 300DPI, 8bit, RGB color. This is at 100% zoom. Those are the settings I normally use, but for some reason it’s showing the file as about half of the size it should be. (Tumblr post for comparison—they are 500px wide.)
The introduction or Retina (and other high resolution) displays and browsers actually up-scaling images to accommodate those screen resolutions seems to have confused some users about the concept of pixels.
Could you please post a full size screenshot on this Forum of the image at View > 100% in Photoshop and on tumblr?

Similar Messages

CS4 extended. Capture One vs Photoshop . How can I be sure that photoshop use my Display icc Color Munki Color Profile?

CS4 extended, OS10.7.5 . When I process an image in Capture One Pro and then open it in Photoshop CS4 extended and compare to my original image in Capture I can see a big difference . ( Darker in C1 and flat in CS4) I contacted Phase One and they said that the problem was probably due to photoshop who do not recognise my Color Munki Display icc profile . How can I be sure that photoshop use my Display icc Color Munki Profile? Thanks !!!

Hello Station_two,
Thanks for you response.
Yes . that's what I did as I created an icc profile with Color Munki .
My problem is when you look at the left image ( Capture One ) and the same images processed and open in Photoshop ( Right image ) I can see a big contrast difference ...
Now, let's assume that photoshop work automatically with my icc Color Munki in display panel , why the image in Capture One do not look the same ? Is it a question of setup in C1 ? In c1 ICC /Process recipe I have Adobe rgb (1998) selected....
Thanks!

Photoshop pics not displaying in iphoto 08

Photoshop pictures are not displaying. Just a black photo appears. However, the photos do appear normal in Apple Preview. Why is this?

scubanut
Back Up and try rebuild the library: hold down the apple and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild the thumbnails.
I can't tell the difference b/n the black and white image that our photographer created in photoshop and the photos that I create in iphoto using the effects black and white feature. I've heard there is a difference and was wondering whether I would notice it more when I printed
I have no idea what such a difference might be, nor would I expect there to be one - but print a couple and compare.
Regards
TD

HDMI output to monitor not displaying all colors

I am trying to use a second monitor on my Satellite S55t-b5152 and am able to get 1920x1080 output from the HDMI port through an adapter to either VGA or DVI into my external monitor, but with either adapter the colors look washed-out and not all the colors that are displayed on the internal monitor show up on the external monitor. For example the position indicator in scroll bar on some apps shows up on the internal monitor, but disappears when I drag that window onto the external monitor. I've tried multiple monitors and they all have the same symptom. I've investigated this some on external forums and it seems to be that the HDMI output under some conditions assumes that it is connected to a TV instead of a monitor and it limits the output color range. On some graphics drivers it is possible to override that assumption and get the full range output from the HDMI port. I haven't found a way to do that for the graphics driver on the S55t-b5152. Has anyone figured this out?

Satellite S55T-B5152
through an adapter to either VGA or DVI...
Just want to comment that I'm not at all surprised that an adapter does not produce true colors. I'm sometimes amazed they work at all.
Yours is HDMI 2.0 which complicates things still further.

CFGrid tag not displaying background color

Hi, My application runs on CF v 4.5 and uses CFGrid tag to
display grids. When I run the same code on MX 7, the grid does not
display the pale yellow background for the grid as it does on 4.5.
Does anyone know how to fix this ?
Thanks, Jay M.

Hi CatJay
I looked at the code you sent and it has no attribute in
place to display any color in the background, so I am guessing that
maybe back in 4.5 there was only 1 colour by default?
Try adding bgcolor="#ffff00" to the cfgrid tag and see if
that changes the colour to yellow. (it should)
Once you get that to work, you can implement any colour you
want.

Tiff (or tif) file created in Photoshop is not displaying in Firefox 2 or 3 with Quicktime plugin

I embedded a tiff file that was created in Photoshop but it is not displaying in Quicktime/Firefox.
It works in other browsers but not Firefox 2 or 3. And another point is that if the Tiff file is created in any other graphics application then it works!
It leads me to think that Photoshop might be adding some metadata to the file that Quicktime/Firefox is not liking.
Any ideas on what might fix this?

There are different types of TIF files with different kinds of contents (compression schemes, channels, bit depths, etc). It is no surprise that you might get different results with different browsers/plugins.
What kind of TIFF are you using? Why are you not using a more standard web image format that does not require the overhead and hassle of an optional plugin?

Tiff (or tif) file created in Photoshop is not displaying in Firefox 2 or 3

I embedded a tiff file that was created in Photoshop but it is not displaying in Quicktime/Firefox.
It works in other browsers but not Firefox 2 or 3. And another point is that if the Tiff file is created in any other graphics application then it works!
It leads me to think that Photoshop might be adding some metadata to the file that Quicktime/Firefox is not liking.
Any ideas on what might fix this? By the way it happens in both Mac and Windows

There are different types of TIF files with different kinds of contents (compression schemes, channels, bit depths, etc). It is no surprise that you might get different results with different browsers/plugins.
What kind of TIFF are you using? Why are you not using a more standard web image format that does not require the overhead and hassle of an optional plugin?

4 random Rows of pixels not displaying correct colors RetinaMBP mid 2012

Dear community, I noticed that my 15' Retina MacBook Pro, mid 2012 has some retina screen issues. As mentioned, 4 randomly possitioned rows (from side to side) of pixels have difficulty displaying the correct colors. It is unnoticable on light and dark backgrounds/images. However when you have color, they show clearly. Two of the rows appear lighter than the image color, the other 2 darker. Sometimes the color is completely different. It also happens under Windows7 Bootcamp and does not display on external monitors = Hardware failure. I have never ever droped, pressed, hit or abused my RMBP, expecially the screen.
Has anyone heard or experienced similar issues?
What could be the problem? Would be okay for a few dead pixels but those are 4 whole rows of pixels. Also they all seemed to fail at ones, not 1 row at a time.
Thanks.

Run your page through the validator here: http://validator.w3.org
You have some structural defects in your code that should be taken care of. If it's still not working once you have the code cleaned, post back and we can take a closer look.

Trial version of photoshop will not display picture, why?

Two days ago I downloaded a trial of Photoshop Creative Cloud. I played for a bit then suddenly the pictures I brought into photoshop would only display in the side bar while the normal display area had a blank transparency. Anyone have any ideas as to why?

Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Display does not display any color

I have just installed the latest Java for Mac OS X 10.5 Update 4 and all the color has disappeared from my display, hence everything is in black and white. I am not absolutely certain but I think that is the last thing I did before the color disappeared. I have run ColorSync Utility and the first aid profile log has found an item to be incorrect but is incapable of crrecting it, claiming that it is locked when it is not. It says
"/Library/Application Support/Adobe/Color/Profiles/Recommended/CoatedFOGRA27.icc
Tag 'desc': Tag size is not correct.
The file is locked. Could not be fixed."
I have also run repair permissions in Disk Utility a number of times. Each time it claims to have repaired a long list of permissions but when I rerun it, it still has to repair the same long list of permissions.
When i log in or restart I have full color so it is only a software problem. I have checked settings in System preferences and they haven't been changed and are set for millions of colors.
Any ideas on what's wrong and how it can be fixed.

dysong2 wrote:
I have just installed the latest Java for Mac OS X 10.5 Update 4 and all the color has disappeared from my display, hence everything is in black and white.
When i log in or restart I have full color so it is only a software problem.
It is not clear at exactly what point you have no colour. You say you have no colour
then you say you have colour after you login or restart.
Dave

Photoshop CC not displaying correct image sizes, among other issues.

Hey, so I'd like a bit of help here!
I got my new laptop from the school a couple of weeks ago and photoshop’s been funky ever since I got it. It’s a brand new Macbook, and it's running Photoshop CC.
First things first, it won’t recognize some of the brushstrokes I make. It will show that I've made them, but they won’t show up in the history panel. I'll have to make another stroke for it to register both of them. (Making undoing things a real pain.) Also, some of the keyboard shortcuts I use won't work in a really similar way. If I go to switch to my brush by pressing b, it occasionally won't register it unless I make an additional brush stroke. This works with all of the other shortcuts I use.
In addition, file sizes are all kinds of messed up. Here’s the most recent example. The image dimensions are 500px x 135px, 300DPI, 8bit, RGB color. This is at 100% zoom. Those are the settings I normally use, but for some reason it’s showing the file as about half of the size it should be. (Tumblr post for comparison—they are 500px wide.)
Here’s another example. This one is 1254 x 1201, 300DPI, 8bit, RGB, shown at 100% zoom. The image size is 4.31M. If I go to double the size and change nothing else, the image size jumps up to a whopping 17.2M. I don’t feel like that’s right? I don't remember any other versions of Photoshop having images be that large.
Maybe it’s my computer settings? Right now I have the resolution set on "best for display," but even if i use the "scaled" option and change sizes, the images are still too small.
I don't know if I would be able to uninstall and then re-install Photoshop because the school has control over those sorts of things and there are certain programs that you cannot remove. I've tried restarting the program as well as the laptop, but neither of those helped.
if anyone can help me, I’d really appreciate it! Thank you!

For generic performance and trouble-shooting advice I’d like to recommend reading these:
http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
As for the specifics:
The image size is 4.31M. If I go to double the size and change nothing else, the image size jumps up to a whopping 17.2M.
If you double the dimensions of an image the area is increased fourfold – so what is the problem there?
The image dimensions are 500px x 135px, 300DPI, 8bit, RGB color. This is at 100% zoom. Those are the settings I normally use, but for some reason it’s showing the file as about half of the size it should be. (Tumblr post for comparison—they are 500px wide.)
The introduction or Retina (and other high resolution) displays and browsers actually up-scaling images to accommodate those screen resolutions seems to have confused some users about the concept of pixels.
Could you please post a full size screenshot on this Forum of the image at View > 100% in Photoshop and on tumblr?

Rich text not displaying in color

I have a text object that has the Paragraph Text Interpretation set to RTF Text. However, when I run the report, all of the text displays as black instead of the colors the user defined. It is supposed to display in red and yellow. All other richtext formats such as bold, italics, etc. display properly. I know the value of the richtext property is set properly because it displays inside a Visual Studio richtextbox properly. I am only having issues with Crystal Reports. Can someone explain how to get the colors to display for a richtext object? I am using Crystal Reports for Visual Studio 2010. Thanks.

i only mentioned a Text Object as that's where a report developer can quickly test what formatting is available in crystal reports.
if you create a new Text Object then you can look at what formatting options are available and you will then know what options are available in RTF. it's pretty limited. in a text object you can change fonts, colours, add tabs, etc. but not really that much more.
since there are lots of tags that won't work try to find an SAP Note that goes over what works and what doesn't. for example, i don't think that the stylesheet tag is support and this could be what's causing the issue. there may be more unsupported tags etc.
for testing create a new test formula to put on your report and then format as RTF. try this syntax first...this does work in cr.
"{\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fnil\fcharset0 Calibri;}}"+
"{\colortbl ;\red255\green0\blue0;}"+
"\viewkind4\uc1\pard\sa200\sl276\slmult1\cf1\lang9\f0\fs22 This is red.\cf0\par"+

Scopes not displaying in color

Neither the Parade/Overlay nor 3d scope are displaying in red, green and blue - instead, the scopes display monotone readings (sort of a golden/brownish hue) for RGB channels.
I can't seem to find any kind of preferences for the scopes - could this problem be due to the fact that I'm using just using the MacBook Pro monitor and not a proper graphics card? Or is there a way to adjust how the scopes display?
Running version 1.5.3. Thanks.

The option to switch from monochrome to color scopes is located in the Setup room in the User Prefs tab.
http://documentation.apple.com/en/color/usermanual/index.html#chapter=8%26sectio n=2%26tasks=true

Photoshop will not print in color

Help! Although my priner settings are set to print in color and teh preview of the document is in color, my printed version will not come out as color. My ink is newly refilled and it is solely a photoshop issue as ive tried printing color with other programs and it is fine.

What kind of color handling are you using?
Julia

Photoshop CS5 not printing in color!!!

I'm running Mac 10.7.5, with Photoshop CS5. My printer is a Brother MFC-J435W. Until just recently, I've not had any problem printing anything. But a few days ago I can't get the printer to print in color off of Photoshop. Any other program (LibreOffice, Preview, etc...) it prints color images just fine. But all Photoshop documents for the past week have been coming out black and white. I've checked and double checked all the Print dialog settings, and they're all set for color. Puzzled and annoyed does not accurately express things... Help! And thank you in advance...

You have enabled "Photoshop manages color" and are using a specific color profile...
Mylenium

Photoshop CC not displaying 30bit color

Similar Messages

Maybe you are looking for